diff mbox

[v2] mmc: bcm2835: fix potential null pointer dereferences

Message ID 20170525170455.GA6904@embeddedgus (mailing list archive)
State Accepted
Headers show

Commit Message

Gustavo A. R. Silva May 25, 2017, 5:04 p.m. UTC
Null check at line 1165: if (mrq->cmd), implies that mrq->cmd might
be NULL.
Add null checks before dereferencing pointer mrq->cmd in order to avoid
any potential NULL pointer dereference.

Addresses-Coverity-ID: 1408740
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
---
Changes in v2:
 Change subject to make it clear the patch is bcm2835 related.

 drivers/mmc/host/bcm2835.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

Comments

Ulf Hansson May 29, 2017, 2:42 p.m. UTC | #1
On 25 May 2017 at 19:04, Gustavo A. R. Silva <garsilva@embeddedor.com> wrote:
> Null check at line 1165: if (mrq->cmd), implies that mrq->cmd might
> be NULL.
> Add null checks before dereferencing pointer mrq->cmd in order to avoid
> any potential NULL pointer dereference.
>
> Addresses-Coverity-ID: 1408740
> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>

Thanks, applied for next!

Kind regards
Uffe

> ---
> Changes in v2:
>  Change subject to make it clear the patch is bcm2835 related.
>
>  drivers/mmc/host/bcm2835.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
> index 1f343a4..abba9a2 100644
> --- a/drivers/mmc/host/bcm2835.c
> +++ b/drivers/mmc/host/bcm2835.c
> @@ -1172,7 +1172,10 @@ static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
>         if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
>                 dev_err(dev, "unsupported block size (%d bytes)\n",
>                         mrq->data->blksz);
> -               mrq->cmd->error = -EINVAL;
> +
> +               if (mrq->cmd)
> +                       mrq->cmd->error = -EINVAL;
> +
>                 mmc_request_done(mmc, mrq);
>                 return;
>         }
> @@ -1194,7 +1197,10 @@ static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
>                         readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK,
>                         edm);
>                 bcm2835_dumpregs(host);
> -               mrq->cmd->error = -EILSEQ;
> +
> +               if (mrq->cmd)
> +                       mrq->cmd->error = -EILSEQ;
> +
>                 bcm2835_finish_request(host);
>                 mutex_unlock(&host->mutex);
>                 return;
> @@ -1207,7 +1213,7 @@ static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
>                         if (!host->use_busy)
>                                 bcm2835_finish_command(host);
>                 }
> -       } else if (bcm2835_send_command(host, mrq->cmd)) {
> +       } else if (mrq->cmd && bcm2835_send_command(host, mrq->cmd)) {
>                 if (host->data && host->dma_desc) {
>                         /* DMA transfer starts now, PIO starts after irq */
>                         bcm2835_start_dma(host);
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 1f343a4..abba9a2 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1172,7 +1172,10 @@  static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
 		dev_err(dev, "unsupported block size (%d bytes)\n",
 			mrq->data->blksz);
-		mrq->cmd->error = -EINVAL;
+
+		if (mrq->cmd)
+			mrq->cmd->error = -EINVAL;
+
 		mmc_request_done(mmc, mrq);
 		return;
 	}
@@ -1194,7 +1197,10 @@  static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
 			readl(host->ioaddr + SDCMD) & SDCMD_CMD_MASK,
 			edm);
 		bcm2835_dumpregs(host);
-		mrq->cmd->error = -EILSEQ;
+
+		if (mrq->cmd)
+			mrq->cmd->error = -EILSEQ;
+
 		bcm2835_finish_request(host);
 		mutex_unlock(&host->mutex);
 		return;
@@ -1207,7 +1213,7 @@  static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq)
 			if (!host->use_busy)
 				bcm2835_finish_command(host);
 		}
-	} else if (bcm2835_send_command(host, mrq->cmd)) {
+	} else if (mrq->cmd && bcm2835_send_command(host, mrq->cmd)) {
 		if (host->data && host->dma_desc) {
 			/* DMA transfer starts now, PIO starts after irq */
 			bcm2835_start_dma(host);