Message ID | f49a89a05f18e90871c2eeadcdcd783ac7961cdf.1500542254.git.jani.nikula@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, 2017-07-20 at 12:25 +0300, Jani Nikula wrote: > This reverts commit 560a758d39c616f83ac25ff6e0816a49ebe6401c. > > The DPCD backlight commits regress a Thinkpad X1 Carbon 4th Gen and a > BXT-P (in CI). Enabling dynamic backlight boots to a black screen, and > enabling DPCD backlight leads to a black screen after suspend/resume. > Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> for both patches. > References: http://mid.mail-archive.com/20170706135349.6tu3lz7uehazlnnn@boom > References: http://mid.mail-archive.com/20170627132326.f2q3yn4bh5flji4q@boom > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101619 > Reported-by: David Weinehall <david.weinehall@linux.intel.com> > Fixes: 560a758d39c6 ("drm/i915: Add heuristic to determine better way to adjust brightness") > Cc: Jenny TC <jenny.tc@intel.com> > Cc: David Weinehall <david.weinehall@linux.intel.com> > Cc: Puthikorn Voravootivat <puthik@chromium.org> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > Cc: intel-gfx@lists.freedesktop.org > Signed-off-by: Jani Nikula <jani.nikula@intel.com> > --- > drivers/gpu/drm/i915/i915_params.c | 7 ++- > drivers/gpu/drm/i915/i915_params.h | 2 +- > drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 61 ++------------------------- > 3 files changed, 7 insertions(+), 63 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c > index 5b5ab15d191f..14e2c2e57f96 100644 > --- a/drivers/gpu/drm/i915/i915_params.c > +++ b/drivers/gpu/drm/i915/i915_params.c > @@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = { > .huc_firmware_path = NULL, > .enable_dp_mst = true, > .inject_load_failure = 0, > - .enable_dpcd_backlight = -1, > + .enable_dpcd_backlight = false, > .enable_gvt = false, > }; > > @@ -246,10 +246,9 @@ MODULE_PARM_DESC(enable_dp_mst, > module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400); > MODULE_PARM_DESC(inject_load_failure, > "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)"); > -module_param_named_unsafe(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600); > +module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600); > MODULE_PARM_DESC(enable_dpcd_backlight, > - "Enable support for DPCD backlight control " > - "(-1:auto (default), 0:force disable, 1:force enabled if supported"); > + "Enable support for DPCD backlight control (default:false)"); > > module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); > MODULE_PARM_DESC(enable_gvt, > diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h > index 0d6cf9138dc4..febbfdbd30bd 100644 > --- a/drivers/gpu/drm/i915/i915_params.h > +++ b/drivers/gpu/drm/i915/i915_params.h > @@ -53,7 +53,6 @@ > func(int, edp_vswing); \ > func(int, reset); \ > func(unsigned int, inject_load_failure); \ > - func(int, enable_dpcd_backlight); \ > /* leave bools at the end to not create holes */ \ > func(bool, alpha_support); \ > func(bool, enable_cmd_parser); \ > @@ -67,6 +66,7 @@ > func(bool, verbose_state_checks); \ > func(bool, nuclear_pageflip); \ > func(bool, enable_dp_mst); \ > + func(bool, enable_dpcd_backlight); \ > func(bool, enable_gvt) > > #define MEMBER(T, member) T member > diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > index fea161727c6e..d2830ba3162e 100644 > --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c > @@ -251,66 +251,15 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector) > /* Check the eDP Display control capabilities registers to determine if > * the panel can support backlight control over the aux channel > */ > - if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) && > - (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) { > + if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && > + (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) && > + !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) { > DRM_DEBUG_KMS("AUX Backlight Control Supported!\n"); > return true; > } > return false; > } > > -/* > - * Heuristic function whether we should use AUX for backlight adjustment or not. > - * > - * We should use AUX for backlight brightness adjustment if panel doesn't this > - * via PWM pin or using AUX is better than using PWM pin. > - * > - * The heuristic to determine that using AUX pin is better than using PWM pin is > - * that the panel support any of the feature list here. > - * - Regional backlight brightness adjustment > - * - Backlight PWM frequency set > - * - More than 8 bits resolution of brightness level > - * - Backlight enablement via AUX and not by BL_ENABLE pin > - * > - * If all above are not true, assume that using PWM pin is better. > - */ > -static bool > -intel_dp_aux_display_control_heuristic(struct intel_connector *connector) > -{ > - struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); > - uint8_t reg_val; > - > - /* Panel doesn't support adjusting backlight brightness via PWN pin */ > - if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) > - return true; > - > - /* Panel supports regional backlight brightness adjustment */ > - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_GENERAL_CAP_3, > - ®_val) != 1) { > - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", > - DP_EDP_GENERAL_CAP_3); > - return false; > - } > - if (reg_val > 0) > - return true; > - > - /* Panel supports backlight PWM frequency set */ > - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) > - return true; > - > - /* Panel supports more than 8 bits resolution of brightness level */ > - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) > - return true; > - > - /* Panel supports enabling backlight via AUX but not by BL_ENABLE pin */ > - if ((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) && > - !(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP)) > - return true; > - > - return false; > - > -} > - > int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) > { > struct intel_panel *panel = &intel_connector->panel; > @@ -321,10 +270,6 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) > if (!intel_dp_aux_display_control_capable(intel_connector)) > return -ENODEV; > > - if (i915.enable_dpcd_backlight == -1 && > - !intel_dp_aux_display_control_heuristic(intel_connector)) > - return -ENODEV; > - > panel->backlight.setup = intel_dp_aux_setup_backlight; > panel->backlight.enable = intel_dp_aux_enable_backlight; > panel->backlight.disable = intel_dp_aux_disable_backlight;
On Thu, 20 Jul 2017, "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com> wrote: > On Thu, 2017-07-20 at 12:25 +0300, Jani Nikula wrote: >> This reverts commit 560a758d39c616f83ac25ff6e0816a49ebe6401c. >> >> The DPCD backlight commits regress a Thinkpad X1 Carbon 4th Gen and a >> BXT-P (in CI). Enabling dynamic backlight boots to a black screen, and >> enabling DPCD backlight leads to a black screen after suspend/resume. >> > > > Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> for > both patches. Thanks for the review, both pushed, with Daniel's IRC ack on top. BR, Jani. > >> References: http://mid.mail-archive.com/20170706135349.6tu3lz7uehazlnnn@boom >> References: http://mid.mail-archive.com/20170627132326.f2q3yn4bh5flji4q@boom >> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101619 >> Reported-by: David Weinehall <david.weinehall@linux.intel.com> >> Fixes: 560a758d39c6 ("drm/i915: Add heuristic to determine better way to adjust brightness") >> Cc: Jenny TC <jenny.tc@intel.com> >> Cc: David Weinehall <david.weinehall@linux.intel.com> >> Cc: Puthikorn Voravootivat <puthik@chromium.org> >> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> >> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> >> Cc: intel-gfx@lists.freedesktop.org >> Signed-off-by: Jani Nikula <jani.nikula@intel.com> >> --- >> drivers/gpu/drm/i915/i915_params.c | 7 ++- >> drivers/gpu/drm/i915/i915_params.h | 2 +- >> drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 61 ++------------------------- >> 3 files changed, 7 insertions(+), 63 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c >> index 5b5ab15d191f..14e2c2e57f96 100644 >> --- a/drivers/gpu/drm/i915/i915_params.c >> +++ b/drivers/gpu/drm/i915/i915_params.c >> @@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = { >> .huc_firmware_path = NULL, >> .enable_dp_mst = true, >> .inject_load_failure = 0, >> - .enable_dpcd_backlight = -1, >> + .enable_dpcd_backlight = false, >> .enable_gvt = false, >> }; >> >> @@ -246,10 +246,9 @@ MODULE_PARM_DESC(enable_dp_mst, >> module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400); >> MODULE_PARM_DESC(inject_load_failure, >> "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)"); >> -module_param_named_unsafe(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600); >> +module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600); >> MODULE_PARM_DESC(enable_dpcd_backlight, >> - "Enable support for DPCD backlight control " >> - "(-1:auto (default), 0:force disable, 1:force enabled if supported"); >> + "Enable support for DPCD backlight control (default:false)"); >> >> module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); >> MODULE_PARM_DESC(enable_gvt, >> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h >> index 0d6cf9138dc4..febbfdbd30bd 100644 >> --- a/drivers/gpu/drm/i915/i915_params.h >> +++ b/drivers/gpu/drm/i915/i915_params.h >> @@ -53,7 +53,6 @@ >> func(int, edp_vswing); \ >> func(int, reset); \ >> func(unsigned int, inject_load_failure); \ >> - func(int, enable_dpcd_backlight); \ >> /* leave bools at the end to not create holes */ \ >> func(bool, alpha_support); \ >> func(bool, enable_cmd_parser); \ >> @@ -67,6 +66,7 @@ >> func(bool, verbose_state_checks); \ >> func(bool, nuclear_pageflip); \ >> func(bool, enable_dp_mst); \ >> + func(bool, enable_dpcd_backlight); \ >> func(bool, enable_gvt) >> >> #define MEMBER(T, member) T member >> diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c >> index fea161727c6e..d2830ba3162e 100644 >> --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c >> +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c >> @@ -251,66 +251,15 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector) >> /* Check the eDP Display control capabilities registers to determine if >> * the panel can support backlight control over the aux channel >> */ >> - if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) && >> - (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) { >> + if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && >> + (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) && >> + !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) { >> DRM_DEBUG_KMS("AUX Backlight Control Supported!\n"); >> return true; >> } >> return false; >> } >> >> -/* >> - * Heuristic function whether we should use AUX for backlight adjustment or not. >> - * >> - * We should use AUX for backlight brightness adjustment if panel doesn't this >> - * via PWM pin or using AUX is better than using PWM pin. >> - * >> - * The heuristic to determine that using AUX pin is better than using PWM pin is >> - * that the panel support any of the feature list here. >> - * - Regional backlight brightness adjustment >> - * - Backlight PWM frequency set >> - * - More than 8 bits resolution of brightness level >> - * - Backlight enablement via AUX and not by BL_ENABLE pin >> - * >> - * If all above are not true, assume that using PWM pin is better. >> - */ >> -static bool >> -intel_dp_aux_display_control_heuristic(struct intel_connector *connector) >> -{ >> - struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); >> - uint8_t reg_val; >> - >> - /* Panel doesn't support adjusting backlight brightness via PWN pin */ >> - if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) >> - return true; >> - >> - /* Panel supports regional backlight brightness adjustment */ >> - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_GENERAL_CAP_3, >> - ®_val) != 1) { >> - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", >> - DP_EDP_GENERAL_CAP_3); >> - return false; >> - } >> - if (reg_val > 0) >> - return true; >> - >> - /* Panel supports backlight PWM frequency set */ >> - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) >> - return true; >> - >> - /* Panel supports more than 8 bits resolution of brightness level */ >> - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) >> - return true; >> - >> - /* Panel supports enabling backlight via AUX but not by BL_ENABLE pin */ >> - if ((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) && >> - !(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP)) >> - return true; >> - >> - return false; >> - >> -} >> - >> int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) >> { >> struct intel_panel *panel = &intel_connector->panel; >> @@ -321,10 +270,6 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) >> if (!intel_dp_aux_display_control_capable(intel_connector)) >> return -ENODEV; >> >> - if (i915.enable_dpcd_backlight == -1 && >> - !intel_dp_aux_display_control_heuristic(intel_connector)) >> - return -ENODEV; >> - >> panel->backlight.setup = intel_dp_aux_setup_backlight; >> panel->backlight.enable = intel_dp_aux_enable_backlight; >> panel->backlight.disable = intel_dp_aux_disable_backlight;
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c index 5b5ab15d191f..14e2c2e57f96 100644 --- a/drivers/gpu/drm/i915/i915_params.c +++ b/drivers/gpu/drm/i915/i915_params.c @@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = { .huc_firmware_path = NULL, .enable_dp_mst = true, .inject_load_failure = 0, - .enable_dpcd_backlight = -1, + .enable_dpcd_backlight = false, .enable_gvt = false, }; @@ -246,10 +246,9 @@ MODULE_PARM_DESC(enable_dp_mst, module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400); MODULE_PARM_DESC(inject_load_failure, "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)"); -module_param_named_unsafe(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600); +module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600); MODULE_PARM_DESC(enable_dpcd_backlight, - "Enable support for DPCD backlight control " - "(-1:auto (default), 0:force disable, 1:force enabled if supported"); + "Enable support for DPCD backlight control (default:false)"); module_param_named(enable_gvt, i915.enable_gvt, bool, 0400); MODULE_PARM_DESC(enable_gvt, diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h index 0d6cf9138dc4..febbfdbd30bd 100644 --- a/drivers/gpu/drm/i915/i915_params.h +++ b/drivers/gpu/drm/i915/i915_params.h @@ -53,7 +53,6 @@ func(int, edp_vswing); \ func(int, reset); \ func(unsigned int, inject_load_failure); \ - func(int, enable_dpcd_backlight); \ /* leave bools at the end to not create holes */ \ func(bool, alpha_support); \ func(bool, enable_cmd_parser); \ @@ -67,6 +66,7 @@ func(bool, verbose_state_checks); \ func(bool, nuclear_pageflip); \ func(bool, enable_dp_mst); \ + func(bool, enable_dpcd_backlight); \ func(bool, enable_gvt) #define MEMBER(T, member) T member diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c index fea161727c6e..d2830ba3162e 100644 --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c @@ -251,66 +251,15 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector) /* Check the eDP Display control capabilities registers to determine if * the panel can support backlight control over the aux channel */ - if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) && - (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) { + if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP && + (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) && + !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) { DRM_DEBUG_KMS("AUX Backlight Control Supported!\n"); return true; } return false; } -/* - * Heuristic function whether we should use AUX for backlight adjustment or not. - * - * We should use AUX for backlight brightness adjustment if panel doesn't this - * via PWM pin or using AUX is better than using PWM pin. - * - * The heuristic to determine that using AUX pin is better than using PWM pin is - * that the panel support any of the feature list here. - * - Regional backlight brightness adjustment - * - Backlight PWM frequency set - * - More than 8 bits resolution of brightness level - * - Backlight enablement via AUX and not by BL_ENABLE pin - * - * If all above are not true, assume that using PWM pin is better. - */ -static bool -intel_dp_aux_display_control_heuristic(struct intel_connector *connector) -{ - struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); - uint8_t reg_val; - - /* Panel doesn't support adjusting backlight brightness via PWN pin */ - if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) - return true; - - /* Panel supports regional backlight brightness adjustment */ - if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_GENERAL_CAP_3, - ®_val) != 1) { - DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n", - DP_EDP_GENERAL_CAP_3); - return false; - } - if (reg_val > 0) - return true; - - /* Panel supports backlight PWM frequency set */ - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP) - return true; - - /* Panel supports more than 8 bits resolution of brightness level */ - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) - return true; - - /* Panel supports enabling backlight via AUX but not by BL_ENABLE pin */ - if ((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP) && - !(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP)) - return true; - - return false; - -} - int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) { struct intel_panel *panel = &intel_connector->panel; @@ -321,10 +270,6 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector) if (!intel_dp_aux_display_control_capable(intel_connector)) return -ENODEV; - if (i915.enable_dpcd_backlight == -1 && - !intel_dp_aux_display_control_heuristic(intel_connector)) - return -ENODEV; - panel->backlight.setup = intel_dp_aux_setup_backlight; panel->backlight.enable = intel_dp_aux_enable_backlight; panel->backlight.disable = intel_dp_aux_disable_backlight;
This reverts commit 560a758d39c616f83ac25ff6e0816a49ebe6401c. The DPCD backlight commits regress a Thinkpad X1 Carbon 4th Gen and a BXT-P (in CI). Enabling dynamic backlight boots to a black screen, and enabling DPCD backlight leads to a black screen after suspend/resume. References: http://mid.mail-archive.com/20170706135349.6tu3lz7uehazlnnn@boom References: http://mid.mail-archive.com/20170627132326.f2q3yn4bh5flji4q@boom Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101619 Reported-by: David Weinehall <david.weinehall@linux.intel.com> Fixes: 560a758d39c6 ("drm/i915: Add heuristic to determine better way to adjust brightness") Cc: Jenny TC <jenny.tc@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Puthikorn Voravootivat <puthik@chromium.org> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> --- drivers/gpu/drm/i915/i915_params.c | 7 ++- drivers/gpu/drm/i915/i915_params.h | 2 +- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 61 ++------------------------- 3 files changed, 7 insertions(+), 63 deletions(-)