Message ID | 20170616213703.21487-2-f.fainelli@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Jun 16, 2017 at 02:36:59PM -0700, Florian Fainelli wrote: > Update the Broadcom STB binding document with new compatible strings for > the DDR PHY and memory controller found on newer chips. The subject should be more specific what this patch is doing. > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt > index 0d0c1ae81bed..790e6b0b8306 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt > +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt > @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. > > Required properties: > - compatible : should contain one of these > + "brcm,brcmstb-ddr-phy-v71.1" > + "brcm,brcmstb-ddr-phy-v72.0" > "brcm,brcmstb-ddr-phy-v225.1" > "brcm,brcmstb-ddr-phy-v240.1" > "brcm,brcmstb-ddr-phy-v240.2" > @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh > Power-Down (SRPD), among other things. > > Required properties: > -- compatible : should contain "brcm,brcmstb-memc-ddr" > +- compatible : should contain one of these > + "brcm,brcmstb-memc-ddr-rev-b.2.2" > + "brcm,brcmstb-memc-ddr" > - reg : the MEMC DDR register range > > Example: > -- > 2.9.3 >
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bed..790e6b0b8306 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example:
Update the Broadcom STB binding document with new compatible strings for the DDR PHY and memory controller found on newer chips. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)