| Message ID | 1507892203-17033-2-git-send-email-todor.tomov@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
gOn Fri, Oct 13, 2017 at 01:56:40PM +0300, Todor Tomov wrote: > Add DT binding document for Qualcomm Camera Control Interface driver > > CC: Rob Herring <robh+dt@kernel.org> > CC: Mark Rutland <mark.rutland@arm.com> > CC: devicetree@vger.kernel.org > Signed-off-by: Todor Tomov <todor.tomov@linaro.org> > --- > .../devicetree/bindings/i2c/i2c-qcom-cci.txt | 46 ++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt > new file mode 100644 > index 0000000..cb1fe15 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt > @@ -0,0 +1,46 @@ > +Qualcomm Camera Control Interface controller > + > +Required properties: > + - compatible: Should be one of: > + - "qcom,cci-v1.0.8" for 8916; > + - "qcom,cci-v1.4.0" for 8996. Does using version numbers really buy anything over using SoC names? > + - #address-cells: Should be <1>. > + - #size-cells: Should be <0>. > + - reg: Base address of the controller and length of memory mapped region. > + - interrupts: Specifier for CCI interrupt. > + - clocks: List of clock specifiers, one for each entry in clock-names. > + - clock-names: Should contain: > + - "mmss_mmagic_ahb" - on 8996 only; > + - "camss_top_ahb"; > + - "cci_ahb"; > + - "cci"; > + - "camss_ahb". > + > +Required properties on 8996: > + - power-domains: Power domain specifier. > + > +Optional: > + - clock-frequency: Desired I2C bus clock frequency in Hz, defaults to 100 kHz > + if omitted. I2C freq? The block has an I2C controller? If so, you should explicitly state that somewhere in here and show a sensor as a child node. > + > +Example: > + > + cci@a0c000 { > + compatible = "qcom,cci-v1.4.0"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xa0c000 0x1000>; > + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; > + power-domains = <&mmcc CAMSS_GDSC>; > + clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>, > + <&mmcc CAMSS_TOP_AHB_CLK>, > + <&mmcc CAMSS_CCI_AHB_CLK>, > + <&mmcc CAMSS_CCI_CLK>, > + <&mmcc CAMSS_AHB_CLK>; > + clock-names = "mmss_mmagic_ahb", > + "camss_top_ahb", > + "cci_ahb", > + "cci", > + "camss_ahb"; > + clock-frequency = <400000>; > + }; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt new file mode 100644 index 0000000..cb1fe15 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt @@ -0,0 +1,46 @@ +Qualcomm Camera Control Interface controller + +Required properties: + - compatible: Should be one of: + - "qcom,cci-v1.0.8" for 8916; + - "qcom,cci-v1.4.0" for 8996. + - #address-cells: Should be <1>. + - #size-cells: Should be <0>. + - reg: Base address of the controller and length of memory mapped region. + - interrupts: Specifier for CCI interrupt. + - clocks: List of clock specifiers, one for each entry in clock-names. + - clock-names: Should contain: + - "mmss_mmagic_ahb" - on 8996 only; + - "camss_top_ahb"; + - "cci_ahb"; + - "cci"; + - "camss_ahb". + +Required properties on 8996: + - power-domains: Power domain specifier. + +Optional: + - clock-frequency: Desired I2C bus clock frequency in Hz, defaults to 100 kHz + if omitted. + +Example: + + cci@a0c000 { + compatible = "qcom,cci-v1.4.0"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xa0c000 0x1000>; + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; + power-domains = <&mmcc CAMSS_GDSC>; + clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "mmss_mmagic_ahb", + "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + clock-frequency = <400000>; + };
Add DT binding document for Qualcomm Camera Control Interface driver CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Todor Tomov <todor.tomov@linaro.org> --- .../devicetree/bindings/i2c/i2c-qcom-cci.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt