Message ID | 20170607083810.30922-6-antoine.tenart@free-electrons.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 06/07/2017 01:38 AM, Antoine Tenart wrote: > Introduce an ops structure to add an indirection on functions accessing > the registers. This is needed to add the xMDIO support later. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > --- > drivers/net/ethernet/marvell/mvmdio.c | 65 +++++++++++++++++++++++++++-------- > 1 file changed, 51 insertions(+), 14 deletions(-) > > diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c > index 56bbe3990590..8a71ef93a61b 100644 > --- a/drivers/net/ethernet/marvell/mvmdio.c > +++ b/drivers/net/ethernet/marvell/mvmdio.c > @@ -62,6 +62,15 @@ struct orion_mdio_dev { > */ > int err_interrupt; > wait_queue_head_t smi_busy_wait; > + struct orion_mdio_ops *ops; > +}; > + > +struct orion_mdio_ops { > + int (*is_done)(struct orion_mdio_dev *); > + int (*is_read_valid)(struct orion_mdio_dev *); > + void (*start_read)(struct orion_mdio_dev *, int, int); > + u16 (*read)(struct orion_mdio_dev *); > + void (*write)(struct orion_mdio_dev *, int, int, u16); > }; > > static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) > @@ -74,6 +83,30 @@ static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev) > return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID); > } > > +static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id, > + int regnum) > +{ > + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | > + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | > + MVMDIO_SMI_READ_OPERATION), > + dev->regs); > +} > + > +static u16 orion_mdio_read_op(struct orion_mdio_dev *dev) > +{ > + return readl(dev->regs) & GENMASK(15,0); > +} > + > +static void orion_mdio_write_op(struct orion_mdio_dev *dev, int mii_id, > + int regnum, u16 value) > +{ > + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | > + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | > + MVMDIO_SMI_WRITE_OPERATION | > + (value << MVMDIO_SMI_DATA_SHIFT)), > + dev->regs); > +} > + > /* Wait for the SMI unit to be ready for another operation > */ > static int orion_mdio_wait_ready(struct mii_bus *bus) > @@ -84,7 +117,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus) > int timedout = 0; > > while (1) { > - if (orion_mdio_smi_is_done(dev)) > + if (dev->ops->is_done(dev)) Nit: you could actually keep this function (and all of them that have a corresponding dev->ops function pointer) and just make it a static inline that calls into dev->ops->is_done() That would limit the delta to review, and it would still be within the namespace of the driver (orion_mdio_*). Your call. > return 0; > else if (timedout) > break; > @@ -103,8 +136,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus) > if (timeout < 2) > timeout = 2; > wait_event_timeout(dev->smi_busy_wait, > - orion_mdio_smi_is_done(dev), > - timeout); > + dev->ops->is_done(dev), timeout); > > ++timedout; > } > @@ -126,22 +158,19 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id, > if (ret < 0) > goto out; > > - writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | > - (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | > - MVMDIO_SMI_READ_OPERATION), > - dev->regs); > + dev->ops->start_read(dev, mii_id, regnum); > > ret = orion_mdio_wait_ready(bus); > if (ret < 0) > goto out; > > - if (orion_mdio_smi_is_read_valid(dev)) { > + if (dev->ops->is_read_valid(dev)) { > dev_err(bus->parent, "SMI bus read not valid\n"); > ret = -ENODEV; > goto out; > } > > - ret = readl(dev->regs) & GENMASK(15,0); > + ret = dev->ops->read(dev); > out: > mutex_unlock(&dev->lock); > return ret; > @@ -159,11 +188,7 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id, > if (ret < 0) > goto out; > > - writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | > - (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | > - MVMDIO_SMI_WRITE_OPERATION | > - (value << MVMDIO_SMI_DATA_SHIFT)), > - dev->regs); > + dev->ops->write(dev, mii_id, regnum, value); > > out: > mutex_unlock(&dev->lock); > @@ -190,6 +215,7 @@ static int orion_mdio_probe(struct platform_device *pdev) > struct resource *r; > struct mii_bus *bus; > struct orion_mdio_dev *dev; > + struct orion_mdio_ops *ops; > int i, ret; > > r = platform_get_resource(pdev, IORESOURCE_MEM, 0); > @@ -249,6 +275,17 @@ static int orion_mdio_probe(struct platform_device *pdev) > > mutex_init(&dev->lock); > > + ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL); > + if (!ops) > + return -ENOMEM; > + > + ops->is_done = orion_mdio_smi_is_done; > + ops->is_read_valid = orion_mdio_smi_is_read_valid; > + ops->start_read = orion_mdio_start_read_op; > + ops->read = orion_mdio_read_op; > + ops->write = orion_mdio_write_op; > + dev->ops = ops; > + > if (pdev->dev.of_node) > ret = of_mdiobus_register(bus, pdev->dev.of_node); > else >
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index 56bbe3990590..8a71ef93a61b 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -62,6 +62,15 @@ struct orion_mdio_dev { */ int err_interrupt; wait_queue_head_t smi_busy_wait; + struct orion_mdio_ops *ops; +}; + +struct orion_mdio_ops { + int (*is_done)(struct orion_mdio_dev *); + int (*is_read_valid)(struct orion_mdio_dev *); + void (*start_read)(struct orion_mdio_dev *, int, int); + u16 (*read)(struct orion_mdio_dev *); + void (*write)(struct orion_mdio_dev *, int, int, u16); }; static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) @@ -74,6 +83,30 @@ static int orion_mdio_smi_is_read_valid(struct orion_mdio_dev *dev) return !(readl(dev->regs) & MVMDIO_SMI_READ_VALID); } +static void orion_mdio_start_read_op(struct orion_mdio_dev *dev, int mii_id, + int regnum) +{ + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | + MVMDIO_SMI_READ_OPERATION), + dev->regs); +} + +static u16 orion_mdio_read_op(struct orion_mdio_dev *dev) +{ + return readl(dev->regs) & GENMASK(15,0); +} + +static void orion_mdio_write_op(struct orion_mdio_dev *dev, int mii_id, + int regnum, u16 value) +{ + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | + MVMDIO_SMI_WRITE_OPERATION | + (value << MVMDIO_SMI_DATA_SHIFT)), + dev->regs); +} + /* Wait for the SMI unit to be ready for another operation */ static int orion_mdio_wait_ready(struct mii_bus *bus) @@ -84,7 +117,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus) int timedout = 0; while (1) { - if (orion_mdio_smi_is_done(dev)) + if (dev->ops->is_done(dev)) return 0; else if (timedout) break; @@ -103,8 +136,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus) if (timeout < 2) timeout = 2; wait_event_timeout(dev->smi_busy_wait, - orion_mdio_smi_is_done(dev), - timeout); + dev->ops->is_done(dev), timeout); ++timedout; } @@ -126,22 +158,19 @@ static int orion_mdio_read(struct mii_bus *bus, int mii_id, if (ret < 0) goto out; - writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | - (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | - MVMDIO_SMI_READ_OPERATION), - dev->regs); + dev->ops->start_read(dev, mii_id, regnum); ret = orion_mdio_wait_ready(bus); if (ret < 0) goto out; - if (orion_mdio_smi_is_read_valid(dev)) { + if (dev->ops->is_read_valid(dev)) { dev_err(bus->parent, "SMI bus read not valid\n"); ret = -ENODEV; goto out; } - ret = readl(dev->regs) & GENMASK(15,0); + ret = dev->ops->read(dev); out: mutex_unlock(&dev->lock); return ret; @@ -159,11 +188,7 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id, if (ret < 0) goto out; - writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | - (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | - MVMDIO_SMI_WRITE_OPERATION | - (value << MVMDIO_SMI_DATA_SHIFT)), - dev->regs); + dev->ops->write(dev, mii_id, regnum, value); out: mutex_unlock(&dev->lock); @@ -190,6 +215,7 @@ static int orion_mdio_probe(struct platform_device *pdev) struct resource *r; struct mii_bus *bus; struct orion_mdio_dev *dev; + struct orion_mdio_ops *ops; int i, ret; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -249,6 +275,17 @@ static int orion_mdio_probe(struct platform_device *pdev) mutex_init(&dev->lock); + ops = devm_kzalloc(&pdev->dev, sizeof(*ops), GFP_KERNEL); + if (!ops) + return -ENOMEM; + + ops->is_done = orion_mdio_smi_is_done; + ops->is_read_valid = orion_mdio_smi_is_read_valid; + ops->start_read = orion_mdio_start_read_op; + ops->read = orion_mdio_read_op; + ops->write = orion_mdio_write_op; + dev->ops = ops; + if (pdev->dev.of_node) ret = of_mdiobus_register(bus, pdev->dev.of_node); else
Introduce an ops structure to add an indirection on functions accessing the registers. This is needed to add the xMDIO support later. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- drivers/net/ethernet/marvell/mvmdio.c | 65 +++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 14 deletions(-)