| Message ID | 20170523085241.GA18204@red-moon (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
Hi Lorenzo, On 5/23/2017 2:22 PM, Lorenzo Pieralisi wrote: > On Tue, May 23, 2017 at 02:26:10AM -0400, Nate Watterson wrote: >> Hi Sricharan, >> >> On 4/10/2017 7:21 AM, Sricharan R wrote: >>> This is an equivalent to the DT's handling of the iommu master's probe >>> with deferred probing when the corrsponding iommu is not probed yet. >>> The lack of a registered IOMMU can be caused by the lack of a driver for >>> the IOMMU, the IOMMU device probe not having been performed yet, having >>> been deferred, or having failed. >>> >>> The first case occurs when the firmware describes the bus master and >>> IOMMU topology correctly but no device driver exists for the IOMMU yet >>> or the device driver has not been compiled in. Return NULL, the caller >>> will configure the device without an IOMMU. >>> >>> The second and third cases are handled by deferring the probe of the bus >>> master device which will eventually get reprobed after the IOMMU. >>> >>> The last case is currently handled by deferring the probe of the bus >>> master device as well. A mechanism to either configure the bus master >>> device without an IOMMU or to fail the bus master device probe depending >>> on whether the IOMMU is optional or mandatory would be a good >>> enhancement. >>> >>> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> >>> Reviewed-by: Robin Murphy <robin.murphy@arm.com> >>> [Lorenzo: Added fixes for dma_coherent_mask overflow, acpi_dma_configure >>> called multiple times for same device] >>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >>> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >>> --- >>> drivers/acpi/arm64/iort.c | 33 ++++++++++++++++++++++++++++++++- >>> drivers/acpi/scan.c | 11 ++++++++--- >>> drivers/base/dma-mapping.c | 2 +- >>> include/acpi/acpi_bus.h | 2 +- >>> include/linux/acpi.h | 7 +++++-- >>> 5 files changed, 47 insertions(+), 8 deletions(-) >>> >>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >>> index 3dd9ec3..e323ece 100644 >>> --- a/drivers/acpi/arm64/iort.c >>> +++ b/drivers/acpi/arm64/iort.c >>> @@ -543,6 +543,14 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, >>> const struct iommu_ops *ops = NULL; >>> int ret = -ENODEV; >>> struct fwnode_handle *iort_fwnode; >>> + struct iommu_fwspec *fwspec = dev->iommu_fwspec; >>> + >>> + /* >>> + * If we already translated the fwspec there >>> + * is nothing left to do, return the iommu_ops. >>> + */ >>> + if (fwspec && fwspec->ops) >>> + return fwspec->ops; >> >> Is this logic strictly required? It breaks masters with multiple SIDs >> as only the first SID is actually added to the master's fwspec. > > My bad, that's indeed a silly bug I introduced. Please let me know if the > patch below fixes it, we will send it upstream shortly. > oops, i think emails crossed. Please let me know if you are ok to add this to the other fixes. Regards, Sricharan > Lorenzo > > -- >8 -- > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index c5fecf9..e326f2a 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -666,14 +666,6 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, > int ret = -ENODEV; > struct fwnode_handle *iort_fwnode; > > - /* > - * If we already translated the fwspec there > - * is nothing left to do, return the iommu_ops. > - */ > - ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); > - if (ops) > - return ops; > - > if (node) { > iort_fwnode = iort_get_fwnode(node); > if (!iort_fwnode) > @@ -735,6 +727,14 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) > u32 streamid = 0; > int err; > > + /* > + * If we already translated the fwspec there > + * is nothing left to do, return the iommu_ops. > + */ > + ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); > + if (ops) > + return ops; > + > if (dev_is_pci(dev)) { > struct pci_bus *bus = to_pci_dev(dev)->bus; > u32 rid; > >
On Tue, May 23, 2017 at 02:31:17PM +0530, Sricharan R wrote: > Hi Lorenzo, > > On 5/23/2017 2:22 PM, Lorenzo Pieralisi wrote: > > On Tue, May 23, 2017 at 02:26:10AM -0400, Nate Watterson wrote: > >> Hi Sricharan, > >> > >> On 4/10/2017 7:21 AM, Sricharan R wrote: > >>> This is an equivalent to the DT's handling of the iommu master's probe > >>> with deferred probing when the corrsponding iommu is not probed yet. > >>> The lack of a registered IOMMU can be caused by the lack of a driver for > >>> the IOMMU, the IOMMU device probe not having been performed yet, having > >>> been deferred, or having failed. > >>> > >>> The first case occurs when the firmware describes the bus master and > >>> IOMMU topology correctly but no device driver exists for the IOMMU yet > >>> or the device driver has not been compiled in. Return NULL, the caller > >>> will configure the device without an IOMMU. > >>> > >>> The second and third cases are handled by deferring the probe of the bus > >>> master device which will eventually get reprobed after the IOMMU. > >>> > >>> The last case is currently handled by deferring the probe of the bus > >>> master device as well. A mechanism to either configure the bus master > >>> device without an IOMMU or to fail the bus master device probe depending > >>> on whether the IOMMU is optional or mandatory would be a good > >>> enhancement. > >>> > >>> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> > >>> Reviewed-by: Robin Murphy <robin.murphy@arm.com> > >>> [Lorenzo: Added fixes for dma_coherent_mask overflow, acpi_dma_configure > >>> called multiple times for same device] > >>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > >>> Signed-off-by: Sricharan R <sricharan@codeaurora.org> > >>> --- > >>> drivers/acpi/arm64/iort.c | 33 ++++++++++++++++++++++++++++++++- > >>> drivers/acpi/scan.c | 11 ++++++++--- > >>> drivers/base/dma-mapping.c | 2 +- > >>> include/acpi/acpi_bus.h | 2 +- > >>> include/linux/acpi.h | 7 +++++-- > >>> 5 files changed, 47 insertions(+), 8 deletions(-) > >>> > >>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > >>> index 3dd9ec3..e323ece 100644 > >>> --- a/drivers/acpi/arm64/iort.c > >>> +++ b/drivers/acpi/arm64/iort.c > >>> @@ -543,6 +543,14 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, > >>> const struct iommu_ops *ops = NULL; > >>> int ret = -ENODEV; > >>> struct fwnode_handle *iort_fwnode; > >>> + struct iommu_fwspec *fwspec = dev->iommu_fwspec; > >>> + > >>> + /* > >>> + * If we already translated the fwspec there > >>> + * is nothing left to do, return the iommu_ops. > >>> + */ > >>> + if (fwspec && fwspec->ops) > >>> + return fwspec->ops; > >> > >> Is this logic strictly required? It breaks masters with multiple SIDs > >> as only the first SID is actually added to the master's fwspec. > > > > My bad, that's indeed a silly bug I introduced. Please let me know if the > > patch below fixes it, we will send it upstream shortly. > > > > oops, i think emails crossed. Please let me know if you are ok to add > this to the other fixes. No worries, yes I am ok thanks but please give Nate some time to report back to make sure the diff I sent actually fixes the problem. Apologies for the breakage. Lorenzo > > Regards, > Sricharan > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Lorenzo, On 5/23/2017 5:26 AM, Lorenzo Pieralisi wrote: > On Tue, May 23, 2017 at 02:31:17PM +0530, Sricharan R wrote: >> Hi Lorenzo, >> >> On 5/23/2017 2:22 PM, Lorenzo Pieralisi wrote: >>> On Tue, May 23, 2017 at 02:26:10AM -0400, Nate Watterson wrote: >>>> Hi Sricharan, >>>> >>>> On 4/10/2017 7:21 AM, Sricharan R wrote: >>>>> This is an equivalent to the DT's handling of the iommu master's probe >>>>> with deferred probing when the corrsponding iommu is not probed yet. >>>>> The lack of a registered IOMMU can be caused by the lack of a driver for >>>>> the IOMMU, the IOMMU device probe not having been performed yet, having >>>>> been deferred, or having failed. >>>>> >>>>> The first case occurs when the firmware describes the bus master and >>>>> IOMMU topology correctly but no device driver exists for the IOMMU yet >>>>> or the device driver has not been compiled in. Return NULL, the caller >>>>> will configure the device without an IOMMU. >>>>> >>>>> The second and third cases are handled by deferring the probe of the bus >>>>> master device which will eventually get reprobed after the IOMMU. >>>>> >>>>> The last case is currently handled by deferring the probe of the bus >>>>> master device as well. A mechanism to either configure the bus master >>>>> device without an IOMMU or to fail the bus master device probe depending >>>>> on whether the IOMMU is optional or mandatory would be a good >>>>> enhancement. >>>>> >>>>> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> >>>>> Reviewed-by: Robin Murphy <robin.murphy@arm.com> >>>>> [Lorenzo: Added fixes for dma_coherent_mask overflow, acpi_dma_configure >>>>> called multiple times for same device] >>>>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >>>>> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >>>>> --- >>>>> drivers/acpi/arm64/iort.c | 33 ++++++++++++++++++++++++++++++++- >>>>> drivers/acpi/scan.c | 11 ++++++++--- >>>>> drivers/base/dma-mapping.c | 2 +- >>>>> include/acpi/acpi_bus.h | 2 +- >>>>> include/linux/acpi.h | 7 +++++-- >>>>> 5 files changed, 47 insertions(+), 8 deletions(-) >>>>> >>>>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c >>>>> index 3dd9ec3..e323ece 100644 >>>>> --- a/drivers/acpi/arm64/iort.c >>>>> +++ b/drivers/acpi/arm64/iort.c >>>>> @@ -543,6 +543,14 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, >>>>> const struct iommu_ops *ops = NULL; >>>>> int ret = -ENODEV; >>>>> struct fwnode_handle *iort_fwnode; >>>>> + struct iommu_fwspec *fwspec = dev->iommu_fwspec; >>>>> + >>>>> + /* >>>>> + * If we already translated the fwspec there >>>>> + * is nothing left to do, return the iommu_ops. >>>>> + */ >>>>> + if (fwspec && fwspec->ops) >>>>> + return fwspec->ops; >>>> >>>> Is this logic strictly required? It breaks masters with multiple SIDs >>>> as only the first SID is actually added to the master's fwspec. >>> >>> My bad, that's indeed a silly bug I introduced. Please let me know if the >>> patch below fixes it, we will send it upstream shortly. >>> >> >> oops, i think emails crossed. Please let me know if you are ok to add >> this to the other fixes. > > No worries, yes I am ok thanks but please give Nate some time to report > back to make sure the diff I sent actually fixes the problem. The patch you sent fixes the problem. Thanks for the quick turnaround. > > Apologies for the breakage. > > Lorenzo > >> >> Regards, >> Sricharan >>
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index c5fecf9..e326f2a 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -666,14 +666,6 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev, int ret = -ENODEV; struct fwnode_handle *iort_fwnode; - /* - * If we already translated the fwspec there - * is nothing left to do, return the iommu_ops. - */ - ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); - if (ops) - return ops; - if (node) { iort_fwnode = iort_get_fwnode(node); if (!iort_fwnode) @@ -735,6 +727,14 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev) u32 streamid = 0; int err; + /* + * If we already translated the fwspec there + * is nothing left to do, return the iommu_ops. + */ + ops = iort_fwspec_iommu_ops(dev->iommu_fwspec); + if (ops) + return ops; + if (dev_is_pci(dev)) { struct pci_bus *bus = to_pci_dev(dev)->bus; u32 rid;