diff mbox

[thermal-next] thermal: brcmstb: remove two redundant integer range checks

Message ID 20170903131619.6857-1-colin.king@canonical.com (mailing list archive)
State Changes Requested
Delegated to: Eduardo Valentin
Headers show

Commit Message

Colin King Sept. 3, 2017, 1:16 p.m. UTC
From: Colin Ian King <colin.king@canonical.com>

The comparisons for integer low on low > INT_MAX and also
integer high > INT_MAX are never going to be true since an
int type cannot be greater than INT_MAX.  Remove these redundant
checks.

Detected by: CoverityScan CID#1455245, 1455248 ("Operands don't affect
  result (CONSTANT_EXPRESSION_RESULT)")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 4 ----
 1 file changed, 4 deletions(-)

Comments

Brian Norris Sept. 6, 2017, 6:40 p.m. UTC | #1
Hi,

On Sun, Sep 03, 2017 at 02:16:19PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> The comparisons for integer low on low > INT_MAX and also
> integer high > INT_MAX are never going to be true since an
> int type cannot be greater than INT_MAX.  Remove these redundant
> checks.
> 
> Detected by: CoverityScan CID#1455245, 1455248 ("Operands don't affect
>   result (CONSTANT_EXPRESSION_RESULT)")
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/thermal/broadcom/brcmstb_thermal.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> index 87b8e7a86ee3..bcb3945feea6 100644
> --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> @@ -278,8 +278,6 @@ static int brcmstb_set_trips(void *data, int low, int high)
>  	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
>  
>  	if (low) {
> -		if (low > INT_MAX)
> -			low = INT_MAX;
>  		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
>  		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
>  	} else {
> @@ -287,8 +285,6 @@ static int brcmstb_set_trips(void *data, int low, int high)
>  	}
>  
>  	if (high < ULONG_MAX) {

Dan's robots noticed that the above condition is not useful either (on
architectures where INT_MAX < ULONG_MAX -- i.e., all?), since 'high' is
'int', not 'unsigned long'.

Should probably fix that

s/ULONG_MAX/INT_MAX/

?

Brian

> -		if (high > INT_MAX)
> -			high = INT_MAX;
>  		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
>  		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
>  	} else {
> -- 
> 2.14.1
>
Eduardo Valentin Sept. 8, 2017, 2:59 a.m. UTC | #2
Hello,

On Wed, Sep 06, 2017 at 11:40:46AM -0700, Brian Norris wrote:
> Hi,
> 
> On Sun, Sep 03, 2017 at 02:16:19PM +0100, Colin King wrote:
> > From: Colin Ian King <colin.king@canonical.com>
> > 
> > The comparisons for integer low on low > INT_MAX and also
> > integer high > INT_MAX are never going to be true since an
> > int type cannot be greater than INT_MAX.  Remove these redundant
> > checks.
> > 
> > Detected by: CoverityScan CID#1455245, 1455248 ("Operands don't affect
> >   result (CONSTANT_EXPRESSION_RESULT)")
> > 
> > Signed-off-by: Colin Ian King <colin.king@canonical.com>
> > ---
> >  drivers/thermal/broadcom/brcmstb_thermal.c | 4 ----
> >  1 file changed, 4 deletions(-)
> > 
> > diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
> > index 87b8e7a86ee3..bcb3945feea6 100644
> > --- a/drivers/thermal/broadcom/brcmstb_thermal.c
> > +++ b/drivers/thermal/broadcom/brcmstb_thermal.c
> > @@ -278,8 +278,6 @@ static int brcmstb_set_trips(void *data, int low, int high)
> >  	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
> >  
> >  	if (low) {
> > -		if (low > INT_MAX)
> > -			low = INT_MAX;
> >  		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
> >  		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
> >  	} else {
> > @@ -287,8 +285,6 @@ static int brcmstb_set_trips(void *data, int low, int high)
> >  	}
> >  
> >  	if (high < ULONG_MAX) {
> 
> Dan's robots noticed that the above condition is not useful either (on
> architectures where INT_MAX < ULONG_MAX -- i.e., all?), since 'high' is
> 'int', not 'unsigned long'.
> 
> Should probably fix that
> 
> s/ULONG_MAX/INT_MAX/

Yeah, that would probably make sense. I might be also the case that the
driver was considering long because that was the type used to represent
temperature some time back in the thermal subsystem. So, the limits on
the driver may be outdated.

> 
> ?
> 
> Brian
> 
> > -		if (high > INT_MAX)
> > -			high = INT_MAX;
> >  		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
> >  		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
> >  	} else {
> > -- 
> > 2.14.1
> >
diff mbox

Patch

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 87b8e7a86ee3..bcb3945feea6 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -278,8 +278,6 @@  static int brcmstb_set_trips(void *data, int low, int high)
 	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
 
 	if (low) {
-		if (low > INT_MAX)
-			low = INT_MAX;
 		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
 		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
 	} else {
@@ -287,8 +285,6 @@  static int brcmstb_set_trips(void *data, int low, int high)
 	}
 
 	if (high < ULONG_MAX) {
-		if (high > INT_MAX)
-			high = INT_MAX;
 		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
 		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
 	} else {