Message ID | 20170623090059.8371-6-quentin.schulz@free-electrons.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Fri, 23 Jun 2017 11:00:58 +0200 Quentin Schulz <quentin.schulz@free-electrons.com> wrote: > This allows gclk to determine audio_pll rate and set the parent rate > accordingly. > > However, there are multiple children clocks that could technically > change the rate of audio_pll. Since the clock rate is usually critical > for IPs, it isn't a good idea to have multiple clocks changing audio_pll > clock rate. There isn't any rate locking system for the moment, thus > we enforce that classd_gclk be the only one allowed to change audio_pll > rate. To remain consistent, we deny other clocks to be children of > audio_pll so classd_gclk altering audio_pll rate does not impact any > other device. > > This needs to be re-worked once we have a rate locking system so two > clocks could be children of the same clock and be sure the clock rate > isn't changed by one or the other. > > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> > --- > drivers/clk/at91/clk-generated.c | 41 ++++++++++++++++++++++++++++++++++------ > 1 file changed, 35 insertions(+), 6 deletions(-) > > diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c > index 6530a2e7e84d..e66ee735a569 100644 > --- a/drivers/clk/at91/clk-generated.c > +++ b/drivers/clk/at91/clk-generated.c > @@ -26,6 +26,9 @@ > #define GENERATED_SOURCE_MAX 6 > #define GENERATED_MAX_DIV 255 > > +#define GCK_ID_CLASSD 59 > +#define GCK_INDEX_DT_AUDIO_PLL 5 > + > struct clk_generated { > struct clk_hw hw; > struct regmap *regmap; > @@ -126,15 +129,14 @@ static int clk_generated_determine_rate(struct clk_hw *hw, > { > struct clk_generated *gck = to_clk_generated(hw); > struct clk_hw *parent = NULL; > + struct clk_rate_request req_parent = *req; > long best_rate = -EINVAL; > - unsigned long min_rate; > + unsigned long min_rate, parent_rate; > int best_diff = -1; > int i; > + u32 div; > > - for (i = 0; i < clk_hw_get_num_parents(hw); i++) { > - u32 div; > - unsigned long parent_rate; > - > + for (i = 0; i < clk_hw_get_num_parents(hw) - 1; i++) { > parent = clk_hw_get_parent_by_index(hw, i); > if (!parent) > continue; > @@ -150,11 +152,37 @@ static int clk_generated_determine_rate(struct clk_hw *hw, > clk_generated_best_diff(req, parent, parent_rate, div, > &best_diff, &best_rate); > > + if (!best_diff) > + break; > + } > + > + /* > + * The audio_pll rate can be modified unlike the five others clocks that > + * should never be altered. > + * The audio_pll can technically be used by multiple consumers. However, > + * they all are likely to want to modify its rate while the rate is > + * critical for each one. Since we do not have a rate locking for the > + * moment, let classd_gclk be the only consumer of the audio_pll clock. > + */ > + > + if (gck->id != GCK_ID_CLASSD) > + goto end; As discussed on IRC with Nicolas and Cyrille, it seems we have other potential users of the audio-pll: SSC and I2S. Can you extend the test to let these GCK clks take the audio-pll? > + > + parent = clk_hw_get_parent_by_index(hw, GCK_INDEX_DT_AUDIO_PLL); > + if (!parent) > + goto end; > + > + for (div = 1; div < GENERATED_MAX_DIV + 2; div++) { > + req_parent.rate = req->rate * div; > + __clk_determine_rate(parent, &req_parent); > + clk_generated_best_diff(req, parent, req_parent.rate, div, > + &best_diff, &best_rate); > > if (!best_diff) > break; > } > > +end: > pr_debug("GCLK: %s, best_rate = %ld, parent clk: %s @ %ld\n", > __func__, best_rate, > __clk_get_name((req->best_parent_hw)->clk), > @@ -264,7 +292,8 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock, > init.ops = &generated_ops; > init.parent_names = parent_names; > init.num_parents = num_parents; > - init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; > + init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | > + CLK_SET_RATE_PARENT; > > gck->id = id; > gck->hw.init = &init; -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c index 6530a2e7e84d..e66ee735a569 100644 --- a/drivers/clk/at91/clk-generated.c +++ b/drivers/clk/at91/clk-generated.c @@ -26,6 +26,9 @@ #define GENERATED_SOURCE_MAX 6 #define GENERATED_MAX_DIV 255 +#define GCK_ID_CLASSD 59 +#define GCK_INDEX_DT_AUDIO_PLL 5 + struct clk_generated { struct clk_hw hw; struct regmap *regmap; @@ -126,15 +129,14 @@ static int clk_generated_determine_rate(struct clk_hw *hw, { struct clk_generated *gck = to_clk_generated(hw); struct clk_hw *parent = NULL; + struct clk_rate_request req_parent = *req; long best_rate = -EINVAL; - unsigned long min_rate; + unsigned long min_rate, parent_rate; int best_diff = -1; int i; + u32 div; - for (i = 0; i < clk_hw_get_num_parents(hw); i++) { - u32 div; - unsigned long parent_rate; - + for (i = 0; i < clk_hw_get_num_parents(hw) - 1; i++) { parent = clk_hw_get_parent_by_index(hw, i); if (!parent) continue; @@ -150,11 +152,37 @@ static int clk_generated_determine_rate(struct clk_hw *hw, clk_generated_best_diff(req, parent, parent_rate, div, &best_diff, &best_rate); + if (!best_diff) + break; + } + + /* + * The audio_pll rate can be modified unlike the five others clocks that + * should never be altered. + * The audio_pll can technically be used by multiple consumers. However, + * they all are likely to want to modify its rate while the rate is + * critical for each one. Since we do not have a rate locking for the + * moment, let classd_gclk be the only consumer of the audio_pll clock. + */ + + if (gck->id != GCK_ID_CLASSD) + goto end; + + parent = clk_hw_get_parent_by_index(hw, GCK_INDEX_DT_AUDIO_PLL); + if (!parent) + goto end; + + for (div = 1; div < GENERATED_MAX_DIV + 2; div++) { + req_parent.rate = req->rate * div; + __clk_determine_rate(parent, &req_parent); + clk_generated_best_diff(req, parent, req_parent.rate, div, + &best_diff, &best_rate); if (!best_diff) break; } +end: pr_debug("GCLK: %s, best_rate = %ld, parent clk: %s @ %ld\n", __func__, best_rate, __clk_get_name((req->best_parent_hw)->clk), @@ -264,7 +292,8 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock, init.ops = &generated_ops; init.parent_names = parent_names; init.num_parents = num_parents; - init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; + init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE | + CLK_SET_RATE_PARENT; gck->id = id; gck->hw.init = &init;
This allows gclk to determine audio_pll rate and set the parent rate accordingly. However, there are multiple children clocks that could technically change the rate of audio_pll. Since the clock rate is usually critical for IPs, it isn't a good idea to have multiple clocks changing audio_pll clock rate. There isn't any rate locking system for the moment, thus we enforce that classd_gclk be the only one allowed to change audio_pll rate. To remain consistent, we deny other clocks to be children of audio_pll so classd_gclk altering audio_pll rate does not impact any other device. This needs to be re-worked once we have a rate locking system so two clocks could be children of the same clock and be sure the clock rate isn't changed by one or the other. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> --- drivers/clk/at91/clk-generated.c | 41 ++++++++++++++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 6 deletions(-)