| Message ID | 910fee2eb99b2d95e59fa6b997645b498f167022.1504037038.git.mirq-linux@rere.qmqm.pl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 29/08/2017 at 22:08, Michał Mirosław wrote: > Fix following warning at bootup: > > device-tree: Duplicate name in fb@0x00500000, renamed to "display#1" > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > --- > arch/arm/boot/dts/at91sam9m10g45ek.dts | 48 +++++++++++++++++----------------- > 1 file changed, 24 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts > index 9cf1f5163fbd..272af5867403 100644 > --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts > +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts > @@ -223,30 +223,6 @@ > fb0: fb@0x00500000 { > display = <&display0>; > status = "okay"; > - > - display0: display { Michał, thanks for your patch. Actually the DT binding requires this: Documentation/devicetree/bindings/video/atmel,lcdc.txt So it's somehow a bigger issue. Moreover, several boards have exactly the same arrangement than the at91sam9m10g45ek, so you probably need to modify them all at the same time. After a brief look at drivers/video/fbdev/atmel_lcdfb.c it seems that the name of the node is not so much important, so we can modify it (something like display0: lcd-display {}) . I suggest that you modify the binding, the board files affected and re-submit a patch. Best regards, > - bits-per-pixel = <32>; > - atmel,lcdcon-backlight; > - atmel,dmacon = <0x1>; > - atmel,lcdcon2 = <0x80008002>; > - atmel,guard-time = <9>; > - atmel,lcd-wiring-mode = "RGB"; > - > - display-timings { > - native-mode = <&timing0>; > - timing0: timing0 { > - clock-frequency = <9000000>; > - hactive = <480>; > - vactive = <272>; > - hback-porch = <1>; > - hfront-porch = <1>; > - vback-porch = <40>; > - vfront-porch = <1>; > - hsync-len = <45>; > - vsync-len = <1>; > - }; > - }; > - }; > }; > > nand0: nand@40000000 { > @@ -293,6 +269,30 @@ > }; > }; > > + display0: display { > + bits-per-pixel = <32>; > + atmel,lcdcon-backlight; > + atmel,dmacon = <0x1>; > + atmel,lcdcon2 = <0x80008002>; > + atmel,guard-time = <9>; > + atmel,lcd-wiring-mode = "RGB"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: 480x272 { > + clock-frequency = <9000000>; > + hactive = <480>; > + vactive = <272>; > + hback-porch = <1>; > + hfront-porch = <1>; > + vback-porch = <40>; > + vfront-porch = <1>; > + hsync-len = <45>; > + vsync-len = <1>; > + }; > + }; > + }; > + > pwmleds { > compatible = "pwm-leds"; > >
On Thu, Sep 14, 2017 at 06:53:30PM +0200, Nicolas Ferre wrote: > On 29/08/2017 at 22:08, Michał Mirosław wrote: > > Fix following warning at bootup: > > > > device-tree: Duplicate name in fb@0x00500000, renamed to "display#1" > > > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > > --- > > arch/arm/boot/dts/at91sam9m10g45ek.dts | 48 +++++++++++++++++----------------- > > 1 file changed, 24 insertions(+), 24 deletions(-) > > > > diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts > > index 9cf1f5163fbd..272af5867403 100644 > > --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts > > +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts > > @@ -223,30 +223,6 @@ > > fb0: fb@0x00500000 { > > display = <&display0>; > > status = "okay"; > > - > > - display0: display { > > Michał, thanks for your patch. > > Actually the DT binding requires this: > Documentation/devicetree/bindings/video/atmel,lcdc.txt > > So it's somehow a bigger issue. > Moreover, several boards have exactly the same arrangement than the > at91sam9m10g45ek, so you probably need to modify them all at the same time. > > After a brief look at drivers/video/fbdev/atmel_lcdfb.c it seems that > the name of the node is not so much important, so we can modify it > (something like display0: lcd-display {}) . > > I suggest that you modify the binding, the board files affected and > re-submit a patch. It looks like the binding documentation is wrong. The driver code does of_parse_phandle(np, "display", 0); so it expects a phandle, not a node. Best Regards, Michał Mirosław
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9cf1f5163fbd..272af5867403 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -223,30 +223,6 @@ fb0: fb@0x00500000 { display = <&display0>; status = "okay"; - - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = "RGB"; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; }; nand0: nand@40000000 { @@ -293,6 +269,30 @@ }; }; + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; + pwmleds { compatible = "pwm-leds";
Fix following warning at bootup: device-tree: Duplicate name in fb@0x00500000, renamed to "display#1" Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> --- arch/arm/boot/dts/at91sam9m10g45ek.dts | 48 +++++++++++++++++----------------- 1 file changed, 24 insertions(+), 24 deletions(-)