@@ -12,6 +12,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
+ "qcom,ipq8074-wcss-pil"
- reg:
Usage: required
Value type: <prop-encoded-array>
@@ -49,11 +50,15 @@ on the Qualcomm Hexagon core.
Usage: required
Value type: <phandle>
Definition: reference to the reset-controller for the modem sub-system
+ reference to the list of 3 reset-controllers for the
+ wcss sub-system
- reset-names:
Usage: required
Value type: <stringlist>
- Definition: must be "mss_restart"
+ Definition: must be "mss_restart" for the modem sub-system
+ Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
+ for the wcss syb-system
- cx-supply:
- mss-supply:
@@ -102,6 +102,7 @@ config QCOM_Q6V5_PIL
select MFD_SYSCON
select QCOM_RPROC_COMMON
select QCOM_SCM
+ select QCOM_MDT_LOADER
help
Say y here to support the Qualcomm Peripherial Image Loader for the
Hexagon V5 based remote processors.
@@ -129,6 +129,9 @@ struct q6v5 {
u32 halt_nc;
struct reset_control *mss_restart;
+ struct reset_control *wcss_aon_reset;
+ struct reset_control *wcss_reset;
+ struct reset_control *wcss_q6_reset;
struct qcom_smem_state *state;
unsigned stop_bit;
@@ -180,6 +183,7 @@ enum {
MSS_MSM8916,
MSS_MSM8974,
MSS_MSM8996,
+ WCSS_IPQ8074,
};
static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
@@ -354,6 +358,21 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
return 0;
}
+static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
+{
+ struct q6v5 *qproc = rproc->priv;
+
+ return qcom_mdt_load_no_init(qproc->dev, fw, rproc->firmware,
+ 0, qproc->mba_region, qproc->mba_phys,
+ qproc->mba_size);
+}
+
+static const struct rproc_fw_ops q6v5_wcss_fw_ops = {
+ .find_rsc_table = q6v5_find_rsc_table,
+ .load = q6v5_wcss_load,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+};
+
static const struct rproc_fw_ops q6v5_fw_ops = {
.find_rsc_table = q6v5_find_rsc_table,
.load = q6v5_load,
@@ -1055,6 +1074,26 @@ static int q6v5_init_clocks(struct device *dev, struct clk **clks,
return i;
}
+static int q6v5_wcss_init_reset(struct q6v5 *qproc)
+{
+ qproc->wcss_aon_reset = devm_reset_control_get(qproc->dev,
+ "wcss_aon_reset");
+ if (IS_ERR(qproc->wcss_aon_reset))
+ return PTR_ERR(qproc->wcss_aon_reset);
+
+ qproc->wcss_reset = devm_reset_control_get(qproc->dev,
+ "wcss_reset");
+ if (IS_ERR(qproc->wcss_reset))
+ return PTR_ERR(qproc->wcss_reset);
+
+ qproc->wcss_q6_reset = devm_reset_control_get(qproc->dev,
+ "wcss_q6_reset");
+ if (IS_ERR(qproc->wcss_q6_reset))
+ return PTR_ERR(qproc->wcss_q6_reset);
+
+ return 0;
+}
+
static int q6v5_init_reset(struct q6v5 *qproc)
{
qproc->mss_restart = devm_reset_control_get(qproc->dev, NULL);
@@ -1113,6 +1152,9 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
return -EBUSY;
}
+ if (qproc->version == WCSS_IPQ8074)
+ return 0;
+
child = of_get_child_by_name(qproc->dev->of_node, "mpss");
node = of_parse_phandle(child, "memory-region", 0);
ret = of_address_to_resource(node, 0, &r);
@@ -1156,6 +1198,7 @@ static int q6v5_probe(struct platform_device *pdev)
qproc = (struct q6v5 *)rproc->priv;
qproc->dev = &pdev->dev;
qproc->rproc = rproc;
+ qproc->version = desc->version;
platform_set_drvdata(pdev, qproc);
init_completion(&qproc->start_done);
@@ -1205,7 +1248,6 @@ static int q6v5_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
- qproc->version = desc->version;
qproc->need_mem_protection = desc->need_mem_protection;
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
if (ret < 0)
@@ -1353,11 +1395,20 @@ static int q6v5_remove(struct platform_device *pdev)
.ops = &q6v5_ops,
};
+static const struct rproc_hexagon_res ipq8074_wcss = {
+ .hexagon_mba_image = "IPQ8074/q6_fw.mdt",
+ .need_mem_protection = false,
+ .version = WCSS_IPQ8074,
+ .init_reset = q6v5_wcss_init_reset,
+ .fw_ops = &q6v5_wcss_fw_ops,
+};
+
static const struct of_device_id q6v5_of_match[] = {
{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
+ { .compatible = "qcom,ipq8074-wcss-pil", .data = &ipq8074_wcss},
{ },
};
MODULE_DEVICE_TABLE(of, q6v5_of_match);
IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan (Lithium) IP. An mdt type single image format is used for the firmware. So the mdt_load function can be directly used to load the firmware. Also add the relevant resets required for this core. Signed-off-by: Sricharan R <sricharan@codeaurora.org> --- .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 ++- drivers/remoteproc/Kconfig | 1 + drivers/remoteproc/qcom_q6v5_pil.c | 53 +++++++++++++++++++++- 3 files changed, 59 insertions(+), 2 deletions(-)