Message ID | 20171002142129.13102-1-linus.walleij@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Linus, On 2017/10/2 15:21, Linus Walleij wrote: > The hi6220-HiKey board started to name GPIO lines for > 96boards, using just the plain names "GPIO-A" etc from the > 96boards specification. > > Poplar started to use an arbitrary "LS-GPIO-A" (etc) prefix > that is not part of the 96boards specification. > > As the former notation arrived first, and we need > consistency among 96board, rectify the Poplar board to use > this too. This is important for userspace that wants to > look up GPIO names from these strings. > > Cc: Jiancheng Xue <xuejiancheng@hisilicon.com> > Cc: Alex Elder <elder@linaro.org> > Cc: Peter Griffin <peter.griffin@linaro.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- Applied to hisilicon dt tree. Thanks! BR, Wei > arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > index b9142871d6fe..a6fd13389f8d 100644 > --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts > @@ -78,17 +78,17 @@ > > &gpio1 { > status = "okay"; > - gpio-line-names = "LS-GPIO-E", "", > + gpio-line-names = "GPIO-E", "", > "", "", > - "", "LS-GPIO-F", > - "", "LS-GPIO-J"; > + "", "GPIO-F", > + "", "GPIO-J"; > }; > > &gpio2 { > status = "okay"; > - gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", > - "LS-GPIO-L", "LS-GPIO-G", > - "LS-GPIO-K", "", > + gpio-line-names = "GPIO-H", "GPIO-I", > + "GPIO-L", "GPIO-G", > + "GPIO-K", "", > "", ""; > }; > > @@ -96,15 +96,15 @@ > status = "okay"; > gpio-line-names = "", "", > "", "", > - "LS-GPIO-C", "", > - "", "LS-GPIO-B"; > + "GPIO-C", "", > + "", "GPIO-B"; > }; > > &gpio4 { > status = "okay"; > gpio-line-names = "", "", > "", "", > - "", "LS-GPIO-D", > + "", "GPIO-D", > "", ""; > }; > > @@ -112,7 +112,7 @@ > status = "okay"; > gpio-line-names = "", "USER-LED-1", > "USER-LED-2", "", > - "", "LS-GPIO-A", > + "", "GPIO-A", > "", ""; > }; > >
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index b9142871d6fe..a6fd13389f8d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -78,17 +78,17 @@ &gpio1 { status = "okay"; - gpio-line-names = "LS-GPIO-E", "", + gpio-line-names = "GPIO-E", "", "", "", - "", "LS-GPIO-F", - "", "LS-GPIO-J"; + "", "GPIO-F", + "", "GPIO-J"; }; &gpio2 { status = "okay"; - gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", - "LS-GPIO-L", "LS-GPIO-G", - "LS-GPIO-K", "", + gpio-line-names = "GPIO-H", "GPIO-I", + "GPIO-L", "GPIO-G", + "GPIO-K", "", "", ""; }; @@ -96,15 +96,15 @@ status = "okay"; gpio-line-names = "", "", "", "", - "LS-GPIO-C", "", - "", "LS-GPIO-B"; + "GPIO-C", "", + "", "GPIO-B"; }; &gpio4 { status = "okay"; gpio-line-names = "", "", "", "", - "", "LS-GPIO-D", + "", "GPIO-D", "", ""; }; @@ -112,7 +112,7 @@ status = "okay"; gpio-line-names = "", "USER-LED-1", "USER-LED-2", "", - "", "LS-GPIO-A", + "", "GPIO-A", "", ""; };
The hi6220-HiKey board started to name GPIO lines for 96boards, using just the plain names "GPIO-A" etc from the 96boards specification. Poplar started to use an arbitrary "LS-GPIO-A" (etc) prefix that is not part of the 96boards specification. As the former notation arrived first, and we need consistency among 96board, rectify the Poplar board to use this too. This is important for userspace that wants to look up GPIO names from these strings. Cc: Jiancheng Xue <xuejiancheng@hisilicon.com> Cc: Alex Elder <elder@linaro.org> Cc: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)