@@ -21,8 +21,9 @@ Required properties:
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
- "mg_clk" (the latter only for armada-7k-pp2).
+ - AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+ and "axi_clk" (the 2 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
@@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2:
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "gp_clk";
+ clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
@@ -792,6 +792,7 @@ struct mvpp2 {
struct clk *pp_clk;
struct clk *gop_clk;
struct clk *mg_clk;
+ struct clk *axi_clk;
/* List of pointers to port structures */
struct mvpp2_port **port_list;
@@ -7963,6 +7964,18 @@ static int mvpp2_probe(struct platform_device *pdev)
err = clk_prepare_enable(priv->mg_clk);
if (err < 0)
goto err_gop_clk;
+
+ priv->axi_clk = devm_clk_get(&pdev->dev, "axi_clk");
+ if (IS_ERR(priv->axi_clk)) {
+ err = PTR_ERR(priv->axi_clk);
+ if (err == -EPROBE_DEFER)
+ goto err_gop_clk;
+ priv->axi_clk = NULL;
+ } else {
+ err = clk_prepare_enable(priv->axi_clk);
+ if (err < 0)
+ goto err_gop_clk;
+ }
}
/* Get system's tclk rate */
@@ -8015,6 +8028,7 @@ static int mvpp2_probe(struct platform_device *pdev)
return 0;
err_mg_clk:
+ clk_disable_unprepare(priv->axi_clk);
if (priv->hw_version == MVPP22)
clk_disable_unprepare(priv->mg_clk);
err_gop_clk:
@@ -8052,6 +8066,7 @@ static int mvpp2_remove(struct platform_device *pdev)
aggr_txq->descs_dma);
}
+ clk_disable_unprepare(priv->axi_clk);
clk_disable_unprepare(priv->mg_clk);
clk_disable_unprepare(priv->pp_clk);
clk_disable_unprepare(priv->gop_clk);
On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- Changelog: v1 -> v2: - manage the -EPROBE_DEFER case - fix typos in documentation - remove useless test before clk_disable_unprepare() Documentation/devicetree/bindings/net/marvell-pp2.txt | 10 ++++++---- drivers/net/ethernet/marvell/mvpp2.c | 15 +++++++++++++++ 2 files changed, 21 insertions(+), 4 deletions(-)