| Message ID | 1501628893-28492-1-git-send-email-fkan@apm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Tue, 1 Aug 2017 16:08:13 -0700 Feng Kan <fkan@apm.com> wrote: > The APM X-Gene PCIe root port does not support ACS at this point. > However, the hw provides isolation and source validation through > the SMMU. The stream ID generated by the PCIe ports contain both > the BDF as well as the port ID in its 3 most significant bits. > Turn on ACS but disable all the peer to peer features. > > Signed-off-by: Feng Kan <fkan@apm.com> > --- > V4 Change: Remove TB & TD flags from ACS mask > V3 Change: Add comment regarding unique port id in stream ID > V2 Change: Move XGene ACS quirk to unique XGene function > > drivers/pci/quirks.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) Reviewed-by: Alex Williamson <alex.williamson@redhat.com> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 085fb78..22343b3 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -4120,6 +4120,18 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) > return acs_flags ? 0 : 1; > } > > +static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) > +{ > + /* > + * XGene root matching this quirk do not allow peer-to-peer > + * transactions with others, allowing masking out these bits as if they > + * were unimplemented in the ACS capability. > + */ > + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); > + > + return acs_flags ? 0 : 1; > +} > + > /* > * Many Intel PCH root ports do provide ACS-like features to disable peer > * transactions and validate bus numbers in requests, but do not provide an > @@ -4368,6 +4380,8 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) > { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ > /* Cavium ThunderX */ > { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, > + /* APM XGene */ > + { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, > { 0 } > }; >
+ Adding Bjorn Sorry for top post, we are looking to pull this into the latest REL7.4 release. Would like the maintainer to take a look. Thanks On Tue, Aug 1, 2017 at 4:15 PM, Alex Williamson <alex.williamson@redhat.com> wrote: > On Tue, 1 Aug 2017 16:08:13 -0700 > Feng Kan <fkan@apm.com> wrote: > >> The APM X-Gene PCIe root port does not support ACS at this point. >> However, the hw provides isolation and source validation through >> the SMMU. The stream ID generated by the PCIe ports contain both >> the BDF as well as the port ID in its 3 most significant bits. >> Turn on ACS but disable all the peer to peer features. >> >> Signed-off-by: Feng Kan <fkan@apm.com> >> --- >> V4 Change: Remove TB & TD flags from ACS mask >> V3 Change: Add comment regarding unique port id in stream ID >> V2 Change: Move XGene ACS quirk to unique XGene function >> >> drivers/pci/quirks.c | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) > > > Reviewed-by: Alex Williamson <alex.williamson@redhat.com> > > >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c >> index 085fb78..22343b3 100644 >> --- a/drivers/pci/quirks.c >> +++ b/drivers/pci/quirks.c >> @@ -4120,6 +4120,18 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) >> return acs_flags ? 0 : 1; >> } >> >> +static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) >> +{ >> + /* >> + * XGene root matching this quirk do not allow peer-to-peer >> + * transactions with others, allowing masking out these bits as if they >> + * were unimplemented in the ACS capability. >> + */ >> + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); >> + >> + return acs_flags ? 0 : 1; >> +} >> + >> /* >> * Many Intel PCH root ports do provide ACS-like features to disable peer >> * transactions and validate bus numbers in requests, but do not provide an >> @@ -4368,6 +4380,8 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) >> { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ >> /* Cavium ThunderX */ >> { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, >> + /* APM XGene */ >> + { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, >> { 0 } >> }; >> >
[+cc Tanmay] On Tue, Aug 01, 2017 at 04:08:13PM -0700, Feng Kan wrote: > The APM X-Gene PCIe root port does not support ACS at this point. > However, the hw provides isolation and source validation through > the SMMU. The stream ID generated by the PCIe ports contain both > the BDF as well as the port ID in its 3 most significant bits. > Turn on ACS but disable all the peer to peer features. > > Signed-off-by: Feng Kan <fkan@apm.com> This should really have Tanmay's ack (cc'd). Provisionally applied to pci/host-xgene for v4.14. > --- > V4 Change: Remove TB & TD flags from ACS mask > V3 Change: Add comment regarding unique port id in stream ID > V2 Change: Move XGene ACS quirk to unique XGene function > > drivers/pci/quirks.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 085fb78..22343b3 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -4120,6 +4120,18 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) > return acs_flags ? 0 : 1; > } > > +static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) > +{ > + /* > + * XGene root matching this quirk do not allow peer-to-peer > + * transactions with others, allowing masking out these bits as if they > + * were unimplemented in the ACS capability. > + */ > + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); > + > + return acs_flags ? 0 : 1; > +} > + > /* > * Many Intel PCH root ports do provide ACS-like features to disable peer > * transactions and validate bus numbers in requests, but do not provide an > @@ -4368,6 +4380,8 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) > { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ > /* Cavium ThunderX */ > { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, > + /* APM XGene */ > + { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, > { 0 } > }; > > -- > 1.8.3.1 >
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 085fb78..22343b3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4120,6 +4120,18 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) return acs_flags ? 0 : 1; } +static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) +{ + /* + * XGene root matching this quirk do not allow peer-to-peer + * transactions with others, allowing masking out these bits as if they + * were unimplemented in the ACS capability. + */ + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); + + return acs_flags ? 0 : 1; +} + /* * Many Intel PCH root ports do provide ACS-like features to disable peer * transactions and validate bus numbers in requests, but do not provide an @@ -4368,6 +4380,8 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ /* Cavium ThunderX */ { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, + /* APM XGene */ + { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, { 0 } };
The APM X-Gene PCIe root port does not support ACS at this point. However, the hw provides isolation and source validation through the SMMU. The stream ID generated by the PCIe ports contain both the BDF as well as the port ID in its 3 most significant bits. Turn on ACS but disable all the peer to peer features. Signed-off-by: Feng Kan <fkan@apm.com> --- V4 Change: Remove TB & TD flags from ACS mask V3 Change: Add comment regarding unique port id in stream ID V2 Change: Move XGene ACS quirk to unique XGene function drivers/pci/quirks.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)