Message ID | E1dcBhV-00088e-8x@rmk-PC.armlinux.org.uk (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Russell, Thank you for the patch. On Monday 31 Jul 2017 15:29:41 Russell King wrote: > Add CEC notifier support to the HDMI bridge driver, so that the CEC > part of the IP can receive its physical address. > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > --- > drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- > 2 files changed, 22 insertions(+), 1 deletion(-) [snip] > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index > ead11242c4b9..82e55ee8e4fa 100644 > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c [snip] > @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, > if (ret) > goto err_iahb; > > + hdmi->cec_notifier = cec_notifier_get(dev); > + if (!hdmi->cec_notifier) { > + ret = -ENOMEM; > + goto err_iahb; > + } > + > /* > * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator > * N and cts values before enabling phy > @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, > hdmi->ddc = NULL; > } > > + if (hdmi->cec_notifier) > + cec_notifier_put(hdmi->cec_notifier); > + > clk_disable_unprepare(hdmi->iahb_clk); > err_isfr: > clk_disable_unprepare(hdmi->isfr_clk); I'm not very familiar yet with the CEC API so I made have missed something, but shouldn't you call cec_notifier_put() in the remove() handler ?
On 08/02/17 16:11, Laurent Pinchart wrote: > Hi Russell, > > Thank you for the patch. > > On Monday 31 Jul 2017 15:29:41 Russell King wrote: >> Add CEC notifier support to the HDMI bridge driver, so that the CEC >> part of the IP can receive its physical address. >> >> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> >> --- >> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- >> 2 files changed, 22 insertions(+), 1 deletion(-) > > [snip] > >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index >> ead11242c4b9..82e55ee8e4fa 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c > > [snip] > >> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, >> if (ret) >> goto err_iahb; >> >> + hdmi->cec_notifier = cec_notifier_get(dev); >> + if (!hdmi->cec_notifier) { >> + ret = -ENOMEM; >> + goto err_iahb; >> + } >> + >> /* >> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator >> * N and cts values before enabling phy >> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, >> hdmi->ddc = NULL; >> } >> >> + if (hdmi->cec_notifier) >> + cec_notifier_put(hdmi->cec_notifier); >> + >> clk_disable_unprepare(hdmi->iahb_clk); >> err_isfr: >> clk_disable_unprepare(hdmi->isfr_clk); > > I'm not very familiar yet with the CEC API so I made have missed something, > but shouldn't you call cec_notifier_put() in the remove() handler ? > Yes, you should. Well spotted, I missed that one. Regards, Hans
On Wed, Aug 02, 2017 at 04:17:15PM +0200, Hans Verkuil wrote:
> Yes, you should. Well spotted, I missed that one.
Great, another respin. I give up.
On 07/31/2017 08:55 PM, Hans Verkuil wrote: > On 07/31/2017 04:29 PM, Russell King wrote: >> Add CEC notifier support to the HDMI bridge driver, so that the CEC >> part of the IP can receive its physical address. >> >> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > Acked-by: Hans Verkuil <hans.verkuil@cisco.com> > Queued to drm-misc-next. Thanks, Archit > Regards, > > Hans > >> --- >> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- >> 2 files changed, 22 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig >> index 53e78d092d18..351db000599a 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig >> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig >> @@ -2,6 +2,7 @@ config DRM_DW_HDMI >> tristate >> select DRM_KMS_HELPER >> select REGMAP_MMIO >> + select CEC_CORE if CEC_NOTIFIER >> >> config DRM_DW_HDMI_AHB_AUDIO >> tristate "Synopsys Designware AHB Audio interface" >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> index ead11242c4b9..82e55ee8e4fa 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> @@ -36,7 +36,10 @@ >> #include "dw-hdmi.h" >> #include "dw-hdmi-audio.h" >> >> +#include <media/cec-notifier.h> >> + >> #define DDC_SEGMENT_ADDR 0x30 >> + >> #define HDMI_EDID_LEN 512 >> >> enum hdmi_datamap { >> @@ -175,6 +178,8 @@ struct dw_hdmi { >> struct regmap *regm; >> void (*enable_audio)(struct dw_hdmi *hdmi); >> void (*disable_audio)(struct dw_hdmi *hdmi); >> + >> + struct cec_notifier *cec_notifier; >> }; >> >> #define HDMI_IH_PHY_STAT0_RX_SENSE \ >> @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector) >> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); >> hdmi->sink_has_audio = drm_detect_monitor_audio(edid); >> drm_mode_connector_update_edid_property(connector, edid); >> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid); >> ret = drm_add_edid_modes(connector, edid); >> /* Store the ELD */ >> drm_edid_to_eld(connector, edid); >> @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) >> * ask the source to re-read the EDID. >> */ >> if (intr_stat & >> - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) >> + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) { >> __dw_hdmi_setup_rx_sense(hdmi, >> phy_stat & HDMI_PHY_HPD, >> phy_stat & HDMI_PHY_RX_SENSE); >> >> + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) >> + cec_notifier_set_phys_addr(hdmi->cec_notifier, >> + CEC_PHYS_ADDR_INVALID); >> + } >> + >> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { >> dev_dbg(hdmi->dev, "EVENT=%s\n", >> phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout"); >> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, >> if (ret) >> goto err_iahb; >> >> + hdmi->cec_notifier = cec_notifier_get(dev); >> + if (!hdmi->cec_notifier) { >> + ret = -ENOMEM; >> + goto err_iahb; >> + } >> + >> /* >> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator >> * N and cts values before enabling phy >> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, >> hdmi->ddc = NULL; >> } >> >> + if (hdmi->cec_notifier) >> + cec_notifier_put(hdmi->cec_notifier); >> + >> clk_disable_unprepare(hdmi->iahb_clk); >> err_isfr: >> clk_disable_unprepare(hdmi->isfr_clk); >> > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
Archit, I posted a v3 that added a missing cec_notifier_put to the remove() function. Apparently you missed that. The chunk in question from the v3 patch is this: @@ -2469,6 +2489,9 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi) /* Disable all interrupts */ hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); + if (hdmi->cec_notifier) + cec_notifier_put(hdmi->cec_notifier); + clk_disable_unprepare(hdmi->iahb_clk); clk_disable_unprepare(hdmi->isfr_clk); Can you add that or should I make a new patch? Regards, Hans On 04/08/17 15:36, Archit Taneja wrote: > > > On 07/31/2017 08:55 PM, Hans Verkuil wrote: >> On 07/31/2017 04:29 PM, Russell King wrote: >>> Add CEC notifier support to the HDMI bridge driver, so that the CEC >>> part of the IP can receive its physical address. >>> >>> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> >> >> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> >> > > Queued to drm-misc-next. > > Thanks, > Archit > >> Regards, >> >> Hans >> >>> --- >>> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- >>> 2 files changed, 22 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig >>> index 53e78d092d18..351db000599a 100644 >>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig >>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig >>> @@ -2,6 +2,7 @@ config DRM_DW_HDMI >>> tristate >>> select DRM_KMS_HELPER >>> select REGMAP_MMIO >>> + select CEC_CORE if CEC_NOTIFIER >>> config DRM_DW_HDMI_AHB_AUDIO >>> tristate "Synopsys Designware AHB Audio interface" >>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>> index ead11242c4b9..82e55ee8e4fa 100644 >>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>> @@ -36,7 +36,10 @@ >>> #include "dw-hdmi.h" >>> #include "dw-hdmi-audio.h" >>> +#include <media/cec-notifier.h> >>> + >>> #define DDC_SEGMENT_ADDR 0x30 >>> + >>> #define HDMI_EDID_LEN 512 >>> enum hdmi_datamap { >>> @@ -175,6 +178,8 @@ struct dw_hdmi { >>> struct regmap *regm; >>> void (*enable_audio)(struct dw_hdmi *hdmi); >>> void (*disable_audio)(struct dw_hdmi *hdmi); >>> + >>> + struct cec_notifier *cec_notifier; >>> }; >>> #define HDMI_IH_PHY_STAT0_RX_SENSE \ >>> @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector) >>> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); >>> hdmi->sink_has_audio = drm_detect_monitor_audio(edid); >>> drm_mode_connector_update_edid_property(connector, edid); >>> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid); >>> ret = drm_add_edid_modes(connector, edid); >>> /* Store the ELD */ >>> drm_edid_to_eld(connector, edid); >>> @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) >>> * ask the source to re-read the EDID. >>> */ >>> if (intr_stat & >>> - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) >>> + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) { >>> __dw_hdmi_setup_rx_sense(hdmi, >>> phy_stat & HDMI_PHY_HPD, >>> phy_stat & HDMI_PHY_RX_SENSE); >>> + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) >>> + cec_notifier_set_phys_addr(hdmi->cec_notifier, >>> + CEC_PHYS_ADDR_INVALID); >>> + } >>> + >>> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { >>> dev_dbg(hdmi->dev, "EVENT=%s\n", >>> phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout"); >>> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, >>> if (ret) >>> goto err_iahb; >>> + hdmi->cec_notifier = cec_notifier_get(dev); >>> + if (!hdmi->cec_notifier) { >>> + ret = -ENOMEM; >>> + goto err_iahb; >>> + } >>> + >>> /* >>> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator >>> * N and cts values before enabling phy >>> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, >>> hdmi->ddc = NULL; >>> } >>> + if (hdmi->cec_notifier) >>> + cec_notifier_put(hdmi->cec_notifier); >>> + >>> clk_disable_unprepare(hdmi->iahb_clk); >>> err_isfr: >>> clk_disable_unprepare(hdmi->isfr_clk); >>> >> >> >> _______________________________________________ >> linux-arm-kernel mailing list >> linux-arm-kernel@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >> >
On 08/05/2017 02:53 PM, Hans Verkuil wrote: > Archit, > > I posted a v3 that added a missing cec_notifier_put to the remove() function. > Apparently you missed that. The chunk in question from the v3 patch is this: I did. Sorry, about that. There was an issue with my mailer. > > @@ -2469,6 +2489,9 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi) > /* Disable all interrupts */ > hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0); > > + if (hdmi->cec_notifier) > + cec_notifier_put(hdmi->cec_notifier); > + > clk_disable_unprepare(hdmi->iahb_clk); > clk_disable_unprepare(hdmi->isfr_clk); > > Can you add that or should I make a new patch? We aren't allowed to do rebases on drm-misc-next unless absolutely needed. A separate patch that adds the missing notifier_put() call in remove would be great to have. I'll queue the patches #3/4 and #4/4 from the v3 revision. Thanks, Archit > > Regards, > > Hans > > On 04/08/17 15:36, Archit Taneja wrote: >> >> >> On 07/31/2017 08:55 PM, Hans Verkuil wrote: >>> On 07/31/2017 04:29 PM, Russell King wrote: >>>> Add CEC notifier support to the HDMI bridge driver, so that the CEC >>>> part of the IP can receive its physical address. >>>> >>>> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> >>> >>> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> >>> >> >> Queued to drm-misc-next. >> >> Thanks, >> Archit >> >>> Regards, >>> >>> Hans >>> >>>> --- >>>> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + >>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- >>>> 2 files changed, 22 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig >>>> index 53e78d092d18..351db000599a 100644 >>>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig >>>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig >>>> @@ -2,6 +2,7 @@ config DRM_DW_HDMI >>>> tristate >>>> select DRM_KMS_HELPER >>>> select REGMAP_MMIO >>>> + select CEC_CORE if CEC_NOTIFIER >>>> config DRM_DW_HDMI_AHB_AUDIO >>>> tristate "Synopsys Designware AHB Audio interface" >>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> index ead11242c4b9..82e55ee8e4fa 100644 >>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >>>> @@ -36,7 +36,10 @@ >>>> #include "dw-hdmi.h" >>>> #include "dw-hdmi-audio.h" >>>> +#include <media/cec-notifier.h> >>>> + >>>> #define DDC_SEGMENT_ADDR 0x30 >>>> + >>>> #define HDMI_EDID_LEN 512 >>>> enum hdmi_datamap { >>>> @@ -175,6 +178,8 @@ struct dw_hdmi { >>>> struct regmap *regm; >>>> void (*enable_audio)(struct dw_hdmi *hdmi); >>>> void (*disable_audio)(struct dw_hdmi *hdmi); >>>> + >>>> + struct cec_notifier *cec_notifier; >>>> }; >>>> #define HDMI_IH_PHY_STAT0_RX_SENSE \ >>>> @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector) >>>> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); >>>> hdmi->sink_has_audio = drm_detect_monitor_audio(edid); >>>> drm_mode_connector_update_edid_property(connector, edid); >>>> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid); >>>> ret = drm_add_edid_modes(connector, edid); >>>> /* Store the ELD */ >>>> drm_edid_to_eld(connector, edid); >>>> @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) >>>> * ask the source to re-read the EDID. >>>> */ >>>> if (intr_stat & >>>> - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) >>>> + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) { >>>> __dw_hdmi_setup_rx_sense(hdmi, >>>> phy_stat & HDMI_PHY_HPD, >>>> phy_stat & HDMI_PHY_RX_SENSE); >>>> + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) >>>> + cec_notifier_set_phys_addr(hdmi->cec_notifier, >>>> + CEC_PHYS_ADDR_INVALID); >>>> + } >>>> + >>>> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { >>>> dev_dbg(hdmi->dev, "EVENT=%s\n", >>>> phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout"); >>>> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, >>>> if (ret) >>>> goto err_iahb; >>>> + hdmi->cec_notifier = cec_notifier_get(dev); >>>> + if (!hdmi->cec_notifier) { >>>> + ret = -ENOMEM; >>>> + goto err_iahb; >>>> + } >>>> + >>>> /* >>>> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator >>>> * N and cts values before enabling phy >>>> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, >>>> hdmi->ddc = NULL; >>>> } >>>> + if (hdmi->cec_notifier) >>>> + cec_notifier_put(hdmi->cec_notifier); >>>> + >>>> clk_disable_unprepare(hdmi->iahb_clk); >>>> err_isfr: >>>> clk_disable_unprepare(hdmi->isfr_clk); >>>> >>> >>> >>> _______________________________________________ >>> linux-arm-kernel mailing list >>> linux-arm-kernel@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >>> >> >
diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig index 53e78d092d18..351db000599a 100644 --- a/drivers/gpu/drm/bridge/synopsys/Kconfig +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig @@ -2,6 +2,7 @@ config DRM_DW_HDMI tristate select DRM_KMS_HELPER select REGMAP_MMIO + select CEC_CORE if CEC_NOTIFIER config DRM_DW_HDMI_AHB_AUDIO tristate "Synopsys Designware AHB Audio interface" diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index ead11242c4b9..82e55ee8e4fa 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -36,7 +36,10 @@ #include "dw-hdmi.h" #include "dw-hdmi-audio.h" +#include <media/cec-notifier.h> + #define DDC_SEGMENT_ADDR 0x30 + #define HDMI_EDID_LEN 512 enum hdmi_datamap { @@ -175,6 +178,8 @@ struct dw_hdmi { struct regmap *regm; void (*enable_audio)(struct dw_hdmi *hdmi); void (*disable_audio)(struct dw_hdmi *hdmi); + + struct cec_notifier *cec_notifier; }; #define HDMI_IH_PHY_STAT0_RX_SENSE \ @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector) hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid); hdmi->sink_has_audio = drm_detect_monitor_audio(edid); drm_mode_connector_update_edid_property(connector, edid); + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid); ret = drm_add_edid_modes(connector, edid); /* Store the ELD */ drm_edid_to_eld(connector, edid); @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id) * ask the source to re-read the EDID. */ if (intr_stat & - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) { __dw_hdmi_setup_rx_sense(hdmi, phy_stat & HDMI_PHY_HPD, phy_stat & HDMI_PHY_RX_SENSE); + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) + cec_notifier_set_phys_addr(hdmi->cec_notifier, + CEC_PHYS_ADDR_INVALID); + } + if (intr_stat & HDMI_IH_PHY_STAT0_HPD) { dev_dbg(hdmi->dev, "EVENT=%s\n", phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout"); @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev, if (ret) goto err_iahb; + hdmi->cec_notifier = cec_notifier_get(dev); + if (!hdmi->cec_notifier) { + ret = -ENOMEM; + goto err_iahb; + } + /* * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator * N and cts values before enabling phy @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev, hdmi->ddc = NULL; } + if (hdmi->cec_notifier) + cec_notifier_put(hdmi->cec_notifier); + clk_disable_unprepare(hdmi->iahb_clk); err_isfr: clk_disable_unprepare(hdmi->isfr_clk);
Add CEC notifier support to the HDMI bridge driver, so that the CEC part of the IP can receive its physical address. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/gpu/drm/bridge/synopsys/Kconfig | 1 + drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-)