| Message ID | 1498529470-20652-3-git-send-email-hoegeun.kwon@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Andrzej, Could you please check this patch? Best regards, Hoegeun On 06/27/2017 11:11 AM, Hoegeun Kwon wrote: > This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver > which uses mipi_dsi bus to communicate with panel. The panel has > 320×320 resolution in 1.63" physical panel. This panel is used in > Samsung Galaxy Gear 2. > > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > drivers/gpu/drm/panel/Kconfig | 7 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 540 +++++++++++++++++++++++ > 3 files changed, 548 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 3e29a99..3f4afde 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -68,6 +68,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2 > depends on DRM_MIPI_DSI > select VIDEOMODE_HELPERS > > +config DRM_PANEL_SAMSUNG_S6E63J0X03 > + tristate "Samsung S6E63J0X03 DSI command mode panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + select VIDEOMODE_HELPERS > + > config DRM_PANEL_SAMSUNG_S6E8AA0 > tristate "Samsung S6E8AA0 DSI video mode panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 292b3c7..f028269 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o > obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o > +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o > obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o > diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > new file mode 100644 > index 0000000..c3d1b5d > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > @@ -0,0 +1,540 @@ > +/* > + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver. > + * > + * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd > + * > + * Inki Dae <inki.dae@samsung.com> > + * Hoegeun Kwon <hoegeun.kwon@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <drm/drmP.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_panel.h> > +#include <linux/backlight.h> > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/consumer.h> > +#include <video/mipi_display.h> > + > +#define MCS_LEVEL2_KEY 0xf0 > +#define MCS_MTP_KEY 0xf1 > +#define MCS_MTP_SET3 0xd4 > + > +#define MAX_BRIGHTNESS 100 > +#define DEFAULT_BRIGHTNESS 80 > + > +#define NUM_GAMMA_STEPS 9 > +#define GAMMA_CMD_CNT 28 > + > +#define FIRST_COLUMN 20 > + > +struct s6e63j0x03 { > + struct device *dev; > + struct drm_panel panel; > + struct backlight_device *bl_dev; > + > + struct regulator_bulk_data supplies[2]; > + struct gpio_desc *reset_gpio; > +}; > + > +static const struct drm_display_mode default_mode = { > + .clock = 4649, > + .hdisplay = 320, > + .hsync_start = 320 + 1, > + .hsync_end = 320 + 1 + 1, > + .htotal = 320 + 1 + 1 + 1, > + .vdisplay = 320, > + .vsync_start = 320 + 150, > + .vsync_end = 320 + 150 + 1, > + .vtotal = 320 + 150 + 1 + 2, > + .vrefresh = 30, > + .flags = 0, > +}; > + > +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = { > + { /* Gamma 10 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26, > + 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36, > + 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf > + }, > + { /* gamma 30 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26, > + 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34, > + 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc > + }, > + { /* gamma 60 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a, > + 0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33, > + 0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5 > + }, > + { /* gamma 90 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29, > + 0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31, > + 0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09 > + }, > + { /* gamma 120 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28, > + 0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31, > + 0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b > + }, > + { /* gamma 150 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28, > + 0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31, > + 0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29 > + }, > + { /* gamma 200 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29, > + 0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30, > + 0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b > + }, > + { /* gamma 240 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a, > + 0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30, > + 0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47 > + }, > + { /* gamma 300 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28, > + 0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f, > + 0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57 > + } > +}; > + > +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel) > +{ > + return container_of(panel, struct s6e63j0x03, panel); > +} > + > +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx, > + const void *seq, size_t len) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + > + return mipi_dsi_dcs_write_buffer(dsi, seq, len); > +} > + > +#define s6e63j0x03_dcs_write_seq_static(ret, ctx, seq...) \ > + do { \ > + static const u8 d[] = { seq }; \ > + ret = s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ > + } while (0) > + > +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) > +{ > + int ret; > + > + s6e63j0x03_dcs_write_seq_static(ret, ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); > + return ret; > +} > + > +static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on) > +{ > + int ret; > + > + if (on) > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MCS_MTP_KEY, 0x5a, 0x5a); > + else > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MCS_MTP_KEY, 0xa5, 0xa5); > + > + return ret; > +} > + > +static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx) > +{ > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + if (ret < 0) > + return ret; > + > + msleep(30); > + > + gpiod_set_value(ctx->reset_gpio, 1); > + usleep_range(1000, 2000); > + gpiod_set_value(ctx->reset_gpio, 0); > + usleep_range(5000, 6000); > + > + return 0; > +} > + > +static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx) > +{ > + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > +} > + > +static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness) > +{ > + unsigned int index; > + > + index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS); > + > + if (index >= NUM_GAMMA_STEPS) > + index = NUM_GAMMA_STEPS - 1; > + > + return index; > +} > + > +static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx, > + unsigned int brightness) > +{ > + struct backlight_device *bl_dev = ctx->bl_dev; > + unsigned int index = s6e63j0x03_get_brightness_index(brightness); > + int ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_dcs_write_seq(ctx, gamma_tbl[index], GAMMA_CMD_CNT); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + bl_dev->props.brightness = brightness; > + > + return 0; > +} > + > +static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev) > +{ > + struct s6e63j0x03 *ctx = bl_get_data(bl_dev); > + unsigned int brightness = bl_dev->props.brightness; > + > + return s6e63j0x03_update_gamma(ctx, brightness); > +} > + > +static const struct backlight_ops s6e63j0x03_bl_ops = { > + .update_status = s6e63j0x03_set_brightness, > +}; > + > +static int s6e63j0x03_disable(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_NORMAL; > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + msleep(120); > + > + return 0; > +} > + > +static int s6e63j0x03_unprepare(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + int ret; > + > + ret = s6e63j0x03_power_off(ctx); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; > + > + return 0; > +} > + > +static int s6e63j0x03_panel_init(struct s6e63j0x03 *ctx) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + ret = s6e63j0x03_enable_lv2_command(ctx); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + /* set porch adjustment */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf2, 0x1c, 0x28); > + if (ret < 0) > + return ret; > + > + /* set frame freq */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb5, 0x00, 0x02, 0x00); > + if (ret < 0) > + return ret; > + > + /* set caset, paset */ > + ret = mipi_dsi_dcs_set_column_address(dsi, FIRST_COLUMN, > + default_mode.hdisplay - 1 + FIRST_COLUMN); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1); > + if (ret < 0) > + return ret; > + > + /* set ltps timming 0, 1 */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf8, 0x08, 0x08, 0x08, 0x17, > + 0x00, 0x2a, 0x02, 0x26, 0x00, 0x00, 0x02, 0x00, 0x00); > + if (ret < 0) > + return ret; > + > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf7, 0x02); > + if (ret < 0) > + return ret; > + > + /* set param pos te_edge */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x01); > + if (ret < 0) > + return ret; > + > + /* set te rising edge */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xe2, 0x0f); > + if (ret < 0) > + return ret; > + > + /* set param pos default */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x00); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int s6e63j0x03_prepare(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + int ret; > + > + ret = s6e63j0x03_power_on(ctx); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_panel_init(ctx); > + if (ret < 0) > + goto err; > + > + ctx->bl_dev->props.power = FB_BLANK_NORMAL; > + > + return 0; > + > +err: > + s6e63j0x03_power_off(ctx); > + return ret; > +} > + > +static int s6e63j0x03_enable(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + msleep(120); > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + /* set elvss_cond */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb1, 0x00, 0x09); > + if (ret < 0) > + return ret; > + > + /* set pos */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_SET_ADDRESS_MODE, 0x40); > + if (ret < 0) > + return ret; > + > + /* set default white brightness */ > + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff); > + if (ret < 0) > + return ret; > + > + /* set whilte ctrl */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); > + if (ret < 0) > + return ret; > + > + /* set acl off */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_WRITE_POWER_SAVE, 0x00); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_UNBLANK; > + > + return 0; > +} > + > +static int s6e63j0x03_get_modes(struct drm_panel *panel) > +{ > + struct drm_connector *connector = panel->connector; > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(panel->drm, &default_mode); > + if (!mode) { > + DRM_ERROR("failed to add mode %ux%ux@%u\n", > + default_mode.hdisplay, default_mode.vdisplay, > + default_mode.vrefresh); > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + drm_mode_probed_add(connector, mode); > + > + connector->display_info.width_mm = 29; > + connector->display_info.height_mm = 29; > + > + return 1; > +} > + > +static const struct drm_panel_funcs s6e63j0x03_funcs = { > + .disable = s6e63j0x03_disable, > + .unprepare = s6e63j0x03_unprepare, > + .prepare = s6e63j0x03_prepare, > + .enable = s6e63j0x03_enable, > + .get_modes = s6e63j0x03_get_modes, > +}; > + > +static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + struct s6e63j0x03 *ctx; > + int ret; > + > + ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + mipi_dsi_set_drvdata(dsi, ctx); > + > + ctx->dev = dev; > + > + dsi->lanes = 1; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET; > + > + ctx->supplies[0].supply = "vdd3"; > + ctx->supplies[1].supply = "vci"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) { > + dev_err(dev, "failed to get regulators: %d\n", ret); > + return ret; > + } > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset_gpio)) { > + dev_err(dev, "cannot get reset-gpio: %ld\n", > + PTR_ERR(ctx->reset_gpio)); > + return PTR_ERR(ctx->reset_gpio); > + } > + > + drm_panel_init(&ctx->panel); > + ctx->panel.dev = dev; > + ctx->panel.funcs = &s6e63j0x03_funcs; > + > + ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx, > + &s6e63j0x03_bl_ops, NULL); > + if (IS_ERR(ctx->bl_dev)) { > + dev_err(dev, "failed to register backlight device\n"); > + return PTR_ERR(ctx->bl_dev); > + } > + > + ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS; > + ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS; > + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; > + > + ret = drm_panel_add(&ctx->panel); > + if (ret < 0) > + goto unregister_backlight; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) > + goto remove_panel; > + > + return ret; > + > +remove_panel: > + drm_panel_remove(&ctx->panel); > + > +unregister_backlight: > + backlight_device_unregister(ctx->bl_dev); > + > + return ret; > +} > + > +static int s6e63j0x03_remove(struct mipi_dsi_device *dsi) > +{ > + struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi); > + > + mipi_dsi_detach(dsi); > + drm_panel_remove(&ctx->panel); > + > + backlight_device_unregister(ctx->bl_dev); > + > + return 0; > +} > + > +static const struct of_device_id s6e63j0x03_of_match[] = { > + { .compatible = "samsung,s6e63j0x03" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match); > + > +static struct mipi_dsi_driver s6e63j0x03_driver = { > + .probe = s6e63j0x03_probe, > + .remove = s6e63j0x03_remove, > + .driver = { > + .name = "panel_samsung_s6e63j0x03", > + .of_match_table = s6e63j0x03_of_match, > + }, > +}; > +module_mipi_dsi_driver(s6e63j0x03_driver); > + > +MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>"); > +MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>"); > +MODULE_DESCRIPTION("MIPI-DSI based s6e63j0x03 AMOLED LCD Panel Driver"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 27.06.2017 04:11, Hoegeun Kwon wrote: > This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver > which uses mipi_dsi bus to communicate with panel. The panel has > 320×320 resolution in 1.63" physical panel. This panel is used in > Samsung Galaxy Gear 2. > > Signed-off-by: Inki Dae <inki.dae@samsung.com> > Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> > Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> > --- > drivers/gpu/drm/panel/Kconfig | 7 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 540 +++++++++++++++++++++++ > 3 files changed, 548 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 3e29a99..3f4afde 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -68,6 +68,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2 > depends on DRM_MIPI_DSI > select VIDEOMODE_HELPERS > > +config DRM_PANEL_SAMSUNG_S6E63J0X03 > + tristate "Samsung S6E63J0X03 DSI command mode panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + select VIDEOMODE_HELPERS > + > config DRM_PANEL_SAMSUNG_S6E8AA0 > tristate "Samsung S6E8AA0 DSI video mode panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 292b3c7..f028269 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o > obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o > +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o > obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o > diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > new file mode 100644 > index 0000000..c3d1b5d > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c > @@ -0,0 +1,540 @@ > +/* > + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver. > + * > + * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd > + * > + * Inki Dae <inki.dae@samsung.com> > + * Hoegeun Kwon <hoegeun.kwon@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <drm/drmP.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_panel.h> > +#include <linux/backlight.h> > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/consumer.h> > +#include <video/mipi_display.h> > + > +#define MCS_LEVEL2_KEY 0xf0 > +#define MCS_MTP_KEY 0xf1 > +#define MCS_MTP_SET3 0xd4 > + > +#define MAX_BRIGHTNESS 100 > +#define DEFAULT_BRIGHTNESS 80 > + > +#define NUM_GAMMA_STEPS 9 > +#define GAMMA_CMD_CNT 28 > + > +#define FIRST_COLUMN 20 > + > +struct s6e63j0x03 { > + struct device *dev; > + struct drm_panel panel; > + struct backlight_device *bl_dev; > + > + struct regulator_bulk_data supplies[2]; > + struct gpio_desc *reset_gpio; > +}; > + > +static const struct drm_display_mode default_mode = { > + .clock = 4649, > + .hdisplay = 320, > + .hsync_start = 320 + 1, > + .hsync_end = 320 + 1 + 1, > + .htotal = 320 + 1 + 1 + 1, > + .vdisplay = 320, > + .vsync_start = 320 + 150, > + .vsync_end = 320 + 150 + 1, > + .vtotal = 320 + 150 + 1 + 2, > + .vrefresh = 30, > + .flags = 0, > +}; > + > +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = { > + { /* Gamma 10 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26, > + 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36, > + 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf > + }, > + { /* gamma 30 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26, > + 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34, > + 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc > + }, > + { /* gamma 60 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a, > + 0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33, > + 0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5 > + }, > + { /* gamma 90 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29, > + 0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31, > + 0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09 > + }, > + { /* gamma 120 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28, > + 0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31, > + 0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b > + }, > + { /* gamma 150 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28, > + 0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31, > + 0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29 > + }, > + { /* gamma 200 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29, > + 0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30, > + 0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b > + }, > + { /* gamma 240 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a, > + 0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30, > + 0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47 > + }, > + { /* gamma 300 */ > + MCS_MTP_SET3, > + 0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28, > + 0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f, > + 0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57 > + } > +}; > + > +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel) > +{ > + return container_of(panel, struct s6e63j0x03, panel); > +} > + > +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx, > + const void *seq, size_t len) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + > + return mipi_dsi_dcs_write_buffer(dsi, seq, len); > +} > + > +#define s6e63j0x03_dcs_write_seq_static(ret, ctx, seq...) \ > + do { \ > + static const u8 d[] = { seq }; \ > + ret = s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ > + } while (0) I think better would be to use statement expression here [1]: #define s6e63j0x03_dcs_write_seq_static(ctx, seq...) \ ({ \ static const u8 d[] = { seq }; \ s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ }) This way instead of passing ret by reference you can use return value. [1]: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html > + > +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) > +{ > + int ret; > + > + s6e63j0x03_dcs_write_seq_static(ret, ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); > + return ret; > +} With the construct above this function can be simplified to: +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) +{ + s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); +} Similarly other functions. > + > +static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on) > +{ > + int ret; > + > + if (on) > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MCS_MTP_KEY, 0x5a, 0x5a); > + else > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MCS_MTP_KEY, 0xa5, 0xa5); > + > + return ret; > +} > + > +static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx) > +{ > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > + if (ret < 0) > + return ret; > + > + msleep(30); > + > + gpiod_set_value(ctx->reset_gpio, 1); > + usleep_range(1000, 2000); > + gpiod_set_value(ctx->reset_gpio, 0); > + usleep_range(5000, 6000); > + > + return 0; > +} > + > +static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx) > +{ > + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); > +} > + > +static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness) > +{ > + unsigned int index; > + > + index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS); > + > + if (index >= NUM_GAMMA_STEPS) > + index = NUM_GAMMA_STEPS - 1; > + > + return index; > +} > + > +static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx, > + unsigned int brightness) > +{ > + struct backlight_device *bl_dev = ctx->bl_dev; > + unsigned int index = s6e63j0x03_get_brightness_index(brightness); > + int ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_dcs_write_seq(ctx, gamma_tbl[index], GAMMA_CMD_CNT); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + bl_dev->props.brightness = brightness; > + > + return 0; > +} > + > +static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev) > +{ > + struct s6e63j0x03 *ctx = bl_get_data(bl_dev); > + unsigned int brightness = bl_dev->props.brightness; > + > + return s6e63j0x03_update_gamma(ctx, brightness); > +} > + > +static const struct backlight_ops s6e63j0x03_bl_ops = { > + .update_status = s6e63j0x03_set_brightness, > +}; > + > +static int s6e63j0x03_disable(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_NORMAL; > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + msleep(120); > + > + return 0; > +} > + > +static int s6e63j0x03_unprepare(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + int ret; > + > + ret = s6e63j0x03_power_off(ctx); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; > + > + return 0; > +} > + > +static int s6e63j0x03_panel_init(struct s6e63j0x03 *ctx) > +{ > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + ret = s6e63j0x03_enable_lv2_command(ctx); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + /* set porch adjustment */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf2, 0x1c, 0x28); > + if (ret < 0) > + return ret; > + > + /* set frame freq */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb5, 0x00, 0x02, 0x00); > + if (ret < 0) > + return ret; > + > + /* set caset, paset */ > + ret = mipi_dsi_dcs_set_column_address(dsi, FIRST_COLUMN, > + default_mode.hdisplay - 1 + FIRST_COLUMN); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1); > + if (ret < 0) > + return ret; > + > + /* set ltps timming 0, 1 */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf8, 0x08, 0x08, 0x08, 0x17, > + 0x00, 0x2a, 0x02, 0x26, 0x00, 0x00, 0x02, 0x00, 0x00); > + if (ret < 0) > + return ret; > + > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf7, 0x02); > + if (ret < 0) > + return ret; > + > + /* set param pos te_edge */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x01); > + if (ret < 0) > + return ret; > + > + /* set te rising edge */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xe2, 0x0f); > + if (ret < 0) > + return ret; > + > + /* set param pos default */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x00); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int s6e63j0x03_prepare(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + int ret; > + > + ret = s6e63j0x03_power_on(ctx); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_panel_init(ctx); > + if (ret < 0) > + goto err; > + > + ctx->bl_dev->props.power = FB_BLANK_NORMAL; > + > + return 0; > + > +err: > + s6e63j0x03_power_off(ctx); > + return ret; > +} > + > +static int s6e63j0x03_enable(struct drm_panel *panel) > +{ > + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); > + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); > + int ret; > + > + msleep(120); > + > + ret = s6e63j0x03_apply_mtp_key(ctx, true); > + if (ret < 0) > + return ret; > + > + /* set elvss_cond */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb1, 0x00, 0x09); > + if (ret < 0) > + return ret; > + > + /* set pos */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_SET_ADDRESS_MODE, 0x40); > + if (ret < 0) > + return ret; > + > + /* set default white brightness */ > + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff); > + if (ret < 0) > + return ret; > + > + /* set whilte ctrl */ s/whilte/white/ With above comments addressed, you can add: Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> -- Regards Andrzej > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); > + if (ret < 0) > + return ret; > + > + /* set acl off */ > + s6e63j0x03_dcs_write_seq_static(ret, ctx, > + MIPI_DCS_WRITE_POWER_SAVE, 0x00); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) > + return ret; > + > + ret = s6e63j0x03_apply_mtp_key(ctx, false); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) > + return ret; > + > + ctx->bl_dev->props.power = FB_BLANK_UNBLANK; > + > + return 0; > +} > + > +static int s6e63j0x03_get_modes(struct drm_panel *panel) > +{ > + struct drm_connector *connector = panel->connector; > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(panel->drm, &default_mode); > + if (!mode) { > + DRM_ERROR("failed to add mode %ux%ux@%u\n", > + default_mode.hdisplay, default_mode.vdisplay, > + default_mode.vrefresh); > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + drm_mode_probed_add(connector, mode); > + > + connector->display_info.width_mm = 29; > + connector->display_info.height_mm = 29; > + > + return 1; > +} > + > +static const struct drm_panel_funcs s6e63j0x03_funcs = { > + .disable = s6e63j0x03_disable, > + .unprepare = s6e63j0x03_unprepare, > + .prepare = s6e63j0x03_prepare, > + .enable = s6e63j0x03_enable, > + .get_modes = s6e63j0x03_get_modes, > +}; > + > +static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) > +{ > + struct device *dev = &dsi->dev; > + struct s6e63j0x03 *ctx; > + int ret; > + > + ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + > + mipi_dsi_set_drvdata(dsi, ctx); > + > + ctx->dev = dev; > + > + dsi->lanes = 1; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET; > + > + ctx->supplies[0].supply = "vdd3"; > + ctx->supplies[1].supply = "vci"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), > + ctx->supplies); > + if (ret < 0) { > + dev_err(dev, "failed to get regulators: %d\n", ret); > + return ret; > + } > + > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset_gpio)) { > + dev_err(dev, "cannot get reset-gpio: %ld\n", > + PTR_ERR(ctx->reset_gpio)); > + return PTR_ERR(ctx->reset_gpio); > + } > + > + drm_panel_init(&ctx->panel); > + ctx->panel.dev = dev; > + ctx->panel.funcs = &s6e63j0x03_funcs; > + > + ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx, > + &s6e63j0x03_bl_ops, NULL); > + if (IS_ERR(ctx->bl_dev)) { > + dev_err(dev, "failed to register backlight device\n"); > + return PTR_ERR(ctx->bl_dev); > + } > + > + ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS; > + ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS; > + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; > + > + ret = drm_panel_add(&ctx->panel); > + if (ret < 0) > + goto unregister_backlight; > + > + ret = mipi_dsi_attach(dsi); > + if (ret < 0) > + goto remove_panel; > + > + return ret; > + > +remove_panel: > + drm_panel_remove(&ctx->panel); > + > +unregister_backlight: > + backlight_device_unregister(ctx->bl_dev); > + > + return ret; > +} > + > +static int s6e63j0x03_remove(struct mipi_dsi_device *dsi) > +{ > + struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi); > + > + mipi_dsi_detach(dsi); > + drm_panel_remove(&ctx->panel); > + > + backlight_device_unregister(ctx->bl_dev); > + > + return 0; > +} > + > +static const struct of_device_id s6e63j0x03_of_match[] = { > + { .compatible = "samsung,s6e63j0x03" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match); > + > +static struct mipi_dsi_driver s6e63j0x03_driver = { > + .probe = s6e63j0x03_probe, > + .remove = s6e63j0x03_remove, > + .driver = { > + .name = "panel_samsung_s6e63j0x03", > + .of_match_table = s6e63j0x03_of_match, > + }, > +}; > +module_mipi_dsi_driver(s6e63j0x03_driver); > + > +MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>"); > +MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>"); > +MODULE_DESCRIPTION("MIPI-DSI based s6e63j0x03 AMOLED LCD Panel Driver"); > +MODULE_LICENSE("GPL v2"); -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12.07.2017 15:25, Andrzej Hajda wrote: > On 27.06.2017 04:11, Hoegeun Kwon wrote: >> This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver >> which uses mipi_dsi bus to communicate with panel. The panel has >> 320×320 resolution in 1.63" physical panel. This panel is used in >> Samsung Galaxy Gear 2. >> >> Signed-off-by: Inki Dae <inki.dae@samsung.com> >> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> >> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> >> --- >> drivers/gpu/drm/panel/Kconfig | 7 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 540 +++++++++++++++++++++++ >> 3 files changed, 548 insertions(+) >> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c >> >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> index 3e29a99..3f4afde 100644 >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -68,6 +68,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2 >> depends on DRM_MIPI_DSI >> select VIDEOMODE_HELPERS >> >> +config DRM_PANEL_SAMSUNG_S6E63J0X03 >> + tristate "Samsung S6E63J0X03 DSI command mode panel" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + select VIDEOMODE_HELPERS >> + >> config DRM_PANEL_SAMSUNG_S6E8AA0 >> tristate "Samsung S6E8AA0 DSI video mode panel" >> depends on OF >> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile >> index 292b3c7..f028269 100644 >> --- a/drivers/gpu/drm/panel/Makefile >> +++ b/drivers/gpu/drm/panel/Makefile >> @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o >> obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o >> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o >> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c >> new file mode 100644 >> index 0000000..c3d1b5d >> --- /dev/null >> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c >> @@ -0,0 +1,540 @@ >> +/* >> + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver. >> + * >> + * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd >> + * >> + * Inki Dae <inki.dae@samsung.com> >> + * Hoegeun Kwon <hoegeun.kwon@samsung.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include <drm/drmP.h> >> +#include <drm/drm_mipi_dsi.h> >> +#include <drm/drm_panel.h> >> +#include <linux/backlight.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/regulator/consumer.h> >> +#include <video/mipi_display.h> >> + >> +#define MCS_LEVEL2_KEY 0xf0 >> +#define MCS_MTP_KEY 0xf1 >> +#define MCS_MTP_SET3 0xd4 >> + >> +#define MAX_BRIGHTNESS 100 >> +#define DEFAULT_BRIGHTNESS 80 >> + >> +#define NUM_GAMMA_STEPS 9 >> +#define GAMMA_CMD_CNT 28 >> + >> +#define FIRST_COLUMN 20 >> + >> +struct s6e63j0x03 { >> + struct device *dev; >> + struct drm_panel panel; >> + struct backlight_device *bl_dev; >> + >> + struct regulator_bulk_data supplies[2]; >> + struct gpio_desc *reset_gpio; >> +}; >> + >> +static const struct drm_display_mode default_mode = { >> + .clock = 4649, >> + .hdisplay = 320, >> + .hsync_start = 320 + 1, >> + .hsync_end = 320 + 1 + 1, >> + .htotal = 320 + 1 + 1 + 1, >> + .vdisplay = 320, >> + .vsync_start = 320 + 150, >> + .vsync_end = 320 + 150 + 1, >> + .vtotal = 320 + 150 + 1 + 2, >> + .vrefresh = 30, >> + .flags = 0, >> +}; >> + >> +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = { >> + { /* Gamma 10 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26, >> + 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36, >> + 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf >> + }, >> + { /* gamma 30 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26, >> + 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34, >> + 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc >> + }, >> + { /* gamma 60 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a, >> + 0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33, >> + 0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5 >> + }, >> + { /* gamma 90 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29, >> + 0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31, >> + 0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09 >> + }, >> + { /* gamma 120 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28, >> + 0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31, >> + 0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b >> + }, >> + { /* gamma 150 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28, >> + 0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31, >> + 0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29 >> + }, >> + { /* gamma 200 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29, >> + 0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30, >> + 0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b >> + }, >> + { /* gamma 240 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a, >> + 0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30, >> + 0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47 >> + }, >> + { /* gamma 300 */ >> + MCS_MTP_SET3, >> + 0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28, >> + 0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f, >> + 0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57 >> + } >> +}; >> + >> +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel) >> +{ >> + return container_of(panel, struct s6e63j0x03, panel); >> +} >> + >> +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx, >> + const void *seq, size_t len) >> +{ >> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); >> + >> + return mipi_dsi_dcs_write_buffer(dsi, seq, len); >> +} >> + >> +#define s6e63j0x03_dcs_write_seq_static(ret, ctx, seq...) \ >> + do { \ >> + static const u8 d[] = { seq }; \ >> + ret = s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ >> + } while (0) > I think better would be to use statement expression here [1]: > #define s6e63j0x03_dcs_write_seq_static(ctx, seq...) \ > ({ \ > static const u8 d[] = { seq }; \ > s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ > }) > > This way instead of passing ret by reference you can use return value. > > [1]: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html > >> + >> +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) >> +{ >> + int ret; >> + >> + s6e63j0x03_dcs_write_seq_static(ret, ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); >> + return ret; >> +} > With the construct above this function can be simplified to: > > +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) > +{ > + s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); Ups, should be: return s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); Regards Andrzej > +} > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 3e29a99..3f4afde 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -68,6 +68,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2 depends on DRM_MIPI_DSI select VIDEOMODE_HELPERS +config DRM_PANEL_SAMSUNG_S6E63J0X03 + tristate "Samsung S6E63J0X03 DSI command mode panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6E8AA0 tristate "Samsung S6E8AA0 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 292b3c7..f028269 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c new file mode 100644 index 0000000..c3d1b5d --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c @@ -0,0 +1,540 @@ +/* + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver. + * + * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd + * + * Inki Dae <inki.dae@samsung.com> + * Hoegeun Kwon <hoegeun.kwon@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <video/mipi_display.h> + +#define MCS_LEVEL2_KEY 0xf0 +#define MCS_MTP_KEY 0xf1 +#define MCS_MTP_SET3 0xd4 + +#define MAX_BRIGHTNESS 100 +#define DEFAULT_BRIGHTNESS 80 + +#define NUM_GAMMA_STEPS 9 +#define GAMMA_CMD_CNT 28 + +#define FIRST_COLUMN 20 + +struct s6e63j0x03 { + struct device *dev; + struct drm_panel panel; + struct backlight_device *bl_dev; + + struct regulator_bulk_data supplies[2]; + struct gpio_desc *reset_gpio; +}; + +static const struct drm_display_mode default_mode = { + .clock = 4649, + .hdisplay = 320, + .hsync_start = 320 + 1, + .hsync_end = 320 + 1 + 1, + .htotal = 320 + 1 + 1 + 1, + .vdisplay = 320, + .vsync_start = 320 + 150, + .vsync_end = 320 + 150 + 1, + .vtotal = 320 + 150 + 1 + 2, + .vrefresh = 30, + .flags = 0, +}; + +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = { + { /* Gamma 10 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26, + 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36, + 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf + }, + { /* gamma 30 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26, + 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34, + 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc + }, + { /* gamma 60 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a, + 0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33, + 0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5 + }, + { /* gamma 90 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29, + 0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31, + 0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09 + }, + { /* gamma 120 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28, + 0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31, + 0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b + }, + { /* gamma 150 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28, + 0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31, + 0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29 + }, + { /* gamma 200 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29, + 0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30, + 0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b + }, + { /* gamma 240 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a, + 0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30, + 0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47 + }, + { /* gamma 300 */ + MCS_MTP_SET3, + 0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28, + 0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f, + 0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57 + } +}; + +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel) +{ + return container_of(panel, struct s6e63j0x03, panel); +} + +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx, + const void *seq, size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + return mipi_dsi_dcs_write_buffer(dsi, seq, len); +} + +#define s6e63j0x03_dcs_write_seq_static(ret, ctx, seq...) \ + do { \ + static const u8 d[] = { seq }; \ + ret = s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \ + } while (0) + +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx) +{ + int ret; + + s6e63j0x03_dcs_write_seq_static(ret, ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a); + return ret; +} + +static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on) +{ + int ret; + + if (on) + s6e63j0x03_dcs_write_seq_static(ret, ctx, + MCS_MTP_KEY, 0x5a, 0x5a); + else + s6e63j0x03_dcs_write_seq_static(ret, ctx, + MCS_MTP_KEY, 0xa5, 0xa5); + + return ret; +} + +static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); + if (ret < 0) + return ret; + + msleep(30); + + gpiod_set_value(ctx->reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value(ctx->reset_gpio, 0); + usleep_range(5000, 6000); + + return 0; +} + +static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx) +{ + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); +} + +static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness) +{ + unsigned int index; + + index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS); + + if (index >= NUM_GAMMA_STEPS) + index = NUM_GAMMA_STEPS - 1; + + return index; +} + +static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx, + unsigned int brightness) +{ + struct backlight_device *bl_dev = ctx->bl_dev; + unsigned int index = s6e63j0x03_get_brightness_index(brightness); + int ret; + + ret = s6e63j0x03_apply_mtp_key(ctx, true); + if (ret < 0) + return ret; + + ret = s6e63j0x03_dcs_write_seq(ctx, gamma_tbl[index], GAMMA_CMD_CNT); + if (ret < 0) + return ret; + + ret = s6e63j0x03_apply_mtp_key(ctx, false); + if (ret < 0) + return ret; + + bl_dev->props.brightness = brightness; + + return 0; +} + +static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev) +{ + struct s6e63j0x03 *ctx = bl_get_data(bl_dev); + unsigned int brightness = bl_dev->props.brightness; + + return s6e63j0x03_update_gamma(ctx, brightness); +} + +static const struct backlight_ops s6e63j0x03_bl_ops = { + .update_status = s6e63j0x03_set_brightness, +}; + +static int s6e63j0x03_disable(struct drm_panel *panel) +{ + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ctx->bl_dev->props.power = FB_BLANK_NORMAL; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + msleep(120); + + return 0; +} + +static int s6e63j0x03_unprepare(struct drm_panel *panel) +{ + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); + int ret; + + ret = s6e63j0x03_power_off(ctx); + if (ret < 0) + return ret; + + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; + + return 0; +} + +static int s6e63j0x03_panel_init(struct s6e63j0x03 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + ret = s6e63j0x03_enable_lv2_command(ctx); + if (ret < 0) + return ret; + + ret = s6e63j0x03_apply_mtp_key(ctx, true); + if (ret < 0) + return ret; + + /* set porch adjustment */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf2, 0x1c, 0x28); + if (ret < 0) + return ret; + + /* set frame freq */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb5, 0x00, 0x02, 0x00); + if (ret < 0) + return ret; + + /* set caset, paset */ + ret = mipi_dsi_dcs_set_column_address(dsi, FIRST_COLUMN, + default_mode.hdisplay - 1 + FIRST_COLUMN); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1); + if (ret < 0) + return ret; + + /* set ltps timming 0, 1 */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf8, 0x08, 0x08, 0x08, 0x17, + 0x00, 0x2a, 0x02, 0x26, 0x00, 0x00, 0x02, 0x00, 0x00); + if (ret < 0) + return ret; + + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xf7, 0x02); + if (ret < 0) + return ret; + + /* set param pos te_edge */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x01); + if (ret < 0) + return ret; + + /* set te rising edge */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xe2, 0x0f); + if (ret < 0) + return ret; + + /* set param pos default */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb0, 0x00); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) + return ret; + + ret = s6e63j0x03_apply_mtp_key(ctx, false); + if (ret < 0) + return ret; + + return 0; +} + +static int s6e63j0x03_prepare(struct drm_panel *panel) +{ + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); + int ret; + + ret = s6e63j0x03_power_on(ctx); + if (ret < 0) + return ret; + + ret = s6e63j0x03_panel_init(ctx); + if (ret < 0) + goto err; + + ctx->bl_dev->props.power = FB_BLANK_NORMAL; + + return 0; + +err: + s6e63j0x03_power_off(ctx); + return ret; +} + +static int s6e63j0x03_enable(struct drm_panel *panel) +{ + struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + msleep(120); + + ret = s6e63j0x03_apply_mtp_key(ctx, true); + if (ret < 0) + return ret; + + /* set elvss_cond */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, 0xb1, 0x00, 0x09); + if (ret < 0) + return ret; + + /* set pos */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, + MIPI_DCS_SET_ADDRESS_MODE, 0x40); + if (ret < 0) + return ret; + + /* set default white brightness */ + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff); + if (ret < 0) + return ret; + + /* set whilte ctrl */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, + MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); + if (ret < 0) + return ret; + + /* set acl off */ + s6e63j0x03_dcs_write_seq_static(ret, ctx, + MIPI_DCS_WRITE_POWER_SAVE, 0x00); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) + return ret; + + ret = s6e63j0x03_apply_mtp_key(ctx, false); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) + return ret; + + ctx->bl_dev->props.power = FB_BLANK_UNBLANK; + + return 0; +} + +static int s6e63j0x03_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + DRM_ERROR("failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = 29; + connector->display_info.height_mm = 29; + + return 1; +} + +static const struct drm_panel_funcs s6e63j0x03_funcs = { + .disable = s6e63j0x03_disable, + .unprepare = s6e63j0x03_unprepare, + .prepare = s6e63j0x03_prepare, + .enable = s6e63j0x03_enable, + .get_modes = s6e63j0x03_get_modes, +}; + +static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct s6e63j0x03 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 1; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET; + + ctx->supplies[0].supply = "vdd3"; + ctx->supplies[1].supply = "vci"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), + ctx->supplies); + if (ret < 0) { + dev_err(dev, "failed to get regulators: %d\n", ret); + return ret; + } + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(dev, "cannot get reset-gpio: %ld\n", + PTR_ERR(ctx->reset_gpio)); + return PTR_ERR(ctx->reset_gpio); + } + + drm_panel_init(&ctx->panel); + ctx->panel.dev = dev; + ctx->panel.funcs = &s6e63j0x03_funcs; + + ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx, + &s6e63j0x03_bl_ops, NULL); + if (IS_ERR(ctx->bl_dev)) { + dev_err(dev, "failed to register backlight device\n"); + return PTR_ERR(ctx->bl_dev); + } + + ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS; + ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS; + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; + + ret = drm_panel_add(&ctx->panel); + if (ret < 0) + goto unregister_backlight; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + goto remove_panel; + + return ret; + +remove_panel: + drm_panel_remove(&ctx->panel); + +unregister_backlight: + backlight_device_unregister(ctx->bl_dev); + + return ret; +} + +static int s6e63j0x03_remove(struct mipi_dsi_device *dsi) +{ + struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + + backlight_device_unregister(ctx->bl_dev); + + return 0; +} + +static const struct of_device_id s6e63j0x03_of_match[] = { + { .compatible = "samsung,s6e63j0x03" }, + { } +}; +MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match); + +static struct mipi_dsi_driver s6e63j0x03_driver = { + .probe = s6e63j0x03_probe, + .remove = s6e63j0x03_remove, + .driver = { + .name = "panel_samsung_s6e63j0x03", + .of_match_table = s6e63j0x03_of_match, + }, +}; +module_mipi_dsi_driver(s6e63j0x03_driver); + +MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>"); +MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>"); +MODULE_DESCRIPTION("MIPI-DSI based s6e63j0x03 AMOLED LCD Panel Driver"); +MODULE_LICENSE("GPL v2");