diff mbox

ARC: clk: introduce HSDKv1 pll driver

Message ID 20170714153128.8945-1-Eugeniy.Paltsev@synopsys.com (mailing list archive)
State Superseded
Delegated to: Stephen Boyd
Headers show

Commit Message

Eugeniy Paltsev July 14, 2017, 3:31 p.m. UTC 
HSDKv1 boards manages it's clocks using various PLLs. These PLL has same
dividers and corresponding control registers mapped to different addresses.
So we add one common driver for such PLLs.

Each PLL on HSDK board consist of three dividers: IDIV, FBDIV and
ODIV. Output clock value is managed using these dividers.

We add pre-defined tables with supported rate values and appropriate
configurations of IDIV, FBDIV and ODIV for each value.

As of today we add support for PLLs that generate clock for the
HSDKv1 arc cpus, system, ddr, AXI tunnel and hdmi.

By this patch we add support for several plls (arc cpus pll and others),
so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
and regular probing for others plls.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 .../bindings/clock/snps,hsdkv1-pll-clock.txt       |  28 ++
 MAINTAINERS                                        |   6 +
 drivers/clk/Kconfig                                |   7 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk-hsdk-pll.c                         | 346 +++++++++++++++++++++
 5 files changed, 388 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
 create mode 100644 drivers/clk/clk-hsdk-pll.c

Comments

Vineet Gupta July 27, 2017, 7:50 a.m. UTC | #1 
Hi Stephen,

On 07/14/2017 09:01 PM, Eugeniy Paltsev wrote:
> HSDKv1 boards manages it's clocks using various PLLs. These PLL has same
> dividers and corresponding control registers mapped to different addresses.
> So we add one common driver for such PLLs.
> 
> Each PLL on HSDK board consist of three dividers: IDIV, FBDIV and
> ODIV. Output clock value is managed using these dividers.
> 
> We add pre-defined tables with supported rate values and appropriate
> configurations of IDIV, FBDIV and ODIV for each value.
> 
> As of today we add support for PLLs that generate clock for the
> HSDKv1 arc cpus, system, ddr, AXI tunnel and hdmi.
> 
> By this patch we add support for several plls (arc cpus pll and others),
> so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
> and regular probing for others plls.
> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

Gentle ping, any chance you could look at this sometime.

Thx,
-Vineet

> ---
>   .../bindings/clock/snps,hsdkv1-pll-clock.txt       |  28 ++
>   MAINTAINERS                                        |   6 +
>   drivers/clk/Kconfig                                |   7 +
>   drivers/clk/Makefile                               |   1 +
>   drivers/clk/clk-hsdk-pll.c                         | 346 +++++++++++++++++++++
>   5 files changed, 388 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
>   create mode 100644 drivers/clk/clk-hsdk-pll.c
> 
> diff --git a/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
> new file mode 100644
> index 0000000..3580aa0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
> @@ -0,0 +1,28 @@
> +Binding for the HSDKv1 Generic PLL clock
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: should be "snps,hsdk-<name>-pll-clock"
> +  "snps,hsdk-core-pll-clock"
> +  "snps,hsdk-gp-pll-clock"
> +  "snps,hsdk-hdmi-pll-clock"
> +- reg : should contain base register location and length.
> +- clocks: shall be the input parent clock phandle for the PLL.
> +- #clock-cells: from common clock binding; Should always be set to 0.
> +
> +Example:
> +	input_clk: input-clk {
> +		clock-frequency = <33333333>;
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	cpu_clk: cpu-clk@0 {
> +		compatible = "snps,hsdk-core-pll-clock";
> +		reg = <0x00 0x10>;
> +		#clock-cells = <0>;
> +		clocks = <&input_clk>;
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b5ab794..96d0021 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12768,6 +12768,12 @@ F:	arch/arc/plat-axs10x
>   F:	arch/arc/boot/dts/ax*
>   F:	Documentation/devicetree/bindings/arc/axs10*
>   
> +SYNOPSYS ARC HSDKv1 SDP pll clock driver
> +M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> +S:	Supported
> +F:	drivers/clk/clk-hsdk-pll.c
> +F:	Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
> +
>   SYSTEM CONFIGURATION (SYSCON)
>   M:	Lee Jones <lee.jones@linaro.org>
>   M:	Arnd Bergmann <arnd@arndb.de>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 68ca2d9..198fc14 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -219,6 +219,13 @@ config COMMON_CLK_VC5
>   	  This driver supports the IDT VersaClock5 programmable clock
>   	  generator.
>   
> +config CLK_HSDK_V1
> +	bool "PLL Driver for HSDKv1 platform"
> +	depends on OF || COMPILE_TEST
> +	---help---
> +	  This driver supports the HSDKv1 core, system, ddr, tunnel and hdmi PLLs
> +	  control.
> +
>   source "drivers/clk/bcm/Kconfig"
>   source "drivers/clk/hisilicon/Kconfig"
>   source "drivers/clk/imgtec/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index cd376b3..91e6cbd 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
>   obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
>   obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
>   obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
> +obj-$(CONFIG_CLK_HSDK_V1)		+= clk-hsdk-pll.o
>   obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
>   obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o
>   obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
> diff --git a/drivers/clk/clk-hsdk-pll.c b/drivers/clk/clk-hsdk-pll.c
> new file mode 100644
> index 0000000..4e58e55
> --- /dev/null
> +++ b/drivers/clk/clk-hsdk-pll.c
> @@ -0,0 +1,346 @@
> +/*
> + * Synopsys HSDKv1 SDP Generic PLL clock driver
> + *
> + * Copyright (C) 2017 Synopsys
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +
> +#define CGU_PLL_CTRL	0x000 /* ARC PLL control register */
> +#define CGU_PLL_STATUS	0x004 /* ARC PLL status register */
> +#define CGU_PLL_FMEAS	0x008 /* ARC PLL frequency measurement register */
> +#define CGU_PLL_MON	0x00C /* ARC PLL monitor register */
> +
> +#define CGU_PLL_CTRL_ODIV_SHIFT		2
> +#define CGU_PLL_CTRL_IDIV_SHIFT		4
> +#define CGU_PLL_CTRL_FBDIV_SHIFT	9
> +#define CGU_PLL_CTRL_BAND_SHIFT		20
> +
> +#define CGU_PLL_CTRL_ODIV_MASK		GENMASK(3, CGU_PLL_CTRL_ODIV_SHIFT)
> +#define CGU_PLL_CTRL_IDIV_MASK		GENMASK(8, CGU_PLL_CTRL_IDIV_SHIFT)
> +#define CGU_PLL_CTRL_FBDIV_MASK		GENMASK(15, CGU_PLL_CTRL_FBDIV_SHIFT)
> +
> +#define CGU_PLL_CTRL_PD			BIT(0)
> +#define CGU_PLL_CTRL_BYPASS		BIT(1)
> +
> +#define CGU_PLL_STATUS_LOCK		BIT(0)
> +#define CGU_PLL_STATUS_ERR		BIT(1)
> +
> +#define HSDK_PLL_MAX_LOCK_TIME		100 /* 100 us */
> +
> +struct hsdk_pll_cfg {
> +	u32 rate;
> +	u32 idiv;
> +	u32 fbdiv;
> +	u32 odiv;
> +	u32 band;
> +};
> +
> +static const struct hsdk_pll_cfg asdt_pll_cfg[] = {
> +	{ 100000000,  0, 11, 3, 0 },
> +	{ 133000000,  0, 15, 3, 0 },
> +	{ 200000000,  1, 47, 3, 0 },
> +	{ 233000000,  1, 27, 2, 0 },
> +	{ 300000000,  1, 35, 2, 0 },
> +	{ 333000000,  1, 39, 2, 0 },
> +	{ 400000000,  1, 47, 2, 0 },
> +	{ 500000000,  0, 14, 1, 0 },
> +	{ 600000000,  0, 17, 1, 0 },
> +	{ 700000000,  0, 20, 1, 0 },
> +	{ 800000000,  0, 23, 1, 0 },
> +	{ 900000000,  1, 26, 0, 0 },
> +	{ 1000000000, 1, 29, 0, 0 },
> +	{ 1100000000, 1, 32, 0, 0 },
> +	{ 1200000000, 1, 35, 0, 0 },
> +	{ 1300000000, 1, 38, 0, 0 },
> +	{ 1400000000, 1, 41, 0, 0 },
> +	{ 1500000000, 1, 44, 0, 0 },
> +	{ 1600000000, 1, 47, 0, 0 },
> +	{}
> +};
> +
> +static const struct hsdk_pll_cfg hdmi_pll_cfg[] = {
> +	{ 297000000,  0, 21, 2, 0 },
> +	{ 540000000,  0, 19, 1, 0 },
> +	{ 594000000,  0, 21, 1, 0 },
> +	{}
> +};
> +
> +struct hsdk_pll_clk {
> +	struct clk_hw hw;
> +	void __iomem *regs;
> +	const struct hsdk_pll_cfg *pll_cfg;
> +	struct device *dev;
> +};
> +
> +static inline void hsdk_pll_write(struct hsdk_pll_clk *clk, u32 reg, u32 val)
> +{
> +	iowrite32(val, clk->regs + reg);
> +}
> +
> +static inline u32 hsdk_pll_read(struct hsdk_pll_clk *clk, u32 reg)
> +{
> +	return ioread32(clk->regs + reg);
> +}
> +
> +static inline void hsdk_pll_set_cfg(struct hsdk_pll_clk *clk,
> +				    const struct hsdk_pll_cfg *cfg)
> +{
> +	u32 val = 0;
> +
> +	/* Powerdown and Bypass bits should be cleared */
> +	val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
> +	val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
> +	val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
> +	val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
> +
> +	dev_dbg(clk->dev, "write configurarion: 0x%x", val);
> +
> +	hsdk_pll_write(clk, CGU_PLL_CTRL, val);
> +}
> +
> +static inline bool hsdk_pll_is_locked(struct hsdk_pll_clk *clk)
> +{
> +	u32 val;
> +
> +	val = hsdk_pll_read(clk, CGU_PLL_STATUS);
> +
> +	return (val & CGU_PLL_STATUS_LOCK) == CGU_PLL_STATUS_LOCK;
> +}
> +
> +static inline bool hsdk_pll_is_err(struct hsdk_pll_clk *clk)
> +{
> +	u32 val;
> +
> +	val = hsdk_pll_read(clk, CGU_PLL_STATUS);
> +
> +	return (val & CGU_PLL_STATUS_ERR) == CGU_PLL_STATUS_ERR;
> +}
> +
> +static inline struct hsdk_pll_clk *to_hsdk_pll_clk(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct hsdk_pll_clk, hw);
> +}
> +
> +static unsigned long hsdk_pll_recalc_rate(struct clk_hw *hw,
> +					  unsigned long parent_rate)
> +{
> +	u32 val;
> +	u64 rate;
> +	u32 idiv, fbdiv, odiv;
> +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> +
> +	val = hsdk_pll_read(clk, CGU_PLL_CTRL);
> +
> +	dev_dbg(clk->dev, "current configurarion: 0x%x", val);
> +
> +	/* Check if PLL is disabled */
> +	if ((val & CGU_PLL_CTRL_PD) == CGU_PLL_CTRL_PD)
> +		return 0;
> +
> +	/* Check if PLL is bypassed */
> +	if ((val & CGU_PLL_CTRL_BYPASS) == CGU_PLL_CTRL_BYPASS)
> +		return parent_rate;
> +
> +	/* input devider = reg.idiv + 1 */
> +	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >> CGU_PLL_CTRL_IDIV_SHIFT);
> +	/* fb devider = 2*(reg.fbdiv + 1) */
> +	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >> CGU_PLL_CTRL_FBDIV_SHIFT));
> +	/* output devider = 2^(reg.odiv) */
> +	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT);
> +
> +	rate = (u64)parent_rate * fbdiv;
> +	do_div(rate, idiv * odiv);
> +
> +	return rate;
> +}
> +
> +static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> +				unsigned long *prate)
> +{
> +	int i;
> +	long best_rate;
> +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> +	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
> +
> +	if (pll_cfg[0].rate == 0)
> +		return -EINVAL;
> +
> +	best_rate = pll_cfg[0].rate;
> +
> +	for (i = 1; pll_cfg[i].rate != 0; i++) {
> +		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
> +			best_rate = pll_cfg[i].rate;
> +	}
> +
> +	dev_dbg(clk->dev, "chosen best rate: %lu", best_rate);
> +
> +	return best_rate;
> +}
> +
> +static int hsdk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> +			     unsigned long parent_rate)
> +{
> +	int i;
> +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> +	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
> +
> +	for (i = 0; pll_cfg[i].rate != 0; i++) {
> +		if (pll_cfg[i].rate == rate) {
> +			hsdk_pll_set_cfg(clk, &pll_cfg[i]);
> +
> +			/*
> +			 * Wait until CGU relocks and check error status.
> +			 * If after timeout CGU is unlocked yet return error.
> +			 */
> +			udelay(HSDK_PLL_MAX_LOCK_TIME);
> +			if (!hsdk_pll_is_locked(clk))
> +				return -ETIMEDOUT;
> +
> +			if (hsdk_pll_is_err(clk))
> +				return -EINVAL;
> +
> +			return 0;
> +		}
> +	}
> +
> +	dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
> +			parent_rate);
> +
> +	return -EINVAL;
> +}
> +
> +static const struct clk_ops hsdk_pll_ops = {
> +	.recalc_rate = hsdk_pll_recalc_rate,
> +	.round_rate = hsdk_pll_round_rate,
> +	.set_rate = hsdk_pll_set_rate,
> +};
> +
> +static int hsdk_pll_clk_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	const char *parent_name;
> +	struct hsdk_pll_clk *pll_clk;
> +	struct resource *mem;
> +	struct clk_init_data init = { };
> +	int ret;
> +
> +	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
> +	if (!pll_clk)
> +		return -ENOMEM;
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pll_clk->regs = devm_ioremap_resource(dev, mem);
> +	if (IS_ERR(pll_clk->regs))
> +		return PTR_ERR(pll_clk->regs);
> +
> +	init.name = dev->of_node->name;
> +	init.ops = &hsdk_pll_ops;
> +	parent_name = of_clk_get_parent_name(dev->of_node, 0);
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +	pll_clk->hw.init = &init;
> +	pll_clk->dev = dev;
> +	pll_clk->pll_cfg = of_device_get_match_data(dev);
> +
> +	if (!pll_clk->pll_cfg) {
> +		dev_err(dev, "No OF match data provided\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = devm_clk_hw_register(dev, &pll_clk->hw);
> +	if (ret) {
> +		dev_err(dev, "failed to register %s clock\n", init.name);
> +		return ret;
> +	}
> +
> +	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
> +			&pll_clk->hw);
> +}
> +
> +static int hsdk_pll_clk_remove(struct platform_device *pdev)
> +{
> +	of_clk_del_provider(pdev->dev.of_node);
> +	return 0;
> +}
> +
> +static void __init of_hsdk_pll_clk_setup(struct device_node *node)
> +{
> +	const char *parent_name;
> +	struct hsdk_pll_clk *pll_clk;
> +	struct clk_init_data init = { };
> +	int ret;
> +
> +	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
> +	if (!pll_clk)
> +		return;
> +
> +	pll_clk->regs = of_iomap(node, 0);
> +	if (!pll_clk->regs) {
> +		pr_err("failed to map pll registers\n");
> +		goto err_free_pll_clk;
> +	}
> +
> +	init.name = node->name;
> +	init.ops = &hsdk_pll_ops;
> +	parent_name = of_clk_get_parent_name(node, 0);
> +	init.parent_names = &parent_name;
> +	init.num_parents = parent_name ? 1 : 0;
> +	pll_clk->hw.init = &init;
> +	pll_clk->pll_cfg = asdt_pll_cfg;
> +
> +	ret = clk_hw_register(NULL, &pll_clk->hw);
> +	if (ret) {
> +		pr_err("failed to register %s clock\n", node->name);
> +		goto err_unmap_regs;
> +	}
> +
> +	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
> +	if (ret) {
> +		pr_err("failed to add hw provider for %s clock\n", node->name);
> +		goto err_unmap_regs;
> +	}
> +
> +	return;
> +
> +err_unmap_regs:
> +	iounmap(pll_clk->regs);
> +err_free_pll_clk:
> +	kfree(pll_clk);
> +}
> +CLK_OF_DECLARE(hsdk_pll_clock, "snps,hsdk-core-pll-clock",
> +of_hsdk_pll_clk_setup);
> +
> +static const struct of_device_id hsdk_pll_clk_id[] = {
> +	{ .compatible = "snps,hsdk-gp-pll-clock", .data = &asdt_pll_cfg},
> +	{ .compatible = "snps,hsdk-hdmi-pll-clock", .data = &hdmi_pll_cfg},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, hsdk_pll_clk_id);
> +
> +static struct platform_driver hsdk_pll_clk_driver = {
> +	.driver = {
> +		.name = "hsdk-gp-pll-clock",
> +		.of_match_table = hsdk_pll_clk_id,
> +	},
> +	.probe = hsdk_pll_clk_probe,
> +	.remove = hsdk_pll_clk_remove,
> +};
> +builtin_platform_driver(hsdk_pll_clk_driver);
> +
> +MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
> +MODULE_DESCRIPTION("Synopsys HSDKv1 SDP Generic PLL Clock Driver");
> +MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd July 28, 2017, 1:24 a.m. UTC | #2 
On 07/27, Vineet Gupta wrote:
> Hi Stephen,
> 
> On 07/14/2017 09:01 PM, Eugeniy Paltsev wrote:
> >HSDKv1 boards manages it's clocks using various PLLs. These PLL has same
> >dividers and corresponding control registers mapped to different addresses.
> >So we add one common driver for such PLLs.
> >
> >Each PLL on HSDK board consist of three dividers: IDIV, FBDIV and
> >ODIV. Output clock value is managed using these dividers.
> >
> >We add pre-defined tables with supported rate values and appropriate
> >configurations of IDIV, FBDIV and ODIV for each value.
> >
> >As of today we add support for PLLs that generate clock for the
> >HSDKv1 arc cpus, system, ddr, AXI tunnel and hdmi.
> >
> >By this patch we add support for several plls (arc cpus pll and others),
> >so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
> >and regular probing for others plls.
> >
> >Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> 
> Gentle ping, any chance you could look at this sometime.
> 
> Thx,

Yes it's in the queue. Probably get to it tomorrow.
Stephen Boyd Aug. 4, 2017, 1:53 a.m. UTC | #3 
On 07/14, Eugeniy Paltsev wrote:
> HSDKv1 boards manages it's clocks using various PLLs. These PLL has same

s/it's/its/

s/has/have/

> dividers and corresponding control registers mapped to different addresses.
> So we add one common driver for such PLLs.
> 
> Each PLL on HSDK board consist of three dividers: IDIV, FBDIV and
> ODIV. Output clock value is managed using these dividers.
> 
> We add pre-defined tables with supported rate values and appropriate
> configurations of IDIV, FBDIV and ODIV for each value.
> 
> As of today we add support for PLLs that generate clock for the
> HSDKv1 arc cpus, system, ddr, AXI tunnel and hdmi.
> 
> By this patch we add support for several plls (arc cpus pll and others),
> so we had to use two different init types: CLK_OF_DECLARE for arc cpus pll
> and regular probing for others plls.

Ok. This should be put into comment form above the
CLK_OF_DECLARE() macro in the driver. Like "CPU PLL needed early
for XYZ thing that is used early".

> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 68ca2d9..198fc14 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -219,6 +219,13 @@ config COMMON_CLK_VC5
>  	  This driver supports the IDT VersaClock5 programmable clock
>  	  generator.
>  
> +config CLK_HSDK_V1
> +	bool "PLL Driver for HSDKv1 platform"
> +	depends on OF || COMPILE_TEST
> +	---help---
> +	  This driver supports the HSDKv1 core, system, ddr, tunnel and hdmi PLLs
> +	  control.
> +

Are we keeping this file sorted? Not really, but please put this
somewhere semi-sorted instead of at the end of the file. I'll go
and sort this Kconfig file later.

> diff --git a/drivers/clk/clk-hsdk-pll.c b/drivers/clk/clk-hsdk-pll.c
> new file mode 100644
> index 0000000..4e58e55
> --- /dev/null
> +++ b/drivers/clk/clk-hsdk-pll.c
> @@ -0,0 +1,346 @@
> +/*
> + * Synopsys HSDKv1 SDP Generic PLL clock driver
> + *
> + * Copyright (C) 2017 Synopsys
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>

No need for this include.

> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +
> +#define CGU_PLL_CTRL	0x000 /* ARC PLL control register */
> +#define CGU_PLL_STATUS	0x004 /* ARC PLL status register */
> +#define CGU_PLL_FMEAS	0x008 /* ARC PLL frequency measurement register */
> +#define CGU_PLL_MON	0x00C /* ARC PLL monitor register */
> +
> +#define CGU_PLL_CTRL_ODIV_SHIFT		2
> +#define CGU_PLL_CTRL_IDIV_SHIFT		4
> +#define CGU_PLL_CTRL_FBDIV_SHIFT	9
> +#define CGU_PLL_CTRL_BAND_SHIFT		20
> +
> +#define CGU_PLL_CTRL_ODIV_MASK		GENMASK(3, CGU_PLL_CTRL_ODIV_SHIFT)
> +#define CGU_PLL_CTRL_IDIV_MASK		GENMASK(8, CGU_PLL_CTRL_IDIV_SHIFT)
> +#define CGU_PLL_CTRL_FBDIV_MASK		GENMASK(15, CGU_PLL_CTRL_FBDIV_SHIFT)
> +
> +#define CGU_PLL_CTRL_PD			BIT(0)
> +#define CGU_PLL_CTRL_BYPASS		BIT(1)
> +
> +#define CGU_PLL_STATUS_LOCK		BIT(0)
> +#define CGU_PLL_STATUS_ERR		BIT(1)
> +
> +#define HSDK_PLL_MAX_LOCK_TIME		100 /* 100 us */
> +
> +struct hsdk_pll_cfg {
> +	u32 rate;
> +	u32 idiv;
> +	u32 fbdiv;
> +	u32 odiv;
> +	u32 band;
> +};
> +
> +static const struct hsdk_pll_cfg asdt_pll_cfg[] = {
> +	{ 100000000,  0, 11, 3, 0 },
> +	{ 133000000,  0, 15, 3, 0 },
> +	{ 200000000,  1, 47, 3, 0 },
> +	{ 233000000,  1, 27, 2, 0 },
> +	{ 300000000,  1, 35, 2, 0 },
> +	{ 333000000,  1, 39, 2, 0 },
> +	{ 400000000,  1, 47, 2, 0 },
> +	{ 500000000,  0, 14, 1, 0 },
> +	{ 600000000,  0, 17, 1, 0 },
> +	{ 700000000,  0, 20, 1, 0 },
> +	{ 800000000,  0, 23, 1, 0 },
> +	{ 900000000,  1, 26, 0, 0 },
> +	{ 1000000000, 1, 29, 0, 0 },
> +	{ 1100000000, 1, 32, 0, 0 },
> +	{ 1200000000, 1, 35, 0, 0 },
> +	{ 1300000000, 1, 38, 0, 0 },
> +	{ 1400000000, 1, 41, 0, 0 },
> +	{ 1500000000, 1, 44, 0, 0 },
> +	{ 1600000000, 1, 47, 0, 0 },
> +	{}
> +};
> +
> +static const struct hsdk_pll_cfg hdmi_pll_cfg[] = {
> +	{ 297000000,  0, 21, 2, 0 },
> +	{ 540000000,  0, 19, 1, 0 },
> +	{ 594000000,  0, 21, 1, 0 },
> +	{}
> +};
> +
> +struct hsdk_pll_clk {
> +	struct clk_hw hw;
> +	void __iomem *regs;
> +	const struct hsdk_pll_cfg *pll_cfg;
> +	struct device *dev;
> +};
> +
> +static inline void hsdk_pll_write(struct hsdk_pll_clk *clk, u32 reg, u32 val)
> +{
> +	iowrite32(val, clk->regs + reg);
> +}
> +
> +static inline u32 hsdk_pll_read(struct hsdk_pll_clk *clk, u32 reg)
> +{
> +	return ioread32(clk->regs + reg);
> +}
> +
> +static inline void hsdk_pll_set_cfg(struct hsdk_pll_clk *clk,
> +				    const struct hsdk_pll_cfg *cfg)
> +{
> +	u32 val = 0;
> +
> +	/* Powerdown and Bypass bits should be cleared */
> +	val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
> +	val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
> +	val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
> +	val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
> +
> +	dev_dbg(clk->dev, "write configurarion: 0x%x", val);

Or just use %#x to add the 0x part.

> +
> +	hsdk_pll_write(clk, CGU_PLL_CTRL, val);
> +}
> +
> +static inline bool hsdk_pll_is_locked(struct hsdk_pll_clk *clk)
> +{
> +	u32 val;
> +
> +	val = hsdk_pll_read(clk, CGU_PLL_STATUS);
> +
> +	return (val & CGU_PLL_STATUS_LOCK) == CGU_PLL_STATUS_LOCK;
> +}
> +
> +static inline bool hsdk_pll_is_err(struct hsdk_pll_clk *clk)
> +{
> +	u32 val;
> +
> +	val = ;
> +
> +	return (val & CGU_PLL_STATUS_ERR) == CGU_PLL_STATUS_ERR;

Above two could be simplified to one line functions?

	return hsdk_pll_read(clk, CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR;

> +}
> +
> +static inline struct hsdk_pll_clk *to_hsdk_pll_clk(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct hsdk_pll_clk, hw);
> +}
> +
> +static unsigned long hsdk_pll_recalc_rate(struct clk_hw *hw,
> +					  unsigned long parent_rate)
> +{
> +	u32 val;
> +	u64 rate;
> +	u32 idiv, fbdiv, odiv;
> +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> +
> +	val = hsdk_pll_read(clk, CGU_PLL_CTRL);
> +
> +	dev_dbg(clk->dev, "current configurarion: 0x%x", val);
> +
> +	/* Check if PLL is disabled */
> +	if ((val & CGU_PLL_CTRL_PD) == CGU_PLL_CTRL_PD)
> +		return 0;
> +
> +	/* Check if PLL is bypassed */
> +	if ((val & CGU_PLL_CTRL_BYPASS) == CGU_PLL_CTRL_BYPASS)

These are single bits. Do we really need to check for anything
besides the and operation returning a non-zero value?

> +		return parent_rate;
> +
> +	/* input devider = reg.idiv + 1 */

s/devider/divider/

Maybe just drop these comments. They're just repeating the code.

> +	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >> CGU_PLL_CTRL_IDIV_SHIFT);
> +	/* fb devider = 2*(reg.fbdiv + 1) */

s/devider/divider/

> +	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >> CGU_PLL_CTRL_FBDIV_SHIFT));
> +	/* output devider = 2^(reg.odiv) */
> +	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT);
> +
> +	rate = (u64)parent_rate * fbdiv;
> +	do_div(rate, idiv * odiv);
> +
> +	return rate;
> +}
> +
> +static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> +				unsigned long *prate)
> +{
> +	int i;
> +	long best_rate;
> +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> +	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
> +
> +	if (pll_cfg[0].rate == 0)
> +		return -EINVAL;

This happens?

> +
> +	best_rate = pll_cfg[0].rate;
> +
> +	for (i = 1; pll_cfg[i].rate != 0; i++) {
> +		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))

Alright, rate is unsigned long, and best_rate is long. abs() does
the right thing here, but it makes me have to think twice if
best_rate can be negative and then this is a larger number, not a
smaller one. Can we make best_rate unsigned long in this
function?

> +			best_rate = pll_cfg[i].rate;
> +	}
> +
> +	dev_dbg(clk->dev, "chosen best rate: %lu", best_rate);
> +
> +	return best_rate;
> +}
[...]
> +
> +static void __init of_hsdk_pll_clk_setup(struct device_node *node)
> +{
> +	const char *parent_name;
> +	struct hsdk_pll_clk *pll_clk;
> +	struct clk_init_data init = { };
> +	int ret;
> +
> +	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
> +	if (!pll_clk)
> +		return;
> +
> +	pll_clk->regs = of_iomap(node, 0);
> +	if (!pll_clk->regs) {
> +		pr_err("failed to map pll registers\n");
> +		goto err_free_pll_clk;
> +	}
> +
> +	init.name = node->name;
> +	init.ops = &hsdk_pll_ops;
> +	parent_name = of_clk_get_parent_name(node, 0);
> +	init.parent_names = &parent_name;
> +	init.num_parents = parent_name ? 1 : 0;

of_clk_parent_fill(node, &init.parent_names, 1)?

> +	pll_clk->hw.init = &init;
> +	pll_clk->pll_cfg = asdt_pll_cfg;
> +
> +	ret = clk_hw_register(NULL, &pll_clk->hw);
> +	if (ret) {
> +		pr_err("failed to register %s clock\n", node->name);
> +		goto err_unmap_regs;
> +	}
> +
> +	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
> +	if (ret) {
> +		pr_err("failed to add hw provider for %s clock\n", node->name);
> +		goto err_unmap_regs;
> +	}
> +
> +	return;
> +
> +err_unmap_regs:
> +	iounmap(pll_clk->regs);
> +err_free_pll_clk:
> +	kfree(pll_clk);
> +}

Can you add a comment why this can't be probed via driver paths
here?

> +CLK_OF_DECLARE(hsdk_pll_clock, "snps,hsdk-core-pll-clock",
> +of_hsdk_pll_clk_setup);
> +
> +static const struct of_device_id hsdk_pll_clk_id[] = {
> +	{ .compatible = "snps,hsdk-gp-pll-clock", .data = &asdt_pll_cfg},
> +	{ .compatible = "snps,hsdk-hdmi-pll-clock", .data = &hdmi_pll_cfg},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, hsdk_pll_clk_id);
> +
> +static struct platform_driver hsdk_pll_clk_driver = {
> +	.driver = {
> +		.name = "hsdk-gp-pll-clock",
> +		.of_match_table = hsdk_pll_clk_id,
> +	},
> +	.probe = hsdk_pll_clk_probe,
> +	.remove = hsdk_pll_clk_remove,
> +};
> +builtin_platform_driver(hsdk_pll_clk_driver);
> +
> +MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
> +MODULE_DESCRIPTION("Synopsys HSDKv1 SDP Generic PLL Clock Driver");
> +MODULE_LICENSE("GPL v2");

These three lines should be removed, or Paul G. will find them
and delete them because the driver is never a module. Same goes
for the MODULE_DEVICE_TABLE line.
Eugeniy Paltsev Aug. 9, 2017, 4:43 p.m. UTC | #4 
Hi Stephen, 
thanks for respond, my comments are inlined below.

On Thu, 2017-08-03 at 18:53 -0700, Stephen Boyd wrote:
> On 07/14, Eugeniy Paltsev wrote:


> [...]

> > +	dev_dbg(clk->dev, "write configurarion: 0x%x", val);

> 

> Or just use %#x to add the 0x part.


Thanks, I don't know about this option.
> 

> [...]

>

> > +	/* input divider = reg.idiv + 1 */

> > +	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >>

> > CGU_PLL_CTRL_IDIV_SHIFT);

> > +	/* fb divider = 2*(reg.fbdiv + 1) */

> > +	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >>

> > CGU_PLL_CTRL_FBDIV_SHIFT));

> > +	/* output divider = 2^(reg.odiv) */

> > +	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >>

> > CGU_PLL_CTRL_ODIV_SHIFT);

>

> Maybe just drop these comments. They're just repeating the code.


Actually I would prefer to keep them, as "2^(reg.odiv)" is more 
human-readable then
"1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT)"

> > +

> > +	rate = (u64)parent_rate * fbdiv;

> > +	do_div(rate, idiv * odiv);

> > +

> > +	return rate;

> > +}

> > +

> > +static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long

> > rate,

> > +				unsigned long *prate)

> > +{

> > +	int i;

> > +	long best_rate;

> > +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);

> > +	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;

> > +

> > +	if (pll_cfg[0].rate == 0)

> > +		return -EINVAL;

> 

> This happens?


Only if we add bad hsdk_pll_cfg table. But it is quite cold code - we
change pll configuration quite rare, so maybe it's better to keep this
assert?

> > +

> > +	best_rate = pll_cfg[0].rate;

> > +

> > +	for (i = 1; pll_cfg[i].rate != 0; i++) {

> > +		if (abs(rate - pll_cfg[i].rate) < abs(rate -

> > best_rate))

> 

> Alright, rate is unsigned long, and best_rate is long. abs() does

> the right thing here, but it makes me have to think twice if

> best_rate can be negative and then this is a larger number, not a

> smaller one. Can we make best_rate unsigned long in this

> function?


Yes, we can.
Anyway it's a bit strange what rate is unsigned long and round_rate
return value is long.
-- 
 Eugeniy Paltsev
Stephen Boyd Aug. 9, 2017, 5:22 p.m. UTC | #5 
On 08/09, Eugeniy Paltsev wrote:
> On Thu, 2017-08-03 at 18:53 -0700, Stephen Boyd wrote:
> > On 07/14, Eugeniy Paltsev wrote:
> > > +	/* input divider = reg.idiv + 1 */
> > > +	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >>
> > > CGU_PLL_CTRL_IDIV_SHIFT);
> > > +	/* fb divider = 2*(reg.fbdiv + 1) */
> > > +	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >>
> > > CGU_PLL_CTRL_FBDIV_SHIFT));
> > > +	/* output divider = 2^(reg.odiv) */
> > > +	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >>
> > > CGU_PLL_CTRL_ODIV_SHIFT);
> >
> > Maybe just drop these comments. They're just repeating the code.
> 
> Actually I would prefer to keep them, as "2^(reg.odiv)" is more 
> human-readable then
> "1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT)"

Alright.

> 
> > > +
> > > +	rate = (u64)parent_rate * fbdiv;
> > > +	do_div(rate, idiv * odiv);
> > > +
> > > +	return rate;
> > > +}
> > > +
> > > +static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long
> > > rate,
> > > +				unsigned long *prate)
> > > +{
> > > +	int i;
> > > +	long best_rate;
> > > +	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
> > > +	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
> > > +
> > > +	if (pll_cfg[0].rate == 0)
> > > +		return -EINVAL;
> > 
> > This happens?
> 
> Only if we add bad hsdk_pll_cfg table. But it is quite cold code - we
> change pll configuration quite rare, so maybe it's better to keep this
> assert?

Can it be a BUILD_BUG_ON() somehow?
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
new file mode 100644
index 0000000..3580aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
@@ -0,0 +1,28 @@ 
+Binding for the HSDKv1 Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index b5ab794..96d0021 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12768,6 +12768,12 @@  F:	arch/arc/plat-axs10x
 F:	arch/arc/boot/dts/ax*
 F:	Documentation/devicetree/bindings/arc/axs10*
 
+SYNOPSYS ARC HSDKv1 SDP pll clock driver
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Supported
+F:	drivers/clk/clk-hsdk-pll.c
+F:	Documentation/devicetree/bindings/clock/snps,hsdkv1-pll-clock.txt
+
 SYSTEM CONFIGURATION (SYSCON)
 M:	Lee Jones <lee.jones@linaro.org>
 M:	Arnd Bergmann <arnd@arndb.de>
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 68ca2d9..198fc14 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -219,6 +219,13 @@  config COMMON_CLK_VC5
 	  This driver supports the IDT VersaClock5 programmable clock
 	  generator.
 
+config CLK_HSDK_V1
+	bool "PLL Driver for HSDKv1 platform"
+	depends on OF || COMPILE_TEST
+	---help---
+	  This driver supports the HSDKv1 core, system, ddr, tunnel and hdmi PLLs
+	  control.
+
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/imgtec/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index cd376b3..91e6cbd 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -27,6 +27,7 @@  obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
+obj-$(CONFIG_CLK_HSDK_V1)		+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s7x.o
 obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
diff --git a/drivers/clk/clk-hsdk-pll.c b/drivers/clk/clk-hsdk-pll.c
new file mode 100644
index 0000000..4e58e55
--- /dev/null
+++ b/drivers/clk/clk-hsdk-pll.c
@@ -0,0 +1,346 @@ 
+/*
+ * Synopsys HSDKv1 SDP Generic PLL clock driver
+ *
+ * Copyright (C) 2017 Synopsys
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#define CGU_PLL_CTRL	0x000 /* ARC PLL control register */
+#define CGU_PLL_STATUS	0x004 /* ARC PLL status register */
+#define CGU_PLL_FMEAS	0x008 /* ARC PLL frequency measurement register */
+#define CGU_PLL_MON	0x00C /* ARC PLL monitor register */
+
+#define CGU_PLL_CTRL_ODIV_SHIFT		2
+#define CGU_PLL_CTRL_IDIV_SHIFT		4
+#define CGU_PLL_CTRL_FBDIV_SHIFT	9
+#define CGU_PLL_CTRL_BAND_SHIFT		20
+
+#define CGU_PLL_CTRL_ODIV_MASK		GENMASK(3, CGU_PLL_CTRL_ODIV_SHIFT)
+#define CGU_PLL_CTRL_IDIV_MASK		GENMASK(8, CGU_PLL_CTRL_IDIV_SHIFT)
+#define CGU_PLL_CTRL_FBDIV_MASK		GENMASK(15, CGU_PLL_CTRL_FBDIV_SHIFT)
+
+#define CGU_PLL_CTRL_PD			BIT(0)
+#define CGU_PLL_CTRL_BYPASS		BIT(1)
+
+#define CGU_PLL_STATUS_LOCK		BIT(0)
+#define CGU_PLL_STATUS_ERR		BIT(1)
+
+#define HSDK_PLL_MAX_LOCK_TIME		100 /* 100 us */
+
+struct hsdk_pll_cfg {
+	u32 rate;
+	u32 idiv;
+	u32 fbdiv;
+	u32 odiv;
+	u32 band;
+};
+
+static const struct hsdk_pll_cfg asdt_pll_cfg[] = {
+	{ 100000000,  0, 11, 3, 0 },
+	{ 133000000,  0, 15, 3, 0 },
+	{ 200000000,  1, 47, 3, 0 },
+	{ 233000000,  1, 27, 2, 0 },
+	{ 300000000,  1, 35, 2, 0 },
+	{ 333000000,  1, 39, 2, 0 },
+	{ 400000000,  1, 47, 2, 0 },
+	{ 500000000,  0, 14, 1, 0 },
+	{ 600000000,  0, 17, 1, 0 },
+	{ 700000000,  0, 20, 1, 0 },
+	{ 800000000,  0, 23, 1, 0 },
+	{ 900000000,  1, 26, 0, 0 },
+	{ 1000000000, 1, 29, 0, 0 },
+	{ 1100000000, 1, 32, 0, 0 },
+	{ 1200000000, 1, 35, 0, 0 },
+	{ 1300000000, 1, 38, 0, 0 },
+	{ 1400000000, 1, 41, 0, 0 },
+	{ 1500000000, 1, 44, 0, 0 },
+	{ 1600000000, 1, 47, 0, 0 },
+	{}
+};
+
+static const struct hsdk_pll_cfg hdmi_pll_cfg[] = {
+	{ 297000000,  0, 21, 2, 0 },
+	{ 540000000,  0, 19, 1, 0 },
+	{ 594000000,  0, 21, 1, 0 },
+	{}
+};
+
+struct hsdk_pll_clk {
+	struct clk_hw hw;
+	void __iomem *regs;
+	const struct hsdk_pll_cfg *pll_cfg;
+	struct device *dev;
+};
+
+static inline void hsdk_pll_write(struct hsdk_pll_clk *clk, u32 reg, u32 val)
+{
+	iowrite32(val, clk->regs + reg);
+}
+
+static inline u32 hsdk_pll_read(struct hsdk_pll_clk *clk, u32 reg)
+{
+	return ioread32(clk->regs + reg);
+}
+
+static inline void hsdk_pll_set_cfg(struct hsdk_pll_clk *clk,
+				    const struct hsdk_pll_cfg *cfg)
+{
+	u32 val = 0;
+
+	/* Powerdown and Bypass bits should be cleared */
+	val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
+	val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
+	val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
+	val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
+
+	dev_dbg(clk->dev, "write configurarion: 0x%x", val);
+
+	hsdk_pll_write(clk, CGU_PLL_CTRL, val);
+}
+
+static inline bool hsdk_pll_is_locked(struct hsdk_pll_clk *clk)
+{
+	u32 val;
+
+	val = hsdk_pll_read(clk, CGU_PLL_STATUS);
+
+	return (val & CGU_PLL_STATUS_LOCK) == CGU_PLL_STATUS_LOCK;
+}
+
+static inline bool hsdk_pll_is_err(struct hsdk_pll_clk *clk)
+{
+	u32 val;
+
+	val = hsdk_pll_read(clk, CGU_PLL_STATUS);
+
+	return (val & CGU_PLL_STATUS_ERR) == CGU_PLL_STATUS_ERR;
+}
+
+static inline struct hsdk_pll_clk *to_hsdk_pll_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct hsdk_pll_clk, hw);
+}
+
+static unsigned long hsdk_pll_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	u32 val;
+	u64 rate;
+	u32 idiv, fbdiv, odiv;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+
+	val = hsdk_pll_read(clk, CGU_PLL_CTRL);
+
+	dev_dbg(clk->dev, "current configurarion: 0x%x", val);
+
+	/* Check if PLL is disabled */
+	if ((val & CGU_PLL_CTRL_PD) == CGU_PLL_CTRL_PD)
+		return 0;
+
+	/* Check if PLL is bypassed */
+	if ((val & CGU_PLL_CTRL_BYPASS) == CGU_PLL_CTRL_BYPASS)
+		return parent_rate;
+
+	/* input devider = reg.idiv + 1 */
+	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >> CGU_PLL_CTRL_IDIV_SHIFT);
+	/* fb devider = 2*(reg.fbdiv + 1) */
+	fbdiv = 2 * (1 + ((val & CGU_PLL_CTRL_FBDIV_MASK) >> CGU_PLL_CTRL_FBDIV_SHIFT));
+	/* output devider = 2^(reg.odiv) */
+	odiv = 1 << ((val & CGU_PLL_CTRL_ODIV_MASK) >> CGU_PLL_CTRL_ODIV_SHIFT);
+
+	rate = (u64)parent_rate * fbdiv;
+	do_div(rate, idiv * odiv);
+
+	return rate;
+}
+
+static long hsdk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	int i;
+	long best_rate;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
+
+	if (pll_cfg[0].rate == 0)
+		return -EINVAL;
+
+	best_rate = pll_cfg[0].rate;
+
+	for (i = 1; pll_cfg[i].rate != 0; i++) {
+		if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate))
+			best_rate = pll_cfg[i].rate;
+	}
+
+	dev_dbg(clk->dev, "chosen best rate: %lu", best_rate);
+
+	return best_rate;
+}
+
+static int hsdk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	int i;
+	struct hsdk_pll_clk *clk = to_hsdk_pll_clk(hw);
+	const struct hsdk_pll_cfg *pll_cfg = clk->pll_cfg;
+
+	for (i = 0; pll_cfg[i].rate != 0; i++) {
+		if (pll_cfg[i].rate == rate) {
+			hsdk_pll_set_cfg(clk, &pll_cfg[i]);
+
+			/*
+			 * Wait until CGU relocks and check error status.
+			 * If after timeout CGU is unlocked yet return error.
+			 */
+			udelay(HSDK_PLL_MAX_LOCK_TIME);
+			if (!hsdk_pll_is_locked(clk))
+				return -ETIMEDOUT;
+
+			if (hsdk_pll_is_err(clk))
+				return -EINVAL;
+
+			return 0;
+		}
+	}
+
+	dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
+			parent_rate);
+
+	return -EINVAL;
+}
+
+static const struct clk_ops hsdk_pll_ops = {
+	.recalc_rate = hsdk_pll_recalc_rate,
+	.round_rate = hsdk_pll_round_rate,
+	.set_rate = hsdk_pll_set_rate,
+};
+
+static int hsdk_pll_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const char *parent_name;
+	struct hsdk_pll_clk *pll_clk;
+	struct resource *mem;
+	struct clk_init_data init = { };
+	int ret;
+
+	pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pll_clk->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(pll_clk->regs))
+		return PTR_ERR(pll_clk->regs);
+
+	init.name = dev->of_node->name;
+	init.ops = &hsdk_pll_ops;
+	parent_name = of_clk_get_parent_name(dev->of_node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	pll_clk->hw.init = &init;
+	pll_clk->dev = dev;
+	pll_clk->pll_cfg = of_device_get_match_data(dev);
+
+	if (!pll_clk->pll_cfg) {
+		dev_err(dev, "No OF match data provided\n");
+		return -EINVAL;
+	}
+
+	ret = devm_clk_hw_register(dev, &pll_clk->hw);
+	if (ret) {
+		dev_err(dev, "failed to register %s clock\n", init.name);
+		return ret;
+	}
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+			&pll_clk->hw);
+}
+
+static int hsdk_pll_clk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static void __init of_hsdk_pll_clk_setup(struct device_node *node)
+{
+	const char *parent_name;
+	struct hsdk_pll_clk *pll_clk;
+	struct clk_init_data init = { };
+	int ret;
+
+	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+	if (!pll_clk)
+		return;
+
+	pll_clk->regs = of_iomap(node, 0);
+	if (!pll_clk->regs) {
+		pr_err("failed to map pll registers\n");
+		goto err_free_pll_clk;
+	}
+
+	init.name = node->name;
+	init.ops = &hsdk_pll_ops;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = parent_name ? 1 : 0;
+	pll_clk->hw.init = &init;
+	pll_clk->pll_cfg = asdt_pll_cfg;
+
+	ret = clk_hw_register(NULL, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to register %s clock\n", node->name);
+		goto err_unmap_regs;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw);
+	if (ret) {
+		pr_err("failed to add hw provider for %s clock\n", node->name);
+		goto err_unmap_regs;
+	}
+
+	return;
+
+err_unmap_regs:
+	iounmap(pll_clk->regs);
+err_free_pll_clk:
+	kfree(pll_clk);
+}
+CLK_OF_DECLARE(hsdk_pll_clock, "snps,hsdk-core-pll-clock",
+of_hsdk_pll_clk_setup);
+
+static const struct of_device_id hsdk_pll_clk_id[] = {
+	{ .compatible = "snps,hsdk-gp-pll-clock", .data = &asdt_pll_cfg},
+	{ .compatible = "snps,hsdk-hdmi-pll-clock", .data = &hdmi_pll_cfg},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, hsdk_pll_clk_id);
+
+static struct platform_driver hsdk_pll_clk_driver = {
+	.driver = {
+		.name = "hsdk-gp-pll-clock",
+		.of_match_table = hsdk_pll_clk_id,
+	},
+	.probe = hsdk_pll_clk_probe,
+	.remove = hsdk_pll_clk_remove,
+};
+builtin_platform_driver(hsdk_pll_clk_driver);
+
+MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys HSDKv1 SDP Generic PLL Clock Driver");
+MODULE_LICENSE("GPL v2");