Message ID | 20170628233131.19114-1-grygorii.strashko@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: > IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers > warning if it happns, since commit 04c848d39879 ("genirq: Warn when > IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for > OMAP DWC 3 driver. > > Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before > disabling PM runtime in probe error path handling. Or, how about requesting the irq at the end of probe after extcon registration? > > Fixes: 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with...") > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > --- > drivers/usb/dwc3/dwc3-omap.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c > index 9892650..cd9bef5 100644 > --- a/drivers/usb/dwc3/dwc3-omap.c > +++ b/drivers/usb/dwc3/dwc3-omap.c > @@ -512,7 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) > > /* check the DMA Status */ > reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); > - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); > ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, > dwc3_omap_interrupt_thread, IRQF_SHARED, > "dwc3-omap", omap); > @@ -533,10 +532,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) > } > > dwc3_omap_enable_irqs(omap); > - enable_irq(omap->irq); > return 0; > > err1: > + disable_irq(omap->irq); > pm_runtime_put_sync(dev); > pm_runtime_disable(dev); > >
* Vignesh R <vigneshr@ti.com> [170628 21:21]: > > > On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: > > IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers > > warning if it happns, since commit 04c848d39879 ("genirq: Warn when > > IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for > > OMAP DWC 3 driver. > > > > Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before > > disabling PM runtime in probe error path handling. > > Or, how about requesting the irq at the end of probe after extcon > registration? Hmm yeah, what prevents the issue that we tried to fix with commit 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler in probe")? Regards, Tony > > Fixes: 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with...") > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > > --- > > drivers/usb/dwc3/dwc3-omap.c | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c > > index 9892650..cd9bef5 100644 > > --- a/drivers/usb/dwc3/dwc3-omap.c > > +++ b/drivers/usb/dwc3/dwc3-omap.c > > @@ -512,7 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) > > > > /* check the DMA Status */ > > reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); > > - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); > > ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, > > dwc3_omap_interrupt_thread, IRQF_SHARED, > > "dwc3-omap", omap); > > @@ -533,10 +532,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) > > } > > > > dwc3_omap_enable_irqs(omap); > > - enable_irq(omap->irq); > > return 0; > > > > err1: > > + disable_irq(omap->irq); > > pm_runtime_put_sync(dev); > > pm_runtime_disable(dev); > > > > > > -- > Regards > Vignesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/29/2017 01:03 AM, Tony Lindgren wrote: > * Vignesh R <vigneshr@ti.com> [170628 21:21]: >> >> >> On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: >>> IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers >>> warning if it happns, since commit 04c848d39879 ("genirq: Warn when >>> IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for >>> OMAP DWC 3 driver. >>> >>> Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before >>> disabling PM runtime in probe error path handling. >> >> Or, how about requesting the irq at the end of probe after extcon >> registration? > > Hmm yeah, what prevents the issue that we tried to fix with commit > 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler > in probe")? No, I think. There should be the disable_irq() call any way before pm_runtime_put_sync(dev);| pm_runtime_disable(dev); - once IRQ is requested driver can't know if IRQ handler is running now or not unless it will call disable_irq()/free_irq(). But, I've also thought about moving request_irq() down (seems it can be moved even after of_platform_populate()). looks like it can be separate patch. >>> Fixes: 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with...") >>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >>> --- >>> drivers/usb/dwc3/dwc3-omap.c | 3 +-- >>> 1 file changed, 1 insertion(+), 2 deletions(-) >>> >>> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c >>> index 9892650..cd9bef5 100644 >>> --- a/drivers/usb/dwc3/dwc3-omap.c >>> +++ b/drivers/usb/dwc3/dwc3-omap.c >>> @@ -512,7 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) >>> >>> /* check the DMA Status */ >>> reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); >>> - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); >>> ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, >>> dwc3_omap_interrupt_thread, IRQF_SHARED, >>> "dwc3-omap", omap); >>> @@ -533,10 +532,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) >>> } >>> >>> dwc3_omap_enable_irqs(omap); >>> - enable_irq(omap->irq); >>> return 0; >>> >>> err1: >>> + disable_irq(omap->irq); >>> pm_runtime_put_sync(dev); >>> pm_runtime_disable(dev); >>>
Hi, On Saturday 01 July 2017 01:04 AM, Strashko, Grygorii wrote: > > > On 06/29/2017 01:03 AM, Tony Lindgren wrote: >> * Vignesh R <vigneshr@ti.com> [170628 21:21]: >>> >>> >>> On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: >>>> IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers >>>> warning if it happns, since commit 04c848d39879 ("genirq: Warn when >>>> IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for >>>> OMAP DWC 3 driver. >>>> >>>> Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before >>>> disabling PM runtime in probe error path handling. >>> >>> Or, how about requesting the irq at the end of probe after extcon >>> registration? >> >> Hmm yeah, what prevents the issue that we tried to fix with commit >> 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler >> in probe")? > > No, I think. There should be the disable_irq() call any way > before pm_runtime_put_sync(dev);| pm_runtime_disable(dev); - > once IRQ is requested driver can't know if IRQ handler is running now or not > unless it will call disable_irq()/free_irq(). > > But, I've also thought about moving request_irq() down (seems > it can be moved even after of_platform_populate()). > looks like it can be separate patch. > commit 12a7f17fac5b says PM runtime can race with IRQ handler when deferred probing happening due to extcon, therefore IRQ_NOAUTOEN was set and disable_irq() call was added. If IRQ handler registration is moved to a place after of_platform_populate(), then we can be sure that extcon is registered and there wont be any deferred probe or race with irq handler and PM runtime. Would disable_irq() still be needed then? > >>>> Fixes: 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with...") >>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >>>> --- >>>> drivers/usb/dwc3/dwc3-omap.c | 3 +-- >>>> 1 file changed, 1 insertion(+), 2 deletions(-) >>>> >>>> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c >>>> index 9892650..cd9bef5 100644 >>>> --- a/drivers/usb/dwc3/dwc3-omap.c >>>> +++ b/drivers/usb/dwc3/dwc3-omap.c >>>> @@ -512,7 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) >>>> >>>> /* check the DMA Status */ >>>> reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); >>>> - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); >>>> ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, >>>> dwc3_omap_interrupt_thread, IRQF_SHARED, >>>> "dwc3-omap", omap); >>>> @@ -533,10 +532,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) >>>> } >>>> >>>> dwc3_omap_enable_irqs(omap); >>>> - enable_irq(omap->irq); >>>> return 0; >>>> >>>> err1: >>>> + disable_irq(omap->irq); >>>> pm_runtime_put_sync(dev); >>>> pm_runtime_disable(dev); >>>> >
On 07/02/2017 11:27 PM, Vignesh R wrote: > Hi, > > On Saturday 01 July 2017 01:04 AM, Strashko, Grygorii wrote: >> >> >> On 06/29/2017 01:03 AM, Tony Lindgren wrote: >>> * Vignesh R <vigneshr@ti.com> [170628 21:21]: >>>> >>>> >>>> On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: >>>>> IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers >>>>> warning if it happns, since commit 04c848d39879 ("genirq: Warn when >>>>> IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for >>>>> OMAP DWC 3 driver. >>>>> >>>>> Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before >>>>> disabling PM runtime in probe error path handling. >>>> >>>> Or, how about requesting the irq at the end of probe after extcon >>>> registration? >>> >>> Hmm yeah, what prevents the issue that we tried to fix with commit >>> 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler >>> in probe")? >> >> No, I think. There should be the disable_irq() call any way >> before pm_runtime_put_sync(dev);| pm_runtime_disable(dev); - >> once IRQ is requested driver can't know if IRQ handler is running now or not >> unless it will call disable_irq()/free_irq(). >> >> But, I've also thought about moving request_irq() down (seems >> it can be moved even after of_platform_populate()). >> looks like it can be separate patch. >> > > commit 12a7f17fac5b says PM runtime can race with IRQ handler when > deferred probing happening due to extcon, therefore IRQ_NOAUTOEN was set > and disable_irq() call was added. If IRQ handler registration is moved > to a place after of_platform_populate(), then we can be sure that extcon > is registered and there wont be any deferred probe or race with irq > handler and PM runtime. Would disable_irq() still be needed then? > You might be correct, so feel free to send a patch.
Hi, On 7/3/2017 11:58 PM, Grygorii Strashko wrote: > > > On 07/02/2017 11:27 PM, Vignesh R wrote: >> Hi, >> >> On Saturday 01 July 2017 01:04 AM, Strashko, Grygorii wrote: >>> >>> >>> On 06/29/2017 01:03 AM, Tony Lindgren wrote: >>>> * Vignesh R <vigneshr@ti.com> [170628 21:21]: >>>>> >>>>> >>>>> On Thursday 29 June 2017 05:01 AM, Strashko, Grygorii wrote: >>>>>> IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will >>>>>> triggers >>>>>> warning if it happns, since commit 04c848d39879 ("genirq: Warn when >>>>>> IRQ_NOAUTOEN is used with shared interrupts"). And this is the >>>>>> case for >>>>>> OMAP DWC 3 driver. >>>>>> >>>>>> Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before >>>>>> disabling PM runtime in probe error path handling. >>>>> >>>>> Or, how about requesting the irq at the end of probe after extcon >>>>> registration? >>>> >>>> Hmm yeah, what prevents the issue that we tried to fix with commit >>>> 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with irq handler >>>> in probe")? >>> >>> No, I think. There should be the disable_irq() call any way >>> before pm_runtime_put_sync(dev);| pm_runtime_disable(dev); - >>> once IRQ is requested driver can't know if IRQ handler is running now >>> or not >>> unless it will call disable_irq()/free_irq(). >>> >>> But, I've also thought about moving request_irq() down (seems >>> it can be moved even after of_platform_populate()). >>> looks like it can be separate patch. >>> >> >> commit 12a7f17fac5b says PM runtime can race with IRQ handler when >> deferred probing happening due to extcon, therefore IRQ_NOAUTOEN was set >> and disable_irq() call was added. If IRQ handler registration is moved >> to a place after of_platform_populate(), then we can be sure that extcon >> is registered and there wont be any deferred probe or race with irq >> handler and PM runtime. Would disable_irq() still be needed then? >> > > You might be correct, so feel free to send a patch. Ok, will send a patch moving irq registration after of_platform_populate(). -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 9892650..cd9bef5 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -512,7 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) /* check the DMA Status */ reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, dwc3_omap_interrupt_thread, IRQF_SHARED, "dwc3-omap", omap); @@ -533,10 +532,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) } dwc3_omap_enable_irqs(omap); - enable_irq(omap->irq); return 0; err1: + disable_irq(omap->irq); pm_runtime_put_sync(dev); pm_runtime_disable(dev);
IRQ_NOAUTOEN can't be used with shared IRQs and Kernel now will triggers warning if it happns, since commit 04c848d39879 ("genirq: Warn when IRQ_NOAUTOEN is used with shared interrupts"). And this is the case for OMAP DWC 3 driver. Hence, remove IRQ_NOAUTOEN flag and instead call disable_irq() before disabling PM runtime in probe error path handling. Fixes: 12a7f17fac5b ("usb: dwc3: omap: fix race of pm runtime with...") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- drivers/usb/dwc3/dwc3-omap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)