| Message ID | 20170803001315.GF32020@bbox (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
[ adding Tim and Ying who have also been looking at swap optimization and rw_page interactions ] On Wed, Aug 2, 2017 at 5:13 PM, Minchan Kim <minchan@kernel.org> wrote: > Hi Ross, > > On Wed, Aug 02, 2017 at 04:13:59PM -0600, Ross Zwisler wrote: >> On Fri, Jul 28, 2017 at 10:31:43AM -0700, Matthew Wilcox wrote: >> > On Fri, Jul 28, 2017 at 10:56:01AM -0600, Ross Zwisler wrote: >> > > Dan Williams and Christoph Hellwig have recently expressed doubt about >> > > whether the rw_page() interface made sense for synchronous memory drivers >> > > [1][2]. It's unclear whether this interface has any performance benefit >> > > for these drivers, but as we continue to fix bugs it is clear that it does >> > > have a maintenance burden. This series removes the rw_page() >> > > implementations in brd, pmem and btt to relieve this burden. >> > >> > Why don't you measure whether it has performance benefits? I don't >> > understand why zram would see performance benefits and not other drivers. >> > If it's going to be removed, then the whole interface should be removed, >> > not just have the implementations removed from some drivers. >> >> Okay, I've run a bunch of performance tests with the PMEM and with BTT entry >> points for rw_pages() in a swap workload, and in all cases I do see an >> improvement over the code when rw_pages() is removed. Here are the results >> from my random lab box: >> >> Average latency of swap_writepage() >> +------+------------+---------+-------------+ >> | | no rw_page | rw_page | Improvement | >> +-------------------------------------------+ >> | PMEM | 5.0 us | 4.7 us | 6% | >> +-------------------------------------------+ >> | BTT | 6.8 us | 6.1 us | 10% | >> +------+------------+---------+-------------+ >> >> Average latency of swap_readpage() >> +------+------------+---------+-------------+ >> | | no rw_page | rw_page | Improvement | >> +-------------------------------------------+ >> | PMEM | 3.3 us | 2.9 us | 12% | >> +-------------------------------------------+ >> | BTT | 3.7 us | 3.4 us | 8% | >> +------+------------+---------+-------------+ >> >> The workload was pmbench, a memory benchmark, run on a system where I had >> severely restricted the amount of memory in the system with the 'mem' kernel >> command line parameter. The benchmark was set up to test more memory than I >> allowed the OS to have so it spilled over into swap. >> >> The PMEM or BTT device was set up as my swap device, and during the test I got >> a few hundred thousand samples of each of swap_writepage() and >> swap_writepage(). The PMEM/BTT device was just memory reserved with the >> memmap kernel command line parameter. >> >> Thanks, Matthew, for asking for performance data. It looks like removing this >> code would have been a mistake. > > By suggestion of Christoph Hellwig, I made a quick patch which does IO without > dynamic bio allocation for swap IO. Actually, it's not formal patch to be > worth to send mainline yet but I believe it's enough to test the improvement. > > Could you test patchset on pmem and btt without rw_page? > > For working the patch, block drivers need to declare it's synchronous IO > device via BDI_CAP_SYNC but if it's hard, you can just make every swap IO > comes from (sis->flags & SWP_SYNC_IO) with removing condition check > > if (!(sis->flags & SWP_SYNC_IO)) in swap_[read|write]page. > > Patchset is based on 4.13-rc3. > > > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c > index 856d5dc02451..b1c5e9bf3ad5 100644 > --- a/drivers/block/zram/zram_drv.c > +++ b/drivers/block/zram/zram_drv.c > @@ -125,9 +125,9 @@ static inline bool is_partial_io(struct bio_vec *bvec) > static void zram_revalidate_disk(struct zram *zram) > { > revalidate_disk(zram->disk); > - /* revalidate_disk reset the BDI_CAP_STABLE_WRITES so set again */ > + /* revalidate_disk reset the BDI capability so set again */ > zram->disk->queue->backing_dev_info->capabilities |= > - BDI_CAP_STABLE_WRITES; > + (BDI_CAP_STABLE_WRITES|BDI_CAP_SYNC); > } > > /* > @@ -1096,7 +1096,7 @@ static int zram_open(struct block_device *bdev, fmode_t mode) > static const struct block_device_operations zram_devops = { > .open = zram_open, > .swap_slot_free_notify = zram_slot_free_notify, > - .rw_page = zram_rw_page, > + // .rw_page = zram_rw_page, > .owner = THIS_MODULE > }; > > diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h > index 854e1bdd0b2a..05eee145d964 100644 > --- a/include/linux/backing-dev.h > +++ b/include/linux/backing-dev.h > @@ -130,6 +130,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio); > #define BDI_CAP_STABLE_WRITES 0x00000008 > #define BDI_CAP_STRICTLIMIT 0x00000010 > #define BDI_CAP_CGROUP_WRITEBACK 0x00000020 > +#define BDI_CAP_SYNC 0x00000040 > > #define BDI_CAP_NO_ACCT_AND_WRITEBACK \ > (BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB) > @@ -177,6 +178,11 @@ long wait_iff_congested(struct pglist_data *pgdat, int sync, long timeout); > int pdflush_proc_obsolete(struct ctl_table *table, int write, > void __user *buffer, size_t *lenp, loff_t *ppos); > > +static inline bool bdi_cap_sync_io_required(struct backing_dev_info *bdi) > +{ > + return bdi->capabilities & BDI_CAP_SYNC; > +} > + > static inline bool bdi_cap_stable_pages_required(struct backing_dev_info *bdi) > { > return bdi->capabilities & BDI_CAP_STABLE_WRITES; > diff --git a/include/linux/swap.h b/include/linux/swap.h > index d83d28e53e62..86457dbfd300 100644 > --- a/include/linux/swap.h > +++ b/include/linux/swap.h > @@ -152,8 +152,9 @@ enum { > SWP_AREA_DISCARD = (1 << 8), /* single-time swap area discards */ > SWP_PAGE_DISCARD = (1 << 9), /* freed swap page-cluster discards */ > SWP_STABLE_WRITES = (1 << 10), /* no overwrite PG_writeback pages */ > + SWP_SYNC_IO = (1 << 11), > /* add others here before... */ > - SWP_SCANNING = (1 << 11), /* refcount in scan_swap_map */ > + SWP_SCANNING = (1 << 12), /* refcount in scan_swap_map */ > }; > > #define SWAP_CLUSTER_MAX 32UL > diff --git a/mm/page_io.c b/mm/page_io.c > index b6c4ac388209..2c85e5182364 100644 > --- a/mm/page_io.c > +++ b/mm/page_io.c > @@ -263,7 +263,6 @@ static sector_t swap_page_sector(struct page *page) > int __swap_writepage(struct page *page, struct writeback_control *wbc, > bio_end_io_t end_write_func) > { > - struct bio *bio; > int ret; > struct swap_info_struct *sis = page_swap_info(page); > > @@ -316,25 +315,44 @@ int __swap_writepage(struct page *page, struct writeback_control *wbc, > } > > ret = 0; > - bio = get_swap_bio(GFP_NOIO, page, end_write_func); > - if (bio == NULL) { > - set_page_dirty(page); > + count_vm_event(PSWPOUT); > + > + if (!(sis->flags & SWP_SYNC_IO)) { > + struct bio *bio; > + > + bio = get_swap_bio(GFP_NOIO, page, end_write_func); > + if (bio == NULL) { > + set_page_dirty(page); > + unlock_page(page); > + ret = -ENOMEM; > + goto out; > + } > + bio->bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); > + set_page_writeback(page); > unlock_page(page); > - ret = -ENOMEM; > - goto out; > + submit_bio(bio); > + } else { > + struct bio bio; > + struct bio_vec bvec; > + > + bio_init(&bio, &bvec, 1); > + > + bio.bi_iter.bi_sector = map_swap_page(page, &bio.bi_bdev); > + bio.bi_iter.bi_sector <<= PAGE_SHIFT - 9; > + bio.bi_end_io = end_write_func; > + bio_add_page(&bio, page, PAGE_SIZE, 0); > + bio.bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); > + bio_get(&bio); > + set_page_writeback(page); > + unlock_page(page); > + submit_bio(&bio); > } > - bio->bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); > - count_vm_event(PSWPOUT); > - set_page_writeback(page); > - unlock_page(page); > - submit_bio(bio); > out: > return ret; > } > > int swap_readpage(struct page *page, bool do_poll) > { > - struct bio *bio; > int ret = 0; > struct swap_info_struct *sis = page_swap_info(page); > blk_qc_t qc; > @@ -371,29 +389,49 @@ int swap_readpage(struct page *page, bool do_poll) > } > > ret = 0; > - bio = get_swap_bio(GFP_KERNEL, page, end_swap_bio_read); > - if (bio == NULL) { > - unlock_page(page); > - ret = -ENOMEM; > - goto out; > - } > - bdev = bio->bi_bdev; > - bio->bi_private = current; > - bio_set_op_attrs(bio, REQ_OP_READ, 0); > - count_vm_event(PSWPIN); > - bio_get(bio); > - qc = submit_bio(bio); > - while (do_poll) { > - set_current_state(TASK_UNINTERRUPTIBLE); > - if (!READ_ONCE(bio->bi_private)) > - break; > - > - if (!blk_mq_poll(bdev_get_queue(bdev), qc)) > - break; > + if (!(sis->flags & SWP_SYNC_IO)) { > + struct bio *bio; > + > + bio = get_swap_bio(GFP_KERNEL, page, end_swap_bio_read); > + if (bio == NULL) { > + unlock_page(page); > + ret = -ENOMEM; > + goto out; > + } > + bdev = bio->bi_bdev; > + bio->bi_private = current; > + bio_set_op_attrs(bio, REQ_OP_READ, 0); > + bio_get(bio); > + qc = submit_bio(bio); > + while (do_poll) { > + set_current_state(TASK_UNINTERRUPTIBLE); > + if (!READ_ONCE(bio->bi_private)) > + break; > + > + if (!blk_mq_poll(bdev_get_queue(bdev), qc)) > + break; > + } > + __set_current_state(TASK_RUNNING); > + bio_put(bio); > + } else { > + struct bio bio; > + struct bio_vec bvec; > + > + bio_init(&bio, &bvec, 1); > + > + bio.bi_iter.bi_sector = map_swap_page(page, &bio.bi_bdev); > + bio.bi_iter.bi_sector <<= PAGE_SHIFT - 9; > + bio.bi_end_io = end_swap_bio_read; > + bio_add_page(&bio, page, PAGE_SIZE, 0); > + bio.bi_private = current; > + BUG_ON(bio.bi_iter.bi_size != PAGE_SIZE); > + bio_set_op_attrs(&bio, REQ_OP_READ, 0); > + /* end_swap_bio_read calls bio_put unconditionally */ > + bio_get(&bio); > + submit_bio(&bio); > } > - __set_current_state(TASK_RUNNING); > - bio_put(bio); > > + count_vm_event(PSWPIN); > out: > return ret; > } > diff --git a/mm/swapfile.c b/mm/swapfile.c > index 6ba4aab2db0b..855d50eeeaf9 100644 > --- a/mm/swapfile.c > +++ b/mm/swapfile.c > @@ -2931,6 +2931,9 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) > if (bdi_cap_stable_pages_required(inode_to_bdi(inode))) > p->flags |= SWP_STABLE_WRITES; > > + if (bdi_cap_sync_io_required(inode_to_bdi(inode))) > + p->flags |= SWP_SYNC_IO; > + > if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) { > int cpu; > unsigned long ci, nr_cluster;
FYI, for the read side we should use the on-stack bio unconditionally, as it will always be a win (or not show up at all).
On Thu, Aug 03, 2017 at 09:13:15AM +0900, Minchan Kim wrote: > Hi Ross, > > On Wed, Aug 02, 2017 at 04:13:59PM -0600, Ross Zwisler wrote: > > On Fri, Jul 28, 2017 at 10:31:43AM -0700, Matthew Wilcox wrote: > > > On Fri, Jul 28, 2017 at 10:56:01AM -0600, Ross Zwisler wrote: > > > > Dan Williams and Christoph Hellwig have recently expressed doubt about > > > > whether the rw_page() interface made sense for synchronous memory drivers > > > > [1][2]. It's unclear whether this interface has any performance benefit > > > > for these drivers, but as we continue to fix bugs it is clear that it does > > > > have a maintenance burden. This series removes the rw_page() > > > > implementations in brd, pmem and btt to relieve this burden. > > > > > > Why don't you measure whether it has performance benefits? I don't > > > understand why zram would see performance benefits and not other drivers. > > > If it's going to be removed, then the whole interface should be removed, > > > not just have the implementations removed from some drivers. > > > > Okay, I've run a bunch of performance tests with the PMEM and with BTT entry > > points for rw_pages() in a swap workload, and in all cases I do see an > > improvement over the code when rw_pages() is removed. Here are the results > > from my random lab box: > > > > Average latency of swap_writepage() > > +------+------------+---------+-------------+ > > | | no rw_page | rw_page | Improvement | > > +-------------------------------------------+ > > | PMEM | 5.0 us | 4.7 us | 6% | > > +-------------------------------------------+ > > | BTT | 6.8 us | 6.1 us | 10% | > > +------+------------+---------+-------------+ > > > > Average latency of swap_readpage() > > +------+------------+---------+-------------+ > > | | no rw_page | rw_page | Improvement | > > +-------------------------------------------+ > > | PMEM | 3.3 us | 2.9 us | 12% | > > +-------------------------------------------+ > > | BTT | 3.7 us | 3.4 us | 8% | > > +------+------------+---------+-------------+ > > > > The workload was pmbench, a memory benchmark, run on a system where I had > > severely restricted the amount of memory in the system with the 'mem' kernel > > command line parameter. The benchmark was set up to test more memory than I > > allowed the OS to have so it spilled over into swap. > > > > The PMEM or BTT device was set up as my swap device, and during the test I got > > a few hundred thousand samples of each of swap_writepage() and > > swap_writepage(). The PMEM/BTT device was just memory reserved with the > > memmap kernel command line parameter. > > > > Thanks, Matthew, for asking for performance data. It looks like removing this > > code would have been a mistake. > > By suggestion of Christoph Hellwig, I made a quick patch which does IO without > dynamic bio allocation for swap IO. Actually, it's not formal patch to be > worth to send mainline yet but I believe it's enough to test the improvement. > > Could you test patchset on pmem and btt without rw_page? > > For working the patch, block drivers need to declare it's synchronous IO > device via BDI_CAP_SYNC but if it's hard, you can just make every swap IO > comes from (sis->flags & SWP_SYNC_IO) with removing condition check > > if (!(sis->flags & SWP_SYNC_IO)) in swap_[read|write]page. > > Patchset is based on 4.13-rc3. Thanks for the patch, here are the updated results from my test box: Average latency of swap_writepage() +------+------------+---------+---------+ | | no rw_page | minchan | rw_page | +---------------------------------------- | PMEM | 5.0 us | 4.98 us | 4.7 us | +---------------------------------------- | BTT | 6.8 us | 6.3 us | 6.1 us | +------+------------+---------+---------+ Average latency of swap_readpage() +------+------------+---------+---------+ | | no rw_page | minchan | rw_page | +---------------------------------------- | PMEM | 3.3 us | 3.27 us | 2.9 us | +---------------------------------------- | BTT | 3.7 us | 3.44 us | 3.4 us | +------+------------+---------+---------+ I've added another digit in precision in some cases to help differentiate the various results. In all cases your patches did perform better than with the regularly allocated BIO, but again for all cases the rw_page() path was the fastest, even if only marginally. - Ross
On 08/03/2017 03:13 PM, Ross Zwisler wrote: > On Thu, Aug 03, 2017 at 09:13:15AM +0900, Minchan Kim wrote: >> Hi Ross, >> >> On Wed, Aug 02, 2017 at 04:13:59PM -0600, Ross Zwisler wrote: >>> On Fri, Jul 28, 2017 at 10:31:43AM -0700, Matthew Wilcox wrote: >>>> On Fri, Jul 28, 2017 at 10:56:01AM -0600, Ross Zwisler wrote: >>>>> Dan Williams and Christoph Hellwig have recently expressed doubt about >>>>> whether the rw_page() interface made sense for synchronous memory drivers >>>>> [1][2]. It's unclear whether this interface has any performance benefit >>>>> for these drivers, but as we continue to fix bugs it is clear that it does >>>>> have a maintenance burden. This series removes the rw_page() >>>>> implementations in brd, pmem and btt to relieve this burden. >>>> >>>> Why don't you measure whether it has performance benefits? I don't >>>> understand why zram would see performance benefits and not other drivers. >>>> If it's going to be removed, then the whole interface should be removed, >>>> not just have the implementations removed from some drivers. >>> >>> Okay, I've run a bunch of performance tests with the PMEM and with BTT entry >>> points for rw_pages() in a swap workload, and in all cases I do see an >>> improvement over the code when rw_pages() is removed. Here are the results >>> from my random lab box: >>> >>> Average latency of swap_writepage() >>> +------+------------+---------+-------------+ >>> | | no rw_page | rw_page | Improvement | >>> +-------------------------------------------+ >>> | PMEM | 5.0 us | 4.7 us | 6% | >>> +-------------------------------------------+ >>> | BTT | 6.8 us | 6.1 us | 10% | >>> +------+------------+---------+-------------+ >>> >>> Average latency of swap_readpage() >>> +------+------------+---------+-------------+ >>> | | no rw_page | rw_page | Improvement | >>> +-------------------------------------------+ >>> | PMEM | 3.3 us | 2.9 us | 12% | >>> +-------------------------------------------+ >>> | BTT | 3.7 us | 3.4 us | 8% | >>> +------+------------+---------+-------------+ >>> >>> The workload was pmbench, a memory benchmark, run on a system where I had >>> severely restricted the amount of memory in the system with the 'mem' kernel >>> command line parameter. The benchmark was set up to test more memory than I >>> allowed the OS to have so it spilled over into swap. >>> >>> The PMEM or BTT device was set up as my swap device, and during the test I got >>> a few hundred thousand samples of each of swap_writepage() and >>> swap_writepage(). The PMEM/BTT device was just memory reserved with the >>> memmap kernel command line parameter. >>> >>> Thanks, Matthew, for asking for performance data. It looks like removing this >>> code would have been a mistake. >> >> By suggestion of Christoph Hellwig, I made a quick patch which does IO without >> dynamic bio allocation for swap IO. Actually, it's not formal patch to be >> worth to send mainline yet but I believe it's enough to test the improvement. >> >> Could you test patchset on pmem and btt without rw_page? >> >> For working the patch, block drivers need to declare it's synchronous IO >> device via BDI_CAP_SYNC but if it's hard, you can just make every swap IO >> comes from (sis->flags & SWP_SYNC_IO) with removing condition check >> >> if (!(sis->flags & SWP_SYNC_IO)) in swap_[read|write]page. >> >> Patchset is based on 4.13-rc3. > > Thanks for the patch, here are the updated results from my test box: > > Average latency of swap_writepage() > +------+------------+---------+---------+ > | | no rw_page | minchan | rw_page | > +---------------------------------------- > | PMEM | 5.0 us | 4.98 us | 4.7 us | > +---------------------------------------- > | BTT | 6.8 us | 6.3 us | 6.1 us | > +------+------------+---------+---------+ > > Average latency of swap_readpage() > +------+------------+---------+---------+ > | | no rw_page | minchan | rw_page | > +---------------------------------------- > | PMEM | 3.3 us | 3.27 us | 2.9 us | > +---------------------------------------- > | BTT | 3.7 us | 3.44 us | 3.4 us | > +------+------------+---------+---------+ > > I've added another digit in precision in some cases to help differentiate the > various results. > > In all cases your patches did perform better than with the regularly allocated > BIO, but again for all cases the rw_page() path was the fastest, even if only > marginally. IMHO, the win needs to be pretty substantial to justify keeping a parallel read/write path in the kernel. The recent work of making O_DIRECT faster is exactly the same as what Minchan did here for sync IO. I would greatly prefer one fast path, instead of one fast and one that's just a little faster for some things. It's much better to get everyone behind one path/stack, and make that as fast as it can be.
On Thu, Aug 03, 2017 at 10:05:44AM +0200, Christoph Hellwig wrote: > FYI, for the read side we should use the on-stack bio unconditionally, > as it will always be a win (or not show up at all). Think about readahead. Unconditional on-stack bio to read around pages with faulted address will cause latency peek. So, I want to use that synchronous IO only if device says "Hey, I'm a synchronous".
On Thu, Aug 03, 2017 at 03:13:35PM -0600, Ross Zwisler wrote: > On Thu, Aug 03, 2017 at 09:13:15AM +0900, Minchan Kim wrote: > > Hi Ross, > > > > On Wed, Aug 02, 2017 at 04:13:59PM -0600, Ross Zwisler wrote: > > > On Fri, Jul 28, 2017 at 10:31:43AM -0700, Matthew Wilcox wrote: > > > > On Fri, Jul 28, 2017 at 10:56:01AM -0600, Ross Zwisler wrote: > > > > > Dan Williams and Christoph Hellwig have recently expressed doubt about > > > > > whether the rw_page() interface made sense for synchronous memory drivers > > > > > [1][2]. It's unclear whether this interface has any performance benefit > > > > > for these drivers, but as we continue to fix bugs it is clear that it does > > > > > have a maintenance burden. This series removes the rw_page() > > > > > implementations in brd, pmem and btt to relieve this burden. > > > > > > > > Why don't you measure whether it has performance benefits? I don't > > > > understand why zram would see performance benefits and not other drivers. > > > > If it's going to be removed, then the whole interface should be removed, > > > > not just have the implementations removed from some drivers. > > > > > > Okay, I've run a bunch of performance tests with the PMEM and with BTT entry > > > points for rw_pages() in a swap workload, and in all cases I do see an > > > improvement over the code when rw_pages() is removed. Here are the results > > > from my random lab box: > > > > > > Average latency of swap_writepage() > > > +------+------------+---------+-------------+ > > > | | no rw_page | rw_page | Improvement | > > > +-------------------------------------------+ > > > | PMEM | 5.0 us | 4.7 us | 6% | > > > +-------------------------------------------+ > > > | BTT | 6.8 us | 6.1 us | 10% | > > > +------+------------+---------+-------------+ > > > > > > Average latency of swap_readpage() > > > +------+------------+---------+-------------+ > > > | | no rw_page | rw_page | Improvement | > > > +-------------------------------------------+ > > > | PMEM | 3.3 us | 2.9 us | 12% | > > > +-------------------------------------------+ > > > | BTT | 3.7 us | 3.4 us | 8% | > > > +------+------------+---------+-------------+ > > > > > > The workload was pmbench, a memory benchmark, run on a system where I had > > > severely restricted the amount of memory in the system with the 'mem' kernel > > > command line parameter. The benchmark was set up to test more memory than I > > > allowed the OS to have so it spilled over into swap. > > > > > > The PMEM or BTT device was set up as my swap device, and during the test I got > > > a few hundred thousand samples of each of swap_writepage() and > > > swap_writepage(). The PMEM/BTT device was just memory reserved with the > > > memmap kernel command line parameter. > > > > > > Thanks, Matthew, for asking for performance data. It looks like removing this > > > code would have been a mistake. > > > > By suggestion of Christoph Hellwig, I made a quick patch which does IO without > > dynamic bio allocation for swap IO. Actually, it's not formal patch to be > > worth to send mainline yet but I believe it's enough to test the improvement. > > > > Could you test patchset on pmem and btt without rw_page? > > > > For working the patch, block drivers need to declare it's synchronous IO > > device via BDI_CAP_SYNC but if it's hard, you can just make every swap IO > > comes from (sis->flags & SWP_SYNC_IO) with removing condition check > > > > if (!(sis->flags & SWP_SYNC_IO)) in swap_[read|write]page. > > > > Patchset is based on 4.13-rc3. > > Thanks for the patch, here are the updated results from my test box: > > Average latency of swap_writepage() > +------+------------+---------+---------+ > | | no rw_page | minchan | rw_page | > +---------------------------------------- > | PMEM | 5.0 us | 4.98 us | 4.7 us | > +---------------------------------------- > | BTT | 6.8 us | 6.3 us | 6.1 us | > +------+------------+---------+---------+ > > Average latency of swap_readpage() > +------+------------+---------+---------+ > | | no rw_page | minchan | rw_page | > +---------------------------------------- > | PMEM | 3.3 us | 3.27 us | 2.9 us | > +---------------------------------------- > | BTT | 3.7 us | 3.44 us | 3.4 us | > +------+------------+---------+---------+ > > I've added another digit in precision in some cases to help differentiate the > various results. > > In all cases your patches did perform better than with the regularly allocated > BIO, but again for all cases the rw_page() path was the fastest, even if only > marginally. Thanks for the testing. Your testing number is within noise level? I cannot understand why PMEM doesn't have enough gain while BTT is significant win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic allocation and mine and rw_page testing reduced it significantly. However, in no rw_page with pmem, there wasn't many cases to wait bio allocations due to the device is so fast so the number comes from purely the number of instructions has done. At a quick glance of bio init/submit, it's not trivial so indeed, i understand where the 12% enhancement comes from but I'm not sure it's really big difference in real practice at the cost of maintaince burden.
On Fri, Aug 04, 2017 at 12:54:41PM +0900, Minchan Kim wrote: > On Thu, Aug 03, 2017 at 03:13:35PM -0600, Ross Zwisler wrote: > > On Thu, Aug 03, 2017 at 09:13:15AM +0900, Minchan Kim wrote: > > > Hi Ross, > > > > > > On Wed, Aug 02, 2017 at 04:13:59PM -0600, Ross Zwisler wrote: > > > > On Fri, Jul 28, 2017 at 10:31:43AM -0700, Matthew Wilcox wrote: > > > > > On Fri, Jul 28, 2017 at 10:56:01AM -0600, Ross Zwisler wrote: > > > > > > Dan Williams and Christoph Hellwig have recently expressed doubt about > > > > > > whether the rw_page() interface made sense for synchronous memory drivers > > > > > > [1][2]. It's unclear whether this interface has any performance benefit > > > > > > for these drivers, but as we continue to fix bugs it is clear that it does > > > > > > have a maintenance burden. This series removes the rw_page() > > > > > > implementations in brd, pmem and btt to relieve this burden. > > > > > > > > > > Why don't you measure whether it has performance benefits? I don't > > > > > understand why zram would see performance benefits and not other drivers. > > > > > If it's going to be removed, then the whole interface should be removed, > > > > > not just have the implementations removed from some drivers. > > > > > > > > Okay, I've run a bunch of performance tests with the PMEM and with BTT entry > > > > points for rw_pages() in a swap workload, and in all cases I do see an > > > > improvement over the code when rw_pages() is removed. Here are the results > > > > from my random lab box: > > > > > > > > Average latency of swap_writepage() > > > > +------+------------+---------+-------------+ > > > > | | no rw_page | rw_page | Improvement | > > > > +-------------------------------------------+ > > > > | PMEM | 5.0 us | 4.7 us | 6% | > > > > +-------------------------------------------+ > > > > | BTT | 6.8 us | 6.1 us | 10% | > > > > +------+------------+---------+-------------+ > > > > > > > > Average latency of swap_readpage() > > > > +------+------------+---------+-------------+ > > > > | | no rw_page | rw_page | Improvement | > > > > +-------------------------------------------+ > > > > | PMEM | 3.3 us | 2.9 us | 12% | > > > > +-------------------------------------------+ > > > > | BTT | 3.7 us | 3.4 us | 8% | > > > > +------+------------+---------+-------------+ > > > > > > > > The workload was pmbench, a memory benchmark, run on a system where I had > > > > severely restricted the amount of memory in the system with the 'mem' kernel > > > > command line parameter. The benchmark was set up to test more memory than I > > > > allowed the OS to have so it spilled over into swap. > > > > > > > > The PMEM or BTT device was set up as my swap device, and during the test I got > > > > a few hundred thousand samples of each of swap_writepage() and > > > > swap_writepage(). The PMEM/BTT device was just memory reserved with the > > > > memmap kernel command line parameter. > > > > > > > > Thanks, Matthew, for asking for performance data. It looks like removing this > > > > code would have been a mistake. > > > > > > By suggestion of Christoph Hellwig, I made a quick patch which does IO without > > > dynamic bio allocation for swap IO. Actually, it's not formal patch to be > > > worth to send mainline yet but I believe it's enough to test the improvement. > > > > > > Could you test patchset on pmem and btt without rw_page? > > > > > > For working the patch, block drivers need to declare it's synchronous IO > > > device via BDI_CAP_SYNC but if it's hard, you can just make every swap IO > > > comes from (sis->flags & SWP_SYNC_IO) with removing condition check > > > > > > if (!(sis->flags & SWP_SYNC_IO)) in swap_[read|write]page. > > > > > > Patchset is based on 4.13-rc3. > > > > Thanks for the patch, here are the updated results from my test box: > > > > Average latency of swap_writepage() > > +------+------------+---------+---------+ > > | | no rw_page | minchan | rw_page | > > +---------------------------------------- > > | PMEM | 5.0 us | 4.98 us | 4.7 us | > > +---------------------------------------- > > | BTT | 6.8 us | 6.3 us | 6.1 us | > > +------+------------+---------+---------+ > > > > Average latency of swap_readpage() > > +------+------------+---------+---------+ > > | | no rw_page | minchan | rw_page | > > +---------------------------------------- > > | PMEM | 3.3 us | 3.27 us | 2.9 us | > > +---------------------------------------- > > | BTT | 3.7 us | 3.44 us | 3.4 us | > > +------+------------+---------+---------+ > > > > I've added another digit in precision in some cases to help differentiate the > > various results. > > > > In all cases your patches did perform better than with the regularly allocated > > BIO, but again for all cases the rw_page() path was the fastest, even if only > > marginally. > > Thanks for the testing. Your testing number is within noise level? > > I cannot understand why PMEM doesn't have enough gain while BTT is significant > win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic > allocation and mine and rw_page testing reduced it significantly. However, > in no rw_page with pmem, there wasn't many cases to wait bio allocations due > to the device is so fast so the number comes from purely the number of > instructions has done. At a quick glance of bio init/submit, it's not trivial > so indeed, i understand where the 12% enhancement comes from but I'm not sure > it's really big difference in real practice at the cost of maintaince burden. I tested pmbench 10 times in my local machine(4 core) with zram-swap. In my machine, even, on-stack bio is faster than rw_page. Unbelievable. I guess it's really hard to get stable result in severe memory pressure. It would be a result within noise level(see below stddev). So, I think it's hard to conclude rw_page is far faster than onstack-bio. rw_page avg 5.54us stddev 8.89% max 6.02us min 4.20us onstack bio avg 5.27us stddev 13.03% max 5.96us min 3.55us
[ adding Dave who is working on a blk-mq + dma offload version of the pmem driver ] On Fri, Aug 4, 2017 at 1:17 AM, Minchan Kim <minchan@kernel.org> wrote: > On Fri, Aug 04, 2017 at 12:54:41PM +0900, Minchan Kim wrote: [..] >> Thanks for the testing. Your testing number is within noise level? >> >> I cannot understand why PMEM doesn't have enough gain while BTT is significant >> win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic >> allocation and mine and rw_page testing reduced it significantly. However, >> in no rw_page with pmem, there wasn't many cases to wait bio allocations due >> to the device is so fast so the number comes from purely the number of >> instructions has done. At a quick glance of bio init/submit, it's not trivial >> so indeed, i understand where the 12% enhancement comes from but I'm not sure >> it's really big difference in real practice at the cost of maintaince burden. > > I tested pmbench 10 times in my local machine(4 core) with zram-swap. > In my machine, even, on-stack bio is faster than rw_page. Unbelievable. > > I guess it's really hard to get stable result in severe memory pressure. > It would be a result within noise level(see below stddev). > So, I think it's hard to conclude rw_page is far faster than onstack-bio. > > rw_page > avg 5.54us > stddev 8.89% > max 6.02us > min 4.20us > > onstack bio > avg 5.27us > stddev 13.03% > max 5.96us > min 3.55us The maintenance burden of having alternative submission paths is significant especially as we consider the pmem driver ising more services of the core block layer. Ideally, I'd want to complete the rw_page removal work before we look at the blk-mq + dma offload reworks. The change to introduce BDI_CAP_SYNC is interesting because we might have use for switching between dma offload and cpu copy based on whether the I/O is synchronous or otherwise hinted to be a low latency request. Right now the dma offload patches are using "bio_segments() > 1" as the gate for selecting offload vs cpu copy which seem inadequate.
On Fri, Aug 04, 2017 at 11:01:08AM -0700, Dan Williams wrote: > [ adding Dave who is working on a blk-mq + dma offload version of the > pmem driver ] > > On Fri, Aug 4, 2017 at 1:17 AM, Minchan Kim <minchan@kernel.org> wrote: > > On Fri, Aug 04, 2017 at 12:54:41PM +0900, Minchan Kim wrote: > [..] > >> Thanks for the testing. Your testing number is within noise level? > >> > >> I cannot understand why PMEM doesn't have enough gain while BTT is significant > >> win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic > >> allocation and mine and rw_page testing reduced it significantly. However, > >> in no rw_page with pmem, there wasn't many cases to wait bio allocations due > >> to the device is so fast so the number comes from purely the number of > >> instructions has done. At a quick glance of bio init/submit, it's not trivial > >> so indeed, i understand where the 12% enhancement comes from but I'm not sure > >> it's really big difference in real practice at the cost of maintaince burden. > > > > I tested pmbench 10 times in my local machine(4 core) with zram-swap. > > In my machine, even, on-stack bio is faster than rw_page. Unbelievable. > > > > I guess it's really hard to get stable result in severe memory pressure. > > It would be a result within noise level(see below stddev). > > So, I think it's hard to conclude rw_page is far faster than onstack-bio. > > > > rw_page > > avg 5.54us > > stddev 8.89% > > max 6.02us > > min 4.20us > > > > onstack bio > > avg 5.27us > > stddev 13.03% > > max 5.96us > > min 3.55us > > The maintenance burden of having alternative submission paths is > significant especially as we consider the pmem driver ising more > services of the core block layer. Ideally, I'd want to complete the > rw_page removal work before we look at the blk-mq + dma offload > reworks. > > The change to introduce BDI_CAP_SYNC is interesting because we might > have use for switching between dma offload and cpu copy based on > whether the I/O is synchronous or otherwise hinted to be a low latency > request. Right now the dma offload patches are using "bio_segments() > > 1" as the gate for selecting offload vs cpu copy which seem > inadequate. Okay, so based on the feedback above and from Jens[1], it sounds like we want to go forward with removing the rw_page() interface, and instead optimize the regular I/O path via on-stack BIOS and dma offload, correct? If so, I'll prepare patches that fully remove the rw_page() code, and let Minchan and Dave work on their optimizations. [1]: https://lkml.org/lkml/2017/8/3/803
On Fri, Aug 4, 2017 at 11:21 AM, Ross Zwisler <ross.zwisler@linux.intel.com> wrote: > On Fri, Aug 04, 2017 at 11:01:08AM -0700, Dan Williams wrote: >> [ adding Dave who is working on a blk-mq + dma offload version of the >> pmem driver ] >> >> On Fri, Aug 4, 2017 at 1:17 AM, Minchan Kim <minchan@kernel.org> wrote: >> > On Fri, Aug 04, 2017 at 12:54:41PM +0900, Minchan Kim wrote: >> [..] >> >> Thanks for the testing. Your testing number is within noise level? >> >> >> >> I cannot understand why PMEM doesn't have enough gain while BTT is significant >> >> win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic >> >> allocation and mine and rw_page testing reduced it significantly. However, >> >> in no rw_page with pmem, there wasn't many cases to wait bio allocations due >> >> to the device is so fast so the number comes from purely the number of >> >> instructions has done. At a quick glance of bio init/submit, it's not trivial >> >> so indeed, i understand where the 12% enhancement comes from but I'm not sure >> >> it's really big difference in real practice at the cost of maintaince burden. >> > >> > I tested pmbench 10 times in my local machine(4 core) with zram-swap. >> > In my machine, even, on-stack bio is faster than rw_page. Unbelievable. >> > >> > I guess it's really hard to get stable result in severe memory pressure. >> > It would be a result within noise level(see below stddev). >> > So, I think it's hard to conclude rw_page is far faster than onstack-bio. >> > >> > rw_page >> > avg 5.54us >> > stddev 8.89% >> > max 6.02us >> > min 4.20us >> > >> > onstack bio >> > avg 5.27us >> > stddev 13.03% >> > max 5.96us >> > min 3.55us >> >> The maintenance burden of having alternative submission paths is >> significant especially as we consider the pmem driver ising more >> services of the core block layer. Ideally, I'd want to complete the >> rw_page removal work before we look at the blk-mq + dma offload >> reworks. >> >> The change to introduce BDI_CAP_SYNC is interesting because we might >> have use for switching between dma offload and cpu copy based on >> whether the I/O is synchronous or otherwise hinted to be a low latency >> request. Right now the dma offload patches are using "bio_segments() > >> 1" as the gate for selecting offload vs cpu copy which seem >> inadequate. > > Okay, so based on the feedback above and from Jens[1], it sounds like we want > to go forward with removing the rw_page() interface, and instead optimize the > regular I/O path via on-stack BIOS and dma offload, correct? > > If so, I'll prepare patches that fully remove the rw_page() code, and let > Minchan and Dave work on their optimizations. I think the conversion to on-stack-bio should be done in the same patchset that removes rw_page. We don't want to leave a known performance regression while the on-stack-bio work is in-flight.
On Fri, Aug 04, 2017 at 11:24:49AM -0700, Dan Williams wrote: > On Fri, Aug 4, 2017 at 11:21 AM, Ross Zwisler > <ross.zwisler@linux.intel.com> wrote: > > On Fri, Aug 04, 2017 at 11:01:08AM -0700, Dan Williams wrote: > >> [ adding Dave who is working on a blk-mq + dma offload version of the > >> pmem driver ] > >> > >> On Fri, Aug 4, 2017 at 1:17 AM, Minchan Kim <minchan@kernel.org> wrote: > >> > On Fri, Aug 04, 2017 at 12:54:41PM +0900, Minchan Kim wrote: > >> [..] > >> >> Thanks for the testing. Your testing number is within noise level? > >> >> > >> >> I cannot understand why PMEM doesn't have enough gain while BTT is significant > >> >> win(8%). I guess no rw_page with BTT testing had more chances to wait bio dynamic > >> >> allocation and mine and rw_page testing reduced it significantly. However, > >> >> in no rw_page with pmem, there wasn't many cases to wait bio allocations due > >> >> to the device is so fast so the number comes from purely the number of > >> >> instructions has done. At a quick glance of bio init/submit, it's not trivial > >> >> so indeed, i understand where the 12% enhancement comes from but I'm not sure > >> >> it's really big difference in real practice at the cost of maintaince burden. > >> > > >> > I tested pmbench 10 times in my local machine(4 core) with zram-swap. > >> > In my machine, even, on-stack bio is faster than rw_page. Unbelievable. > >> > > >> > I guess it's really hard to get stable result in severe memory pressure. > >> > It would be a result within noise level(see below stddev). > >> > So, I think it's hard to conclude rw_page is far faster than onstack-bio. > >> > > >> > rw_page > >> > avg 5.54us > >> > stddev 8.89% > >> > max 6.02us > >> > min 4.20us > >> > > >> > onstack bio > >> > avg 5.27us > >> > stddev 13.03% > >> > max 5.96us > >> > min 3.55us > >> > >> The maintenance burden of having alternative submission paths is > >> significant especially as we consider the pmem driver ising more > >> services of the core block layer. Ideally, I'd want to complete the > >> rw_page removal work before we look at the blk-mq + dma offload > >> reworks. > >> > >> The change to introduce BDI_CAP_SYNC is interesting because we might > >> have use for switching between dma offload and cpu copy based on > >> whether the I/O is synchronous or otherwise hinted to be a low latency > >> request. Right now the dma offload patches are using "bio_segments() > > >> 1" as the gate for selecting offload vs cpu copy which seem > >> inadequate. > > > > Okay, so based on the feedback above and from Jens[1], it sounds like we want > > to go forward with removing the rw_page() interface, and instead optimize the > > regular I/O path via on-stack BIOS and dma offload, correct? > > > > If so, I'll prepare patches that fully remove the rw_page() code, and let > > Minchan and Dave work on their optimizations. > > I think the conversion to on-stack-bio should be done in the same > patchset that removes rw_page. We don't want to leave a known > performance regression while the on-stack-bio work is in-flight. Okay. It seems everyone get an agreement with on-stack-bio. I will send my formal patchset including Ross's patches which removes rw_page. Thanks. Thanks.
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 856d5dc02451..b1c5e9bf3ad5 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -125,9 +125,9 @@ static inline bool is_partial_io(struct bio_vec *bvec) static void zram_revalidate_disk(struct zram *zram) { revalidate_disk(zram->disk); - /* revalidate_disk reset the BDI_CAP_STABLE_WRITES so set again */ + /* revalidate_disk reset the BDI capability so set again */ zram->disk->queue->backing_dev_info->capabilities |= - BDI_CAP_STABLE_WRITES; + (BDI_CAP_STABLE_WRITES|BDI_CAP_SYNC); } /* @@ -1096,7 +1096,7 @@ static int zram_open(struct block_device *bdev, fmode_t mode) static const struct block_device_operations zram_devops = { .open = zram_open, .swap_slot_free_notify = zram_slot_free_notify, - .rw_page = zram_rw_page, + // .rw_page = zram_rw_page, .owner = THIS_MODULE }; diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 854e1bdd0b2a..05eee145d964 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -130,6 +130,7 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio); #define BDI_CAP_STABLE_WRITES 0x00000008 #define BDI_CAP_STRICTLIMIT 0x00000010 #define BDI_CAP_CGROUP_WRITEBACK 0x00000020 +#define BDI_CAP_SYNC 0x00000040 #define BDI_CAP_NO_ACCT_AND_WRITEBACK \ (BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB) @@ -177,6 +178,11 @@ long wait_iff_congested(struct pglist_data *pgdat, int sync, long timeout); int pdflush_proc_obsolete(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); +static inline bool bdi_cap_sync_io_required(struct backing_dev_info *bdi) +{ + return bdi->capabilities & BDI_CAP_SYNC; +} + static inline bool bdi_cap_stable_pages_required(struct backing_dev_info *bdi) { return bdi->capabilities & BDI_CAP_STABLE_WRITES; diff --git a/include/linux/swap.h b/include/linux/swap.h index d83d28e53e62..86457dbfd300 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -152,8 +152,9 @@ enum { SWP_AREA_DISCARD = (1 << 8), /* single-time swap area discards */ SWP_PAGE_DISCARD = (1 << 9), /* freed swap page-cluster discards */ SWP_STABLE_WRITES = (1 << 10), /* no overwrite PG_writeback pages */ + SWP_SYNC_IO = (1 << 11), /* add others here before... */ - SWP_SCANNING = (1 << 11), /* refcount in scan_swap_map */ + SWP_SCANNING = (1 << 12), /* refcount in scan_swap_map */ }; #define SWAP_CLUSTER_MAX 32UL diff --git a/mm/page_io.c b/mm/page_io.c index b6c4ac388209..2c85e5182364 100644 --- a/mm/page_io.c +++ b/mm/page_io.c @@ -263,7 +263,6 @@ static sector_t swap_page_sector(struct page *page) int __swap_writepage(struct page *page, struct writeback_control *wbc, bio_end_io_t end_write_func) { - struct bio *bio; int ret; struct swap_info_struct *sis = page_swap_info(page); @@ -316,25 +315,44 @@ int __swap_writepage(struct page *page, struct writeback_control *wbc, } ret = 0; - bio = get_swap_bio(GFP_NOIO, page, end_write_func); - if (bio == NULL) { - set_page_dirty(page); + count_vm_event(PSWPOUT); + + if (!(sis->flags & SWP_SYNC_IO)) { + struct bio *bio; + + bio = get_swap_bio(GFP_NOIO, page, end_write_func); + if (bio == NULL) { + set_page_dirty(page); + unlock_page(page); + ret = -ENOMEM; + goto out; + } + bio->bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); + set_page_writeback(page); unlock_page(page); - ret = -ENOMEM; - goto out; + submit_bio(bio); + } else { + struct bio bio; + struct bio_vec bvec; + + bio_init(&bio, &bvec, 1); + + bio.bi_iter.bi_sector = map_swap_page(page, &bio.bi_bdev); + bio.bi_iter.bi_sector <<= PAGE_SHIFT - 9; + bio.bi_end_io = end_write_func; + bio_add_page(&bio, page, PAGE_SIZE, 0); + bio.bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); + bio_get(&bio); + set_page_writeback(page); + unlock_page(page); + submit_bio(&bio); } - bio->bi_opf = REQ_OP_WRITE | wbc_to_write_flags(wbc); - count_vm_event(PSWPOUT); - set_page_writeback(page); - unlock_page(page); - submit_bio(bio); out: return ret; } int swap_readpage(struct page *page, bool do_poll) { - struct bio *bio; int ret = 0; struct swap_info_struct *sis = page_swap_info(page); blk_qc_t qc; @@ -371,29 +389,49 @@ int swap_readpage(struct page *page, bool do_poll) } ret = 0; - bio = get_swap_bio(GFP_KERNEL, page, end_swap_bio_read); - if (bio == NULL) { - unlock_page(page); - ret = -ENOMEM; - goto out; - } - bdev = bio->bi_bdev; - bio->bi_private = current; - bio_set_op_attrs(bio, REQ_OP_READ, 0); - count_vm_event(PSWPIN); - bio_get(bio); - qc = submit_bio(bio); - while (do_poll) { - set_current_state(TASK_UNINTERRUPTIBLE); - if (!READ_ONCE(bio->bi_private)) - break; - - if (!blk_mq_poll(bdev_get_queue(bdev), qc)) - break; + if (!(sis->flags & SWP_SYNC_IO)) { + struct bio *bio; + + bio = get_swap_bio(GFP_KERNEL, page, end_swap_bio_read); + if (bio == NULL) { + unlock_page(page); + ret = -ENOMEM; + goto out; + } + bdev = bio->bi_bdev; + bio->bi_private = current; + bio_set_op_attrs(bio, REQ_OP_READ, 0); + bio_get(bio); + qc = submit_bio(bio); + while (do_poll) { + set_current_state(TASK_UNINTERRUPTIBLE); + if (!READ_ONCE(bio->bi_private)) + break; + + if (!blk_mq_poll(bdev_get_queue(bdev), qc)) + break; + } + __set_current_state(TASK_RUNNING); + bio_put(bio); + } else { + struct bio bio; + struct bio_vec bvec; + + bio_init(&bio, &bvec, 1); + + bio.bi_iter.bi_sector = map_swap_page(page, &bio.bi_bdev); + bio.bi_iter.bi_sector <<= PAGE_SHIFT - 9; + bio.bi_end_io = end_swap_bio_read; + bio_add_page(&bio, page, PAGE_SIZE, 0); + bio.bi_private = current; + BUG_ON(bio.bi_iter.bi_size != PAGE_SIZE); + bio_set_op_attrs(&bio, REQ_OP_READ, 0); + /* end_swap_bio_read calls bio_put unconditionally */ + bio_get(&bio); + submit_bio(&bio); } - __set_current_state(TASK_RUNNING); - bio_put(bio); + count_vm_event(PSWPIN); out: return ret; } diff --git a/mm/swapfile.c b/mm/swapfile.c index 6ba4aab2db0b..855d50eeeaf9 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2931,6 +2931,9 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags) if (bdi_cap_stable_pages_required(inode_to_bdi(inode))) p->flags |= SWP_STABLE_WRITES; + if (bdi_cap_sync_io_required(inode_to_bdi(inode))) + p->flags |= SWP_SYNC_IO; + if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) { int cpu; unsigned long ci, nr_cluster;