| Message ID | 20171012192719.15193-2-bparrot@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Benoit Parrot <bparrot@ti.com> [171012 12:29]: > This patch adds the required dtsi node to support the Camera > Adaptation Layer (CAL) for the DRA72 family of devices. > > - Added CAL entry in dra72x.dtsi. > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > --- > arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi > index 67107605fb4c..d0ba4f238084 100644 > --- a/arch/arm/boot/dts/dra72x.dtsi > +++ b/arch/arm/boot/dts/dra72x.dtsi > @@ -17,6 +17,37 @@ > interrupt-parent = <&wakeupgen>; > interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > }; > + > + ocp { > + cal: cal@4845b000 { > + compatible = "ti,dra72-cal"; > + ti,hwmods = "cal"; > + reg = <0x4845B000 0x400>, > + <0x4845B800 0x40>, > + <0x4845B900 0x40>, > + <0x4A002e94 0x4>; Care to fix the cAmelcasing here? All lower case hex is pretty much the standard with linux, so might as well lower case them all while at it. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren <tony@atomide.com> wrote on Fri [2017-Oct-13 09:54:09 -0700]: > * Benoit Parrot <bparrot@ti.com> [171012 12:29]: > > This patch adds the required dtsi node to support the Camera > > Adaptation Layer (CAL) for the DRA72 family of devices. > > > > - Added CAL entry in dra72x.dtsi. > > > > Signed-off-by: Benoit Parrot <bparrot@ti.com> > > --- > > arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ > > 1 file changed, 31 insertions(+) > > > > diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi > > index 67107605fb4c..d0ba4f238084 100644 > > --- a/arch/arm/boot/dts/dra72x.dtsi > > +++ b/arch/arm/boot/dts/dra72x.dtsi > > @@ -17,6 +17,37 @@ > > interrupt-parent = <&wakeupgen>; > > interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > > }; > > + > > + ocp { > > + cal: cal@4845b000 { > > + compatible = "ti,dra72-cal"; > > + ti,hwmods = "cal"; > > + reg = <0x4845B000 0x400>, > > + <0x4845B800 0x40>, > > + <0x4845B900 0x40>, > > + <0x4A002e94 0x4>; > > Care to fix the cAmelcasing here? All lower case hex is pretty much the > standard with linux, so might as well lower case them all while at it. Sure thing, I'll fix it. Benoit > > Regards, > > Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 67107605fb4c..d0ba4f238084 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -17,6 +17,37 @@ interrupt-parent = <&wakeupgen>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; + + ocp { + cal: cal@4845b000 { + compatible = "ti,dra72-cal"; + ti,hwmods = "cal"; + reg = <0x4845B000 0x400>, + <0x4845B800 0x40>, + <0x4845B900 0x40>, + <0x4A002e94 0x4>; + reg-names = "cal_top", + "cal_rx_core0", + "cal_rx_core1", + "camerrx_control"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + csi2_1: port@1 { + reg = <1>; + }; + }; + }; + }; }; &dss {
This patch adds the required dtsi node to support the Camera Adaptation Layer (CAL) for the DRA72 family of devices. - Added CAL entry in dra72x.dtsi. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm/boot/dts/dra72x.dtsi | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)