diff mbox

[v3,1/2] ath10k: add the PCI PM core suspend/resume ops

Message ID 1503438455-6133-1-git-send-email-ryanhsu@qti.qualcomm.com (mailing list archive)
State Accepted
Commit 32faa3f0ee509176aeac0009e3ee93f9b15f07a5
Delegated to: Kalle Valo
Headers show

Commit Message

ryanhsu@qti.qualcomm.com Aug. 22, 2017, 9:47 p.m. UTC
From: Ryan Hsu <ryanhsu@qti.qualcomm.com>

The actual PCI suspend/resume in ath10k has been handled in wow.c,
but in the case of the device doesn't support remote wakeup,
the .hif_suspend() and .hif_resume() will never be handled.

  ath10k_wow_op_suspend()
  {
	if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
		    ar->running_fw->fw_file.fw_features))) {
		ret = 1;
		goto exit;
	}

	....

	ret = ath10k_hif_suspend(ar);
  }

So register the PCI PM core to support the suspend/resume if the device
doesn't support remote wakeup.

Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 42 +++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

Comments

Kalle Valo Aug. 31, 2017, 12:52 p.m. UTC | #1
ryanhsu@qti.qualcomm.com wrote:

> The actual PCI suspend/resume in ath10k has been handled in wow.c,
> but in the case of the device doesn't support remote wakeup,
> the .hif_suspend() and .hif_resume() will never be handled.
> 
>   ath10k_wow_op_suspend()
>   {
> 	if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
> 		    ar->running_fw->fw_file.fw_features))) {
> 		ret = 1;
> 		goto exit;
> 	}
> 
> 	....
> 
> 	ret = ath10k_hif_suspend(ar);
>   }
> 
> So register the PCI PM core to support the suspend/resume if the device
> doesn't support remote wakeup.
> 
> Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

This had a warning:

drivers/net/wireless/ath/ath10k/pci.c:3651:1: warning: symbol 'ath10k_pci_pm_ops' was not declared. Should it be static?

I fixed it in the pending branch by making it static:

static SIMPLE_DEV_PM_OPS(ath10k_pci_pm_ops,
			 ath10k_pci_pm_suspend,
			 ath10k_pci_pm_resume);

Please review.
Kalle Valo Aug. 31, 2017, 6:18 p.m. UTC | #2
ryanhsu@qti.qualcomm.com wrote:

> The actual PCI suspend/resume in ath10k has been handled in wow.c,
> but in the case of the device doesn't support remote wakeup,
> the .hif_suspend() and .hif_resume() will never be handled.
> 
>   ath10k_wow_op_suspend()
>   {
> 	if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
> 		    ar->running_fw->fw_file.fw_features))) {
> 		ret = 1;
> 		goto exit;
> 	}
> 
> 	....
> 
> 	ret = ath10k_hif_suspend(ar);
>   }
> 
> So register the PCI PM core to support the suspend/resume if the device
> doesn't support remote wakeup.
> 
> Signed-off-by: Ryan Hsu <ryanhsu@qti.qualcomm.com>
> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

2 patches applied to ath-next branch of ath.git, thanks.

32faa3f0ee50 ath10k: add the PCI PM core suspend/resume ops
393b706cf20c ath10k: configure and enable the wakeup capability
ryanhsu@qti.qualcomm.com Sept. 1, 2017, 11:13 p.m. UTC | #3
On 08/31/2017 05:52 AM, Kalle Valo wrote:

> This had a warning:

>

> drivers/net/wireless/ath/ath10k/pci.c:3651:1: warning: symbol 'ath10k_pci_pm_ops' was not declared. Should it be static?

>

> I fixed it in the pending branch by making it static:

>

> static SIMPLE_DEV_PM_OPS(ath10k_pci_pm_ops,

> 			 ath10k_pci_pm_suspend,

> 			 ath10k_pci_pm_resume);

>

> Please review.

>


Yes and thanks!

-- 
Ryan Hsu
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0457e31..4aac0de 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3358,11 +3358,53 @@  static void ath10k_pci_remove(struct pci_dev *pdev)
 
 MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
 
+#ifdef CONFIG_PM
+
+static int ath10k_pci_pm_suspend(struct device *dev)
+{
+	struct ath10k *ar = dev_get_drvdata(dev);
+	int ret;
+
+	if (test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
+		     ar->running_fw->fw_file.fw_features))
+		return 0;
+
+	ret = ath10k_hif_suspend(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to suspend hif: %d\n", ret);
+
+	return ret;
+}
+
+static int ath10k_pci_pm_resume(struct device *dev)
+{
+	struct ath10k *ar = dev_get_drvdata(dev);
+	int ret;
+
+	if (test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
+		     ar->running_fw->fw_file.fw_features))
+		return 0;
+
+	ret = ath10k_hif_resume(ar);
+	if (ret)
+		ath10k_warn(ar, "failed to resume hif: %d\n", ret);
+
+	return ret;
+}
+
+SIMPLE_DEV_PM_OPS(ath10k_pci_pm_ops,
+		  ath10k_pci_pm_suspend,
+		  ath10k_pci_pm_resume);
+#endif
+
 static struct pci_driver ath10k_pci_driver = {
 	.name = "ath10k_pci",
 	.id_table = ath10k_pci_id_table,
 	.probe = ath10k_pci_probe,
 	.remove = ath10k_pci_remove,
+#ifdef CONFIG_PM
+	.driver.pm = &ath10k_pci_pm_ops,
+#endif
 };
 
 static int __init ath10k_pci_init(void)