| Message ID | d83c9cb9a88677c97272e2b8c08d8f15a33391b7.1508231063.git-series.maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, Oct 17, 2017 at 5:06 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The display pipeline on the A83T is mainly composed of the mixers and > TCONs, plus various encoders. > > Let's add the mixers and TCONs to the DTSI. You are only adding half of them, i.e. only the first pipeline. Please mention why. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/sun8i-a83t.dtsi | 80 ++++++++++++++++++++++++++++++++- > 1 file changed, 80 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > index ce6e887c8938..57feeb6fee8b 100644 > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > @@ -151,6 +151,12 @@ > }; > }; > > + de: display-engine { > + compatible = "allwinner,sun8i-a83t-display-engine"; > + allwinner,pipelines = <&mixer0>; > + status = "disabled"; > + }; > + > memory { > reg = <0x40000000 0x80000000>; > device_type = "memory"; > @@ -162,6 +168,46 @@ > #size-cells = <1>; > ranges; > > + display_clocks: clock@1000000 { > + compatible = "allwinner,sun8i-a83t-de2-clk"; > + reg = <0x01000000 0x100000>; > + clocks = <&ccu CLK_PLL_DE>, > + <&ccu CLK_BUS_DE>; > + clock-names = "mod", > + "bus"; > + resets = <&ccu RST_BUS_DE>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + mixer0: mixer@1100000 { > + compatible = "allwinner,sun8i-a83t-de2-mixer"; > + reg = <0x01100000 0x100000>; > + clocks = <&display_clocks 0>, > + <&display_clocks 6>; > + clock-names = "bus", > + "mod"; > + resets = <&display_clocks 0>; > + assigned-clocks = <&display_clocks 6>; You can use the header file macros now. > + assigned-clock-rates = <150000000>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + mixer0_out: port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + mixer0_out_tcon0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&tcon0_in_mixer0>; > + }; > + }; > + }; > + }; > + > syscon: syscon@1c00000 { > compatible = "allwinner,sun8i-a83t-system-controller", > "syscon"; > @@ -177,6 +223,40 @@ > #dma-cells = <1>; > }; > > + tcon0: lcd-controller@1c0c000 { > + compatible = "allwinner,sun8i-a83t-tcon"; > + reg = <0x01c0c000 0x1000>; > + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; > + clock-names = "ahb", "tcon-ch0"; So I spotted that LVDS can use either TCON0 or MIPI-PLL as its clock parent. See register TCON0_LVDS_IF_REG @ 0x084. Any chance this makes it into the binding and device trees? > + clock-output-names = "tcon-pixel-clock"; > + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; > + reset-names = "lcd", "lvds"; > + status = "disabled"; Any reason not to have this enabled by default? ChenYu > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + tcon0_in: port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + tcon0_in_mixer0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mixer0_out_tcon0>; > + }; > + }; > + > + tcon0_out: port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + }; > + }; > + > mmc0: mmc@1c0f000 { > compatible = "allwinner,sun8i-a83t-mmc", > "allwinner,sun7i-a20-mmc"; > -- > git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index ce6e887c8938..57feeb6fee8b 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -151,6 +151,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-a83t-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + memory { reg = <0x40000000 0x80000000>; device_type = "memory"; @@ -162,6 +168,46 @@ #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-a83t-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_PLL_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-a83t-de2-mixer"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks 0>, + <&display_clocks 6>; + clock-names = "bus", + "mod"; + resets = <&display_clocks 0>; + assigned-clocks = <&display_clocks 6>; + assigned-clock-rates = <150000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mixer0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + syscon: syscon@1c00000 { compatible = "allwinner,sun8i-a83t-system-controller", "syscon"; @@ -177,6 +223,40 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-a83t-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "ahb", "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; + reset-names = "lcd", "lvds"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-a83t-mmc", "allwinner,sun7i-a20-mmc";
The display pipeline on the A83T is mainly composed of the mixers and TCONs, plus various encoders. Let's add the mixers and TCONs to the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 80 ++++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+)