Message ID | 20170913092554.22976-1-maarten.lankhorst@linux.intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Tested-by: Marta Löfstedt <marta.lofstedt@intel.com> > -----Original Message----- > From: Maarten Lankhorst [mailto:maarten.lankhorst@linux.intel.com] > Sent: Wednesday, September 13, 2017 12:26 PM > To: intel-gfx@lists.freedesktop.org > Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>; Daniel Vetter > <daniel.vetter@ffwll.ch>; Jani Nikula <jani.nikula@linux.intel.com>; Lofstedt, > Marta <marta.lofstedt@intel.com> > Subject: [PATCH] drm/i915: Unset legacy_cursor_update early in > intel_atomic_commit > > Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed > the call to wait_for_vblanks and replaced it with flip_done. > > Unfortunately legacy_cursor_update was unset too late, and the > replacement call drm_atomic_helper_wait_for_flip_done() was a noop. > Make sure that its unset before setup_commit() is called to fix this issue. > > Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675 > Testcase: kms_cursor_crc > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > Cc: Jani Nikula <jani.nikula@linux.intel.com> > Reported-by: Marta Löfstedt <marta.lofstedt@intel.com> > Cc: Marta Löfstedt <marta.lofstedt@intel.com> > --- > drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++++++++---------- > ------ > 1 file changed, 24 insertions(+), 20 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c > b/drivers/gpu/drm/i915/intel_display.c > index ba76b2db939c..c1da48d77c8e 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -12412,23 +12412,14 @@ static int intel_atomic_commit(struct > drm_device *dev, { > struct intel_atomic_state *intel_state = > to_intel_atomic_state(state); > struct drm_i915_private *dev_priv = to_i915(dev); > - int ret = 0; > - > - ret = drm_atomic_helper_setup_commit(state, nonblock); > - if (ret) > - return ret; > + struct drm_crtc_state *new_crtc_state; > + struct drm_crtc *crtc; > + int i, ret = 0; > > drm_atomic_state_get(state); > i915_sw_fence_init(&intel_state->commit_ready, > intel_atomic_commit_ready); > > - ret = intel_atomic_prepare_commit(dev, state); > - if (ret) { > - DRM_DEBUG_ATOMIC("Preparing state failed > with %i\n", ret); > - i915_sw_fence_commit(&intel_state- > >commit_ready); > - return ret; > - } > - > /* > * The intel_legacy_cursor_update() fast path takes care > * of avoiding the vblank waits for simple cursor @@ -12437,19 > +12428,32 @@ static int intel_atomic_commit(struct drm_device *dev, > * updates happen during the correct frames. Gen9+ have > * double buffered watermarks and so shouldn't need this. > * > - * Do this after drm_atomic_helper_setup_commit() and > - * intel_atomic_prepare_commit() because we still want > - * to skip the flip and fb cleanup waits. Although that > - * does risk yanking the mapping from under the display > - * engine. > + * Unset state->legacy_cursor_update before the call to > + * drm_atomic_helper_setup_commit() because otherwise > + * drm_atomic_helper_wait_for_flip_done() is a noop and > + * we get FIFO underruns because we didn't wait > + * for vblank. > * > * FIXME doing watermarks and fb cleanup from a vblank > worker > * (assuming we had any) would solve these problems. > */ > - if (INTEL_GEN(dev_priv) < 9) > - state->legacy_cursor_update = false; > + if (INTEL_GEN(dev_priv) < 9 && state->legacy_cursor_update) > { > + for_each_new_crtc_in_state(state, crtc, > new_crtc_state, i) > + if > (to_intel_crtc_state(new_crtc_state)->wm.need_postvbl_update) > + state- > >legacy_cursor_update = false; > + } > + > + ret = intel_atomic_prepare_commit(dev, state); > + if (ret) { > + DRM_DEBUG_ATOMIC("Preparing state failed > with %i\n", ret); > + i915_sw_fence_commit(&intel_state- > >commit_ready); > + return ret; > + } > + > + ret = drm_atomic_helper_setup_commit(state, nonblock); > + if (!ret) > + ret = drm_atomic_helper_swap_state(state, > true); > > - ret = drm_atomic_helper_swap_state(state, true); > if (ret) { > i915_sw_fence_commit(&intel_state- > >commit_ready); > > -- > 2.14.1
On Wed, Sep 13, 2017 at 11:25:54AM +0200, Maarten Lankhorst wrote: > Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed > the call to wait_for_vblanks and replaced it with flip_done. > > Unfortunately legacy_cursor_update was unset too late, and the > replacement call drm_atomic_helper_wait_for_flip_done() was > a noop. Make sure that its unset before setup_commit() is > called to fix this issue. > > Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> > Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675 > Testcase: kms_cursor_crc > Cc: Daniel Vetter <daniel.vetter@ffwll.ch> > Cc: Jani Nikula <jani.nikula@linux.intel.com> > Reported-by: Marta Löfstedt <marta.lofstedt@intel.com> > Cc: Marta Löfstedt <marta.lofstedt@intel.com> > --- > drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++++++++---------------- > 1 file changed, 24 insertions(+), 20 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index ba76b2db939c..c1da48d77c8e 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -12412,23 +12412,14 @@ static int intel_atomic_commit(struct drm_device *dev, > { > struct intel_atomic_state *intel_state = to_intel_atomic_state(state); > struct drm_i915_private *dev_priv = to_i915(dev); > - int ret = 0; > - > - ret = drm_atomic_helper_setup_commit(state, nonblock); > - if (ret) > - return ret; > + struct drm_crtc_state *new_crtc_state; > + struct drm_crtc *crtc; I'd prefer to see intel_ types. > + int i, ret = 0; > > drm_atomic_state_get(state); > i915_sw_fence_init(&intel_state->commit_ready, > intel_atomic_commit_ready); > > - ret = intel_atomic_prepare_commit(dev, state); > - if (ret) { > - DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret); > - i915_sw_fence_commit(&intel_state->commit_ready); > - return ret; > - } > - > /* > * The intel_legacy_cursor_update() fast path takes care > * of avoiding the vblank waits for simple cursor > @@ -12437,19 +12428,32 @@ static int intel_atomic_commit(struct drm_device *dev, > * updates happen during the correct frames. Gen9+ have > * double buffered watermarks and so shouldn't need this. > * > - * Do this after drm_atomic_helper_setup_commit() and > - * intel_atomic_prepare_commit() because we still want > - * to skip the flip and fb cleanup waits. Although that > - * does risk yanking the mapping from under the display > - * engine. > + * Unset state->legacy_cursor_update before the call to > + * drm_atomic_helper_setup_commit() because otherwise > + * drm_atomic_helper_wait_for_flip_done() is a noop and > + * we get FIFO underruns because we didn't wait > + * for vblank. > * > * FIXME doing watermarks and fb cleanup from a vblank worker > * (assuming we had any) would solve these problems. > */ > - if (INTEL_GEN(dev_priv) < 9) > - state->legacy_cursor_update = false; > + if (INTEL_GEN(dev_priv) < 9 && state->legacy_cursor_update) { > + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) > + if (to_intel_crtc_state(new_crtc_state)->wm.need_postvbl_update) > + state->legacy_cursor_update = false; > + } Hmm. I don't think we can rely on need_postvbl_update at this point. Pre-g4x code won't set it. We already made the decision to not use the fast path, so explicitly setting legacy_cursor_update=false should still be fine, no? > + > + ret = intel_atomic_prepare_commit(dev, state); > + if (ret) { > + DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret); > + i915_sw_fence_commit(&intel_state->commit_ready); > + return ret; > + } > + > + ret = drm_atomic_helper_setup_commit(state, nonblock); > + if (!ret) > + ret = drm_atomic_helper_swap_state(state, true); > > - ret = drm_atomic_helper_swap_state(state, true); > if (ret) { > i915_sw_fence_commit(&intel_state->commit_ready); > > -- > 2.14.1 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ba76b2db939c..c1da48d77c8e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12412,23 +12412,14 @@ static int intel_atomic_commit(struct drm_device *dev, { struct intel_atomic_state *intel_state = to_intel_atomic_state(state); struct drm_i915_private *dev_priv = to_i915(dev); - int ret = 0; - - ret = drm_atomic_helper_setup_commit(state, nonblock); - if (ret) - return ret; + struct drm_crtc_state *new_crtc_state; + struct drm_crtc *crtc; + int i, ret = 0; drm_atomic_state_get(state); i915_sw_fence_init(&intel_state->commit_ready, intel_atomic_commit_ready); - ret = intel_atomic_prepare_commit(dev, state); - if (ret) { - DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret); - i915_sw_fence_commit(&intel_state->commit_ready); - return ret; - } - /* * The intel_legacy_cursor_update() fast path takes care * of avoiding the vblank waits for simple cursor @@ -12437,19 +12428,32 @@ static int intel_atomic_commit(struct drm_device *dev, * updates happen during the correct frames. Gen9+ have * double buffered watermarks and so shouldn't need this. * - * Do this after drm_atomic_helper_setup_commit() and - * intel_atomic_prepare_commit() because we still want - * to skip the flip and fb cleanup waits. Although that - * does risk yanking the mapping from under the display - * engine. + * Unset state->legacy_cursor_update before the call to + * drm_atomic_helper_setup_commit() because otherwise + * drm_atomic_helper_wait_for_flip_done() is a noop and + * we get FIFO underruns because we didn't wait + * for vblank. * * FIXME doing watermarks and fb cleanup from a vblank worker * (assuming we had any) would solve these problems. */ - if (INTEL_GEN(dev_priv) < 9) - state->legacy_cursor_update = false; + if (INTEL_GEN(dev_priv) < 9 && state->legacy_cursor_update) { + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) + if (to_intel_crtc_state(new_crtc_state)->wm.need_postvbl_update) + state->legacy_cursor_update = false; + } + + ret = intel_atomic_prepare_commit(dev, state); + if (ret) { + DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret); + i915_sw_fence_commit(&intel_state->commit_ready); + return ret; + } + + ret = drm_atomic_helper_setup_commit(state, nonblock); + if (!ret) + ret = drm_atomic_helper_swap_state(state, true); - ret = drm_atomic_helper_swap_state(state, true); if (ret) { i915_sw_fence_commit(&intel_state->commit_ready);
Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed the call to wait_for_vblanks and replaced it with flip_done. Unfortunately legacy_cursor_update was unset too late, and the replacement call drm_atomic_helper_wait_for_flip_done() was a noop. Make sure that its unset before setup_commit() is called to fix this issue. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675 Testcase: kms_cursor_crc Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-by: Marta Löfstedt <marta.lofstedt@intel.com> Cc: Marta Löfstedt <marta.lofstedt@intel.com> --- drivers/gpu/drm/i915/intel_display.c | 44 ++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 20 deletions(-)