| Message ID | 1507548926-9555-10-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/09/2017 01:35 PM, Chaotian Jing wrote: > mt2712 supports stop_clk fix and enhance_rx, which can improve > host stability. > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > --- > drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 43 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index 555824d..5d99e05 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -67,6 +67,7 @@ > #define SDC_RESP2 0x48 > #define SDC_RESP3 0x4c > #define SDC_BLK_NUM 0x50 > +#define SDC_ADV_CFG0 0x64 > #define EMMC_IOCON 0x7c > #define SDC_ACMD_RESP 0x80 > #define MSDC_DMA_SA 0x90 > @@ -80,6 +81,7 @@ > #define PAD_DS_TUNE 0x188 > #define PAD_CMD_TUNE 0x18c > #define EMMC50_CFG0 0x208 > +#define SDC_FIFO_CFG 0x228 > > /*--------------------------------------------------------------------------*/ > /* Register Mask */ > @@ -188,6 +190,9 @@ > #define SDC_STS_CMDBUSY (0x1 << 1) /* RW */ > #define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */ > > +/* SDC_ADV_CFG0 mask */ > +#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */ > + > /* MSDC_DMA_CTRL mask */ > #define MSDC_DMA_CTRL_START (0x1 << 0) /* W */ > #define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */ > @@ -217,6 +222,8 @@ > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > +#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ > + > #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ > #define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */ > #define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */ > @@ -242,6 +249,9 @@ > #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ > #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ > > +#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */ > +#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */ > + > #define REQ_CMD_EIO (0x1 << 0) > #define REQ_CMD_TMO (0x1 << 1) > #define REQ_DAT_ERR (0x1 << 2) > @@ -308,6 +318,7 @@ struct msdc_save_para { > u32 pad_ds_tune; > u32 pad_cmd_tune; > u32 emmc50_cfg0; > + u32 sdc_fifo_cfg; > }; > > struct mtk_mmc_compatible { > @@ -316,6 +327,8 @@ struct mtk_mmc_compatible { > bool async_fifo; > bool data_tune; > bool busy_check; > + bool stop_clk_fix; > + bool enhance_rx; > }; > > struct msdc_tune_para { > @@ -381,6 +394,8 @@ struct msdc_host { > .async_fifo = false, > .data_tune = false, > .busy_check = false, > + .stop_clk_fix = false, > + .enhance_rx = false, > }; > > static const struct mtk_mmc_compatible mt8173_compat = { > @@ -389,6 +404,8 @@ struct msdc_host { > .async_fifo = false, > .data_tune = false, > .busy_check = false, > + .stop_clk_fix = false, > + .enhance_rx = false, > }; > If you add a flag for hs400_tune then mt8173_compat and mt8135_compat will be actually different and therefore it will make sense that they exist both in the driver code. Regards, Matthias > static const struct mtk_mmc_compatible mt2701_compat = { > @@ -397,6 +414,8 @@ struct msdc_host { > .async_fifo = true, > .data_tune = true, > .busy_check = false, > + .stop_clk_fix = false, > + .enhance_rx = false, > }; > > static const struct mtk_mmc_compatible mt2712_compat = { > @@ -405,6 +424,8 @@ struct msdc_host { > .async_fifo = true, > .data_tune = true, > .busy_check = true, > + .stop_clk_fix = true, > + .enhance_rx = true, > }; > > static const struct of_device_id msdc_of_ids[] = { > @@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host) > sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); > writel(0xffff4089, host->base + MSDC_PATCH_BIT1); > sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); > + > + if (host->dev_comp->stop_clk_fix) { > + sdr_set_field(host->base + MSDC_PATCH_BIT1, > + MSDC_PATCH_BIT1_STOP_DLY, 3); > + sdr_clr_bits(host->base + SDC_FIFO_CFG, > + SDC_FIFO_CFG_WRVALIDSEL); > + sdr_clr_bits(host->base + SDC_FIFO_CFG, > + SDC_FIFO_CFG_RDVALIDSEL); > + } > + > if (host->dev_comp->busy_check) > sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7)); > + > if (host->dev_comp->async_fifo) { > sdr_set_field(host->base + MSDC_PATCH_BIT2, > MSDC_PB2_RESPWAIT, 3); > - sdr_set_field(host->base + MSDC_PATCH_BIT2, > - MSDC_PB2_RESPSTSENSEL, 2); > - sdr_set_field(host->base + MSDC_PATCH_BIT2, > - MSDC_PB2_CRCSTSENSEL, 2); > + if (host->dev_comp->enhance_rx) { > + sdr_set_bits(host->base + SDC_ADV_CFG0, > + SDC_RX_ENHANCE_EN); > + } else { > + sdr_set_field(host->base + MSDC_PATCH_BIT2, > + MSDC_PB2_RESPSTSENSEL, 2); > + sdr_set_field(host->base + MSDC_PATCH_BIT2, > + MSDC_PB2_CRCSTSENSEL, 2); > + } > /* use async fifo, then no need tune internal delay */ > sdr_clr_bits(host->base + MSDC_PATCH_BIT2, > MSDC_PATCH_BIT2_CFGRESP); > @@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host) > host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); > host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE); > host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); > + host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG); > } > > static void msdc_restore_reg(struct msdc_host *host) > @@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host) > writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); > writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE); > writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); > + writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG); > } > > static int msdc_runtime_suspend(struct device *dev) > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2017-10-09 at 17:00 +0200, Matthias Brugger wrote: > > On 10/09/2017 01:35 PM, Chaotian Jing wrote: > > mt2712 supports stop_clk fix and enhance_rx, which can improve > > host stability. > > > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > --- > > drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- > > 1 file changed, 43 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > > index 555824d..5d99e05 100644 > > --- a/drivers/mmc/host/mtk-sd.c > > +++ b/drivers/mmc/host/mtk-sd.c > > @@ -67,6 +67,7 @@ > > #define SDC_RESP2 0x48 > > #define SDC_RESP3 0x4c > > #define SDC_BLK_NUM 0x50 > > +#define SDC_ADV_CFG0 0x64 > > #define EMMC_IOCON 0x7c > > #define SDC_ACMD_RESP 0x80 > > #define MSDC_DMA_SA 0x90 > > @@ -80,6 +81,7 @@ > > #define PAD_DS_TUNE 0x188 > > #define PAD_CMD_TUNE 0x18c > > #define EMMC50_CFG0 0x208 > > +#define SDC_FIFO_CFG 0x228 > > > > /*--------------------------------------------------------------------------*/ > > /* Register Mask */ > > @@ -188,6 +190,9 @@ > > #define SDC_STS_CMDBUSY (0x1 << 1) /* RW */ > > #define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */ > > > > +/* SDC_ADV_CFG0 mask */ > > +#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */ > > + > > /* MSDC_DMA_CTRL mask */ > > #define MSDC_DMA_CTRL_START (0x1 << 0) /* W */ > > #define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */ > > @@ -217,6 +222,8 @@ > > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > > > +#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ > > + > > #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ > > #define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */ > > #define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */ > > @@ -242,6 +249,9 @@ > > #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ > > #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ > > > > +#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */ > > +#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */ > > + > > #define REQ_CMD_EIO (0x1 << 0) > > #define REQ_CMD_TMO (0x1 << 1) > > #define REQ_DAT_ERR (0x1 << 2) > > @@ -308,6 +318,7 @@ struct msdc_save_para { > > u32 pad_ds_tune; > > u32 pad_cmd_tune; > > u32 emmc50_cfg0; > > + u32 sdc_fifo_cfg; > > }; > > > > struct mtk_mmc_compatible { > > @@ -316,6 +327,8 @@ struct mtk_mmc_compatible { > > bool async_fifo; > > bool data_tune; > > bool busy_check; > > + bool stop_clk_fix; > > + bool enhance_rx; > > }; > > > > struct msdc_tune_para { > > @@ -381,6 +394,8 @@ struct msdc_host { > > .async_fifo = false, > > .data_tune = false, > > .busy_check = false, > > + .stop_clk_fix = false, > > + .enhance_rx = false, > > }; > > > > static const struct mtk_mmc_compatible mt8173_compat = { > > @@ -389,6 +404,8 @@ struct msdc_host { > > .async_fifo = false, > > .data_tune = false, > > .busy_check = false, > > + .stop_clk_fix = false, > > + .enhance_rx = false, > > }; > > > > If you add a flag for hs400_tune then mt8173_compat and mt8135_compat will be > actually different and therefore it will make sense that they exist both in the > driver code. > Sure, it's okay. > Regards, > Matthias > > > static const struct mtk_mmc_compatible mt2701_compat = { > > @@ -397,6 +414,8 @@ struct msdc_host { > > .async_fifo = true, > > .data_tune = true, > > .busy_check = false, > > + .stop_clk_fix = false, > > + .enhance_rx = false, > > }; > > > > static const struct mtk_mmc_compatible mt2712_compat = { > > @@ -405,6 +424,8 @@ struct msdc_host { > > .async_fifo = true, > > .data_tune = true, > > .busy_check = true, > > + .stop_clk_fix = true, > > + .enhance_rx = true, > > }; > > > > static const struct of_device_id msdc_of_ids[] = { > > @@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host) > > sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); > > writel(0xffff4089, host->base + MSDC_PATCH_BIT1); > > sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); > > + > > + if (host->dev_comp->stop_clk_fix) { > > + sdr_set_field(host->base + MSDC_PATCH_BIT1, > > + MSDC_PATCH_BIT1_STOP_DLY, 3); > > + sdr_clr_bits(host->base + SDC_FIFO_CFG, > > + SDC_FIFO_CFG_WRVALIDSEL); > > + sdr_clr_bits(host->base + SDC_FIFO_CFG, > > + SDC_FIFO_CFG_RDVALIDSEL); > > + } > > + > > if (host->dev_comp->busy_check) > > sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7)); > > + > > if (host->dev_comp->async_fifo) { > > sdr_set_field(host->base + MSDC_PATCH_BIT2, > > MSDC_PB2_RESPWAIT, 3); > > - sdr_set_field(host->base + MSDC_PATCH_BIT2, > > - MSDC_PB2_RESPSTSENSEL, 2); > > - sdr_set_field(host->base + MSDC_PATCH_BIT2, > > - MSDC_PB2_CRCSTSENSEL, 2); > > + if (host->dev_comp->enhance_rx) { > > + sdr_set_bits(host->base + SDC_ADV_CFG0, > > + SDC_RX_ENHANCE_EN); > > + } else { > > + sdr_set_field(host->base + MSDC_PATCH_BIT2, > > + MSDC_PB2_RESPSTSENSEL, 2); > > + sdr_set_field(host->base + MSDC_PATCH_BIT2, > > + MSDC_PB2_CRCSTSENSEL, 2); > > + } > > /* use async fifo, then no need tune internal delay */ > > sdr_clr_bits(host->base + MSDC_PATCH_BIT2, > > MSDC_PATCH_BIT2_CFGRESP); > > @@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host) > > host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); > > host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE); > > host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); > > + host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG); > > } > > > > static void msdc_restore_reg(struct msdc_host *host) > > @@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host) > > writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); > > writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE); > > writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); > > + writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG); > > } > > > > static int msdc_runtime_suspend(struct device *dev) > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 555824d..5d99e05 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -67,6 +67,7 @@ #define SDC_RESP2 0x48 #define SDC_RESP3 0x4c #define SDC_BLK_NUM 0x50 +#define SDC_ADV_CFG0 0x64 #define EMMC_IOCON 0x7c #define SDC_ACMD_RESP 0x80 #define MSDC_DMA_SA 0x90 @@ -80,6 +81,7 @@ #define PAD_DS_TUNE 0x188 #define PAD_CMD_TUNE 0x18c #define EMMC50_CFG0 0x208 +#define SDC_FIFO_CFG 0x228 /*--------------------------------------------------------------------------*/ /* Register Mask */ @@ -188,6 +190,9 @@ #define SDC_STS_CMDBUSY (0x1 << 1) /* RW */ #define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */ +/* SDC_ADV_CFG0 mask */ +#define SDC_RX_ENHANCE_EN (0x1 << 20) /* RW */ + /* MSDC_DMA_CTRL mask */ #define MSDC_DMA_CTRL_START (0x1 << 0) /* W */ #define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */ @@ -217,6 +222,8 @@ #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ +#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */ + #define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */ #define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */ #define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */ @@ -242,6 +249,9 @@ #define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ #define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ +#define SDC_FIFO_CFG_WRVALIDSEL (0x1 << 24) /* RW */ +#define SDC_FIFO_CFG_RDVALIDSEL (0x1 << 25) /* RW */ + #define REQ_CMD_EIO (0x1 << 0) #define REQ_CMD_TMO (0x1 << 1) #define REQ_DAT_ERR (0x1 << 2) @@ -308,6 +318,7 @@ struct msdc_save_para { u32 pad_ds_tune; u32 pad_cmd_tune; u32 emmc50_cfg0; + u32 sdc_fifo_cfg; }; struct mtk_mmc_compatible { @@ -316,6 +327,8 @@ struct mtk_mmc_compatible { bool async_fifo; bool data_tune; bool busy_check; + bool stop_clk_fix; + bool enhance_rx; }; struct msdc_tune_para { @@ -381,6 +394,8 @@ struct msdc_host { .async_fifo = false, .data_tune = false, .busy_check = false, + .stop_clk_fix = false, + .enhance_rx = false, }; static const struct mtk_mmc_compatible mt8173_compat = { @@ -389,6 +404,8 @@ struct msdc_host { .async_fifo = false, .data_tune = false, .busy_check = false, + .stop_clk_fix = false, + .enhance_rx = false, }; static const struct mtk_mmc_compatible mt2701_compat = { @@ -397,6 +414,8 @@ struct msdc_host { .async_fifo = true, .data_tune = true, .busy_check = false, + .stop_clk_fix = false, + .enhance_rx = false, }; static const struct mtk_mmc_compatible mt2712_compat = { @@ -405,6 +424,8 @@ struct msdc_host { .async_fifo = true, .data_tune = true, .busy_check = true, + .stop_clk_fix = true, + .enhance_rx = true, }; static const struct of_device_id msdc_of_ids[] = { @@ -1281,15 +1302,31 @@ static void msdc_init_hw(struct msdc_host *host) sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); writel(0xffff4089, host->base + MSDC_PATCH_BIT1); sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); + + if (host->dev_comp->stop_clk_fix) { + sdr_set_field(host->base + MSDC_PATCH_BIT1, + MSDC_PATCH_BIT1_STOP_DLY, 3); + sdr_clr_bits(host->base + SDC_FIFO_CFG, + SDC_FIFO_CFG_WRVALIDSEL); + sdr_clr_bits(host->base + SDC_FIFO_CFG, + SDC_FIFO_CFG_RDVALIDSEL); + } + if (host->dev_comp->busy_check) sdr_clr_bits(host->base + MSDC_PATCH_BIT1, (1 << 7)); + if (host->dev_comp->async_fifo) { sdr_set_field(host->base + MSDC_PATCH_BIT2, MSDC_PB2_RESPWAIT, 3); - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_RESPSTSENSEL, 2); - sdr_set_field(host->base + MSDC_PATCH_BIT2, - MSDC_PB2_CRCSTSENSEL, 2); + if (host->dev_comp->enhance_rx) { + sdr_set_bits(host->base + SDC_ADV_CFG0, + SDC_RX_ENHANCE_EN); + } else { + sdr_set_field(host->base + MSDC_PATCH_BIT2, + MSDC_PB2_RESPSTSENSEL, 2); + sdr_set_field(host->base + MSDC_PATCH_BIT2, + MSDC_PB2_CRCSTSENSEL, 2); + } /* use async fifo, then no need tune internal delay */ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGRESP); @@ -1946,6 +1983,7 @@ static void msdc_save_reg(struct msdc_host *host) host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE); host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); + host->save_para.sdc_fifo_cfg = readl(host->base + SDC_FIFO_CFG); } static void msdc_restore_reg(struct msdc_host *host) @@ -1964,6 +2002,7 @@ static void msdc_restore_reg(struct msdc_host *host) writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE); writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); + writel(host->save_para.sdc_fifo_cfg, host->base + SDC_FIFO_CFG); } static int msdc_runtime_suspend(struct device *dev)
mt2712 supports stop_clk fix and enhance_rx, which can improve host stability. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- drivers/mmc/host/mtk-sd.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 4 deletions(-)