| Message ID | 20171003065540.11722-2-joel@jms.id.au (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Tue, 2017-10-03 at 17:25 +1030, Joel Stanley wrote: > This adds the stub of a driver for the ASPEED SoCs. The clocks are > defined and the static registration is set up. > > Signed-off-by: Joel Stanley <joel@jms.id.au> With respect to use of the Aspeed hardware, Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > v3: > - use named initlisers for aspeed_gates table > - fix clocks typo > - Move ASPEED_NUM_CLKS to the bottom of the list > - Put gates at the start of the list, so we can use them to initalise > the aspeed_gates table > - Add ASPEED_CLK_SELECTION_2 > - Set parent of network MAC gates > --- > drivers/clk/Kconfig | 12 +++ > drivers/clk/Makefile | 1 + > drivers/clk/clk-aspeed.c | 148 +++++++++++++++++++++++++++++++ > include/dt-bindings/clock/aspeed-clock.h | 42 +++++++++ > 4 files changed, 203 insertions(+) > create mode 100644 drivers/clk/clk-aspeed.c > create mode 100644 include/dt-bindings/clock/aspeed-clock.h > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig > index 1c4e1aa6767e..9abe063ef8d2 100644 > --- a/drivers/clk/Kconfig > +++ b/drivers/clk/Kconfig > @@ -142,6 +142,18 @@ config COMMON_CLK_GEMINI > This driver supports the SoC clocks on the Cortina Systems Gemini > platform, also known as SL3516 or CS3516. > > +config COMMON_CLK_ASPEED > + bool "Clock driver for Aspeed BMC SoCs" > + depends on ARCH_ASPEED || COMPILE_TEST > + default ARCH_ASPEED > + select MFD_SYSCON > + select RESET_CONTROLLER > + ---help--- > + This driver supports the SoC clocks on the Aspeed BMC platforms. > + > + The G4 and G5 series, including the ast2400 and ast2500, are supported > + by this driver. > + > config COMMON_CLK_S2MPS11 > tristate "Clock driver for S2MPS1X/S5M8767 MFD" > depends on MFD_SEC_CORE || COMPILE_TEST > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index c99f363826f0..575c68919d9b 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o > obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o > obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o > obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o > +obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o > obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o > obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o > obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o > diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c > new file mode 100644 > index 000000000000..a45eb351bb05 > --- /dev/null > +++ b/drivers/clk/clk-aspeed.c > @@ -0,0 +1,148 @@ > +/* > + * Copyright 2017 IBM Corporation > + * > + * Joel Stanley <joel@jms.id.au> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version > + * 2 of the License, or (at your option) any later version. > + */ > + > +#define pr_fmt(fmt) "clk-aspeed: " fmt > + > +#include <linux/clk-provider.h> > +#include <linux/mfd/syscon.h> > +#include <linux/of_address.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/spinlock.h> > + > +#include <dt-bindings/clock/aspeed-clock.h> > + > +#define ASPEED_STRAP 0x70 > + > +/* Keeps track of all clocks */ > +static struct clk_hw_onecell_data *aspeed_clk_data; > + > +static void __iomem *scu_base; > + > +/** > + * struct aspeed_gate_data - Aspeed gated clocks > + * @clock_idx: bit used to gate this clock in the clock register > + * @reset_idx: bit used to reset this IP in the reset register. -1 if no > + * reset is required when enabling the clock > + * @name: the clock name > + * @parent_name: the name of the parent clock > + * @flags: standard clock framework flags > + */ > +struct aspeed_gate_data { > + u8 clock_idx; > + s8 reset_idx; > + const char *name; > + const char *parent_name; > + unsigned long flags; > +}; > + > +/** > + * struct aspeed_clk_gate - Aspeed specific clk_gate structure > + * @hw: handle between common and hardware-specific interfaces > + * @reg: register controlling gate > + * @clock_idx: bit used to gate this clock in the clock register > + * @reset_idx: bit used to reset this IP in the reset register. -1 if no > + * reset is required when enabling the clock > + * @flags: hardware-specific flags > + * @lock: register lock > + * > + * Some of the clocks in the Aspeed SoC must be put in reset before enabling. > + * This modified version of clk_gate allows an optional reset bit to be > + * specified. > + */ > +struct aspeed_clk_gate { > + struct clk_hw hw; > + struct regmap *map; > + u8 clock_idx; > + s8 reset_idx; > + u8 flags; > + spinlock_t *lock; > +}; > + > +#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw) > + > +/* TODO: ask Aspeed about the actual parent data */ > +static const struct aspeed_gate_data aspeed_gates[] __initconst = { > + /* clk rst name parent flags */ > + [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ > + [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ > + [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ > + [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ > + [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ > + [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ > + [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, > + [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ > + [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ > + [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */ > + [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */ > + [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */ > + [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */ > + [ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ > + [ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ > + [ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */ > + [ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */ > + [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */ > + [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */ > + [ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */ > + [ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ > + [ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */ > + [ASPEED_CLK_GATE_SDCLKCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */ > + [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ > +}; > + > +static void __init aspeed_cc_init(struct device_node *np) > +{ > + struct regmap *map; > + u32 val; > + int ret; > + int i; > + > + scu_base = of_iomap(np, 0); > + if (IS_ERR(scu_base)) > + return; > + > + aspeed_clk_data = kzalloc(sizeof(*aspeed_clk_data) + > + sizeof(*aspeed_clk_data->hws) * ASPEED_NUM_CLKS, > + GFP_KERNEL); > + if (!aspeed_clk_data) > + return; > + > + /* > + * This way all clocks fetched before the platform device probes, > + * except those we assign here for early use, will be deferred. > + */ > + for (i = 0; i < ASPEED_NUM_CLKS; i++) > + aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); > + > + map = syscon_node_to_regmap(np); > + if (IS_ERR(map)) { > + pr_err("no syscon regmap\n"); > + return; > + } > + /* > + * We check that the regmap works on this very first access, > + * but as this is an MMIO-backed regmap, subsequent regmap > + * access is not going to fail and we skip error checks from > + * this point. > + */ > + ret = regmap_read(map, ASPEED_STRAP, &val); > + if (ret) { > + pr_err("failed to read strapping register\n"); > + return; > + } > + > + aspeed_clk_data->num = ASPEED_NUM_CLKS; > + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data); > + if (ret) > + pr_err("failed to add DT provider: %d\n", ret); > +}; > +CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init); > +CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init); > diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h > new file mode 100644 > index 000000000000..4a99421d77c8 > --- /dev/null > +++ b/include/dt-bindings/clock/aspeed-clock.h > @@ -0,0 +1,42 @@ > +#ifndef DT_BINDINGS_ASPEED_CLOCK_H > +#define DT_BINDINGS_ASPEED_CLOCK_H > + > +#define ASPEED_CLK_GATE_ECLK 0 > +#define ASPEED_CLK_GATE_GCLK 1 > +#define ASPEED_CLK_GATE_MCLK 2 > +#define ASPEED_CLK_GATE_VCLK 3 > +#define ASPEED_CLK_GATE_BCLK 4 > +#define ASPEED_CLK_GATE_DCLK 5 > +#define ASPEED_CLK_GATE_REFCLK 6 > +#define ASPEED_CLK_GATE_USBPORT2CLK 7 > +#define ASPEED_CLK_GATE_LCLK 8 > +#define ASPEED_CLK_GATE_USBUHCICLK 9 > +#define ASPEED_CLK_GATE_D1CLK 10 > +#define ASPEED_CLK_GATE_YCLK 11 > +#define ASPEED_CLK_GATE_USBPORT1CLK 12 > +#define ASPEED_CLK_GATE_UART1CLK 13 > +#define ASPEED_CLK_GATE_UART2CLK 14 > +#define ASPEED_CLK_GATE_UART5CLK 15 > +#define ASPEED_CLK_GATE_ESPICLK 16 > +#define ASPEED_CLK_GATE_MAC1CLK 17 > +#define ASPEED_CLK_GATE_MAC2CLK 18 > +#define ASPEED_CLK_GATE_RSACLK 19 > +#define ASPEED_CLK_GATE_UART3CLK 20 > +#define ASPEED_CLK_GATE_UART4CLK 21 > +#define ASPEED_CLK_GATE_SDCLKCLK 22 > +#define ASPEED_CLK_GATE_LHCCLK 23 > +#define ASPEED_CLK_HPLL 24 > +#define ASPEED_CLK_AHB 25 > +#define ASPEED_CLK_APB 26 > +#define ASPEED_CLK_UART 27 > +#define ASPEED_CLK_SDIO 28 > +#define ASPEED_CLK_ECLK 29 > +#define ASPEED_CLK_ECLK_MUX 30 > +#define ASPEED_CLK_LHCLK 31 > +#define ASPEED_CLK_MAC 32 > +#define ASPEED_CLK_BCLK 33 > +#define ASPEED_CLK_MPLL 34 > + > +#define ASPEED_NUM_CLKS 35 > + > +#endif
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 1c4e1aa6767e..9abe063ef8d2 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -142,6 +142,18 @@ config COMMON_CLK_GEMINI This driver supports the SoC clocks on the Cortina Systems Gemini platform, also known as SL3516 or CS3516. +config COMMON_CLK_ASPEED + bool "Clock driver for Aspeed BMC SoCs" + depends on ARCH_ASPEED || COMPILE_TEST + default ARCH_ASPEED + select MFD_SYSCON + select RESET_CONTROLLER + ---help--- + This driver supports the SoC clocks on the Aspeed BMC platforms. + + The G4 and G5 series, including the ast2400 and ast2500, are supported + by this driver. + config COMMON_CLK_S2MPS11 tristate "Clock driver for S2MPS1X/S5M8767 MFD" depends on MFD_SEC_CORE || COMPILE_TEST diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index c99f363826f0..575c68919d9b 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o +obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c new file mode 100644 index 000000000000..a45eb351bb05 --- /dev/null +++ b/drivers/clk/clk-aspeed.c @@ -0,0 +1,148 @@ +/* + * Copyright 2017 IBM Corporation + * + * Joel Stanley <joel@jms.id.au> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define pr_fmt(fmt) "clk-aspeed: " fmt + +#include <linux/clk-provider.h> +#include <linux/mfd/syscon.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include <dt-bindings/clock/aspeed-clock.h> + +#define ASPEED_STRAP 0x70 + +/* Keeps track of all clocks */ +static struct clk_hw_onecell_data *aspeed_clk_data; + +static void __iomem *scu_base; + +/** + * struct aspeed_gate_data - Aspeed gated clocks + * @clock_idx: bit used to gate this clock in the clock register + * @reset_idx: bit used to reset this IP in the reset register. -1 if no + * reset is required when enabling the clock + * @name: the clock name + * @parent_name: the name of the parent clock + * @flags: standard clock framework flags + */ +struct aspeed_gate_data { + u8 clock_idx; + s8 reset_idx; + const char *name; + const char *parent_name; + unsigned long flags; +}; + +/** + * struct aspeed_clk_gate - Aspeed specific clk_gate structure + * @hw: handle between common and hardware-specific interfaces + * @reg: register controlling gate + * @clock_idx: bit used to gate this clock in the clock register + * @reset_idx: bit used to reset this IP in the reset register. -1 if no + * reset is required when enabling the clock + * @flags: hardware-specific flags + * @lock: register lock + * + * Some of the clocks in the Aspeed SoC must be put in reset before enabling. + * This modified version of clk_gate allows an optional reset bit to be + * specified. + */ +struct aspeed_clk_gate { + struct clk_hw hw; + struct regmap *map; + u8 clock_idx; + s8 reset_idx; + u8 flags; + spinlock_t *lock; +}; + +#define to_aspeed_clk_gate(_hw) container_of(_hw, struct aspeed_clk_gate, hw) + +/* TODO: ask Aspeed about the actual parent data */ +static const struct aspeed_gate_data aspeed_gates[] __initconst = { + /* clk rst name parent flags */ + [ASPEED_CLK_GATE_ECLK] = { 0, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ + [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ + [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ + [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ + [ASPEED_CLK_GATE_BCLK] = { 4, 10, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ + [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ + [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, + [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ + [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ + [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */ + [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", NULL, 0 }, /* GFX CRT */ + [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */ + [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */ + [ASPEED_CLK_GATE_UART1CLK] = { 15, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ + [ASPEED_CLK_GATE_UART2CLK] = { 16, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ + [ASPEED_CLK_GATE_UART5CLK] = { 17, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */ + [ASPEED_CLK_GATE_ESPICLK] = { 19, -1, "espiclk-gate", NULL, 0 }, /* eSPI */ + [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac", 0 }, /* MAC1 */ + [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac", 0 }, /* MAC2 */ + [ASPEED_CLK_GATE_RSACLK] = { 24, -1, "rsaclk-gate", NULL, 0 }, /* RSA */ + [ASPEED_CLK_GATE_UART3CLK] = { 25, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ + [ASPEED_CLK_GATE_UART4CLK] = { 26, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */ + [ASPEED_CLK_GATE_SDCLKCLK] = { 27, 16, "sdclk-gate", NULL, 0 }, /* SDIO/SD */ + [ASPEED_CLK_GATE_LHCCLK] = { 28, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ +}; + +static void __init aspeed_cc_init(struct device_node *np) +{ + struct regmap *map; + u32 val; + int ret; + int i; + + scu_base = of_iomap(np, 0); + if (IS_ERR(scu_base)) + return; + + aspeed_clk_data = kzalloc(sizeof(*aspeed_clk_data) + + sizeof(*aspeed_clk_data->hws) * ASPEED_NUM_CLKS, + GFP_KERNEL); + if (!aspeed_clk_data) + return; + + /* + * This way all clocks fetched before the platform device probes, + * except those we assign here for early use, will be deferred. + */ + for (i = 0; i < ASPEED_NUM_CLKS; i++) + aspeed_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); + + map = syscon_node_to_regmap(np); + if (IS_ERR(map)) { + pr_err("no syscon regmap\n"); + return; + } + /* + * We check that the regmap works on this very first access, + * but as this is an MMIO-backed regmap, subsequent regmap + * access is not going to fail and we skip error checks from + * this point. + */ + ret = regmap_read(map, ASPEED_STRAP, &val); + if (ret) { + pr_err("failed to read strapping register\n"); + return; + } + + aspeed_clk_data->num = ASPEED_NUM_CLKS; + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_clk_data); + if (ret) + pr_err("failed to add DT provider: %d\n", ret); +}; +CLK_OF_DECLARE_DRIVER(aspeed_cc_g5, "aspeed,ast2500-scu", aspeed_cc_init); +CLK_OF_DECLARE_DRIVER(aspeed_cc_g4, "aspeed,ast2400-scu", aspeed_cc_init); diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h new file mode 100644 index 000000000000..4a99421d77c8 --- /dev/null +++ b/include/dt-bindings/clock/aspeed-clock.h @@ -0,0 +1,42 @@ +#ifndef DT_BINDINGS_ASPEED_CLOCK_H +#define DT_BINDINGS_ASPEED_CLOCK_H + +#define ASPEED_CLK_GATE_ECLK 0 +#define ASPEED_CLK_GATE_GCLK 1 +#define ASPEED_CLK_GATE_MCLK 2 +#define ASPEED_CLK_GATE_VCLK 3 +#define ASPEED_CLK_GATE_BCLK 4 +#define ASPEED_CLK_GATE_DCLK 5 +#define ASPEED_CLK_GATE_REFCLK 6 +#define ASPEED_CLK_GATE_USBPORT2CLK 7 +#define ASPEED_CLK_GATE_LCLK 8 +#define ASPEED_CLK_GATE_USBUHCICLK 9 +#define ASPEED_CLK_GATE_D1CLK 10 +#define ASPEED_CLK_GATE_YCLK 11 +#define ASPEED_CLK_GATE_USBPORT1CLK 12 +#define ASPEED_CLK_GATE_UART1CLK 13 +#define ASPEED_CLK_GATE_UART2CLK 14 +#define ASPEED_CLK_GATE_UART5CLK 15 +#define ASPEED_CLK_GATE_ESPICLK 16 +#define ASPEED_CLK_GATE_MAC1CLK 17 +#define ASPEED_CLK_GATE_MAC2CLK 18 +#define ASPEED_CLK_GATE_RSACLK 19 +#define ASPEED_CLK_GATE_UART3CLK 20 +#define ASPEED_CLK_GATE_UART4CLK 21 +#define ASPEED_CLK_GATE_SDCLKCLK 22 +#define ASPEED_CLK_GATE_LHCCLK 23 +#define ASPEED_CLK_HPLL 24 +#define ASPEED_CLK_AHB 25 +#define ASPEED_CLK_APB 26 +#define ASPEED_CLK_UART 27 +#define ASPEED_CLK_SDIO 28 +#define ASPEED_CLK_ECLK 29 +#define ASPEED_CLK_ECLK_MUX 30 +#define ASPEED_CLK_LHCLK 31 +#define ASPEED_CLK_MAC 32 +#define ASPEED_CLK_BCLK 33 +#define ASPEED_CLK_MPLL 34 + +#define ASPEED_NUM_CLKS 35 + +#endif
This adds the stub of a driver for the ASPEED SoCs. The clocks are defined and the static registration is set up. Signed-off-by: Joel Stanley <joel@jms.id.au> --- v3: - use named initlisers for aspeed_gates table - fix clocks typo - Move ASPEED_NUM_CLKS to the bottom of the list - Put gates at the start of the list, so we can use them to initalise the aspeed_gates table - Add ASPEED_CLK_SELECTION_2 - Set parent of network MAC gates --- drivers/clk/Kconfig | 12 +++ drivers/clk/Makefile | 1 + drivers/clk/clk-aspeed.c | 148 +++++++++++++++++++++++++++++++ include/dt-bindings/clock/aspeed-clock.h | 42 +++++++++ 4 files changed, 203 insertions(+) create mode 100644 drivers/clk/clk-aspeed.c create mode 100644 include/dt-bindings/clock/aspeed-clock.h