diff mbox

ath10k: Retry pci probe on failure.

Message ID 1506457435-26945-1-git-send-email-greearb@candelatech.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ben Greear Sept. 26, 2017, 8:23 p.m. UTC
From: Ben Greear <greearb@candelatech.com>

This works around a problem we see when sometimes the wifi NIC does
not respond the first time.  This seems to happen especially often on
some of the 9984 NICs in mid-range platforms.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

Comments

kernel test robot Oct. 2, 2017, 11:32 a.m. UTC | #1
Hi Ben,

[auto build test ERROR on ath6kl/ath-next]
[also build test ERROR on v4.14-rc3 next-20170929]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/greearb-candelatech-com/ath10k-Retry-pci-probe-on-failure/20170930-020608
base:   https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath-next
config: arm-allmodconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> ERROR: "__bad_udelay" [drivers/net/wireless/ath/ath10k/ath10k_pci.ko] undefined!

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index e0a7b338..8f3c5b1 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3492,8 +3492,8 @@  static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
 	.get_num_banks	= ath10k_pci_get_num_banks,
 };
 
-static int ath10k_pci_probe(struct pci_dev *pdev,
-			    const struct pci_device_id *pci_dev)
+static int __ath10k_pci_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *pci_dev)
 {
 	int ret = 0;
 	struct ath10k *ar;
@@ -3668,6 +3668,22 @@  static int ath10k_pci_probe(struct pci_dev *pdev,
 	return ret;
 }
 
+static int ath10k_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *pci_dev)
+{
+	int cnt = 0;
+	int rv;
+	do {
+		rv = __ath10k_pci_probe(pdev, pci_dev);
+		if (rv == 0)
+			return rv;
+		pr_err("ath10k: failed to probe PCI : %d, retry-count: %d\n", rv, cnt);
+		udelay(10000); /* let the ath10k firmware gerbil take a small break */
+	} while (cnt++ < 10);
+	return rv;
+}
+
+
 static void ath10k_pci_remove(struct pci_dev *pdev)
 {
 	struct ath10k *ar = pci_get_drvdata(pdev);