Message ID | 20170808161645.25329-8-daniels@collabora.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Aug 8, 2017 at 9:16 AM, Daniel Stone <daniels@collabora.com> wrote: > Also try to test CCS on available non-primary planes. However, as there > is not enough bandwidth to scan out both the primary and sprite planes > when using CCS (or even Y-tiled), fall back to linear for the primary > plane when using CCS for a sprite/cursor plane. > > Signed-off-by: Daniel Stone <daniels@collabora.com> > --- > tests/kms_ccs.c | 74 ++++++++++++++++++++++++++++++ > +++++++++++++++++++++------ > 1 file changed, 67 insertions(+), 7 deletions(-) > > diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c > index 79856f97..c544b36f 100644 > --- a/tests/kms_ccs.c > +++ b/tests/kms_ccs.c > @@ -37,19 +37,24 @@ enum test_flags { > > enum test_fb_flags { > FB_COMPRESSED = 1 << 0, > + FB_HAS_PLANE = 1 << 1, > }; > > typedef struct { > int drm_fd; > igt_display_t display; > struct igt_fb fb; > + struct igt_fb fb_sprite; > igt_output_t *output; > enum pipe pipe; > enum test_flags flags; > + igt_plane_t *plane; > } data_t; > > #define RED 0x00ff0000 > #define COMPRESSED_RED 0x0ff0000f > +#define GREEN 0x0000ff00 > +#define COMPRESSED_GREEN 0x000ff00f > > #define CCS_UNCOMPRESSED 0x0 > #define CCS_COMPRESSED 0x55 > @@ -173,8 +178,10 @@ static void render_fb(data_t *data, uint32_t > gem_handle, unsigned int size, > { > uint32_t *ptr; > unsigned int half_height, half_size; > - uint32_t uncompressed_color = RED; > - uint32_t compressed_color = COMPRESSED_RED; > + uint32_t uncompressed_color = data->plane ? GREEN : RED; > + uint32_t compressed_color = > + data->plane ? COMPRESSED_GREEN : COMPRESSED_RED; > + uint32_t bad_color = RED; > int i; > > ptr = gem_mmap__cpu(data->drm_fd, gem_handle, 0, size, > @@ -200,8 +207,19 @@ static void render_fb(data_t *data, uint32_t > gem_handle, unsigned int size, > ptr[i] = compressed_color; > } > } else { > - for (i = 0; i < size / 4; i++) > - ptr[i] = uncompressed_color; > + /* When we're displaying the primary plane underneath a > + * sprite plane, cut out a 128 x 128 area (less than the > sprite) > + * plane size which we paint red, so we know easily if it's > + * bad. > + */ > + for (i = 0; i < size / 4; i++) { > + if ((fb_flags & FB_HAS_PLANE) && > + i < (stride * 128) && (i % (stride / 4)) < 1) > { > I think this should be: (i / (stride / 4)) < 128 && (i % (stride / 4)) < 128 Other than that and the other two comments I made on another patch, this series looks good to me. Patches 1-5 are Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Patches 6-7 are Acked-by: Jason Ekstrand <jason@jlekstrand.net> I don't feel 100% confident reviewing them without lots of reading of IGT docs. > + ptr[i] = bad_color; > + } else { > + ptr[i] = uncompressed_color; > + } > + } > } > > munmap(ptr, size); > @@ -249,10 +267,17 @@ static void generate_fb(data_t *data, struct igt_fb > *fb, > uint64_t modifier; > int ret; > > + /* Use either compressed or Y-tiled to test. However, given the > lack of > + * available bandwidth, we use linear for the primary plane when > + * testing sprites, since we cannot fit two CCS planes into the > + * available FIFO configurations. > + */ > if (fb_flags & FB_COMPRESSED) > modifier = LOCAL_I915_FORMAT_MOD_Y_TILED_CCS; > - else > + else if (!(fb_flags & FB_HAS_PLANE)) > modifier = LOCAL_I915_FORMAT_MOD_Y_TILED; > + else > + modifier = 0; > > f.flags = LOCAL_DRM_MODE_FB_MODIFIERS; > f.width = width; > @@ -338,8 +363,17 @@ static void try_config(data_t *data, enum > test_fb_flags fb_flags) > DRM_PLANE_TYPE_PRIMARY); > plane_require_ccs(data, primary, DRM_FORMAT_XRGB8888); > > - generate_fb(data, &data->fb, drm_mode->hdisplay, > drm_mode->vdisplay, > - fb_flags); > + if (data->plane && fb_flags & FB_COMPRESSED) { > + plane_require_ccs(data, data->plane, DRM_FORMAT_XRGB8888); > + generate_fb(data, &data->fb, drm_mode->hdisplay, > + drm_mode->vdisplay, > + (fb_flags & ~FB_COMPRESSED) | FB_HAS_PLANE); > + generate_fb(data, &data->fb_sprite, 256, 256, fb_flags); > + } else { > + generate_fb(data, &data->fb, drm_mode->hdisplay, > + drm_mode->vdisplay, fb_flags); > + } > + > if (data->flags & TEST_BAD_PIXEL_FORMAT) > return; > > @@ -347,6 +381,12 @@ static void try_config(data_t *data, enum > test_fb_flags fb_flags) > igt_plane_set_size(primary, drm_mode->hdisplay, > drm_mode->vdisplay); > igt_plane_set_fb(primary, &data->fb); > > + if (data->plane && fb_flags & FB_COMPRESSED) { > + igt_plane_set_position(data->plane, 0, 0); > + igt_plane_set_size(data->plane, 256, 256); > + igt_plane_set_fb(data->plane, &data->fb_sprite); > + } > + > if (data->flags & TEST_ROTATE_180) > igt_plane_set_rotation(primary, IGT_ROTATION_180); > if (data->flags & TEST_BAD_ROTATION_90) > @@ -359,6 +399,13 @@ static void try_config(data_t *data, enum > test_fb_flags fb_flags) > igt_assert_eq(ret, 0); > > igt_debug_wait_for_keypress("ccs"); > + > + if (data->plane && fb_flags & FB_COMPRESSED) { > + igt_plane_set_position(data->plane, 0, 0); > + igt_plane_set_size(data->plane, 0, 0); > + igt_plane_set_fb(data->plane, NULL); > + igt_remove_fb(display->drm_fd, &data->fb_sprite); > + } > } > > static void test_output(data_t *data) > @@ -427,6 +474,7 @@ igt_main > > for_each_pipe(&data.display, data.pipe) { > const char *pipe_name = kmstest_pipe_name(data.pipe); > + int sprite_idx = 0; > > data.flags = TEST_BAD_PIXEL_FORMAT; > igt_subtest_f("pipe-%s-bad-pixel-format", pipe_name) > @@ -443,6 +491,18 @@ igt_main > data.flags = TEST_CRC | TEST_ROTATE_180; > igt_subtest_f("pipe-%s-crc-primary-rotation-180", > pipe_name) > test_output(&data); > + > + data.flags = TEST_CRC; > + for_each_plane_on_pipe(&data.display, data.pipe, > data.plane) { > + if (data.plane->type == DRM_PLANE_TYPE_PRIMARY) > + continue; > + sprite_idx++; > + igt_subtest_f("pipe-%s-crc-sprite-%d-basic", > pipe_name, > + sprite_idx) > + test_output(&data); > + } > + > + data.plane = NULL; > } > > igt_fixture > -- > 2.13.4 > >
diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c index 79856f97..c544b36f 100644 --- a/tests/kms_ccs.c +++ b/tests/kms_ccs.c @@ -37,19 +37,24 @@ enum test_flags { enum test_fb_flags { FB_COMPRESSED = 1 << 0, + FB_HAS_PLANE = 1 << 1, }; typedef struct { int drm_fd; igt_display_t display; struct igt_fb fb; + struct igt_fb fb_sprite; igt_output_t *output; enum pipe pipe; enum test_flags flags; + igt_plane_t *plane; } data_t; #define RED 0x00ff0000 #define COMPRESSED_RED 0x0ff0000f +#define GREEN 0x0000ff00 +#define COMPRESSED_GREEN 0x000ff00f #define CCS_UNCOMPRESSED 0x0 #define CCS_COMPRESSED 0x55 @@ -173,8 +178,10 @@ static void render_fb(data_t *data, uint32_t gem_handle, unsigned int size, { uint32_t *ptr; unsigned int half_height, half_size; - uint32_t uncompressed_color = RED; - uint32_t compressed_color = COMPRESSED_RED; + uint32_t uncompressed_color = data->plane ? GREEN : RED; + uint32_t compressed_color = + data->plane ? COMPRESSED_GREEN : COMPRESSED_RED; + uint32_t bad_color = RED; int i; ptr = gem_mmap__cpu(data->drm_fd, gem_handle, 0, size, @@ -200,8 +207,19 @@ static void render_fb(data_t *data, uint32_t gem_handle, unsigned int size, ptr[i] = compressed_color; } } else { - for (i = 0; i < size / 4; i++) - ptr[i] = uncompressed_color; + /* When we're displaying the primary plane underneath a + * sprite plane, cut out a 128 x 128 area (less than the sprite) + * plane size which we paint red, so we know easily if it's + * bad. + */ + for (i = 0; i < size / 4; i++) { + if ((fb_flags & FB_HAS_PLANE) && + i < (stride * 128) && (i % (stride / 4)) < 1) { + ptr[i] = bad_color; + } else { + ptr[i] = uncompressed_color; + } + } } munmap(ptr, size); @@ -249,10 +267,17 @@ static void generate_fb(data_t *data, struct igt_fb *fb, uint64_t modifier; int ret; + /* Use either compressed or Y-tiled to test. However, given the lack of + * available bandwidth, we use linear for the primary plane when + * testing sprites, since we cannot fit two CCS planes into the + * available FIFO configurations. + */ if (fb_flags & FB_COMPRESSED) modifier = LOCAL_I915_FORMAT_MOD_Y_TILED_CCS; - else + else if (!(fb_flags & FB_HAS_PLANE)) modifier = LOCAL_I915_FORMAT_MOD_Y_TILED; + else + modifier = 0; f.flags = LOCAL_DRM_MODE_FB_MODIFIERS; f.width = width; @@ -338,8 +363,17 @@ static void try_config(data_t *data, enum test_fb_flags fb_flags) DRM_PLANE_TYPE_PRIMARY); plane_require_ccs(data, primary, DRM_FORMAT_XRGB8888); - generate_fb(data, &data->fb, drm_mode->hdisplay, drm_mode->vdisplay, - fb_flags); + if (data->plane && fb_flags & FB_COMPRESSED) { + plane_require_ccs(data, data->plane, DRM_FORMAT_XRGB8888); + generate_fb(data, &data->fb, drm_mode->hdisplay, + drm_mode->vdisplay, + (fb_flags & ~FB_COMPRESSED) | FB_HAS_PLANE); + generate_fb(data, &data->fb_sprite, 256, 256, fb_flags); + } else { + generate_fb(data, &data->fb, drm_mode->hdisplay, + drm_mode->vdisplay, fb_flags); + } + if (data->flags & TEST_BAD_PIXEL_FORMAT) return; @@ -347,6 +381,12 @@ static void try_config(data_t *data, enum test_fb_flags fb_flags) igt_plane_set_size(primary, drm_mode->hdisplay, drm_mode->vdisplay); igt_plane_set_fb(primary, &data->fb); + if (data->plane && fb_flags & FB_COMPRESSED) { + igt_plane_set_position(data->plane, 0, 0); + igt_plane_set_size(data->plane, 256, 256); + igt_plane_set_fb(data->plane, &data->fb_sprite); + } + if (data->flags & TEST_ROTATE_180) igt_plane_set_rotation(primary, IGT_ROTATION_180); if (data->flags & TEST_BAD_ROTATION_90) @@ -359,6 +399,13 @@ static void try_config(data_t *data, enum test_fb_flags fb_flags) igt_assert_eq(ret, 0); igt_debug_wait_for_keypress("ccs"); + + if (data->plane && fb_flags & FB_COMPRESSED) { + igt_plane_set_position(data->plane, 0, 0); + igt_plane_set_size(data->plane, 0, 0); + igt_plane_set_fb(data->plane, NULL); + igt_remove_fb(display->drm_fd, &data->fb_sprite); + } } static void test_output(data_t *data) @@ -427,6 +474,7 @@ igt_main for_each_pipe(&data.display, data.pipe) { const char *pipe_name = kmstest_pipe_name(data.pipe); + int sprite_idx = 0; data.flags = TEST_BAD_PIXEL_FORMAT; igt_subtest_f("pipe-%s-bad-pixel-format", pipe_name) @@ -443,6 +491,18 @@ igt_main data.flags = TEST_CRC | TEST_ROTATE_180; igt_subtest_f("pipe-%s-crc-primary-rotation-180", pipe_name) test_output(&data); + + data.flags = TEST_CRC; + for_each_plane_on_pipe(&data.display, data.pipe, data.plane) { + if (data.plane->type == DRM_PLANE_TYPE_PRIMARY) + continue; + sprite_idx++; + igt_subtest_f("pipe-%s-crc-sprite-%d-basic", pipe_name, + sprite_idx) + test_output(&data); + } + + data.plane = NULL; } igt_fixture
Also try to test CCS on available non-primary planes. However, as there is not enough bandwidth to scan out both the primary and sprite planes when using CCS (or even Y-tiled), fall back to linear for the primary plane when using CCS for a sprite/cursor plane. Signed-off-by: Daniel Stone <daniels@collabora.com> --- tests/kms_ccs.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 67 insertions(+), 7 deletions(-)