| Message ID | 1487839757-14040-1-git-send-email-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 23/02/2017 at 10:49:17 +0200, Claudiu Beznea wrote: > Add pwm controller bindings for sam5d2_xplained > and enable it. > > Changes since v1: > - Correct the typo in patch subject. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++ > arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++ > 2 files changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi > index 9fc270f..493ea29 100644 > --- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi > +++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi > @@ -318,6 +318,10 @@ > }; > }; > > + pwm0: pwm@f802c000 { > + status = "okay"; > + }; > + > flx0: flexcom@f8034000 { > atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; > status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ This doesn't apply on v4.12-rc1, this file doesn't exist. > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > index cd459e8..e88785e 100644 > --- a/arch/arm/boot/dts/sama5d2.dtsi > +++ b/arch/arm/boot/dts/sama5d2.dtsi > @@ -1098,6 +1098,14 @@ > status = "disabled"; > }; > > + pwm0: pwm@f802c000 { > + compatible = "atmel,sama5d2-pwm"; > + reg = <0xf802c000 0x4000>; > + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; > + #pwm-cells = <3>; > + clocks = <&pwm_clk>; > + }; > + > sfr: sfr@f8030000 { > compatible = "atmel,sama5d2-sfr", "syscon"; > reg = <0xf8030000 0x98>; > -- > 2.7.4 >
On 31.05.2017 11:50, Alexandre Belloni wrote: > Hi, > > On 23/02/2017 at 10:49:17 +0200, Claudiu Beznea wrote: >> Add pwm controller bindings for sam5d2_xplained >> and enable it. >> >> Changes since v1: >> - Correct the typo in patch subject. >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> >> --- >> arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++ >> arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++ >> 2 files changed, 12 insertions(+) >> >> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi >> index 9fc270f..493ea29 100644 >> --- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi >> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi >> @@ -318,6 +318,10 @@ >> }; >> }; >> >> + pwm0: pwm@f802c000 { >> + status = "okay"; >> + }; >> + >> flx0: flexcom@f8034000 { >> atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; >> status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ > > > This doesn't apply on v4.12-rc1, this file doesn't exist. Sorry, I will resend it. > >> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi >> index cd459e8..e88785e 100644 >> --- a/arch/arm/boot/dts/sama5d2.dtsi >> +++ b/arch/arm/boot/dts/sama5d2.dtsi >> @@ -1098,6 +1098,14 @@ >> status = "disabled"; >> }; >> >> + pwm0: pwm@f802c000 { >> + compatible = "atmel,sama5d2-pwm"; >> + reg = <0xf802c000 0x4000>; >> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; >> + #pwm-cells = <3>; >> + clocks = <&pwm_clk>; >> + }; >> + >> sfr: sfr@f8030000 { >> compatible = "atmel,sama5d2-sfr", "syscon"; >> reg = <0xf8030000 0x98>; >> -- >> 2.7.4 >> >
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi index 9fc270f..493ea29 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi +++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi @@ -318,6 +318,10 @@ }; }; + pwm0: pwm@f802c000 { + status = "okay"; + }; + flx0: flexcom@f8034000 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index cd459e8..e88785e 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@ status = "disabled"; }; + pwm0: pwm@f802c000 { + compatible = "atmel,sama5d2-pwm"; + reg = <0xf802c000 0x4000>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + }; + sfr: sfr@f8030000 { compatible = "atmel,sama5d2-sfr", "syscon"; reg = <0xf8030000 0x98>;
Add pwm controller bindings for sam5d2_xplained and enable it. Changes since v1: - Correct the typo in patch subject. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++ arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+)