Message ID | 20170627092806.28181-1-clabbe.montjoie@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
From: Corentin Labbe <clabbe.montjoie@gmail.com> Date: Tue, 27 Jun 2017 11:28:01 +0200 > The current way to find if the phy is internal is to compare DT phy-mode > and emac_variant/internal_phy. > But it will negate a possible future SoC where an external PHY use the > same phy mode than the internal one. > > By using phy-mode = "internal" we permit to have an external PHY with > the same mode than the internal one. > > Reported-by: André Przywara <andre.przywara@arm.com> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Series applied. Please provide a proper "[PATCH 0/n] " header posting next time.
在 2017-06-30 00:23,David Miller 写道: > From: Corentin Labbe <clabbe.montjoie@gmail.com> > Date: Tue, 27 Jun 2017 11:28:01 +0200 > >> The current way to find if the phy is internal is to compare DT >> phy-mode >> and emac_variant/internal_phy. >> But it will negate a possible future SoC where an external PHY use the >> same phy mode than the internal one. >> >> By using phy-mode = "internal" we permit to have an external PHY with >> the same mode than the internal one. >> >> Reported-by: André Przywara <andre.przywara@arm.com> >> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > Series applied. I think there's still some problems around for this patchset... The definition of "internal" is internal *proprietary* PHY, but the internal PHY of Allwinner SoCs seem to be MII... See [1]. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-June/516159.html > > Please provide a proper "[PATCH 0/n] " header posting next time.
On Thu, Jun 29, 2017 at 12:23:49PM -0400, David Miller wrote: > From: Corentin Labbe <clabbe.montjoie@gmail.com> > Date: Tue, 27 Jun 2017 11:28:01 +0200 > > > The current way to find if the phy is internal is to compare DT phy-mode > > and emac_variant/internal_phy. > > But it will negate a possible future SoC where an external PHY use the > > same phy mode than the internal one. > > > > By using phy-mode = "internal" we permit to have an external PHY with > > the same mode than the internal one. > > > > Reported-by: André Przywara <andre.przywara@arm.com> > > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> > > Series applied. > > Please provide a proper "[PATCH 0/n] " header posting next time. Sorry could you wait for applying, there are a parallel thread (http://www.spinics.net/lists/devicetree/msg183520.html) and it seems finaly that internal could not be the good way to do it. Regards Sorry again, I should have sent a comment for waiting.
From: Corentin Labbe <clabbe.montjoie@gmail.com> Date: Thu, 29 Jun 2017 19:02:38 +0200 > On Thu, Jun 29, 2017 at 12:23:49PM -0400, David Miller wrote: >> From: Corentin Labbe <clabbe.montjoie@gmail.com> >> Date: Tue, 27 Jun 2017 11:28:01 +0200 >> >> > The current way to find if the phy is internal is to compare DT phy-mode >> > and emac_variant/internal_phy. >> > But it will negate a possible future SoC where an external PHY use the >> > same phy mode than the internal one. >> > >> > By using phy-mode = "internal" we permit to have an external PHY with >> > the same mode than the internal one. >> > >> > Reported-by: André Przywara <andre.przywara@arm.com> >> > Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> >> >> Series applied. >> >> Please provide a proper "[PATCH 0/n] " header posting next time. > > Sorry could you wait for applying, there are a parallel thread (http://www.spinics.net/lists/devicetree/msg183520.html) and it seems finaly that internal could not be the good way to do it. > > Regards > Sorry again, I should have sent a comment for waiting. Please send me a revert patch, when I say I've applied it I already pushed it out to my GIT tree.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index fffd6d5fc907..6c2d1da05588 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -638,7 +638,7 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) { struct sunxi_priv_data *gmac = priv->plat->bsp_priv; struct device_node *node = priv->device->of_node; - int ret; + int ret, phy_interface; u32 reg, val; regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val); @@ -718,7 +718,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) if (gmac->variant->support_rmii) reg &= ~SYSCON_RMII_EN; - switch (priv->plat->interface) { + phy_interface = priv->plat->interface; + /* if PHY is internal, select the mode (xMII) used by the SoC */ + if (gmac->use_internal_phy) + phy_interface = gmac->variant->internal_phy; + switch (phy_interface) { case PHY_INTERFACE_MODE_MII: /* default */ break; @@ -932,7 +936,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev) } plat_dat->interface = of_get_phy_mode(dev->of_node); - if (plat_dat->interface == gmac->variant->internal_phy) { + if (plat_dat->interface == PHY_INTERFACE_MODE_INTERNAL) { dev_info(&pdev->dev, "Will use internal PHY\n"); gmac->use_internal_phy = true; gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
The current way to find if the phy is internal is to compare DT phy-mode and emac_variant/internal_phy. But it will negate a possible future SoC where an external PHY use the same phy mode than the internal one. By using phy-mode = "internal" we permit to have an external PHY with the same mode than the internal one. Reported-by: André Przywara <andre.przywara@arm.com> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)