Message ID | 1497001756-942-6-git-send-email-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote: > Switch to the stable UART bindings by adding a XTAL node and using the > proper compatible strings. > > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Shouldn't this patch be squashed with patch 4 ? > --- > arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi > index b0fc91f..a334fbe 100644 > --- a/arch/arm/boot/dts/meson6.dtsi > +++ b/arch/arm/boot/dts/meson6.dtsi > @@ -70,9 +70,37 @@ > }; > }; > > + xtal: xtal-clk { > + compatible = "fixed-clock"; > + clock-frequency = <24000000>; > + clock-output-names = "xtal"; > + #clock-cells = <0>; > + }; > + > clk81: clk@0 { > #clock-cells = <0>; > compatible = "fixed-clock"; > clock-frequency = <200000000>; > }; > }; /* end of / */ > + > + > +&uart_AO { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_A { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_B { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +}; > + > +&uart_C { > + clocks = <&xtal>, <&clk81>, <&clk81>; > + clock-names = "xtal", "pclk", "baud"; > +};
On 06/12/2017 11:42 AM, Jerome Brunet wrote: > On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote: >> Switch to the stable UART bindings by adding a XTAL node and using the >> proper compatible strings. >> >> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > > Shouldn't this patch be squashed with patch 4 ? > Yep, so it doesn't break bisect. Neil > >> --- >> arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++ >> 1 file changed, 28 insertions(+) >> >> diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi >> index b0fc91f..a334fbe 100644 >> --- a/arch/arm/boot/dts/meson6.dtsi >> +++ b/arch/arm/boot/dts/meson6.dtsi >> @@ -70,9 +70,37 @@ >> }; >> }; >> >> + xtal: xtal-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <24000000>; >> + clock-output-names = "xtal"; >> + #clock-cells = <0>; >> + }; >> + >> clk81: clk@0 { >> #clock-cells = <0>; >> compatible = "fixed-clock"; >> clock-frequency = <200000000>; >> }; >> }; /* end of / */ >> + >> + >> +&uart_AO { >> + clocks = <&xtal>, <&clk81>, <&clk81>; >> + clock-names = "xtal", "pclk", "baud"; >> +}; >> + >> +&uart_A { >> + clocks = <&xtal>, <&clk81>, <&clk81>; >> + clock-names = "xtal", "pclk", "baud"; >> +}; >> + >> +&uart_B { >> + clocks = <&xtal>, <&clk81>, <&clk81>; >> + clock-names = "xtal", "pclk", "baud"; >> +}; >> + >> +&uart_C { >> + clocks = <&xtal>, <&clk81>, <&clk81>; >> + clock-names = "xtal", "pclk", "baud"; >> +}; >
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index b0fc91f..a334fbe 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -70,9 +70,37 @@ }; }; + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + clk81: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <200000000>; }; }; /* end of / */ + + +&uart_AO { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_A { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clk81>, <&clk81>; + clock-names = "xtal", "pclk", "baud"; +};
Switch to the stable UART bindings by adding a XTAL node and using the proper compatible strings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)