diff mbox

[v5,2/3] platform: add video-multiplexer subdevice driver

Message ID 1495034107-21407-2-git-send-email-p.zabel@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Philipp Zabel May 17, 2017, 3:15 p.m. UTC
This driver can handle SoC internal and external video bus multiplexers,
controlled by mux controllers provided by the mux controller framework,
such as MMIO register bitfields or GPIOs. The subdevice passes through
the mbus configuration of the active input to the output side.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
No changes since v4 [1]:

This patch depends on the mux subsystem [2] and on the mmio-mux driver [3]
to work on i.MX6. The follow-up patch will make this usable until the mux
framework is merged.

[1] https://patchwork.kernel.org/patch/9712131/
[2] https://patchwork.kernel.org/patch/9725911/
[3] https://patchwork.kernel.org/patch/9725893/
---
 drivers/media/platform/Kconfig     |   6 +
 drivers/media/platform/Makefile    |   2 +
 drivers/media/platform/video-mux.c | 295 +++++++++++++++++++++++++++++++++++++
 3 files changed, 303 insertions(+)
 create mode 100644 drivers/media/platform/video-mux.c

Comments

Sakari Ailus May 18, 2017, 9:48 p.m. UTC | #1
Hi Philipp,

Thanks a lot for the update! Just a few really minor comments below. After
fixing them you can add:

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>

On Wed, May 17, 2017 at 05:15:06PM +0200, Philipp Zabel wrote:
> This driver can handle SoC internal and external video bus multiplexers,
> controlled by mux controllers provided by the mux controller framework,
> such as MMIO register bitfields or GPIOs. The subdevice passes through
> the mbus configuration of the active input to the output side.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
> ---
> No changes since v4 [1]:
> 
> This patch depends on the mux subsystem [2] and on the mmio-mux driver [3]
> to work on i.MX6. The follow-up patch will make this usable until the mux
> framework is merged.
> 
> [1] https://patchwork.kernel.org/patch/9712131/
> [2] https://patchwork.kernel.org/patch/9725911/
> [3] https://patchwork.kernel.org/patch/9725893/
> ---
>  drivers/media/platform/Kconfig     |   6 +
>  drivers/media/platform/Makefile    |   2 +
>  drivers/media/platform/video-mux.c | 295 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 303 insertions(+)
>  create mode 100644 drivers/media/platform/video-mux.c
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index ac026ee1ca074..259c0ff780937 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -74,6 +74,12 @@ config VIDEO_M32R_AR_M64278
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called arv.
>  
> +config VIDEO_MUX
> +	tristate "Video Multiplexer"
> +	depends on OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER && MULTIPLEXER

It'd be nice to have this split (over 80).

> +	help
> +	  This driver provides support for N:1 video bus multiplexers.
> +
>  config VIDEO_OMAP3
>  	tristate "OMAP 3 Camera support"
>  	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index 63303d63c64cf..a6363023f981e 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -28,6 +28,8 @@ obj-$(CONFIG_VIDEO_SH_VEU)		+= sh_veu.o
>  
>  obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
>  
> +obj-$(CONFIG_VIDEO_MUX)			+= video-mux.o
> +
>  obj-$(CONFIG_VIDEO_S3C_CAMIF) 		+= s3c-camif/
>  obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) 	+= exynos4-is/
>  obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
> diff --git a/drivers/media/platform/video-mux.c b/drivers/media/platform/video-mux.c
> new file mode 100644
> index 0000000000000..e35ffa18126f3
> --- /dev/null
> +++ b/drivers/media/platform/video-mux.c
> @@ -0,0 +1,295 @@
> +/*
> + * video stream multiplexer controlled via mux control
> + *
> + * Copyright (C) 2013 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + * Copyright (C) 2016-2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/mux/consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +struct video_mux {
> +	struct v4l2_subdev subdev;
> +	struct media_pad *pads;
> +	struct v4l2_mbus_framefmt *format_mbus;
> +	struct mux_control *mux;
> +	struct mutex lock;
> +	int active;
> +};
> +
> +static inline struct video_mux *v4l2_subdev_to_video_mux(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct video_mux, subdev);
> +}
> +
> +static int video_mux_link_setup(struct media_entity *entity,
> +				const struct media_pad *local,
> +				const struct media_pad *remote, u32 flags)
> +{
> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	int ret = 0;
> +
> +	/*
> +	 * The mux state is determined by the enabled sink pad link.
> +	 * Enabling or disabling the source pad link has no effect.
> +	 */
> +	if (local->flags & MEDIA_PAD_FL_SOURCE)
> +		return 0;
> +
> +	dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]",
> +		remote->entity->name, remote->index, local->entity->name,
> +		local->index, flags & MEDIA_LNK_FL_ENABLED);
> +
> +	mutex_lock(&vmux->lock);
> +
> +	if (flags & MEDIA_LNK_FL_ENABLED) {
> +		if (vmux->active == local->index)
> +			goto out;
> +
> +		if (vmux->active >= 0) {
> +			ret = -EBUSY;
> +			goto out;
> +		}
> +
> +		dev_dbg(sd->dev, "setting %d active\n", local->index);
> +		ret = mux_control_try_select(vmux->mux, local->index);
> +		if (ret < 0)
> +			goto out;
> +		vmux->active = local->index;
> +	} else {
> +		if (vmux->active != local->index)
> +			goto out;
> +
> +		dev_dbg(sd->dev, "going inactive\n");
> +		mux_control_deselect(vmux->mux);
> +		vmux->active = -1;
> +	}
> +
> +out:
> +	mutex_unlock(&vmux->lock);
> +	return ret;
> +}
> +
> +static struct media_entity_operations video_mux_ops = {

const.

> +	.link_setup = video_mux_link_setup,
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int video_mux_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	struct v4l2_subdev *upstream_sd;
> +	struct media_pad *pad;
> +
> +	if (vmux->active == -1) {
> +		dev_err(sd->dev, "Can not start streaming on inactive mux\n");
> +		return -EINVAL;
> +	}
> +
> +	pad = media_entity_remote_pad(&sd->entity.pads[vmux->active]);
> +	if (!pad) {
> +		dev_err(sd->dev, "Failed to find remote source pad\n");
> +		return -ENOLINK;
> +	}
> +
> +	if (!is_media_entity_v4l2_subdev(pad->entity)) {
> +		dev_err(sd->dev, "Upstream entity is not a v4l2 subdev\n");
> +		return -ENODEV;
> +	}
> +
> +	upstream_sd = media_entity_to_v4l2_subdev(pad->entity);
> +
> +	return v4l2_subdev_call(upstream_sd, video, s_stream, enable);
> +}
> +
> +static const struct v4l2_subdev_video_ops video_mux_subdev_video_ops = {
> +	.s_stream = video_mux_s_stream,
> +};
> +
> +static struct v4l2_mbus_framefmt *
> +__video_mux_get_pad_format(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_pad_config *cfg,
> +			   unsigned int pad, u32 which)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +
> +	switch (which) {
> +	case V4L2_SUBDEV_FORMAT_TRY:
> +		return v4l2_subdev_get_try_format(sd, cfg, pad);
> +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> +		return &vmux->format_mbus[pad];
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int video_mux_get_format(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_pad_config *cfg,
> +			    struct v4l2_subdev_format *sdformat)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +
> +	mutex_lock(&vmux->lock);
> +
> +	sdformat->format = *__video_mux_get_pad_format(sd, cfg, sdformat->pad,
> +						   sdformat->which);

You could align to opening parenthesis on previous line.

> +
> +	mutex_unlock(&vmux->lock);
> +
> +	return 0;
> +}
> +
> +static int video_mux_set_format(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_pad_config *cfg,
> +			    struct v4l2_subdev_format *sdformat)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	struct v4l2_mbus_framefmt *mbusformat;
> +	struct media_pad *pad = &vmux->pads[sdformat->pad];
> +
> +	mbusformat = __video_mux_get_pad_format(sd, cfg, sdformat->pad,
> +					    sdformat->which);
> +	if (!mbusformat)
> +		return -EINVAL;
> +
> +	mutex_lock(&vmux->lock);
> +
> +	/* Source pad mirrors active sink pad, no limitations on sink pads */
> +	if ((pad->flags & MEDIA_PAD_FL_SOURCE) && vmux->active >= 0)
> +		sdformat->format = vmux->format_mbus[vmux->active];
> +
> +	*mbusformat = sdformat->format;
> +
> +	mutex_unlock(&vmux->lock);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops video_mux_pad_ops = {
> +	.get_fmt = video_mux_get_format,
> +	.set_fmt = video_mux_set_format,
> +};
> +
> +static const struct v4l2_subdev_ops video_mux_subdev_ops = {
> +	.pad = &video_mux_pad_ops,
> +	.video = &video_mux_subdev_video_ops,
> +};
> +
> +static int video_mux_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *ep;
> +	struct video_mux *vmux;
> +	unsigned int num_pads = 0;
> +	int ret;
> +	int i;
> +
> +	vmux = devm_kzalloc(dev, sizeof(*vmux), GFP_KERNEL);
> +	if (!vmux)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, vmux);
> +
> +	v4l2_subdev_init(&vmux->subdev, &video_mux_subdev_ops);
> +	snprintf(vmux->subdev.name, sizeof(vmux->subdev.name), "%s", np->name);
> +	vmux->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	vmux->subdev.dev = dev;
> +
> +	/*
> +	 * The largest numbered port is the output port. It determines
> +	 * total number of pads.
> +	 */
> +	for_each_endpoint_of_node(np, ep) {
> +		struct of_endpoint endpoint;
> +
> +		of_graph_parse_endpoint(ep, &endpoint);
> +		num_pads = max(num_pads, endpoint.port + 1);
> +	}
> +
> +	if (num_pads < 2) {
> +		dev_err(dev, "Not enough ports %d\n", num_pads);
> +		return -EINVAL;
> +	}
> +
> +	vmux->mux = devm_mux_control_get(dev, NULL);
> +	if (IS_ERR(vmux->mux)) {
> +		ret = PTR_ERR(vmux->mux);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get mux: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mutex_init(&vmux->lock);
> +	vmux->active = -1;
> +	vmux->pads = devm_kcalloc(dev, num_pads, sizeof(*vmux->pads),
> +				  GFP_KERNEL);
> +	vmux->format_mbus = devm_kcalloc(dev, num_pads,
> +					 sizeof(*vmux->format_mbus),
> +					 GFP_KERNEL);
> +
> +	for (i = 0; i < num_pads - 1; i++)
> +		vmux->pads[i].flags = MEDIA_PAD_FL_SINK;
> +	vmux->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE;
> +
> +	vmux->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
> +	ret = media_entity_pads_init(&vmux->subdev.entity, num_pads,
> +				     vmux->pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	vmux->subdev.entity.ops = &video_mux_ops;
> +
> +	return v4l2_async_register_subdev(&vmux->subdev);
> +}
> +
> +static int video_mux_remove(struct platform_device *pdev)
> +{
> +	struct video_mux *vmux = platform_get_drvdata(pdev);
> +	struct v4l2_subdev *sd = &vmux->subdev;
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id video_mux_dt_ids[] = {
> +	{ .compatible = "video-mux", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, video_mux_dt_ids);
> +
> +static struct platform_driver video_mux_driver = {
> +	.probe		= video_mux_probe,
> +	.remove		= video_mux_remove,
> +	.driver		= {
> +		.of_match_table = video_mux_dt_ids,
> +		.name = "video-mux",
> +	},
> +};
> +
> +module_platform_driver(video_mux_driver);
> +
> +MODULE_DESCRIPTION("video stream multiplexer");
> +MODULE_AUTHOR("Sascha Hauer, Pengutronix");
> +MODULE_AUTHOR("Philipp Zabel, Pengutronix");
> +MODULE_LICENSE("GPL");
Pavel Machek May 18, 2017, 11:37 p.m. UTC | #2
On Wed 2017-05-17 17:15:06, Philipp Zabel wrote:
> This driver can handle SoC internal and external video bus multiplexers,
> controlled by mux controllers provided by the mux controller framework,
> such as MMIO register bitfields or GPIOs. The subdevice passes through
> the mbus configuration of the active input to the output side.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Acked-by: Pavel Machek <pavel@ucw.cz>
Sebastian Reichel May 20, 2017, 12:36 p.m. UTC | #3
Hi,

On Wed, May 17, 2017 at 05:15:06PM +0200, Philipp Zabel wrote:
> This driver can handle SoC internal and external video bus multiplexers,
> controlled by mux controllers provided by the mux controller framework,
> such as MMIO register bitfields or GPIOs. The subdevice passes through
> the mbus configuration of the active input to the output side.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

-- Sebastian

> ---
> No changes since v4 [1]:
> 
> This patch depends on the mux subsystem [2] and on the mmio-mux driver [3]
> to work on i.MX6. The follow-up patch will make this usable until the mux
> framework is merged.
> 
> [1] https://patchwork.kernel.org/patch/9712131/
> [2] https://patchwork.kernel.org/patch/9725911/
> [3] https://patchwork.kernel.org/patch/9725893/
> ---
>  drivers/media/platform/Kconfig     |   6 +
>  drivers/media/platform/Makefile    |   2 +
>  drivers/media/platform/video-mux.c | 295 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 303 insertions(+)
>  create mode 100644 drivers/media/platform/video-mux.c
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index ac026ee1ca074..259c0ff780937 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -74,6 +74,12 @@ config VIDEO_M32R_AR_M64278
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called arv.
>  
> +config VIDEO_MUX
> +	tristate "Video Multiplexer"
> +	depends on OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER && MULTIPLEXER
> +	help
> +	  This driver provides support for N:1 video bus multiplexers.
> +
>  config VIDEO_OMAP3
>  	tristate "OMAP 3 Camera support"
>  	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index 63303d63c64cf..a6363023f981e 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -28,6 +28,8 @@ obj-$(CONFIG_VIDEO_SH_VEU)		+= sh_veu.o
>  
>  obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
>  
> +obj-$(CONFIG_VIDEO_MUX)			+= video-mux.o
> +
>  obj-$(CONFIG_VIDEO_S3C_CAMIF) 		+= s3c-camif/
>  obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) 	+= exynos4-is/
>  obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
> diff --git a/drivers/media/platform/video-mux.c b/drivers/media/platform/video-mux.c
> new file mode 100644
> index 0000000000000..e35ffa18126f3
> --- /dev/null
> +++ b/drivers/media/platform/video-mux.c
> @@ -0,0 +1,295 @@
> +/*
> + * video stream multiplexer controlled via mux control
> + *
> + * Copyright (C) 2013 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
> + * Copyright (C) 2016-2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/mux/consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +struct video_mux {
> +	struct v4l2_subdev subdev;
> +	struct media_pad *pads;
> +	struct v4l2_mbus_framefmt *format_mbus;
> +	struct mux_control *mux;
> +	struct mutex lock;
> +	int active;
> +};
> +
> +static inline struct video_mux *v4l2_subdev_to_video_mux(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct video_mux, subdev);
> +}
> +
> +static int video_mux_link_setup(struct media_entity *entity,
> +				const struct media_pad *local,
> +				const struct media_pad *remote, u32 flags)
> +{
> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	int ret = 0;
> +
> +	/*
> +	 * The mux state is determined by the enabled sink pad link.
> +	 * Enabling or disabling the source pad link has no effect.
> +	 */
> +	if (local->flags & MEDIA_PAD_FL_SOURCE)
> +		return 0;
> +
> +	dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]",
> +		remote->entity->name, remote->index, local->entity->name,
> +		local->index, flags & MEDIA_LNK_FL_ENABLED);
> +
> +	mutex_lock(&vmux->lock);
> +
> +	if (flags & MEDIA_LNK_FL_ENABLED) {
> +		if (vmux->active == local->index)
> +			goto out;
> +
> +		if (vmux->active >= 0) {
> +			ret = -EBUSY;
> +			goto out;
> +		}
> +
> +		dev_dbg(sd->dev, "setting %d active\n", local->index);
> +		ret = mux_control_try_select(vmux->mux, local->index);
> +		if (ret < 0)
> +			goto out;
> +		vmux->active = local->index;
> +	} else {
> +		if (vmux->active != local->index)
> +			goto out;
> +
> +		dev_dbg(sd->dev, "going inactive\n");
> +		mux_control_deselect(vmux->mux);
> +		vmux->active = -1;
> +	}
> +
> +out:
> +	mutex_unlock(&vmux->lock);
> +	return ret;
> +}
> +
> +static struct media_entity_operations video_mux_ops = {
> +	.link_setup = video_mux_link_setup,
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int video_mux_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	struct v4l2_subdev *upstream_sd;
> +	struct media_pad *pad;
> +
> +	if (vmux->active == -1) {
> +		dev_err(sd->dev, "Can not start streaming on inactive mux\n");
> +		return -EINVAL;
> +	}
> +
> +	pad = media_entity_remote_pad(&sd->entity.pads[vmux->active]);
> +	if (!pad) {
> +		dev_err(sd->dev, "Failed to find remote source pad\n");
> +		return -ENOLINK;
> +	}
> +
> +	if (!is_media_entity_v4l2_subdev(pad->entity)) {
> +		dev_err(sd->dev, "Upstream entity is not a v4l2 subdev\n");
> +		return -ENODEV;
> +	}
> +
> +	upstream_sd = media_entity_to_v4l2_subdev(pad->entity);
> +
> +	return v4l2_subdev_call(upstream_sd, video, s_stream, enable);
> +}
> +
> +static const struct v4l2_subdev_video_ops video_mux_subdev_video_ops = {
> +	.s_stream = video_mux_s_stream,
> +};
> +
> +static struct v4l2_mbus_framefmt *
> +__video_mux_get_pad_format(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_pad_config *cfg,
> +			   unsigned int pad, u32 which)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +
> +	switch (which) {
> +	case V4L2_SUBDEV_FORMAT_TRY:
> +		return v4l2_subdev_get_try_format(sd, cfg, pad);
> +	case V4L2_SUBDEV_FORMAT_ACTIVE:
> +		return &vmux->format_mbus[pad];
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int video_mux_get_format(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_pad_config *cfg,
> +			    struct v4l2_subdev_format *sdformat)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +
> +	mutex_lock(&vmux->lock);
> +
> +	sdformat->format = *__video_mux_get_pad_format(sd, cfg, sdformat->pad,
> +						   sdformat->which);
> +
> +	mutex_unlock(&vmux->lock);
> +
> +	return 0;
> +}
> +
> +static int video_mux_set_format(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_pad_config *cfg,
> +			    struct v4l2_subdev_format *sdformat)
> +{
> +	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
> +	struct v4l2_mbus_framefmt *mbusformat;
> +	struct media_pad *pad = &vmux->pads[sdformat->pad];
> +
> +	mbusformat = __video_mux_get_pad_format(sd, cfg, sdformat->pad,
> +					    sdformat->which);
> +	if (!mbusformat)
> +		return -EINVAL;
> +
> +	mutex_lock(&vmux->lock);
> +
> +	/* Source pad mirrors active sink pad, no limitations on sink pads */
> +	if ((pad->flags & MEDIA_PAD_FL_SOURCE) && vmux->active >= 0)
> +		sdformat->format = vmux->format_mbus[vmux->active];
> +
> +	*mbusformat = sdformat->format;
> +
> +	mutex_unlock(&vmux->lock);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops video_mux_pad_ops = {
> +	.get_fmt = video_mux_get_format,
> +	.set_fmt = video_mux_set_format,
> +};
> +
> +static const struct v4l2_subdev_ops video_mux_subdev_ops = {
> +	.pad = &video_mux_pad_ops,
> +	.video = &video_mux_subdev_video_ops,
> +};
> +
> +static int video_mux_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *ep;
> +	struct video_mux *vmux;
> +	unsigned int num_pads = 0;
> +	int ret;
> +	int i;
> +
> +	vmux = devm_kzalloc(dev, sizeof(*vmux), GFP_KERNEL);
> +	if (!vmux)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, vmux);
> +
> +	v4l2_subdev_init(&vmux->subdev, &video_mux_subdev_ops);
> +	snprintf(vmux->subdev.name, sizeof(vmux->subdev.name), "%s", np->name);
> +	vmux->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	vmux->subdev.dev = dev;
> +
> +	/*
> +	 * The largest numbered port is the output port. It determines
> +	 * total number of pads.
> +	 */
> +	for_each_endpoint_of_node(np, ep) {
> +		struct of_endpoint endpoint;
> +
> +		of_graph_parse_endpoint(ep, &endpoint);
> +		num_pads = max(num_pads, endpoint.port + 1);
> +	}
> +
> +	if (num_pads < 2) {
> +		dev_err(dev, "Not enough ports %d\n", num_pads);
> +		return -EINVAL;
> +	}
> +
> +	vmux->mux = devm_mux_control_get(dev, NULL);
> +	if (IS_ERR(vmux->mux)) {
> +		ret = PTR_ERR(vmux->mux);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get mux: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mutex_init(&vmux->lock);
> +	vmux->active = -1;
> +	vmux->pads = devm_kcalloc(dev, num_pads, sizeof(*vmux->pads),
> +				  GFP_KERNEL);
> +	vmux->format_mbus = devm_kcalloc(dev, num_pads,
> +					 sizeof(*vmux->format_mbus),
> +					 GFP_KERNEL);
> +
> +	for (i = 0; i < num_pads - 1; i++)
> +		vmux->pads[i].flags = MEDIA_PAD_FL_SINK;
> +	vmux->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE;
> +
> +	vmux->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
> +	ret = media_entity_pads_init(&vmux->subdev.entity, num_pads,
> +				     vmux->pads);
> +	if (ret < 0)
> +		return ret;
> +
> +	vmux->subdev.entity.ops = &video_mux_ops;
> +
> +	return v4l2_async_register_subdev(&vmux->subdev);
> +}
> +
> +static int video_mux_remove(struct platform_device *pdev)
> +{
> +	struct video_mux *vmux = platform_get_drvdata(pdev);
> +	struct v4l2_subdev *sd = &vmux->subdev;
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id video_mux_dt_ids[] = {
> +	{ .compatible = "video-mux", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, video_mux_dt_ids);
> +
> +static struct platform_driver video_mux_driver = {
> +	.probe		= video_mux_probe,
> +	.remove		= video_mux_remove,
> +	.driver		= {
> +		.of_match_table = video_mux_dt_ids,
> +		.name = "video-mux",
> +	},
> +};
> +
> +module_platform_driver(video_mux_driver);
> +
> +MODULE_DESCRIPTION("video stream multiplexer");
> +MODULE_AUTHOR("Sascha Hauer, Pengutronix");
> +MODULE_AUTHOR("Philipp Zabel, Pengutronix");
> +MODULE_LICENSE("GPL");
> -- 
> 2.11.0
>
diff mbox

Patch

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index ac026ee1ca074..259c0ff780937 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -74,6 +74,12 @@  config VIDEO_M32R_AR_M64278
 	  To compile this driver as a module, choose M here: the
 	  module will be called arv.
 
+config VIDEO_MUX
+	tristate "Video Multiplexer"
+	depends on OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER && MULTIPLEXER
+	help
+	  This driver provides support for N:1 video bus multiplexers.
+
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 63303d63c64cf..a6363023f981e 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -28,6 +28,8 @@  obj-$(CONFIG_VIDEO_SH_VEU)		+= sh_veu.o
 
 obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
+obj-$(CONFIG_VIDEO_MUX)			+= video-mux.o
+
 obj-$(CONFIG_VIDEO_S3C_CAMIF) 		+= s3c-camif/
 obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) 	+= exynos4-is/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
diff --git a/drivers/media/platform/video-mux.c b/drivers/media/platform/video-mux.c
new file mode 100644
index 0000000000000..e35ffa18126f3
--- /dev/null
+++ b/drivers/media/platform/video-mux.c
@@ -0,0 +1,295 @@ 
+/*
+ * video stream multiplexer controlled via mux control
+ *
+ * Copyright (C) 2013 Pengutronix, Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2016-2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+struct video_mux {
+	struct v4l2_subdev subdev;
+	struct media_pad *pads;
+	struct v4l2_mbus_framefmt *format_mbus;
+	struct mux_control *mux;
+	struct mutex lock;
+	int active;
+};
+
+static inline struct video_mux *v4l2_subdev_to_video_mux(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct video_mux, subdev);
+}
+
+static int video_mux_link_setup(struct media_entity *entity,
+				const struct media_pad *local,
+				const struct media_pad *remote, u32 flags)
+{
+	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
+	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
+	int ret = 0;
+
+	/*
+	 * The mux state is determined by the enabled sink pad link.
+	 * Enabling or disabling the source pad link has no effect.
+	 */
+	if (local->flags & MEDIA_PAD_FL_SOURCE)
+		return 0;
+
+	dev_dbg(sd->dev, "link setup '%s':%d->'%s':%d[%d]",
+		remote->entity->name, remote->index, local->entity->name,
+		local->index, flags & MEDIA_LNK_FL_ENABLED);
+
+	mutex_lock(&vmux->lock);
+
+	if (flags & MEDIA_LNK_FL_ENABLED) {
+		if (vmux->active == local->index)
+			goto out;
+
+		if (vmux->active >= 0) {
+			ret = -EBUSY;
+			goto out;
+		}
+
+		dev_dbg(sd->dev, "setting %d active\n", local->index);
+		ret = mux_control_try_select(vmux->mux, local->index);
+		if (ret < 0)
+			goto out;
+		vmux->active = local->index;
+	} else {
+		if (vmux->active != local->index)
+			goto out;
+
+		dev_dbg(sd->dev, "going inactive\n");
+		mux_control_deselect(vmux->mux);
+		vmux->active = -1;
+	}
+
+out:
+	mutex_unlock(&vmux->lock);
+	return ret;
+}
+
+static struct media_entity_operations video_mux_ops = {
+	.link_setup = video_mux_link_setup,
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int video_mux_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
+	struct v4l2_subdev *upstream_sd;
+	struct media_pad *pad;
+
+	if (vmux->active == -1) {
+		dev_err(sd->dev, "Can not start streaming on inactive mux\n");
+		return -EINVAL;
+	}
+
+	pad = media_entity_remote_pad(&sd->entity.pads[vmux->active]);
+	if (!pad) {
+		dev_err(sd->dev, "Failed to find remote source pad\n");
+		return -ENOLINK;
+	}
+
+	if (!is_media_entity_v4l2_subdev(pad->entity)) {
+		dev_err(sd->dev, "Upstream entity is not a v4l2 subdev\n");
+		return -ENODEV;
+	}
+
+	upstream_sd = media_entity_to_v4l2_subdev(pad->entity);
+
+	return v4l2_subdev_call(upstream_sd, video, s_stream, enable);
+}
+
+static const struct v4l2_subdev_video_ops video_mux_subdev_video_ops = {
+	.s_stream = video_mux_s_stream,
+};
+
+static struct v4l2_mbus_framefmt *
+__video_mux_get_pad_format(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_pad_config *cfg,
+			   unsigned int pad, u32 which)
+{
+	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
+
+	switch (which) {
+	case V4L2_SUBDEV_FORMAT_TRY:
+		return v4l2_subdev_get_try_format(sd, cfg, pad);
+	case V4L2_SUBDEV_FORMAT_ACTIVE:
+		return &vmux->format_mbus[pad];
+	default:
+		return NULL;
+	}
+}
+
+static int video_mux_get_format(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *sdformat)
+{
+	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
+
+	mutex_lock(&vmux->lock);
+
+	sdformat->format = *__video_mux_get_pad_format(sd, cfg, sdformat->pad,
+						   sdformat->which);
+
+	mutex_unlock(&vmux->lock);
+
+	return 0;
+}
+
+static int video_mux_set_format(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_pad_config *cfg,
+			    struct v4l2_subdev_format *sdformat)
+{
+	struct video_mux *vmux = v4l2_subdev_to_video_mux(sd);
+	struct v4l2_mbus_framefmt *mbusformat;
+	struct media_pad *pad = &vmux->pads[sdformat->pad];
+
+	mbusformat = __video_mux_get_pad_format(sd, cfg, sdformat->pad,
+					    sdformat->which);
+	if (!mbusformat)
+		return -EINVAL;
+
+	mutex_lock(&vmux->lock);
+
+	/* Source pad mirrors active sink pad, no limitations on sink pads */
+	if ((pad->flags & MEDIA_PAD_FL_SOURCE) && vmux->active >= 0)
+		sdformat->format = vmux->format_mbus[vmux->active];
+
+	*mbusformat = sdformat->format;
+
+	mutex_unlock(&vmux->lock);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_pad_ops video_mux_pad_ops = {
+	.get_fmt = video_mux_get_format,
+	.set_fmt = video_mux_set_format,
+};
+
+static const struct v4l2_subdev_ops video_mux_subdev_ops = {
+	.pad = &video_mux_pad_ops,
+	.video = &video_mux_subdev_video_ops,
+};
+
+static int video_mux_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *ep;
+	struct video_mux *vmux;
+	unsigned int num_pads = 0;
+	int ret;
+	int i;
+
+	vmux = devm_kzalloc(dev, sizeof(*vmux), GFP_KERNEL);
+	if (!vmux)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, vmux);
+
+	v4l2_subdev_init(&vmux->subdev, &video_mux_subdev_ops);
+	snprintf(vmux->subdev.name, sizeof(vmux->subdev.name), "%s", np->name);
+	vmux->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	vmux->subdev.dev = dev;
+
+	/*
+	 * The largest numbered port is the output port. It determines
+	 * total number of pads.
+	 */
+	for_each_endpoint_of_node(np, ep) {
+		struct of_endpoint endpoint;
+
+		of_graph_parse_endpoint(ep, &endpoint);
+		num_pads = max(num_pads, endpoint.port + 1);
+	}
+
+	if (num_pads < 2) {
+		dev_err(dev, "Not enough ports %d\n", num_pads);
+		return -EINVAL;
+	}
+
+	vmux->mux = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(vmux->mux)) {
+		ret = PTR_ERR(vmux->mux);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get mux: %d\n", ret);
+		return ret;
+	}
+
+	mutex_init(&vmux->lock);
+	vmux->active = -1;
+	vmux->pads = devm_kcalloc(dev, num_pads, sizeof(*vmux->pads),
+				  GFP_KERNEL);
+	vmux->format_mbus = devm_kcalloc(dev, num_pads,
+					 sizeof(*vmux->format_mbus),
+					 GFP_KERNEL);
+
+	for (i = 0; i < num_pads - 1; i++)
+		vmux->pads[i].flags = MEDIA_PAD_FL_SINK;
+	vmux->pads[num_pads - 1].flags = MEDIA_PAD_FL_SOURCE;
+
+	vmux->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
+	ret = media_entity_pads_init(&vmux->subdev.entity, num_pads,
+				     vmux->pads);
+	if (ret < 0)
+		return ret;
+
+	vmux->subdev.entity.ops = &video_mux_ops;
+
+	return v4l2_async_register_subdev(&vmux->subdev);
+}
+
+static int video_mux_remove(struct platform_device *pdev)
+{
+	struct video_mux *vmux = platform_get_drvdata(pdev);
+	struct v4l2_subdev *sd = &vmux->subdev;
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+
+	return 0;
+}
+
+static const struct of_device_id video_mux_dt_ids[] = {
+	{ .compatible = "video-mux", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, video_mux_dt_ids);
+
+static struct platform_driver video_mux_driver = {
+	.probe		= video_mux_probe,
+	.remove		= video_mux_remove,
+	.driver		= {
+		.of_match_table = video_mux_dt_ids,
+		.name = "video-mux",
+	},
+};
+
+module_platform_driver(video_mux_driver);
+
+MODULE_DESCRIPTION("video stream multiplexer");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_AUTHOR("Philipp Zabel, Pengutronix");
+MODULE_LICENSE("GPL");