| Message ID | 1502470596-4112-1-git-send-email-okaya@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 11, 2017 at 12:56:34PM -0400, Sinan Kaya wrote: > Kernel is hiding Configuration Request Retry Status (CRS) inside > pci_bus_read_dev_vendor_id() function. We are looking to add support for > Function Level Reset (FLR) where vendor id read returns ~0. > > Move CRS handling into its own function so that it can be called from other > places as well. I think this is a much better idea than what I proposed. I still have a few questions proposals. I'll post a v11 to show what I'm thinking. > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > --- > drivers/pci/pci.h | 2 ++ > drivers/pci/probe.c | 44 ++++++++++++++++++++++++++++++-------------- > 2 files changed, 32 insertions(+), 14 deletions(-) > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 22e0617..1bbe851 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -235,6 +235,8 @@ enum pci_bar_type { > pci_bar_mem64, /* A 64-bit memory BAR */ > }; > > +bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, > + int crs_timeout); > bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl, > int crs_timeout); > int pci_setup_device(struct pci_dev *dev); > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index c31310d..b1cb7bd 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -1824,29 +1824,17 @@ struct pci_dev *pci_alloc_dev(struct pci_bus *bus) > } > EXPORT_SYMBOL(pci_alloc_dev); > > -bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, > - int crs_timeout) > +bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, int crs_timeout) > { > int delay = 1; > > - if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) > - return false; > - > - /* some broken boards return 0 or ~0 if a slot is empty: */ > - if (*l == 0xffffffff || *l == 0x00000000 || > - *l == 0x0000ffff || *l == 0xffff0000) > - return false; > - > /* > * Configuration Request Retry Status. Some root ports return the > * actual device ID instead of the synthetic ID (0xFFFF) required > * by the PCIe spec. Ignore the device ID and only check for > * (vendor id == 1). > */ > - while ((*l & 0xffff) == 0x0001) { > - if (!crs_timeout) > - return false; > - > + do { > msleep(delay); > delay *= 2; > if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) > @@ -1858,6 +1846,34 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, > PCI_FUNC(devfn)); > return false; While staring at this, I think I found a pre-existing bug in pci_bus_read_dev_vendor_id(). It looks like this: while ((*l & 0xffff) == 0x0001) { pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l); if (delay > crs_timeout) return false; } The problem is that the config read may have *succeeded* that last time before we time out. I think the correct sequence is: - check for timeout - read PCI_VENDOR_ID - check for CRS > } > + } while ((*l & 0xffff) == 0x0001); > + > + return true; > +} > +EXPORT_SYMBOL(pci_bus_wait_crs); I don't think we need EXPORT_SYMBOL here, do we? > +bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, > + int crs_timeout) > +{ > + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) > + return false; > + > + /* some broken boards return 0 or ~0 if a slot is empty: */ > + if (*l == 0xffffffff || *l == 0x00000000 || > + *l == 0x0000ffff || *l == 0xffff0000) > + return false; > + > + /* > + * Configuration Request Retry Status. Some root ports return the > + * actual device ID instead of the synthetic ID (0xFFFF) required > + * by the PCIe spec. Ignore the device ID and only check for > + * (vendor id == 1). > + */ > + if ((*l & 0xffff) == 0x0001) { > + if (!crs_timeout) > + return false; One thing I don't like is that every caller of pci_bus_wait_crs() has to know about the 0x0001 value. > + return pci_bus_wait_crs(bus, devfn, l, crs_timeout); > } > > return true; > -- > 1.9.1 >
On 8/17/2017 11:00 PM, Bjorn Helgaas wrote: > On Fri, Aug 11, 2017 at 12:56:34PM -0400, Sinan Kaya wrote: >> Kernel is hiding Configuration Request Retry Status (CRS) inside >> pci_bus_read_dev_vendor_id() function. We are looking to add support for >> Function Level Reset (FLR) where vendor id read returns ~0. >> >> Move CRS handling into its own function so that it can be called from other >> places as well. > > I think this is a much better idea than what I proposed. I still have > a few questions proposals. I'll post a v11 to show what I'm thinking. > Sure, let me know. I can test it. >> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> >> --- >> drivers/pci/pci.h | 2 ++ >> drivers/pci/probe.c | 44 ++++++++++++++++++++++++++++++-------------- >> 2 files changed, 32 insertions(+), 14 deletions(-) >> >> msleep(delay); >> delay *= 2; >> if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) >> @@ -1858,6 +1846,34 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, >> PCI_FUNC(devfn)); >> return false; > > While staring at this, I think I found a pre-existing bug in > pci_bus_read_dev_vendor_id(). It looks like this: > > while ((*l & 0xffff) == 0x0001) { > pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l); > if (delay > crs_timeout) > return false; > } > > The problem is that the config read may have *succeeded* that last > time before we time out. I think the correct sequence is: > > - check for timeout > - read PCI_VENDOR_ID > - check for CRS > Yeah, it makes sense. >> } >> + } while ((*l & 0xffff) == 0x0001); >> + >> + return true; >> +} >> +EXPORT_SYMBOL(pci_bus_wait_crs); > > I don't think we need EXPORT_SYMBOL here, do we? copy/paste mistake. > >> +bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, >> + int crs_timeout) >> +{ >> + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) >> + return false; >> + >> + /* some broken boards return 0 or ~0 if a slot is empty: */ >> + if (*l == 0xffffffff || *l == 0x00000000 || >> + *l == 0x0000ffff || *l == 0xffff0000) >> + return false; >> + >> + /* >> + * Configuration Request Retry Status. Some root ports return the >> + * actual device ID instead of the synthetic ID (0xFFFF) required >> + * by the PCIe spec. Ignore the device ID and only check for >> + * (vendor id == 1). >> + */ >> + if ((*l & 0xffff) == 0x0001) { >> + if (!crs_timeout) >> + return false; > > One thing I don't like is that every caller of pci_bus_wait_crs() has > to know about the 0x0001 value. Another helper function? I was trying to poll for CRS completion only if we know that we are observing CRS. > >> + return pci_bus_wait_crs(bus, devfn, l, crs_timeout); >> } >> >> return true; >> -- >> 1.9.1 >> >
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 22e0617..1bbe851 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -235,6 +235,8 @@ enum pci_bar_type { pci_bar_mem64, /* A 64-bit memory BAR */ }; +bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, + int crs_timeout); bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl, int crs_timeout); int pci_setup_device(struct pci_dev *dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c31310d..b1cb7bd 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1824,29 +1824,17 @@ struct pci_dev *pci_alloc_dev(struct pci_bus *bus) } EXPORT_SYMBOL(pci_alloc_dev); -bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, - int crs_timeout) +bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, int crs_timeout) { int delay = 1; - if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) - return false; - - /* some broken boards return 0 or ~0 if a slot is empty: */ - if (*l == 0xffffffff || *l == 0x00000000 || - *l == 0x0000ffff || *l == 0xffff0000) - return false; - /* * Configuration Request Retry Status. Some root ports return the * actual device ID instead of the synthetic ID (0xFFFF) required * by the PCIe spec. Ignore the device ID and only check for * (vendor id == 1). */ - while ((*l & 0xffff) == 0x0001) { - if (!crs_timeout) - return false; - + do { msleep(delay); delay *= 2; if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) @@ -1858,6 +1846,34 @@ bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, PCI_FUNC(devfn)); return false; } + } while ((*l & 0xffff) == 0x0001); + + return true; +} +EXPORT_SYMBOL(pci_bus_wait_crs); + +bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, + int crs_timeout) +{ + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) + return false; + + /* some broken boards return 0 or ~0 if a slot is empty: */ + if (*l == 0xffffffff || *l == 0x00000000 || + *l == 0x0000ffff || *l == 0xffff0000) + return false; + + /* + * Configuration Request Retry Status. Some root ports return the + * actual device ID instead of the synthetic ID (0xFFFF) required + * by the PCIe spec. Ignore the device ID and only check for + * (vendor id == 1). + */ + if ((*l & 0xffff) == 0x0001) { + if (!crs_timeout) + return false; + + return pci_bus_wait_crs(bus, devfn, l, crs_timeout); } return true;
Kernel is hiding Configuration Request Retry Status (CRS) inside pci_bus_read_dev_vendor_id() function. We are looking to add support for Function Level Reset (FLR) where vendor id read returns ~0. Move CRS handling into its own function so that it can be called from other places as well. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> --- drivers/pci/pci.h | 2 ++ drivers/pci/probe.c | 44 ++++++++++++++++++++++++++++++-------------- 2 files changed, 32 insertions(+), 14 deletions(-)