Message ID | 20170628211921.5638-1-killertofu@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Jason, On Jun 28 2017 or thereabouts, Jason Gerecke wrote: > The 'wacom_update_name' function is responsible for producing names for > the input device nodes based on the hardware device name. Commit f2209d4 > added the ability to strip off prefixes like "Wacom Co.,Ltd." where the > prefix was immediately (and redundantly) followed by "Wacom". The > 2nd-generation Intuos Pro 2 has such a prefix, but with a small error > (the period and comma are swapped) that prevents the existing code from > matching it. We're loath to extend the number of cases out endlessly and > so instead try to be smarter about name generation. > > We observe that the cause of the redundant prefixes is HID combining the > manufacturer and product strings of USB devices together. By using the > original product name (with "Wacom" prefixed, if it does not already > exist in the string) we can bypass the gyrations to find and remove > redundant prefixes. Other devices either don't have a manufacturer string > that needs to be removed (Bluetooth, uhid) or should have their name > generated from scratch (I2C). > Sorry for nitpicking, but I have a couple of comments: > Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> > --- > Changes from v2: > * Use export/extern to directly gain access to the usb_hid_driver struct > for comparison to ll_driver (rather than scanning through the list of > USB devices for a matching parent). > > drivers/hid/usbhid/hid-core.c | 1 + > drivers/hid/wacom_sys.c | 60 +++++++++++++++++++++---------------------- > 2 files changed, 30 insertions(+), 31 deletions(-) > > diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c > index 83772fa7d92a..4a7a306995a9 100644 > --- a/drivers/hid/usbhid/hid-core.c > +++ b/drivers/hid/usbhid/hid-core.c > @@ -1269,6 +1269,7 @@ static struct hid_ll_driver usb_hid_driver = { > .output_report = usbhid_output_report, > .idle = usbhid_idle, > }; > +EXPORT_SYMBOL_GPL(usb_hid_driver); I would rather see this in a separate commit (in case we need to revert this one, we shouldn't revert the export). > > static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *id) > { > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > index 0022c0dac88a..94d493c724c8 100644 > --- a/drivers/hid/wacom_sys.c > +++ b/drivers/hid/wacom_sys.c > @@ -22,6 +22,8 @@ > #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP) > #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP) > > +extern struct hid_ll_driver usb_hid_driver; Ouch. I'd rather see that one in drivers/hid/usbhid/usbhid.h I would like also to have the following in usbhid.h, that you can reuse later in the patch: static inline bool hid_is_using_usbhid(struct hid_device *hdev) { return hdev->ll_driver == &usb_hid_driver; } > + > static int wacom_get_report(struct hid_device *hdev, u8 type, u8 *buf, > size_t size, unsigned int retries) > { > @@ -2026,41 +2028,37 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix) > > /* Generic devices name unspecified */ > if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) { > - if (strstr(wacom->hdev->name, "Wacom") || > - strstr(wacom->hdev->name, "wacom") || > - strstr(wacom->hdev->name, "WACOM")) { > - /* name is in HID descriptor, use it */ > - strlcpy(name, wacom->hdev->name, sizeof(name)); > - > - /* strip out excess whitespaces */ > - while (1) { > - char *gap = strstr(name, " "); > - if (gap == NULL) > - break; > - /* shift everything including the terminator */ > - memmove(gap, gap+1, strlen(gap)); > - } > + char *product_name = wacom->hdev->name; > > - /* strip off excessive prefixing */ > - if (strstr(name, "Wacom Co.,Ltd. Wacom ") == name) { > - int n = strlen(name); > - int x = strlen("Wacom Co.,Ltd. "); > - memmove(name, name+x, n-x+1); > - } > - if (strstr(name, "Wacom Co., Ltd. Wacom ") == name) { > - int n = strlen(name); > - int x = strlen("Wacom Co., Ltd. "); > - memmove(name, name+x, n-x+1); > - } > + if (wacom->hdev->ll_driver == &usb_hid_driver) { > + struct usb_interface *intf = to_usb_interface(wacom->hdev->dev.parent); > + struct usb_device *dev = interface_to_usbdev(intf); > + product_name = dev->product; > + } > > - /* get rid of trailing whitespace */ > - if (name[strlen(name)-1] == ' ') > - name[strlen(name)-1] = '\0'; > + if (wacom->hdev->bus == BUS_I2C) { > + snprintf(name, sizeof(name), "%s %X", > + features->name, wacom->hdev->product); > + } else if (strstr(product_name, "Wacom") || > + strstr(product_name, "wacom") || > + strstr(product_name, "WACOM")) { > + strlcpy(name, product_name, sizeof(name)); > } else { > - /* no meaningful name retrieved. use product ID */ > - snprintf(name, sizeof(name), > - "%s %X", features->name, wacom->hdev->product); > + snprintf(name, sizeof(name), "Wacom %s", product_name); > } > + > + /* strip out excess whitespaces */ > + while (1) { > + char *gap = strstr(name, " "); > + if (gap == NULL) > + break; > + /* shift everything including the terminator */ > + memmove(gap, gap+1, strlen(gap)); > + } > + > + /* get rid of trailing whitespace */ > + if (name[strlen(name)-1] == ' ') > + name[strlen(name)-1] = '\0'; > } else { > strlcpy(name, features->name, sizeof(name)); > } > -- > 2.13.1 > Rest looks good to me. Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On June 29, 2017 7:10:21 AM PDT, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote: >Hi Jason, > >On Jun 28 2017 or thereabouts, Jason Gerecke wrote: >> The 'wacom_update_name' function is responsible for producing names >for >> the input device nodes based on the hardware device name. Commit >f2209d4 >> added the ability to strip off prefixes like "Wacom Co.,Ltd." where >the >> prefix was immediately (and redundantly) followed by "Wacom". The >> 2nd-generation Intuos Pro 2 has such a prefix, but with a small error >> (the period and comma are swapped) that prevents the existing code >from >> matching it. We're loath to extend the number of cases out endlessly >and >> so instead try to be smarter about name generation. >> >> We observe that the cause of the redundant prefixes is HID combining >the >> manufacturer and product strings of USB devices together. By using >the >> original product name (with "Wacom" prefixed, if it does not already >> exist in the string) we can bypass the gyrations to find and remove >> redundant prefixes. Other devices either don't have a manufacturer >string >> that needs to be removed (Bluetooth, uhid) or should have their name >> generated from scratch (I2C). >> > >Sorry for nitpicking, but I have a couple of comments: > Might as well get the patch right :) >> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> >> --- >> Changes from v2: >> * Use export/extern to directly gain access to the usb_hid_driver >struct >> for comparison to ll_driver (rather than scanning through the list >of >> USB devices for a matching parent). >> >> drivers/hid/usbhid/hid-core.c | 1 + >> drivers/hid/wacom_sys.c | 60 >+++++++++++++++++++++---------------------- >> 2 files changed, 30 insertions(+), 31 deletions(-) >> >> diff --git a/drivers/hid/usbhid/hid-core.c >b/drivers/hid/usbhid/hid-core.c >> index 83772fa7d92a..4a7a306995a9 100644 >> --- a/drivers/hid/usbhid/hid-core.c >> +++ b/drivers/hid/usbhid/hid-core.c >> @@ -1269,6 +1269,7 @@ static struct hid_ll_driver usb_hid_driver = { >> .output_report = usbhid_output_report, >> .idle = usbhid_idle, >> }; >> +EXPORT_SYMBOL_GPL(usb_hid_driver); > >I would rather see this in a separate commit (in case we need to revert >this one, we shouldn't revert the export). > Ack. Left it here momentarily to keep mail noise down while the review process chugs along :) >> >> static int usbhid_probe(struct usb_interface *intf, const struct >usb_device_id *id) >> { >> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c >> index 0022c0dac88a..94d493c724c8 100644 >> --- a/drivers/hid/wacom_sys.c >> +++ b/drivers/hid/wacom_sys.c >> @@ -22,6 +22,8 @@ >> #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP) >> #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP) >> >> +extern struct hid_ll_driver usb_hid_driver; > >Ouch. I'd rather see that one in drivers/hid/usbhid/usbhid.h > >I would like also to have the following in usbhid.h, that you can reuse >later in the patch: >static inline bool hid_is_using_usbhid(struct hid_device *hdev) >{ > return hdev->ll_driver == &usb_hid_driver; >} > As I mentioned earlier, our input-wacom driver can't access usbhid.h. I don't imagine a patch to make usbhid.h public would be accepted, and I am strongly against requiring our users to have a copy of their distro's full kernel source tree (not just development headers) merely to compile our driver. Certainly we could create our own definition of `hid_is_using_usbhid` within input-wacom which only uses otherwise-public functions, but it'd be a hack that we'd have to maintain indefinitely. I'm looking to create a patch which can work both upstream and downstream (hence my earlier awkward `wacom_is_real_usb` function that used only public functions). Would it be reasonable to define `hid_is_using_usbhid` within hid.h instead? I'm guessing the answer is "no" since the function is transport-specific, but knowing what specific ll_driver is in use /is/ something useful to any HID driver... Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours.... > >> + >> static int wacom_get_report(struct hid_device *hdev, u8 type, u8 >*buf, >> size_t size, unsigned int retries) >> { >> @@ -2026,41 +2028,37 @@ static void wacom_update_name(struct wacom >*wacom, const char *suffix) >> >> /* Generic devices name unspecified */ >> if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", >features->name)) { >> - if (strstr(wacom->hdev->name, "Wacom") || >> - strstr(wacom->hdev->name, "wacom") || >> - strstr(wacom->hdev->name, "WACOM")) { >> - /* name is in HID descriptor, use it */ >> - strlcpy(name, wacom->hdev->name, sizeof(name)); >> - >> - /* strip out excess whitespaces */ >> - while (1) { >> - char *gap = strstr(name, " "); >> - if (gap == NULL) >> - break; >> - /* shift everything including the terminator */ >> - memmove(gap, gap+1, strlen(gap)); >> - } >> + char *product_name = wacom->hdev->name; >> >> - /* strip off excessive prefixing */ >> - if (strstr(name, "Wacom Co.,Ltd. Wacom ") == name) { >> - int n = strlen(name); >> - int x = strlen("Wacom Co.,Ltd. "); >> - memmove(name, name+x, n-x+1); >> - } >> - if (strstr(name, "Wacom Co., Ltd. Wacom ") == name) { >> - int n = strlen(name); >> - int x = strlen("Wacom Co., Ltd. "); >> - memmove(name, name+x, n-x+1); >> - } >> + if (wacom->hdev->ll_driver == &usb_hid_driver) { >> + struct usb_interface *intf = >to_usb_interface(wacom->hdev->dev.parent); >> + struct usb_device *dev = interface_to_usbdev(intf); >> + product_name = dev->product; >> + } >> >> - /* get rid of trailing whitespace */ >> - if (name[strlen(name)-1] == ' ') >> - name[strlen(name)-1] = '\0'; >> + if (wacom->hdev->bus == BUS_I2C) { >> + snprintf(name, sizeof(name), "%s %X", >> + features->name, wacom->hdev->product); >> + } else if (strstr(product_name, "Wacom") || >> + strstr(product_name, "wacom") || >> + strstr(product_name, "WACOM")) { >> + strlcpy(name, product_name, sizeof(name)); >> } else { >> - /* no meaningful name retrieved. use product ID */ >> - snprintf(name, sizeof(name), >> - "%s %X", features->name, wacom->hdev->product); >> + snprintf(name, sizeof(name), "Wacom %s", product_name); >> } >> + >> + /* strip out excess whitespaces */ >> + while (1) { >> + char *gap = strstr(name, " "); >> + if (gap == NULL) >> + break; >> + /* shift everything including the terminator */ >> + memmove(gap, gap+1, strlen(gap)); >> + } >> + >> + /* get rid of trailing whitespace */ >> + if (name[strlen(name)-1] == ' ') >> + name[strlen(name)-1] = '\0'; >> } else { >> strlcpy(name, features->name, sizeof(name)); >> } >> -- >> 2.13.1 >> > >Rest looks good to me. > >Cheers, >Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Jun 29 2017 or thereabouts, Jason Gerecke wrote: > On June 29, 2017 7:10:21 AM PDT, Benjamin Tissoires > <benjamin.tissoires@redhat.com> wrote: > >Hi Jason, > > > >On Jun 28 2017 or thereabouts, Jason Gerecke wrote: > >> The 'wacom_update_name' function is responsible for producing names > >for > >> the input device nodes based on the hardware device name. Commit > >f2209d4 > >> added the ability to strip off prefixes like "Wacom Co.,Ltd." where > >the > >> prefix was immediately (and redundantly) followed by "Wacom". The > >> 2nd-generation Intuos Pro 2 has such a prefix, but with a small error > >> (the period and comma are swapped) that prevents the existing code > >from > >> matching it. We're loath to extend the number of cases out endlessly > >and > >> so instead try to be smarter about name generation. > >> > >> We observe that the cause of the redundant prefixes is HID combining > >the > >> manufacturer and product strings of USB devices together. By using > >the > >> original product name (with "Wacom" prefixed, if it does not already > >> exist in the string) we can bypass the gyrations to find and remove > >> redundant prefixes. Other devices either don't have a manufacturer > >string > >> that needs to be removed (Bluetooth, uhid) or should have their name > >> generated from scratch (I2C). > >> > > > >Sorry for nitpicking, but I have a couple of comments: > > > > Might as well get the patch right :) > > >> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> > >> --- > >> Changes from v2: > >> * Use export/extern to directly gain access to the usb_hid_driver > >struct > >> for comparison to ll_driver (rather than scanning through the list > >of > >> USB devices for a matching parent). > >> > >> drivers/hid/usbhid/hid-core.c | 1 + > >> drivers/hid/wacom_sys.c | 60 > >+++++++++++++++++++++---------------------- > >> 2 files changed, 30 insertions(+), 31 deletions(-) > >> > >> diff --git a/drivers/hid/usbhid/hid-core.c > >b/drivers/hid/usbhid/hid-core.c > >> index 83772fa7d92a..4a7a306995a9 100644 > >> --- a/drivers/hid/usbhid/hid-core.c > >> +++ b/drivers/hid/usbhid/hid-core.c > >> @@ -1269,6 +1269,7 @@ static struct hid_ll_driver usb_hid_driver = { > >> .output_report = usbhid_output_report, > >> .idle = usbhid_idle, > >> }; > >> +EXPORT_SYMBOL_GPL(usb_hid_driver); > > > >I would rather see this in a separate commit (in case we need to revert > >this one, we shouldn't revert the export). > > > > Ack. Left it here momentarily to keep mail noise down while the review > process chugs along :) > > >> > >> static int usbhid_probe(struct usb_interface *intf, const struct > >usb_device_id *id) > >> { > >> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > >> index 0022c0dac88a..94d493c724c8 100644 > >> --- a/drivers/hid/wacom_sys.c > >> +++ b/drivers/hid/wacom_sys.c > >> @@ -22,6 +22,8 @@ > >> #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP) > >> #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP) > >> > >> +extern struct hid_ll_driver usb_hid_driver; > > > >Ouch. I'd rather see that one in drivers/hid/usbhid/usbhid.h > > > >I would like also to have the following in usbhid.h, that you can reuse > >later in the patch: > >static inline bool hid_is_using_usbhid(struct hid_device *hdev) > >{ > > return hdev->ll_driver == &usb_hid_driver; > >} > > > > As I mentioned earlier, our input-wacom driver can't access usbhid.h. Oops, sorry, I forgot this detail. > I don't imagine a patch to make usbhid.h public would be accepted, and Nah... :) > I am strongly against requiring our users to have a copy of their > distro's full kernel source tree (not just development headers) merely > to compile our driver. Certainly we could create our own definition of > `hid_is_using_usbhid` within input-wacom which only uses > otherwise-public functions, but it'd be a hack that we'd have to > maintain indefinitely. I'm looking to create a patch which can work > both upstream and downstream (hence my earlier awkward > `wacom_is_real_usb` function that used only public functions). But why don't you just add a usbhid/usbhid.h file downstream containing just the export and this inlined function? You can just sync this extra header when changes are coming. > > Would it be reasonable to define `hid_is_using_usbhid` within hid.h > instead? I'm guessing the answer is "no" since the function is > transport-specific, but knowing what specific ll_driver is in use /is/ > something useful to any HID driver... That's a tough question. Depending on how I look, both arguments are valid. Still, I have a slight preference for having a hid_is_using_usbhid() function in usbhid.h instead of plain hid.h. OTOH, I would think having a more generic approach would be fine: bool inline bool hid_is_using_driver(struct hid_device *hdev, struct hid_ll_driver *driver) { return dev->ll_driver == driver; } And we can start adding the various extern definitions of the ll_drivers in hid.h too... How does that sound? Jiri? Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/29/2017 09:07 AM, Benjamin Tissoires wrote: > On Jun 29 2017 or thereabouts, Jason Gerecke wrote: >> On June 29, 2017 7:10:21 AM PDT, Benjamin Tissoires >> <benjamin.tissoires@redhat.com> wrote: >>> Hi Jason, >>> >>> On Jun 28 2017 or thereabouts, Jason Gerecke wrote: >>>> The 'wacom_update_name' function is responsible for producing names >>> for >>>> the input device nodes based on the hardware device name. Commit >>> f2209d4 >>>> added the ability to strip off prefixes like "Wacom Co.,Ltd." where >>> the >>>> prefix was immediately (and redundantly) followed by "Wacom". The >>>> 2nd-generation Intuos Pro 2 has such a prefix, but with a small error >>>> (the period and comma are swapped) that prevents the existing code >>> from >>>> matching it. We're loath to extend the number of cases out endlessly >>> and >>>> so instead try to be smarter about name generation. >>>> >>>> We observe that the cause of the redundant prefixes is HID combining >>> the >>>> manufacturer and product strings of USB devices together. By using >>> the >>>> original product name (with "Wacom" prefixed, if it does not already >>>> exist in the string) we can bypass the gyrations to find and remove >>>> redundant prefixes. Other devices either don't have a manufacturer >>> string >>>> that needs to be removed (Bluetooth, uhid) or should have their name >>>> generated from scratch (I2C). >>>> >>> >>> Sorry for nitpicking, but I have a couple of comments: >>> >> >> Might as well get the patch right :) >> >>>> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> >>>> --- >>>> Changes from v2: >>>> * Use export/extern to directly gain access to the usb_hid_driver >>> struct >>>> for comparison to ll_driver (rather than scanning through the list >>> of >>>> USB devices for a matching parent). >>>> >>>> drivers/hid/usbhid/hid-core.c | 1 + >>>> drivers/hid/wacom_sys.c | 60 >>> +++++++++++++++++++++---------------------- >>>> 2 files changed, 30 insertions(+), 31 deletions(-) >>>> >>>> diff --git a/drivers/hid/usbhid/hid-core.c >>> b/drivers/hid/usbhid/hid-core.c >>>> index 83772fa7d92a..4a7a306995a9 100644 >>>> --- a/drivers/hid/usbhid/hid-core.c >>>> +++ b/drivers/hid/usbhid/hid-core.c >>>> @@ -1269,6 +1269,7 @@ static struct hid_ll_driver usb_hid_driver = { >>>> .output_report = usbhid_output_report, >>>> .idle = usbhid_idle, >>>> }; >>>> +EXPORT_SYMBOL_GPL(usb_hid_driver); >>> >>> I would rather see this in a separate commit (in case we need to revert >>> this one, we shouldn't revert the export). >>> >> >> Ack. Left it here momentarily to keep mail noise down while the review >> process chugs along :) >> >>>> >>>> static int usbhid_probe(struct usb_interface *intf, const struct >>> usb_device_id *id) >>>> { >>>> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c >>>> index 0022c0dac88a..94d493c724c8 100644 >>>> --- a/drivers/hid/wacom_sys.c >>>> +++ b/drivers/hid/wacom_sys.c >>>> @@ -22,6 +22,8 @@ >>>> #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP) >>>> #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP) >>>> >>>> +extern struct hid_ll_driver usb_hid_driver; >>> >>> Ouch. I'd rather see that one in drivers/hid/usbhid/usbhid.h >>> >>> I would like also to have the following in usbhid.h, that you can reuse >>> later in the patch: >>> static inline bool hid_is_using_usbhid(struct hid_device *hdev) >>> { >>> return hdev->ll_driver == &usb_hid_driver; >>> } >>> >> >> As I mentioned earlier, our input-wacom driver can't access usbhid.h. > > Oops, sorry, I forgot this detail. > >> I don't imagine a patch to make usbhid.h public would be accepted, and > > Nah... :) > >> I am strongly against requiring our users to have a copy of their >> distro's full kernel source tree (not just development headers) merely >> to compile our driver. Certainly we could create our own definition of >> `hid_is_using_usbhid` within input-wacom which only uses >> otherwise-public functions, but it'd be a hack that we'd have to >> maintain indefinitely. I'm looking to create a patch which can work >> both upstream and downstream (hence my earlier awkward >> `wacom_is_real_usb` function that used only public functions). > > But why don't you just add a usbhid/usbhid.h file downstream containing > just the export and this inlined function? > > You can just sync this extra header when changes are coming. > I'd not considered this. Keeping watch over that header for changes is still not ideal, but at least its copy/paste instead of different code. I think I could accept that maintenance burden. >> >> Would it be reasonable to define `hid_is_using_usbhid` within hid.h >> instead? I'm guessing the answer is "no" since the function is >> transport-specific, but knowing what specific ll_driver is in use /is/ >> something useful to any HID driver... > > That's a tough question. Depending on how I look, both arguments are > valid. Still, I have a slight preference for having a > hid_is_using_usbhid() function in usbhid.h instead of plain hid.h. > > OTOH, I would think having a more generic approach would be fine: > bool inline bool hid_is_using_driver(struct hid_device *hdev, > struct hid_ll_driver *driver) > { > return dev->ll_driver == driver; > } > > And we can start adding the various extern definitions of the > ll_drivers in hid.h too... > > How does that sound? Jiri? > > Cheers, > Benjamin > From my viewpoint this would be ideal since it doesn't require us to copy and indefinitely maintain upstream code locally. Jason --- Now instead of four in the eights place / you’ve got three, ‘Cause you added one / (That is to say, eight) to the two, / But you can’t take seven from three, / So you look at the sixty-fours.... -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 29 Jun 2017, Benjamin Tissoires wrote: > OTOH, I would think having a more generic approach would be fine: > bool inline bool hid_is_using_driver(struct hid_device *hdev, > struct hid_ll_driver *driver) > { > return dev->ll_driver == driver; > } > > And we can start adding the various extern definitions of the > ll_drivers in hid.h too... > > How does that sound? Jiri? Yeah, I find it slightly ugly, but at least it's generic :)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 83772fa7d92a..4a7a306995a9 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1269,6 +1269,7 @@ static struct hid_ll_driver usb_hid_driver = { .output_report = usbhid_output_report, .idle = usbhid_idle, }; +EXPORT_SYMBOL_GPL(usb_hid_driver); static int usbhid_probe(struct usb_interface *intf, const struct usb_device_id *id) { diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index 0022c0dac88a..94d493c724c8 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -22,6 +22,8 @@ #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP) #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP) +extern struct hid_ll_driver usb_hid_driver; + static int wacom_get_report(struct hid_device *hdev, u8 type, u8 *buf, size_t size, unsigned int retries) { @@ -2026,41 +2028,37 @@ static void wacom_update_name(struct wacom *wacom, const char *suffix) /* Generic devices name unspecified */ if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) { - if (strstr(wacom->hdev->name, "Wacom") || - strstr(wacom->hdev->name, "wacom") || - strstr(wacom->hdev->name, "WACOM")) { - /* name is in HID descriptor, use it */ - strlcpy(name, wacom->hdev->name, sizeof(name)); - - /* strip out excess whitespaces */ - while (1) { - char *gap = strstr(name, " "); - if (gap == NULL) - break; - /* shift everything including the terminator */ - memmove(gap, gap+1, strlen(gap)); - } + char *product_name = wacom->hdev->name; - /* strip off excessive prefixing */ - if (strstr(name, "Wacom Co.,Ltd. Wacom ") == name) { - int n = strlen(name); - int x = strlen("Wacom Co.,Ltd. "); - memmove(name, name+x, n-x+1); - } - if (strstr(name, "Wacom Co., Ltd. Wacom ") == name) { - int n = strlen(name); - int x = strlen("Wacom Co., Ltd. "); - memmove(name, name+x, n-x+1); - } + if (wacom->hdev->ll_driver == &usb_hid_driver) { + struct usb_interface *intf = to_usb_interface(wacom->hdev->dev.parent); + struct usb_device *dev = interface_to_usbdev(intf); + product_name = dev->product; + } - /* get rid of trailing whitespace */ - if (name[strlen(name)-1] == ' ') - name[strlen(name)-1] = '\0'; + if (wacom->hdev->bus == BUS_I2C) { + snprintf(name, sizeof(name), "%s %X", + features->name, wacom->hdev->product); + } else if (strstr(product_name, "Wacom") || + strstr(product_name, "wacom") || + strstr(product_name, "WACOM")) { + strlcpy(name, product_name, sizeof(name)); } else { - /* no meaningful name retrieved. use product ID */ - snprintf(name, sizeof(name), - "%s %X", features->name, wacom->hdev->product); + snprintf(name, sizeof(name), "Wacom %s", product_name); } + + /* strip out excess whitespaces */ + while (1) { + char *gap = strstr(name, " "); + if (gap == NULL) + break; + /* shift everything including the terminator */ + memmove(gap, gap+1, strlen(gap)); + } + + /* get rid of trailing whitespace */ + if (name[strlen(name)-1] == ' ') + name[strlen(name)-1] = '\0'; } else { strlcpy(name, features->name, sizeof(name)); }
The 'wacom_update_name' function is responsible for producing names for the input device nodes based on the hardware device name. Commit f2209d4 added the ability to strip off prefixes like "Wacom Co.,Ltd." where the prefix was immediately (and redundantly) followed by "Wacom". The 2nd-generation Intuos Pro 2 has such a prefix, but with a small error (the period and comma are swapped) that prevents the existing code from matching it. We're loath to extend the number of cases out endlessly and so instead try to be smarter about name generation. We observe that the cause of the redundant prefixes is HID combining the manufacturer and product strings of USB devices together. By using the original product name (with "Wacom" prefixed, if it does not already exist in the string) we can bypass the gyrations to find and remove redundant prefixes. Other devices either don't have a manufacturer string that needs to be removed (Bluetooth, uhid) or should have their name generated from scratch (I2C). Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> --- Changes from v2: * Use export/extern to directly gain access to the usb_hid_driver struct for comparison to ll_driver (rather than scanning through the list of USB devices for a matching parent). drivers/hid/usbhid/hid-core.c | 1 + drivers/hid/wacom_sys.c | 60 +++++++++++++++++++++---------------------- 2 files changed, 30 insertions(+), 31 deletions(-)