diff mbox

[V1,1/9] dt-bindings: Add Spreadtrum CCU binding documentation

Message ID 20170618015855.27738-2-chunyan.zhang@spreadtrum.com (mailing list archive)
State Changes Requested
Delegated to: Stephen Boyd
Headers show

Commit Message

Chunyan Zhang June 18, 2017, 1:58 a.m. UTC 
Introduce a new binding with its documentation for Spreadtrum clock
sub-framework.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
 .../devicetree/bindings/clock/sprd-ccu.txt         | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd-ccu.txt

Comments

Rob Herring (Arm) June 23, 2017, 8:05 p.m. UTC | #1 
On Sun, Jun 18, 2017 at 09:58:47AM +0800, Chunyan Zhang wrote:
> Introduce a new binding with its documentation for Spreadtrum clock
> sub-framework.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
>  .../devicetree/bindings/clock/sprd-ccu.txt         | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/sprd-ccu.txt

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/sprd-ccu.txt b/Documentation/devicetree/bindings/clock/sprd-ccu.txt
new file mode 100644
index 0000000..7a1aa4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd-ccu.txt
@@ -0,0 +1,46 @@ 
+Spreadtrum Clock Control Unit Binding
+------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- compatible: must contain the following compatible:
+                - "sprd,sc9860-ccu" (only support SC9860 for the time being)
+
+- reg:	Must contain the registers base address and length.
+	Clocks on most of Spreadtrum's SoCs were designed to locate in a few
+	different address areas, so there would be more than one items under
+	this property.
+
+- clock-names:	Must contain the following clock names:
+		- "ext-26m", "ext-rco-100m", "ext-32k"
+- #clock-cells: must be 1
+
+Example:
+
+ccu: clk {
+	compatible = "sprd,sc9860-ccu";
+	#clock-cells = <1>;
+	reg = <0 0x20000000 0 0x400>,
+	      <0 0x20210000 0 0x3000>,
+	      <0 0x402b0000 0 0x4000>,
+	      <0 0x402d0000 0 0x400>,
+	      <0 0x402e0000 0 0x4000>,
+	      <0 0x40400000 0 0x400>,
+	      <0 0x40880000 0 0x400>,
+	      <0 0x415e0000 0 0x400>,
+	      <0 0x60200000 0 0x400>,
+	      <0 0x61000000 0 0x400>,
+	      <0 0x61100000 0 0x3000>,
+	      <0 0x62000000 0 0x4000>,
+	      <0 0x62100000 0 0x4000>,
+	      <0 0x63000000 0 0x400>,
+	      <0 0x63100000 0 0x3000>,
+	      <0 0x70b00000 0 0x3000>;
+	clocks = <&ext_26m>, <&ext_rco_100m>, <&ext_32k>;
+	clock-names = "ext-26m", "ext-rco-100m", "ext-32k";
+};
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+