diff mbox

[v5,2/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver

Message ID 65066c74b8dedfeb8de27d90b5fecfea3a700178.1499197129.git-series.plaes@plaes.org (mailing list archive)
State New, archived
Headers show

Commit Message

Priit Laes July 4, 2017, 8:04 p.m. UTC
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.

Signed-off-by: Priit Laes <plaes@plaes.org>
---
 drivers/clk/sunxi-ng/Kconfig              |   14 +-
 drivers/clk/sunxi-ng/Makefile             |    1 +-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1448 ++++++++++++++++++++++-
 drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
 include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
 include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
 include/dt-bindings/reset/sun4i-a10-ccu.h |   67 +-
 7 files changed, 1844 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
 create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
 create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
 create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

Comments

Jonathan Liu July 9, 2017, 12:25 p.m. UTC | #1
Hi Priit,

On 5 July 2017 at 06:04, Priit Laes <plaes@plaes.org> wrote:
> Introduce a clock controller driver for sun4i A10 and sun7i A20
> series SoCs.
>
> Signed-off-by: Priit Laes <plaes@plaes.org>
> ---
>  drivers/clk/sunxi-ng/Kconfig              |   14 +-
>  drivers/clk/sunxi-ng/Makefile             |    1 +-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1448 ++++++++++++++++++++++-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
>  include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
>  include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
>  include/dt-bindings/reset/sun4i-a10-ccu.h |   67 +-
>  7 files changed, 1844 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
>  create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
>  create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
>
[snip]
> diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> new file mode 100644
> index 0000000..49052b7
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
[snip]

> +static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
> +                                           "pll-video1", "pll-video1-2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
> +                                0x150, 0, 4, 24, 2, BIT(31), 0);

hdmi_parents is in the wrong order. The correct order is "pll-video0",
"pll-video1", "pll-video0-2x", "pll-video1-2x".

Regards,
Jonathan
Olliver Schinagl July 10, 2017, 9:45 a.m. UTC | #2
Hi Pleas,

again, but this time with content :)

On 04-07-17 22:04, Priit Laes wrote:
> Introduce a clock controller driver for sun4i A10 and sun7i A20
> series SoCs.
>
> Signed-off-by: Priit Laes <plaes@plaes.org>
> ---
>  drivers/clk/sunxi-ng/Kconfig              |   14 +-
>  drivers/clk/sunxi-ng/Makefile             |    1 +-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1448 ++++++++++++++++++++++-
>  drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
>  include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
>  include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
>  include/dt-bindings/reset/sun4i-a10-ccu.h |   67 +-
>  7 files changed, 1844 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
>  create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
>  create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 7342928..381cc32 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -11,6 +11,19 @@ config SUN50I_A64_CCU
>  	default ARM64 && ARCH_SUNXI
>  	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>
> +config SUNXI_A10_CCU
I understand why you say sunXi here (it's support for both sun4i and 
sun7i) but then why A10, as it also supports the A20.

I guess the CCU is identical on the A20 and the A10, right? Thus would 
it not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu 
below?

> +	bool "Support for the Allwinner A10/A20 CCU"
> +	select SUNXI_CCU_DIV
> +	select SUNXI_CCU_MULT
> +	select SUNXI_CCU_NK
> +	select SUNXI_CCU_NKM
> +	select SUNXI_CCU_NM
> +	select SUNXI_CCU_MP
> +	select SUNXI_CCU_PHASE
> +	default MACH_SUN4I
> +	default MACH_SUN7I
> +	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
> +
>  config SUN5I_CCU
>  	bool "Support for the Allwinner sun5i family CCM"
>  	default MACH_SUN5I
> @@ -57,4 +70,5 @@ config SUN8I_R_CCU
>  	bool "Support for Allwinner SoCs' PRCM CCUs"
>  	default MACH_SUN8I || (ARCH_SUNXI && ARM64)
>
> +
oops?

>  endif
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index 0c45fa5..01e958c 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
>  obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
>  obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
>  obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
> +obj-$(CONFIG_SUNXI_A10_CCU)	+= ccu-sun4i-a10.o
>  obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
>  obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
>  obj-$(CONFIG_SUN8I_A83T_CCU)	+= ccu-sun8i-a83t.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> new file mode 100644
> index 0000000..49052b7
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c

<snip>

> +static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
> +			     0, 5,	/* M */
> +			     16, 2,	/* P */
> +			     24, 2,	/* mux */
> +			     0);
> +
> +/* Not present on A20 */
> +static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
> +		      0x05c, BIT(31), 0);

Same here I guess, two defines make this a bit more readable.
> +
> +static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
> +		      0x060, BIT(0), 0);
> +static SUNXI_CCU_GATE(ahb_ehci0_clk,	"ahb-ehci0",	"ahb",
> +		      0x060, BIT(1), 0);
> +static SUNXI_CCU_GATE(ahb_ohci0_clk,	"ahb-ohci0",	"ahb",
> +		      0x060, BIT(2), 0);
> +static SUNXI_CCU_GATE(ahb_ehci1_clk,	"ahb-ehci1",	"ahb",
> +		      0x060, BIT(3), 0);
> +static SUNXI_CCU_GATE(ahb_ohci1_clk,	"ahb-ohci1",	"ahb",
> +		      0x060, BIT(4), 0);
> +static SUNXI_CCU_GATE(ahb_ss_clk,	"ahb-ss",	"ahb",
> +		      0x060, BIT(5), 0);
> +static SUNXI_CCU_GATE(ahb_dma_clk,	"ahb-dma",	"ahb",
> +		      0x060, BIT(6), 0);
> +static SUNXI_CCU_GATE(ahb_bist_clk,	"ahb-bist",	"ahb",
> +		      0x060, BIT(7), 0);
> +static SUNXI_CCU_GATE(ahb_mmc0_clk,	"ahb-mmc0",	"ahb",
> +		      0x060, BIT(8), 0);
> +static SUNXI_CCU_GATE(ahb_mmc1_clk,	"ahb-mmc1",	"ahb",
> +		      0x060, BIT(9), 0);
> +static SUNXI_CCU_GATE(ahb_mmc2_clk,	"ahb-mmc2",	"ahb",
> +		      0x060, BIT(10), 0);
> +static SUNXI_CCU_GATE(ahb_mmc3_clk,	"ahb-mmc3",	"ahb",
> +		      0x060, BIT(11), 0);
> +static SUNXI_CCU_GATE(ahb_ms_clk,	"ahb-ms",	"ahb",
> +		      0x060, BIT(12), 0);
> +static SUNXI_CCU_GATE(ahb_nand_clk,	"ahb-nand",	"ahb",
> +		      0x060, BIT(13), 0);
> +static SUNXI_CCU_GATE(ahb_sdram_clk,	"ahb-sdram",	"ahb",
> +		      0x060, BIT(14), CLK_IS_CRITICAL);

<snip>

> +static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
> +	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
> +	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
> +	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
> +	[RST_GPS]		= { 0x0d0, BIT(0) },
> +	[RST_DE_BE0]		= { 0x104, BIT(30) },
> +	[RST_DE_BE1]		= { 0x108, BIT(30) },
> +	[RST_DE_FE0]		= { 0x10c, BIT(30) },
> +	[RST_DE_FE1]		= { 0x110, BIT(30) },
> +	[RST_DE_MP]		= { 0x114, BIT(30) },
> +	[RST_TCON0]		= { 0x118, BIT(30) },
> +	[RST_TCON1]		= { 0x11c, BIT(30) },
You are missing the TV encoder reset:
+      [RST_TVE0]              = { 0x118, BIT(29) },
+      [RST_TVE1]              = { 0x11c, BIT(29) },

(to match your table i did not use defines :p)

> +	[RST_CSI0]		= { 0x134, BIT(30) },
> +	[RST_CSI1]		= { 0x138, BIT(30) },
> +	[RST_VE]		= { 0x13c, BIT(0) },
> +	[RST_ACE]		= { 0x148, BIT(16) },
> +	[RST_LVDS]		= { 0x14c, BIT(0) },
> +	[RST_GPU]		= { 0x154, BIT(30) },
> +	[RST_HDMI_H]		= { 0x170, BIT(0) },
> +	[RST_HDMI_SYS]		= { 0x170, BIT(1) },
> +	[RST_HDMI_AUDIO_DMA]	= { 0x170, BIT(2) },
> +};

<snip>

> +#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
> +#define _DT_BINDINGS_RST_SUN4I_A10_H
> +
> +#define	RST_USB_PHY0		1
> +#define	RST_USB_PHY1		2
> +#define	RST_USB_PHY2		3
> +#define	RST_GPS			4
> +#define	RST_DE_BE0		5
> +#define	RST_DE_BE1		6
> +#define	RST_DE_FE0		7
> +#define	RST_DE_FE1		8
> +#define	RST_DE_MP		9
> +#define	RST_TCON0		10
> +#define	RST_TCON1		11

Also here the TV encoder.

+#define RST_TVE0              21
+#define RST_TVE1              22

> +#define	RST_CSI0		12
> +#define	RST_CSI1		13
> +#define	RST_VE			14
> +#define	RST_ACE			15
> +#define	RST_LVDS		16
> +#define	RST_GPU			17
> +#define	RST_HDMI_H		18
> +#define	RST_HDMI_SYS		19
> +#define	RST_HDMI_AUDIO_DMA	20
> +
> +#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
>
Priit Laes July 13, 2017, 7:12 p.m. UTC | #3
On Sun, Jul 09, 2017 at 10:25:23PM +1000, Jonathan Liu wrote:
> Hi Priit,
> 
> On 5 July 2017 at 06:04, Priit Laes <plaes@plaes.org> wrote:
> > Introduce a clock controller driver for sun4i A10 and sun7i A20
> > series SoCs.
> >
> > Signed-off-by: Priit Laes <plaes@plaes.org>
> > ---
> >  drivers/clk/sunxi-ng/Kconfig              |   14 +-
> >  drivers/clk/sunxi-ng/Makefile             |    1 +-
> >  drivers/clk/sunxi-ng/ccu-sun4i-a10.c      | 1448 ++++++++++++++++++++++-
> >  drivers/clk/sunxi-ng/ccu-sun4i-a10.h      |   61 +-
> >  include/dt-bindings/clock/sun4i-a10-ccu.h |  200 +++-
> >  include/dt-bindings/clock/sun7i-a20-ccu.h |   53 +-
> >  include/dt-bindings/reset/sun4i-a10-ccu.h |   67 +-
> >  7 files changed, 1844 insertions(+)
> >  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> >  create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
> >  create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
> >  create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
> >  create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
> >
> [snip]
> > diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> > new file mode 100644
> > index 0000000..49052b7
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> [snip]
> 
> > +static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
> > +                                           "pll-video1", "pll-video1-2x" };
> > +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
> > +                                0x150, 0, 4, 24, 2, BIT(31), 0);
> 
> hdmi_parents is in the wrong order. The correct order is "pll-video0",
> "pll-video1", "pll-video0-2x", "pll-video1-2x".

Ugh.. I'm really sorry.

Päikest,
Priit
Priit Laes July 13, 2017, 7:23 p.m. UTC | #4
On Mon, Jul 10, 2017 at 11:45:32AM +0200, Olliver Schinagl wrote:
> Hi Pleas,
> 
> again, but this time with content :)
> 
> On 04-07-17 22:04, Priit Laes wrote:
> >Introduce a clock controller driver for sun4i A10 and sun7i A20
> >series SoCs.

[ ... ]

> >+++ b/drivers/clk/sunxi-ng/Kconfig
> >@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
> > 	default ARM64 && ARCH_SUNXI
> > 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
> >
> >+config SUNXI_A10_CCU
> I understand why you say sunXi here (it's support for both sun4i and sun7i)
> but then why A10, as it also supports the A20.
> 
> I guess the CCU is identical on the A20 and the A10, right? Thus would it
> not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?

No, it's not identical.

> >+	bool "Support for the Allwinner A10/A20 CCU"
> >+	select SUNXI_CCU_DIV
> >+	select SUNXI_CCU_MULT
> >+	select SUNXI_CCU_NK
> >+	select SUNXI_CCU_NKM
> >+	select SUNXI_CCU_NM
> >+	select SUNXI_CCU_MP
> >+	select SUNXI_CCU_PHASE
> >+	default MACH_SUN4I
> >+	default MACH_SUN7I
> >+	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
> >+
> > config SUN5I_CCU
> > 	bool "Support for the Allwinner sun5i family CCM"
> > 	default MACH_SUN5I
> >@@ -57,4 +70,5 @@ config SUN8I_R_CCU
> > 	bool "Support for Allwinner SoCs' PRCM CCUs"
> > 	default MACH_SUN8I || (ARCH_SUNXI && ARM64)
> >
> >+
> oops?

OK

> 
> >new file mode 100644
> >index 0000000..49052b7
> >--- /dev/null
> >+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
> 
> <snip>
> 
> >+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
> >+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
> >+			     0, 5,	/* M */
> >+			     16, 2,	/* P */
> >+			     24, 2,	/* mux */
> >+			     0);
> >+
> >+/* Not present on A20 */
> >+static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
> >+		      0x05c, BIT(31), 0);
> 
> Same here I guess, two defines make this a bit more readable.

You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
I don't think it makes things more readable...

> >+
> >+static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
...
> >+		      0x060, BIT(14), CLK_IS_CRITICAL);
> 
> <snip>
> 
> >+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
> >+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
> >+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
> >+	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
> >+	[RST_GPS]		= { 0x0d0, BIT(0) },
> >+	[RST_DE_BE0]		= { 0x104, BIT(30) },
> >+	[RST_DE_BE1]		= { 0x108, BIT(30) },
> >+	[RST_DE_FE0]		= { 0x10c, BIT(30) },
> >+	[RST_DE_FE1]		= { 0x110, BIT(30) },
> >+	[RST_DE_MP]		= { 0x114, BIT(30) },
> >+	[RST_TCON0]		= { 0x118, BIT(30) },
> >+	[RST_TCON1]		= { 0x11c, BIT(30) },
> You are missing the TV encoder reset:
> +      [RST_TVE0]              = { 0x118, BIT(29) },
> +      [RST_TVE1]              = { 0x11c, BIT(29) },
> 
> (to match your table i did not use defines :p)

Where did you get this information?
This is not present in any datasheets I have:
  * A10 - 1.50
  * A20 - 1.4

[...]

Päikest,
Priit Laes
Olliver Schinagl July 13, 2017, 7:46 p.m. UTC | #5
Hey Priit,

On 07/13/17 21:23, Priit Laes wrote:
> On Mon, Jul 10, 2017 at 11:45:32AM +0200, Olliver Schinagl wrote:
>> Hi Pleas,
>>
>> again, but this time with content :)
>>
>> On 04-07-17 22:04, Priit Laes wrote:
>>> Introduce a clock controller driver for sun4i A10 and sun7i A20
>>> series SoCs.
> [ ... ]
>
>>> +++ b/drivers/clk/sunxi-ng/Kconfig
>>> @@ -11,6 +11,19 @@ config SUN50I_A64_CCU
>>> 	default ARM64 && ARCH_SUNXI
>>> 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>>>
>>> +config SUNXI_A10_CCU
>> I understand why you say sunXi here (it's support for both sun4i and sun7i)
>> but then why A10, as it also supports the A20.
>>
>> I guess the CCU is identical on the A20 and the A10, right? Thus would it
>> not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?
> No, it's not identical.
But then saying SUNXI_A10_CCU is not correct? Since it is not identical
on the A20? So what does the A10 stand for?
>
>>> +	bool "Support for the Allwinner A10/A20 CCU"
>>> +	select SUNXI_CCU_DIV
>>> +	select SUNXI_CCU_MULT
>>> +	select SUNXI_CCU_NK
>>> +	select SUNXI_CCU_NKM
>>> +	select SUNXI_CCU_NM
>>> +	select SUNXI_CCU_MP
>>> +	select SUNXI_CCU_PHASE
>>> +	default MACH_SUN4I
>>> +	default MACH_SUN7I
>>> +	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
>>> +
>>> config SUN5I_CCU
>>> 	bool "Support for the Allwinner sun5i family CCM"
>>> 	default MACH_SUN5I
>>> @@ -57,4 +70,5 @@ config SUN8I_R_CCU
>>> 	bool "Support for Allwinner SoCs' PRCM CCUs"
>>> 	default MACH_SUN8I || (ARCH_SUNXI && ARM64)
>>>
>>> +
>> oops?
> OK
>
>>> new file mode 100644
>>> index 0000000..49052b7
>>> --- /dev/null
>>> +++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
>> <snip>
>>
>>> +static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
>>> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
>>> +			     0, 5,	/* M */
>>> +			     16, 2,	/* P */
>>> +			     24, 2,	/* mux */
>>> +			     0);
>>> +
>>> +/* Not present on A20 */
>>> +static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
>>> +		      0x05c, BIT(31), 0);
>> Same here I guess, two defines make this a bit more readable.
> You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
> I don't think it makes things more readable...
you think 0x05c and BIT(31) are easier to read? I'll do a pop quiz in 6
months from now and see if you remember :p
>
>>> +
>>> +static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
> ...
>>> +		      0x060, BIT(14), CLK_IS_CRITICAL);
>> <snip>
>>
>>> +static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
>>> +	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
>>> +	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
>>> +	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
>>> +	[RST_GPS]		= { 0x0d0, BIT(0) },
>>> +	[RST_DE_BE0]		= { 0x104, BIT(30) },
>>> +	[RST_DE_BE1]		= { 0x108, BIT(30) },
>>> +	[RST_DE_FE0]		= { 0x10c, BIT(30) },
>>> +	[RST_DE_FE1]		= { 0x110, BIT(30) },
>>> +	[RST_DE_MP]		= { 0x114, BIT(30) },
>>> +	[RST_TCON0]		= { 0x118, BIT(30) },
>>> +	[RST_TCON1]		= { 0x11c, BIT(30) },
>> You are missing the TV encoder reset:
>> +      [RST_TVE0]              = { 0x118, BIT(29) },
>> +      [RST_TVE1]              = { 0x11c, BIT(29) },
>>
>> (to match your table i did not use defines :p)
> Where did you get this information?
> This is not present in any datasheets I have:
>   * A10 - 1.50
>   * A20 - 1.4
It is actually from the A13. In the A13 all the other bits match up. We
know from both that TCON0 is at 0x118 with its reset at BIT(30) and
TCON1 has its reset 0x11c. From the A13 datasheet we gather that TCON(0)
and TV(0) are at 0x118 with RST_TV on BIT(31) and thus it is only
logical that that for the TVE1 we have the rest at 0x11c.

But this is writing from the top of my head, I think we can also find it
in the 3.4 sources if I recall correctly.
>
> [...]
>
> Päikest,
> Priit Laes
Priit Laes July 14, 2017, 1:48 p.m. UTC | #6
On Thu, Jul 13, 2017 at 09:46:57PM +0200, Olliver Schinagl wrote:
> Hey Priit,
> 
> On 07/13/17 21:23, Priit Laes wrote:
> > On Mon, Jul 10, 2017 at 11:45:32AM +0200, Olliver Schinagl wrote:
> >> Hi Pleas,
> >>
> >> again, but this time with content :)
> >>
> >> On 04-07-17 22:04, Priit Laes wrote:
> >>> Introduce a clock controller driver for sun4i A10 and sun7i A20
> >>> series SoCs.
> > [ ... ]
> >
> >>> +++ b/drivers/clk/sunxi-ng/Kconfig
> >>> @@ -11,6 +11,19 @@ config SUN50I_A64_CCU
> >>> 	default ARM64 && ARCH_SUNXI
> >>> 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
> >>>
> >>> +config SUNXI_A10_CCU
> >> I understand why you say sunXi here (it's support for both sun4i and sun7i)
> >> but then why A10, as it also supports the A20.
> >>
> >> I guess the CCU is identical on the A20 and the A10, right? Thus would it
> >> not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?
> > No, it's not identical.
> But then saying SUNXI_A10_CCU is not correct? Since it is not identical
> on the A20? So what does the A10 stand for?

There's no easy way it supports both SUN4I_A10 and SUN7I_A20, therefore
I used SUNXI_A10 where SUNXI may indicate it's not only for SUN4I and
I'm currently keeping it as is...

[ ... ]
> >>> +/* Not present on A20 */
> >>> +static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
> >>> +		      0x05c, BIT(31), 0);
> >> Same here I guess, two defines make this a bit more readable.
> > You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
> > I don't think it makes things more readable...
> you think 0x05c and BIT(31) are easier to read? I'll do a pop quiz in 6
> months from now and see if you remember :p

Can you give an example on how it should be written?

> >
> >>> +
> >>> +static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
> > ...
> >>> +		      0x060, BIT(14), CLK_IS_CRITICAL);
> >> <snip>
> >>
> >>> +static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
> >>> +	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
> >>> +	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
> >>> +	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
> >>> +	[RST_GPS]		= { 0x0d0, BIT(0) },
> >>> +	[RST_DE_BE0]		= { 0x104, BIT(30) },
> >>> +	[RST_DE_BE1]		= { 0x108, BIT(30) },
> >>> +	[RST_DE_FE0]		= { 0x10c, BIT(30) },
> >>> +	[RST_DE_FE1]		= { 0x110, BIT(30) },
> >>> +	[RST_DE_MP]		= { 0x114, BIT(30) },
> >>> +	[RST_TCON0]		= { 0x118, BIT(30) },
> >>> +	[RST_TCON1]		= { 0x11c, BIT(30) },
> >> You are missing the TV encoder reset:
> >> +      [RST_TVE0]              = { 0x118, BIT(29) },
> >> +      [RST_TVE1]              = { 0x11c, BIT(29) },
> >>
> >> (to match your table i did not use defines :p)
> > Where did you get this information?
> > This is not present in any datasheets I have:
> >   * A10 - 1.50
> >   * A20 - 1.4
> It is actually from the A13. In the A13 all the other bits match up. We
> know from both that TCON0 is at 0x118 with its reset at BIT(30) and
> TCON1 has its reset 0x11c. From the A13 datasheet we gather that TCON(0)
> and TV(0) are at 0x118 with RST_TV on BIT(31) and thus it is only
> logical that that for the TVE1 we have the rest at 0x11c.
> 
> But this is writing from the top of my head, I think we can also find it
> in the 3.4 sources if I recall correctly.

Thanks, added the reset bits for TVE0/1.

Päikest,
Priit :)
diff mbox

Patch

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7342928..381cc32 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@  config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUNXI_A10_CCU
+	bool "Support for the Allwinner A10/A20 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_MULT
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN4I
+	default MACH_SUN7I
+	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
 config SUN5I_CCU
 	bool "Support for the Allwinner sun5i family CCM"
 	default MACH_SUN5I
@@ -57,4 +70,5 @@  config SUN8I_R_CCU
 	bool "Support for Allwinner SoCs' PRCM CCUs"
 	default MACH_SUN8I || (ARCH_SUNXI && ARM64)
 
+
 endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0c45fa5..01e958c 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@  lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
 obj-$(CONFIG_SUN8I_A83T_CCU)	+= ccu-sun8i-a83t.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1448 @@ 
+/*
+ * Copyright (c) 2017 Priit Laes <plaes@plaes.org>.
+ * Copyright (c) 2017 Maxime Ripard.
+ * Copyright (c) 2017 Jonathan Liu.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-core",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG	0x008
+static struct ccu_nm pll_audio_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+	.m		= _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+	.common		= {
+		.reg		= 0x008,
+		.hw.init	= CLK_HW_INIT("pll-audio-base",
+					      "hosc",
+					      &ccu_nm_ops,
+					      0),
+	},
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+					  270000000, 297000000),
+	.common		= {
+		.reg		= 0x010,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video0",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.m		= _SUNXI_CCU_DIV(0, 2),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nkmp_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ve",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+		   CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x020,
+		.hw.init	= CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x028,
+		.hw.init	= CLK_HW_INIT("pll-periph-base",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+			2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+static struct ccu_div pll_periph_sata_clk = {
+	.enable		= BIT(14),
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.fixed_post_div	= 6,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph-sata",
+					      "pll-periph-base",
+					      &ccu_div_ops, 0),
+	},
+};
+
+static struct ccu_mult pll_video1_clk = {
+	.enable		= BIT(31),
+	.mult		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+	.frac		= _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+				  270000000, 297000000),
+	.common		= {
+		.reg		= 0x030,
+		.features	= (CCU_FEATURE_FRACTIONAL |
+				   CCU_FEATURE_ALL_PREDIV),
+		.prediv		= 8,
+		.hw.init	= CLK_HW_INIT("pll-video1",
+					      "hosc",
+					      &ccu_mult_ops,
+					      0),
+	},
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+	.enable		= BIT(31),
+	.n		= _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+	.k		= _SUNXI_CCU_MULT(4, 2),
+	.common		= {
+		.reg		= 0x040,
+		.hw.init	= CLK_HW_INIT("pll-gpu",
+					      "hosc",
+					      &ccu_nk_ops,
+					      0),
+	},
+};
+
+static SUNXI_CCU_GATE(hosc_clk,	"hosc",	"osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+					   "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+	{ .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG		0x054
+static struct ccu_mux cpu_clk = {
+	.mux		= {
+		.shift		= 16,
+		.width		= 2,
+		.fixed_predivs	= cpu_predivs,
+		.n_predivs	= ARRAY_SIZE(cpu_predivs),
+	},
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("cpu",
+						      cpu_parents,
+						      &ccu_mux_ops,
+						      CLK_IS_CRITICAL),
+	}
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+	},
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+						 "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+	{ .index = 1, .div = 2, },
+	{ /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= {
+		.shift		= 6,
+		.width		= 2,
+		.fixed_predivs	= ahb_sun7i_predivs,
+		.n_predivs	= ARRAY_SIZE(ahb_sun7i_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb",
+						      ahb_sun7i_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb0_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+			   0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk,	"axi-dram",	"ahb",
+		      0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk,	"ahb-otg",	"ahb",
+		      0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk,	"ahb-ehci0",	"ahb",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk,	"ahb-ohci0",	"ahb",
+		      0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk,	"ahb-ehci1",	"ahb",
+		      0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk,	"ahb-ohci1",	"ahb",
+		      0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk,	"ahb-ss",	"ahb",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk,	"ahb-dma",	"ahb",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk,	"ahb-bist",	"ahb",
+		      0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk,	"ahb-mmc0",	"ahb",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk,	"ahb-mmc1",	"ahb",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk,	"ahb-mmc2",	"ahb",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk,	"ahb-mmc3",	"ahb",
+		      0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk,	"ahb-ms",	"ahb",
+		      0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk,	"ahb-nand",	"ahb",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk,	"ahb-sdram",	"ahb",
+		      0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk,	"ahb-ace",	"ahb",
+		      0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk,	"ahb-emac",	"ahb",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk,	"ahb-ts",	"ahb",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk,	"ahb-spi0",	"ahb",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk,	"ahb-spi1",	"ahb",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk,	"ahb-spi2",	"ahb",
+		      0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk,	"ahb-spi3",	"ahb",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk,	"ahb-pata",	"ahb",
+		      0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk,	"ahb-sata",	"ahb",
+		      0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk,	"ahb-gps",	"ahb",
+		      0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk,	"ahb-hstimer",	"ahb",
+		      0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk,	"ahb-ve",	"ahb",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk,	"ahb-tvd",	"ahb",
+		      0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk,	"ahb-tve0",	"ahb",
+		      0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk,	"ahb-tve1",	"ahb",
+		      0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk,	"ahb-lcd0",	"ahb",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk,	"ahb-lcd1",	"ahb",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk,	"ahb-csi0",	"ahb",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk,	"ahb-csi1",	"ahb",
+		      0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk,	"ahb-hdmi1",	"ahb",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk,	"ahb-hdmi0",	"ahb",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk,	"ahb-de-be0",	"ahb",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk,	"ahb-de-be1",	"ahb",
+		      0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk,	"ahb-de-fe0",	"ahb",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk,	"ahb-de-fe1",	"ahb",
+		      0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk,	"ahb-gmac",	"ahb",
+		      0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk,	"ahb-mp",	"ahb",
+		      0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk,	"ahb-gpu",	"ahb",
+		      0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk,	"apb0-codec",	"apb0",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk,	"apb0-spdif",	"apb0",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk,	"apb0-ac97",	"apb0",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk,	"apb0-i2s0",	"apb0",
+		      0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk,	"apb0-i2s1",	"apb0",
+		      0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk,	"apb0-pio",	"apb0",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk,	"apb0-ir0",	"apb0",
+		      0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk,	"apb0-ir1",	"apb0",
+		      0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk,	"apb0-i2s2",	"apb0",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk,	"apb0-keypad",	"apb0",
+		      0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk,	"apb1-i2c0",	"apb1",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk,	"apb1-i2c1",	"apb1",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk,	"apb1-i2c2",	"apb1",
+		      0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk,	"apb1-i2c3",	"apb1",
+		      0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk,	"apb1-can",	"apb1",
+		      0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk,	"apb1-scr",	"apb1",
+		      0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk,	"apb1-ps20",	"apb1",
+		      0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk,	"apb1-ps21",	"apb1",
+		      0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk,	"apb1-i2c4",	"apb1",
+		      0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk,	"apb1-uart0",	"apb1",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk,	"apb1-uart1",	"apb1",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk,	"apb1-uart2",	"apb1",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk,	"apb1-uart3",	"apb1",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk,	"apb1-uart4",	"apb1",
+		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk,	"apb1-uart5",	"apb1",
+		      0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk,	"apb1-uart6",	"apb1",
+		      0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk,	"apb1-uart7",	"apb1",
+		      0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+						     "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+		       0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+		       0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+						"pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+						"pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					      "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+			       0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(0, 5),
+	.p		= _SUNXI_CCU_DIV(16, 2),
+	.mux		= _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+	.common		= {
+		.reg		= 0x0c4,
+		.hw.init	= CLK_HW_INIT_PARENTS("keypad",
+						      keypad_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+			       0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"pll-periph",
+		      0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"pll-periph",
+		      0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk,	"usb-phy",	"pll-periph",
+		      0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+			       0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+			       0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"pll-ddr",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk,	"dram-csi0",	"pll-ddr",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk,	"dram-csi1",	"pll-ddr",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"pll-ddr",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"pll-ddr",
+		      0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk,	"dram-tve0",	"pll-ddr",
+		      0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk,	"dram-tve1",	"pll-ddr",
+		      0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk,	"dram-out",	"pll-ddr",
+		      0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk,	"dram-de-fe1",	"pll-ddr",
+		      0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk,	"dram-de-fe0",	"pll-ddr",
+		      0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk,	"dram-de-be0",	"pll-ddr",
+		      0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk,	"dram-de-be1",	"pll-ddr",
+		      0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk,	"dram-mp",	"pll-ddr",
+		      0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk,	"dram-ace",	"pll-ddr",
+		      0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+					   "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+				 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+				 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+				 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+				 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+				 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const tcon_parents[] = { "pll-video0", "pll-video1",
+					    "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", tcon_parents,
+			       0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", tcon_parents,
+			       0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+						"pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+				 csi_sclk_parents,
+				 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+			       0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+				  "tvd-sclk2", tvd_parents,
+				  0x128,
+				  0, 4,		/* M */
+				  16, 4,	/* P */
+				  8, 1,		/* mux */
+				  BIT(15),	/* gate */
+				  0);
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+			     0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+				 tcon_parents,
+				 0x12c, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+			     "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+			     0x12c, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+				 tcon_parents,
+				 0x130, 0, 4, 24, 2, BIT(31),
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+			     "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+			     0x130, 11, 1, BIT(15),
+			     CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+					   "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+				       csi_parents, csi_table,
+				       0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+				       csi_parents, csi_table,
+				       0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+				 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+					    "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+				 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other",
+						 "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+				 0x154, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+						 "pll-ddr-other", "pll-video1",
+						 "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+				       gpu_parents_sun7i, gpu_table_sun7i,
+				       0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+						  "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+				  0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+				  CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+				       hdmi1_parents, hdmi1_table,
+				       0x17c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+	{ .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f0,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-a",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+static struct ccu_mp out_b_clk = {
+	.enable		= BIT(31),
+	.m		= _SUNXI_CCU_DIV(8, 5),
+	.p		= _SUNXI_CCU_DIV(20, 2),
+	.mux		= {
+		.shift		= 24,
+		.width		= 2,
+		.fixed_predivs	= clk_out_predivs,
+		.n_predivs	= ARRAY_SIZE(clk_out_predivs),
+	},
+	.common		= {
+		.reg		= 0x1f4,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("out-b",
+						      out_parents,
+						      &ccu_mp_ops,
+						      0),
+	},
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+	&hosc_clk.common,
+	&pll_core_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_sun4i_clk.common,
+	&pll_ve_sun7i_clk.common,
+	&pll_ddr_base_clk.common,
+	&pll_ddr_clk.common,
+	&pll_ddr_other_clk.common,
+	&pll_periph_base_clk.common,
+	&pll_periph_sata_clk.common,
+	&pll_video1_clk.common,
+	&pll_gpu_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&axi_dram_clk.common,
+	&ahb_sun4i_clk.common,
+	&ahb_sun7i_clk.common,
+	&apb0_clk.common,
+	&apb1_clk.common,
+	&ahb_otg_clk.common,
+	&ahb_ehci0_clk.common,
+	&ahb_ohci0_clk.common,
+	&ahb_ehci1_clk.common,
+	&ahb_ohci1_clk.common,
+	&ahb_ss_clk.common,
+	&ahb_dma_clk.common,
+	&ahb_bist_clk.common,
+	&ahb_mmc0_clk.common,
+	&ahb_mmc1_clk.common,
+	&ahb_mmc2_clk.common,
+	&ahb_mmc3_clk.common,
+	&ahb_ms_clk.common,
+	&ahb_nand_clk.common,
+	&ahb_sdram_clk.common,
+	&ahb_ace_clk.common,
+	&ahb_emac_clk.common,
+	&ahb_ts_clk.common,
+	&ahb_spi0_clk.common,
+	&ahb_spi1_clk.common,
+	&ahb_spi2_clk.common,
+	&ahb_spi3_clk.common,
+	&ahb_pata_clk.common,
+	&ahb_sata_clk.common,
+	&ahb_gps_clk.common,
+	&ahb_hstimer_clk.common,
+	&ahb_ve_clk.common,
+	&ahb_tvd_clk.common,
+	&ahb_tve0_clk.common,
+	&ahb_tve1_clk.common,
+	&ahb_lcd0_clk.common,
+	&ahb_lcd1_clk.common,
+	&ahb_csi0_clk.common,
+	&ahb_csi1_clk.common,
+	&ahb_hdmi1_clk.common,
+	&ahb_hdmi0_clk.common,
+	&ahb_de_be0_clk.common,
+	&ahb_de_be1_clk.common,
+	&ahb_de_fe0_clk.common,
+	&ahb_de_fe1_clk.common,
+	&ahb_gmac_clk.common,
+	&ahb_mp_clk.common,
+	&ahb_gpu_clk.common,
+	&apb0_codec_clk.common,
+	&apb0_spdif_clk.common,
+	&apb0_ac97_clk.common,
+	&apb0_i2s0_clk.common,
+	&apb0_i2s1_clk.common,
+	&apb0_pio_clk.common,
+	&apb0_ir0_clk.common,
+	&apb0_ir1_clk.common,
+	&apb0_i2s2_clk.common,
+	&apb0_keypad_clk.common,
+	&apb1_i2c0_clk.common,
+	&apb1_i2c1_clk.common,
+	&apb1_i2c2_clk.common,
+	&apb1_i2c3_clk.common,
+	&apb1_can_clk.common,
+	&apb1_scr_clk.common,
+	&apb1_ps20_clk.common,
+	&apb1_ps21_clk.common,
+	&apb1_i2c4_clk.common,
+	&apb1_uart0_clk.common,
+	&apb1_uart1_clk.common,
+	&apb1_uart2_clk.common,
+	&apb1_uart3_clk.common,
+	&apb1_uart4_clk.common,
+	&apb1_uart5_clk.common,
+	&apb1_uart6_clk.common,
+	&apb1_uart7_clk.common,
+	&nand_clk.common,
+	&ms_clk.common,
+	&mmc0_clk.common,
+	&mmc0_output_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc1_clk.common,
+	&mmc1_output_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc2_clk.common,
+	&mmc2_output_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc3_clk.common,
+	&mmc3_output_clk.common,
+	&mmc3_sample_clk.common,
+	&ts_clk.common,
+	&ss_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&pata_clk.common,
+	&ir0_sun4i_clk.common,
+	&ir1_sun4i_clk.common,
+	&ir0_sun7i_clk.common,
+	&ir1_sun7i_clk.common,
+	&i2s0_clk.common,
+	&ac97_clk.common,
+	&spdif_clk.common,
+	&keypad_clk.common,
+	&sata_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy_clk.common,
+	&spi3_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi0_clk.common,
+	&dram_csi1_clk.common,
+	&dram_ts_clk.common,
+	&dram_tvd_clk.common,
+	&dram_tve0_clk.common,
+	&dram_tve1_clk.common,
+	&dram_out_clk.common,
+	&dram_de_fe1_clk.common,
+	&dram_de_fe0_clk.common,
+	&dram_de_be0_clk.common,
+	&dram_de_be1_clk.common,
+	&dram_mp_clk.common,
+	&dram_ace_clk.common,
+	&de_be0_clk.common,
+	&de_be1_clk.common,
+	&de_fe0_clk.common,
+	&de_fe1_clk.common,
+	&de_mp_clk.common,
+	&tcon0_ch0_clk.common,
+	&tcon1_ch0_clk.common,
+	&csi_sclk_clk.common,
+	&tvd_sun4i_clk.common,
+	&tvd_sclk1_sun7i_clk.common,
+	&tvd_sclk2_sun7i_clk.common,
+	&tcon0_ch1_sclk2_clk.common,
+	&tcon0_ch1_clk.common,
+	&tcon1_ch1_sclk2_clk.common,
+	&tcon1_ch1_clk.common,
+	&csi0_clk.common,
+	&csi1_clk.common,
+	&ve_clk.common,
+	&codec_clk.common,
+	&avs_clk.common,
+	&ace_clk.common,
+	&hdmi_clk.common,
+	&gpu_sun4i_clk.common,
+	&gpu_sun7i_clk.common,
+	&mbus_sun4i_clk.common,
+	&mbus_sun7i_clk.common,
+	&hdmi1_slow_clk.common,
+	&hdmi1_clk.common,
+	&out_a_clk.common,
+	&out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+			"pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+			"pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun4i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AXI_DRAM]		= &axi_dram_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun4i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_GPS]		= &ahb_gps_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun4i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun4i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD]		= &tvd_sun4i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun4i_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+	.hws	= {
+		[CLK_HOSC]		= &hosc_clk.common.hw,
+		[CLK_PLL_CORE]		= &pll_core_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_sun7i_clk.common.hw,
+		[CLK_PLL_DDR_BASE]	= &pll_ddr_base_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_DDR_OTHER]	= &pll_ddr_other_clk.common.hw,
+		[CLK_PLL_PERIPH_BASE]	= &pll_periph_base_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.hw,
+		[CLK_PLL_PERIPH_SATA]	= &pll_periph_sata_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB]		= &ahb_sun7i_clk.common.hw,
+		[CLK_APB0]		= &apb0_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_AHB_OTG]		= &ahb_otg_clk.common.hw,
+		[CLK_AHB_EHCI0]		= &ahb_ehci0_clk.common.hw,
+		[CLK_AHB_OHCI0]		= &ahb_ohci0_clk.common.hw,
+		[CLK_AHB_EHCI1]		= &ahb_ehci1_clk.common.hw,
+		[CLK_AHB_OHCI1]		= &ahb_ohci1_clk.common.hw,
+		[CLK_AHB_SS]		= &ahb_ss_clk.common.hw,
+		[CLK_AHB_DMA]		= &ahb_dma_clk.common.hw,
+		[CLK_AHB_BIST]		= &ahb_bist_clk.common.hw,
+		[CLK_AHB_MMC0]		= &ahb_mmc0_clk.common.hw,
+		[CLK_AHB_MMC1]		= &ahb_mmc1_clk.common.hw,
+		[CLK_AHB_MMC2]		= &ahb_mmc2_clk.common.hw,
+		[CLK_AHB_MMC3]		= &ahb_mmc3_clk.common.hw,
+		[CLK_AHB_MS]		= &ahb_ms_clk.common.hw,
+		[CLK_AHB_NAND]		= &ahb_nand_clk.common.hw,
+		[CLK_AHB_SDRAM]		= &ahb_sdram_clk.common.hw,
+		[CLK_AHB_ACE]		= &ahb_ace_clk.common.hw,
+		[CLK_AHB_EMAC]		= &ahb_emac_clk.common.hw,
+		[CLK_AHB_TS]		= &ahb_ts_clk.common.hw,
+		[CLK_AHB_SPI0]		= &ahb_spi0_clk.common.hw,
+		[CLK_AHB_SPI1]		= &ahb_spi1_clk.common.hw,
+		[CLK_AHB_SPI2]		= &ahb_spi2_clk.common.hw,
+		[CLK_AHB_SPI3]		= &ahb_spi3_clk.common.hw,
+		[CLK_AHB_PATA]		= &ahb_pata_clk.common.hw,
+		[CLK_AHB_SATA]		= &ahb_sata_clk.common.hw,
+		[CLK_AHB_HSTIMER]	= &ahb_hstimer_clk.common.hw,
+		[CLK_AHB_VE]		= &ahb_ve_clk.common.hw,
+		[CLK_AHB_TVD]		= &ahb_tvd_clk.common.hw,
+		[CLK_AHB_TVE0]		= &ahb_tve0_clk.common.hw,
+		[CLK_AHB_TVE1]		= &ahb_tve1_clk.common.hw,
+		[CLK_AHB_LCD0]		= &ahb_lcd0_clk.common.hw,
+		[CLK_AHB_LCD1]		= &ahb_lcd1_clk.common.hw,
+		[CLK_AHB_CSI0]		= &ahb_csi0_clk.common.hw,
+		[CLK_AHB_CSI1]		= &ahb_csi1_clk.common.hw,
+		[CLK_AHB_HDMI1]		= &ahb_hdmi1_clk.common.hw,
+		[CLK_AHB_HDMI0]		= &ahb_hdmi0_clk.common.hw,
+		[CLK_AHB_DE_BE0]	= &ahb_de_be0_clk.common.hw,
+		[CLK_AHB_DE_BE1]	= &ahb_de_be1_clk.common.hw,
+		[CLK_AHB_DE_FE0]	= &ahb_de_fe0_clk.common.hw,
+		[CLK_AHB_DE_FE1]	= &ahb_de_fe1_clk.common.hw,
+		[CLK_AHB_GMAC]		= &ahb_gmac_clk.common.hw,
+		[CLK_AHB_MP]		= &ahb_mp_clk.common.hw,
+		[CLK_AHB_GPU]		= &ahb_gpu_clk.common.hw,
+		[CLK_APB0_CODEC]	= &apb0_codec_clk.common.hw,
+		[CLK_APB0_SPDIF]	= &apb0_spdif_clk.common.hw,
+		[CLK_APB0_AC97]		= &apb0_ac97_clk.common.hw,
+		[CLK_APB0_I2S0]		= &apb0_i2s0_clk.common.hw,
+		[CLK_APB0_I2S1]		= &apb0_i2s1_clk.common.hw,
+		[CLK_APB0_PIO]		= &apb0_pio_clk.common.hw,
+		[CLK_APB0_IR0]		= &apb0_ir0_clk.common.hw,
+		[CLK_APB0_IR1]		= &apb0_ir1_clk.common.hw,
+		[CLK_APB0_I2S2]		= &apb0_i2s2_clk.common.hw,
+		[CLK_APB0_KEYPAD]	= &apb0_keypad_clk.common.hw,
+		[CLK_APB1_I2C0]		= &apb1_i2c0_clk.common.hw,
+		[CLK_APB1_I2C1]		= &apb1_i2c1_clk.common.hw,
+		[CLK_APB1_I2C2]		= &apb1_i2c2_clk.common.hw,
+		[CLK_APB1_I2C3]		= &apb1_i2c3_clk.common.hw,
+		[CLK_APB1_CAN]		= &apb1_can_clk.common.hw,
+		[CLK_APB1_SCR]		= &apb1_scr_clk.common.hw,
+		[CLK_APB1_PS20]		= &apb1_ps20_clk.common.hw,
+		[CLK_APB1_PS21]		= &apb1_ps21_clk.common.hw,
+		[CLK_APB1_I2C4]		= &apb1_i2c4_clk.common.hw,
+		[CLK_APB1_UART0]	= &apb1_uart0_clk.common.hw,
+		[CLK_APB1_UART1]	= &apb1_uart1_clk.common.hw,
+		[CLK_APB1_UART2]	= &apb1_uart2_clk.common.hw,
+		[CLK_APB1_UART3]	= &apb1_uart3_clk.common.hw,
+		[CLK_APB1_UART4]	= &apb1_uart4_clk.common.hw,
+		[CLK_APB1_UART5]	= &apb1_uart5_clk.common.hw,
+		[CLK_APB1_UART6]	= &apb1_uart6_clk.common.hw,
+		[CLK_APB1_UART7]	= &apb1_uart7_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MS]		= &ms_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_MMC3_OUTPUT]	= &mmc3_output_clk.common.hw,
+		[CLK_MMC3_SAMPLE]	= &mmc3_sample_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_PATA]		= &pata_clk.common.hw,
+		[CLK_IR0]		= &ir0_sun7i_clk.common.hw,
+		[CLK_IR1]		= &ir1_sun7i_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY]		= &usb_phy_clk.common.hw,
+		/* CLK_GPS is unimplemented */
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_TVE0]		= &dram_tve0_clk.common.hw,
+		[CLK_DRAM_TVE1]		= &dram_tve1_clk.common.hw,
+		[CLK_DRAM_OUT]		= &dram_out_clk.common.hw,
+		[CLK_DRAM_DE_FE1]	= &dram_de_fe1_clk.common.hw,
+		[CLK_DRAM_DE_FE0]	= &dram_de_fe0_clk.common.hw,
+		[CLK_DRAM_DE_BE0]	= &dram_de_be0_clk.common.hw,
+		[CLK_DRAM_DE_BE1]	= &dram_de_be1_clk.common.hw,
+		[CLK_DRAM_MP]		= &dram_mp_clk.common.hw,
+		[CLK_DRAM_ACE]		= &dram_ace_clk.common.hw,
+		[CLK_DE_BE0]		= &de_be0_clk.common.hw,
+		[CLK_DE_BE1]		= &de_be1_clk.common.hw,
+		[CLK_DE_FE0]		= &de_fe0_clk.common.hw,
+		[CLK_DE_FE1]		= &de_fe1_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0_CH0]		= &tcon0_ch0_clk.common.hw,
+		[CLK_TCON1_CH0]		= &tcon1_ch0_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_TVD_SCLK2]		= &tvd_sclk2_sun7i_clk.common.hw,
+		[CLK_TVD]		= &tvd_sclk1_sun7i_clk.common.hw,
+		[CLK_TCON0_CH1_SCLK2]	= &tcon0_ch1_sclk2_clk.common.hw,
+		[CLK_TCON0_CH1]		= &tcon0_ch1_clk.common.hw,
+		[CLK_TCON1_CH1_SCLK2]	= &tcon1_ch1_sclk2_clk.common.hw,
+		[CLK_TCON1_CH1]		= &tcon1_ch1_clk.common.hw,
+		[CLK_CSI0]		= &csi0_clk.common.hw,
+		[CLK_CSI1]		= &csi1_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_CODEC]		= &codec_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_GPU]		= &gpu_sun7i_clk.common.hw,
+		[CLK_MBUS]		= &mbus_sun7i_clk.common.hw,
+		[CLK_HDMI1_SLOW]	= &hdmi1_slow_clk.common.hw,
+		[CLK_HDMI1]		= &hdmi1_clk.common.hw,
+		[CLK_OUT_A]		= &out_a_clk.common.hw,
+		[CLK_OUT_B]		= &out_b_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
+	[RST_GPS]		= { 0x0d0, BIT(0) },
+	[RST_DE_BE0]		= { 0x104, BIT(30) },
+	[RST_DE_BE1]		= { 0x108, BIT(30) },
+	[RST_DE_FE0]		= { 0x10c, BIT(30) },
+	[RST_DE_FE1]		= { 0x110, BIT(30) },
+	[RST_DE_MP]		= { 0x114, BIT(30) },
+	[RST_TCON0]		= { 0x118, BIT(30) },
+	[RST_TCON1]		= { 0x11c, BIT(30) },
+	[RST_CSI0]		= { 0x134, BIT(30) },
+	[RST_CSI1]		= { 0x138, BIT(30) },
+	[RST_VE]		= { 0x13c, BIT(0) },
+	[RST_ACE]		= { 0x148, BIT(16) },
+	[RST_LVDS]		= { 0x14c, BIT(0) },
+	[RST_GPU]		= { 0x154, BIT(30) },
+	[RST_HDMI_H]		= { 0x170, BIT(0) },
+	[RST_HDMI_SYS]		= { 0x170, BIT(1) },
+	[RST_HDMI_AUDIO_DMA]	= { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun4i_a10_hw_clks,
+
+	.resets		= sun7i_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+	.ccu_clks	= sun4i_sun7i_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+	.hw_clks	= &sun7i_a20_hw_clks,
+
+	.resets		= sun7i_a20_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+				  const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN4I_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+	/*
+	 * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+	 * AXI which have rate changes due to cpufreq.
+	 *
+	 * This is especially a big deal for the HS timer whose parent
+	 * clock is AHB.
+	 */
+	val = readl(reg + SUN4I_AHB_REG);
+	val &= ~GENMASK(7, 6);
+	writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+	       sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+	sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+	       sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 0000000..c5947c7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,61 @@ 
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE		2
+#define CLK_PLL_AUDIO_BASE	3
+#define CLK_PLL_AUDIO		4
+#define CLK_PLL_AUDIO_2X	5
+#define CLK_PLL_AUDIO_4X	6
+#define CLK_PLL_AUDIO_8X	7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VE		10
+#define CLK_PLL_DDR_BASE	11
+#define CLK_PLL_DDR		12
+#define CLK_PLL_DDR_OTHER	13
+#define CLK_PLL_PERIPH_BASE	14
+#define CLK_PLL_PERIPH		15
+#define CLK_PLL_PERIPH_SATA	16
+#define CLK_PLL_VIDEO1		17
+#define CLK_PLL_VIDEO1_2X	18
+#define CLK_PLL_GPU		19
+
+/* The CPU clock is exported */
+#define CLK_AXI			21
+#define CLK_AXI_DRAM		22
+#define CLK_AHB			23
+#define CLK_APB0		24
+#define CLK_APB1		25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I	(CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I	(CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 0000000..c5a53f3
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,200 @@ 
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN4I_A10_H_
+#define _DT_BINDINGS_CLK_SUN4I_A10_H_
+
+#define CLK_HOSC		1
+#define CLK_CPU			20
+
+/* AHB Gates */
+#define CLK_AHB_OTG		26
+#define CLK_AHB_EHCI0		27
+#define CLK_AHB_OHCI0		28
+#define CLK_AHB_EHCI1		29
+#define CLK_AHB_OHCI1		30
+#define CLK_AHB_SS		31
+#define CLK_AHB_DMA		32
+#define CLK_AHB_BIST		33
+#define CLK_AHB_MMC0		34
+#define CLK_AHB_MMC1		35
+#define CLK_AHB_MMC2		36
+#define CLK_AHB_MMC3		37
+#define CLK_AHB_MS		38
+#define CLK_AHB_NAND		39
+#define CLK_AHB_SDRAM		40
+#define CLK_AHB_ACE		41
+#define CLK_AHB_EMAC		42
+#define CLK_AHB_TS		43
+#define CLK_AHB_SPI0		44
+#define CLK_AHB_SPI1		45
+#define CLK_AHB_SPI2		46
+#define CLK_AHB_SPI3		47
+#define CLK_AHB_PATA		48
+#define CLK_AHB_SATA		49
+#define CLK_AHB_GPS		50
+#define CLK_AHB_HSTIMER		51
+#define CLK_AHB_VE		52
+#define CLK_AHB_TVD		53
+#define CLK_AHB_TVE0		54
+#define CLK_AHB_TVE1		55
+#define CLK_AHB_LCD0		56
+#define CLK_AHB_LCD1		57
+#define CLK_AHB_CSI0		58
+#define CLK_AHB_CSI1		59
+#define CLK_AHB_HDMI0		60
+#define CLK_AHB_HDMI1		61
+#define CLK_AHB_DE_BE0		62
+#define CLK_AHB_DE_BE1		63
+#define CLK_AHB_DE_FE0		64
+#define CLK_AHB_DE_FE1		65
+#define CLK_AHB_GMAC		66
+#define CLK_AHB_MP		67
+#define CLK_AHB_GPU		68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC		69
+#define CLK_APB0_SPDIF		70
+#define CLK_APB0_I2S0		71
+#define CLK_APB0_AC97		72
+#define CLK_APB0_I2S1		73
+#define CLK_APB0_PIO		74
+#define CLK_APB0_IR0		75
+#define CLK_APB0_IR1		76
+#define CLK_APB0_I2S2		77
+#define CLK_APB0_KEYPAD		78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0		79
+#define CLK_APB1_I2C1		80
+#define CLK_APB1_I2C2		81
+#define CLK_APB1_I2C3		82
+#define CLK_APB1_CAN		83
+#define CLK_APB1_SCR		84
+#define CLK_APB1_PS20		85
+#define CLK_APB1_PS21		86
+#define CLK_APB1_I2C4		87
+#define CLK_APB1_UART0		88
+#define CLK_APB1_UART1		89
+#define CLK_APB1_UART2		90
+#define CLK_APB1_UART3		91
+#define CLK_APB1_UART4		92
+#define CLK_APB1_UART5		93
+#define CLK_APB1_UART6		94
+#define CLK_APB1_UART7		95
+
+/* IP clocks */
+#define CLK_NAND		96
+#define CLK_MS			97
+#define CLK_MMC0		98
+#define CLK_MMC0_OUTPUT		99
+#define CLK_MMC0_SAMPLE		100
+#define CLK_MMC1		101
+#define CLK_MMC1_OUTPUT		102
+#define CLK_MMC1_SAMPLE		103
+#define CLK_MMC2		104
+#define CLK_MMC2_OUTPUT		105
+#define CLK_MMC2_SAMPLE		106
+#define CLK_MMC3		107
+#define CLK_MMC3_OUTPUT		108
+#define CLK_MMC3_SAMPLE		109
+#define CLK_TS			110
+#define CLK_SS			111
+#define CLK_SPI0		112
+#define CLK_SPI1		113
+#define CLK_SPI2		114
+#define CLK_PATA		115
+#define CLK_IR0			116
+#define CLK_IR1			117
+#define CLK_I2S0		118
+#define CLK_AC97		119
+#define CLK_SPDIF		120
+#define CLK_KEYPAD		121
+#define CLK_SATA		122
+#define CLK_USB_OHCI0		123
+#define CLK_USB_OHCI1		124
+#define CLK_USB_PHY		125
+#define CLK_GPS			126
+#define CLK_SPI3		127
+#define CLK_I2S1		128
+#define CLK_I2S2		129
+
+/* DRAM Gates */
+#define CLK_DRAM_VE		130
+#define CLK_DRAM_CSI0		131
+#define CLK_DRAM_CSI1		132
+#define CLK_DRAM_TS		133
+#define CLK_DRAM_TVD		134
+#define CLK_DRAM_TVE0		135
+#define CLK_DRAM_TVE1		136
+#define CLK_DRAM_OUT		137
+#define CLK_DRAM_DE_FE1		138
+#define CLK_DRAM_DE_FE0		139
+#define CLK_DRAM_DE_BE0		140
+#define CLK_DRAM_DE_BE1		141
+#define CLK_DRAM_MP		142
+#define CLK_DRAM_ACE		143
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0		144
+#define CLK_DE_BE1		145
+#define CLK_DE_FE0		146
+#define CLK_DE_FE1		147
+#define CLK_DE_MP		148
+#define CLK_TCON0_CH0		149
+#define CLK_TCON1_CH0		150
+#define CLK_CSI_SCLK		151
+#define CLK_TVD_SCLK2		152
+#define CLK_TVD			153
+#define CLK_TCON0_CH1_SCLK2	154
+#define CLK_TCON0_CH1		155
+#define CLK_TCON1_CH1_SCLK2	156
+#define CLK_TCON1_CH1		157
+#define CLK_CSI0		158
+#define CLK_CSI1		159
+#define CLK_CODEC		160
+#define CLK_VE			161
+#define CLK_AVS			162
+#define CLK_ACE			163
+#define CLK_HDMI		164
+#define CLK_GPU			165
+
+#endif /* _DT_BINDINGS_CLK_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun7i-a20-ccu.h b/include/dt-bindings/clock/sun7i-a20-ccu.h
new file mode 100644
index 0000000..045a517
--- /dev/null
+++ b/include/dt-bindings/clock/sun7i-a20-ccu.h
@@ -0,0 +1,53 @@ 
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN7I_A20_H_
+#define _DT_BINDINGS_CLK_SUN7I_A20_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+
+#define CLK_MBUS		166
+#define CLK_HDMI1_SLOW		167
+#define CLK_HDMI1		168
+#define CLK_OUT_A		169
+#define CLK_OUT_B		170
+
+#endif /* _DT_BINDINGS_CLK_SUN7I_A20_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 0000000..e6f6b6e
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,67 @@ 
+/*
+ * Copyright (C) 2017 Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define	RST_USB_PHY0		1
+#define	RST_USB_PHY1		2
+#define	RST_USB_PHY2		3
+#define	RST_GPS			4
+#define	RST_DE_BE0		5
+#define	RST_DE_BE1		6
+#define	RST_DE_FE0		7
+#define	RST_DE_FE1		8
+#define	RST_DE_MP		9
+#define	RST_TCON0		10
+#define	RST_TCON1		11
+#define	RST_CSI0		12
+#define	RST_CSI1		13
+#define	RST_VE			14
+#define	RST_ACE			15
+#define	RST_LVDS		16
+#define	RST_GPU			17
+#define	RST_HDMI_H		18
+#define	RST_HDMI_SYS		19
+#define	RST_HDMI_AUDIO_DMA	20
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */