diff mbox

[v3,4/6] clk: samsung: exynos-audss: Convert to the new clk_hw API

Message ID 1494831047-10235-1-git-send-email-m.szyprowski@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Marek Szyprowski May 15, 2017, 6:50 a.m. UTC
Clock providers should use the new struct clk_hw based API, so convert
Exynos Audio Subsystem clock provider to the new approach.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Sylwester, if possible, please replace v2 with this fixed version in your tree,
as it has not been merged yet to clk-next nor to linux-next.

Changelog
v3:
- fixed clock data parameter passed to of_clk_add_hw_provider() - after conversion
  clk_data is a pointer, so passing it as &clk_data is wrong and causes serious issues

---
 drivers/clk/samsung/clk-exynos-audss.c | 57 +++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 28 deletions(-)

Comments

Chanwoo Choi June 9, 2017, 1:33 a.m. UTC | #1
Dear Marek,

I tested this patch[1] which was applied on Sylwester's git repo. 
[1] https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.13/clk/next&id=6622c52f47372186c17548ca7398c229c45e6215

When I tested it on XU3, I can't get the kernel booting.

[Following log]
U-Boot 2016.03-gc2deb3a51-TIZEN.org (Oct 28 2016 - 18:00:23 +0000) for ODROID-XU3

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type:  xu3
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
reading exynos5422-odroidxu3.dtb
56532 bytes read in 16 ms (3.4 MiB/s)
reading uInitrd
** Unable to read file uInitrd **
reading zImage
7676176 bytes read in 208 ms (35.2 MiB/s)
Kernel image @ 0x40007fc0 [ 0x000000 - 0x752110 ]
## Flattened Device Tree blob at 40800000
   Booting using the fdt blob at 0x40800000
   Loading Device Tree to 4ffef000, end 4ffffcd3 ... OK

Starting kernel ...




On 2017년 05월 15일 15:50, Marek Szyprowski wrote:
> Clock providers should use the new struct clk_hw based API, so convert
> Exynos Audio Subsystem clock provider to the new approach.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> Sylwester, if possible, please replace v2 with this fixed version in your tree,
> as it has not been merged yet to clk-next nor to linux-next.
> 
> Changelog
> v3:
> - fixed clock data parameter passed to of_clk_add_hw_provider() - after conversion
>   clk_data is a pointer, so passing it as &clk_data is wrong and causes serious issues
> 
> ---
>  drivers/clk/samsung/clk-exynos-audss.c | 57 +++++++++++++++++-----------------
>  1 file changed, 29 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
> index cb7df358a27d..85edeb738853 100644
> --- a/drivers/clk/samsung/clk-exynos-audss.c
> +++ b/drivers/clk/samsung/clk-exynos-audss.c
> @@ -22,9 +22,8 @@
>  #include <dt-bindings/clock/exynos-audss-clk.h>
>  
>  static DEFINE_SPINLOCK(lock);
> -static struct clk **clk_table;
>  static void __iomem *reg_base;
> -static struct clk_onecell_data clk_data;
> +static struct clk_hw_onecell_data *clk_data;
>  /*
>   * On Exynos5420 this will be a clock which has to be enabled before any
>   * access to audss registers. Typically a child of EPLL.
> @@ -110,18 +109,18 @@ static void exynos_audss_clk_teardown(void)
>  	int i;
>  
>  	for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) {
> -		if (!IS_ERR(clk_table[i]))
> -			clk_unregister_mux(clk_table[i]);
> +		if (!IS_ERR(clk_data->hws[i]))
> +			clk_hw_unregister_mux(clk_data->hws[i]);
>  	}
>  
>  	for (; i < EXYNOS_SRP_CLK; i++) {
> -		if (!IS_ERR(clk_table[i]))
> -			clk_unregister_divider(clk_table[i]);
> +		if (!IS_ERR(clk_data->hws[i]))
> +			clk_hw_unregister_divider(clk_data->hws[i]);
>  	}
>  
> -	for (; i < clk_data.clk_num; i++) {
> -		if (!IS_ERR(clk_table[i]))
> -			clk_unregister_gate(clk_table[i]);
> +	for (; i < clk_data->num; i++) {
> +		if (!IS_ERR(clk_data->hws[i]))
> +			clk_hw_unregister_gate(clk_data->hws[i]);
>  	}
>  }
>  
> @@ -133,6 +132,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
>  	const char *sclk_pcm_p = "sclk_pcm0";
>  	struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
>  	const struct exynos_audss_clk_drvdata *variant;
> +	struct clk_hw **clk_table;
>  	struct resource *res;
>  	int i, ret = 0;
>  
> @@ -149,14 +149,15 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
>  
>  	epll = ERR_PTR(-ENODEV);
>  
> -	clk_table = devm_kzalloc(&pdev->dev,
> -				sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
> +	clk_data = devm_kzalloc(&pdev->dev,
> +				sizeof(*clk_data) +
> +				sizeof(*clk_data->hws) * EXYNOS_AUDSS_MAX_CLKS,
>  				GFP_KERNEL);
> -	if (!clk_table)
> +	if (!clk_data)
>  		return -ENOMEM;
>  
> -	clk_data.clks = clk_table;
> -	clk_data.clk_num = variant->num_clks;
> +	clk_data->num = variant->num_clks;
> +	clk_table = clk_data->hws;
>  
>  	pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
>  	pll_in = devm_clk_get(&pdev->dev, "pll_in");
> @@ -176,7 +177,7 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
>  			}
>  		}
>  	}
> -	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
> +	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
>  				mout_audss_p, ARRAY_SIZE(mout_audss_p),
>  				CLK_SET_RATE_NO_REPARENT,
>  				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
> @@ -187,53 +188,53 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
>  		mout_i2s_p[1] = __clk_get_name(cdclk);
>  	if (!IS_ERR(sclk_audio))
>  		mout_i2s_p[2] = __clk_get_name(sclk_audio);
> -	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
> +	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",
>  				mout_i2s_p, ARRAY_SIZE(mout_i2s_p),
>  				CLK_SET_RATE_NO_REPARENT,
>  				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
>  
> -	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
> +	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
>  				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
>  				0, &lock);
>  
> -	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
> +	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
>  				"dout_aud_bus", "dout_srp", 0,
>  				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
>  
> -	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
> +	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
>  				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
>  				&lock);
>  
> -	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
> +	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",
>  				"dout_srp", CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 0, 0, &lock);
>  
> -	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
> +	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",
>  				"dout_aud_bus", CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 2, 0, &lock);
>  
> -	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
> +	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",
>  				"dout_i2s", CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 3, 0, &lock);
>  
> -	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
> +	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",
>  				 "sclk_pcm", CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 4, 0, &lock);
>  
>  	sclk_pcm_in = devm_clk_get(&pdev->dev, "sclk_pcm_in");
>  	if (!IS_ERR(sclk_pcm_in))
>  		sclk_pcm_p = __clk_get_name(sclk_pcm_in);
> -	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
> +	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",
>  				sclk_pcm_p, CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 5, 0, &lock);
>  
>  	if (variant->has_adma_clk) {
> -		clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
> +		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",
>  				"dout_srp", CLK_SET_RATE_PARENT,
>  				reg_base + ASS_CLK_GATE, 9, 0, &lock);
>  	}
>  
> -	for (i = 0; i < clk_data.clk_num; i++) {
> +	for (i = 0; i < clk_data->num; i++) {
>  		if (IS_ERR(clk_table[i])) {
>  			dev_err(&pdev->dev, "failed to register clock %d\n", i);
>  			ret = PTR_ERR(clk_table[i]);
> @@ -241,8 +242,8 @@ static int exynos_audss_clk_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
> -					&clk_data);
> +	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
> +				     clk_data);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to add clock provider\n");
>  		goto unregister;
>
Hi Chanwoo,

On 06/09/2017 03:33 AM, Chanwoo Choi wrote:
> I tested this patch[1] which was applied on Sylwester's git repo.
> [1]https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.13/clk/next&id=6622c52f47372186c17548ca7398c229c45e6215
> 
> When I tested it on XU3, I can't get the kernel booting.

Thanks for checking this, it seems I didn't appply v3 patches from Marek.
I corrected this now and tested on Odroid-XU3. The right patches should
be now in the for-v4.13/clk/next branch.
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
index cb7df358a27d..85edeb738853 100644
--- a/drivers/clk/samsung/clk-exynos-audss.c
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -22,9 +22,8 @@ 
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 static DEFINE_SPINLOCK(lock);
-static struct clk **clk_table;
 static void __iomem *reg_base;
-static struct clk_onecell_data clk_data;
+static struct clk_hw_onecell_data *clk_data;
 /*
  * On Exynos5420 this will be a clock which has to be enabled before any
  * access to audss registers. Typically a child of EPLL.
@@ -110,18 +109,18 @@  static void exynos_audss_clk_teardown(void)
 	int i;
 
 	for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_mux(clk_table[i]);
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_mux(clk_data->hws[i]);
 	}
 
 	for (; i < EXYNOS_SRP_CLK; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_divider(clk_table[i]);
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_divider(clk_data->hws[i]);
 	}
 
-	for (; i < clk_data.clk_num; i++) {
-		if (!IS_ERR(clk_table[i]))
-			clk_unregister_gate(clk_table[i]);
+	for (; i < clk_data->num; i++) {
+		if (!IS_ERR(clk_data->hws[i]))
+			clk_hw_unregister_gate(clk_data->hws[i]);
 	}
 }
 
@@ -133,6 +132,7 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 	const char *sclk_pcm_p = "sclk_pcm0";
 	struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in;
 	const struct exynos_audss_clk_drvdata *variant;
+	struct clk_hw **clk_table;
 	struct resource *res;
 	int i, ret = 0;
 
@@ -149,14 +149,15 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 
 	epll = ERR_PTR(-ENODEV);
 
-	clk_table = devm_kzalloc(&pdev->dev,
-				sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+	clk_data = devm_kzalloc(&pdev->dev,
+				sizeof(*clk_data) +
+				sizeof(*clk_data->hws) * EXYNOS_AUDSS_MAX_CLKS,
 				GFP_KERNEL);
-	if (!clk_table)
+	if (!clk_data)
 		return -ENOMEM;
 
-	clk_data.clks = clk_table;
-	clk_data.clk_num = variant->num_clks;
+	clk_data->num = variant->num_clks;
+	clk_table = clk_data->hws;
 
 	pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
 	pll_in = devm_clk_get(&pdev->dev, "pll_in");
@@ -176,7 +177,7 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 			}
 		}
 	}
-	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss",
 				mout_audss_p, ARRAY_SIZE(mout_audss_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
@@ -187,53 +188,53 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		mout_i2s_p[1] = __clk_get_name(cdclk);
 	if (!IS_ERR(sclk_audio))
 		mout_i2s_p[2] = __clk_get_name(sclk_audio);
-	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+	clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(NULL, "mout_i2s",
 				mout_i2s_p, ARRAY_SIZE(mout_i2s_p),
 				CLK_SET_RATE_NO_REPARENT,
 				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+	clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(NULL, "dout_srp",
 				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
 				0, &lock);
 
-	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(NULL,
 				"dout_aud_bus", "dout_srp", 0,
 				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
 
-	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+	clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(NULL, "dout_i2s",
 				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
 				&lock);
 
-	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+	clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(NULL, "srp_clk",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 0, 0, &lock);
 
-	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+	clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(NULL, "i2s_bus",
 				"dout_aud_bus", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 2, 0, &lock);
 
-	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+	clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(NULL, "sclk_i2s",
 				"dout_i2s", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 3, 0, &lock);
 
-	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+	clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(NULL, "pcm_bus",
 				 "sclk_pcm", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 4, 0, &lock);
 
 	sclk_pcm_in = devm_clk_get(&pdev->dev, "sclk_pcm_in");
 	if (!IS_ERR(sclk_pcm_in))
 		sclk_pcm_p = __clk_get_name(sclk_pcm_in);
-	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+	clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(NULL, "sclk_pcm",
 				sclk_pcm_p, CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 5, 0, &lock);
 
 	if (variant->has_adma_clk) {
-		clk_table[EXYNOS_ADMA] = clk_register_gate(NULL, "adma",
+		clk_table[EXYNOS_ADMA] = clk_hw_register_gate(NULL, "adma",
 				"dout_srp", CLK_SET_RATE_PARENT,
 				reg_base + ASS_CLK_GATE, 9, 0, &lock);
 	}
 
-	for (i = 0; i < clk_data.clk_num; i++) {
+	for (i = 0; i < clk_data->num; i++) {
 		if (IS_ERR(clk_table[i])) {
 			dev_err(&pdev->dev, "failed to register clock %d\n", i);
 			ret = PTR_ERR(clk_table[i]);
@@ -241,8 +242,8 @@  static int exynos_audss_clk_probe(struct platform_device *pdev)
 		}
 	}
 
-	ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
-					&clk_data);
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     clk_data);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add clock provider\n");
 		goto unregister;