Message ID | 1508349961-15051-1-git-send-email-pali.rohar@gmail.com (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Darren Hart |
Headers | show |
On Wed, Oct 18, 2017 at 9:06 PM, Pali Rohár <pali.rohar@gmail.com> wrote: > This machine reports number of keyboard backlight led levels, instead of > value of the last led level index. Therefore max_brightness properly needs > to be subtracted by 1 to match led max_brightness API. > > Signed-off-by: Pali Rohár <pali.rohar@gmail.com> > Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 > + u8 kbd_led_num_of_levels_instead_of_last_index; Sorry for last minute review comments. First of all, can it be just boolean? Naming... Yes, too hard as always was, is and will be. What about just kbd_led_use_levels? Also, does it make sense to create a quirks as an unsigned long and put there corresponding bits with definitions? /* Comment what is this for */ #define QUIRK_KBD_LED_USE_LEVELS 0 unsigned long quirks; ? > + if (quirks && quirks->kbd_led_num_of_levels_instead_of_last_index && info->levels) > + info->levels--; With last suggestion if becomes something like if (quirks & BIT(QUIRK_KBD_LED_USE_LEVELS) && info->levels)
On Wednesday 18 October 2017 22:09:41 Andy Shevchenko wrote: > On Wed, Oct 18, 2017 at 9:06 PM, Pali Rohár <pali.rohar@gmail.com> wrote: > > This machine reports number of keyboard backlight led levels, instead of > > value of the last led level index. Therefore max_brightness properly needs > > to be subtracted by 1 to match led max_brightness API. > > > > Signed-off-by: Pali Rohár <pali.rohar@gmail.com> > > Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com> > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 > > > + u8 kbd_led_num_of_levels_instead_of_last_index; > > Sorry for last minute review comments. > > First of all, can it be just boolean? Yes, touchpad_led and needs_kbd_timeouts are booleans too. > Naming... Yes, too hard as always was, is and will be. > > What about just > > kbd_led_use_levels? If you code: if (quirks->kbd_led_use_levels) info->levels--; Then I think it does not help reader what that quirk represent. > Also, does it make sense to create a quirks as an unsigned long and > put there corresponding bits with definitions? Problem is that part of quirk structure is variable length array kbd_timeouts. So one unsigned long does not help. > /* Comment what is this for */ > #define QUIRK_KBD_LED_USE_LEVELS 0 > > unsigned long quirks; > > ? > > > + if (quirks && quirks->kbd_led_num_of_levels_instead_of_last_index && info->levels) > > + info->levels--; > > With last suggestion if becomes something like > > if (quirks & BIT(QUIRK_KBD_LED_USE_LEVELS) && info->levels) > >
On Wed, Oct 18, 2017 at 08:06:01PM +0200, Pali Rohár wrote: > This machine reports number of keyboard backlight led levels, instead of > value of the last led level index. Therefore max_brightness properly needs > to be subtracted by 1 to match led max_brightness API. > > Signed-off-by: Pali Rohár <pali.rohar@gmail.com> > Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 > --- > Changes since v1: > * Update kbd_info.levels at initialization time based on quirk This looks much cleaner IMO, thanks. > --- > drivers/platform/x86/dell-laptop.c | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c > index f42159f..3f9be8a 100644 > --- a/drivers/platform/x86/dell-laptop.c > +++ b/drivers/platform/x86/dell-laptop.c > @@ -49,6 +49,7 @@ > > struct quirk_entry { > u8 touchpad_led; > + u8 kbd_led_num_of_levels_instead_of_last_index; OK, I forgot to comment on this one :-) A name should be descriptive, but that's just too much. So let's use something shorter, and add a comment if one is really needed to explain what it is. Something like: u8 kbd_led_reports_num_levels is shorter, but still awfully long. u8 kbd_led_num_levels is shorter, but obviously looks like it should be the levels value instead of a bool. So the above is probably best. > > int needs_kbd_timeouts; > /* > @@ -79,6 +80,10 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) > .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 }, > }; > > +static struct quirk_entry quirk_dell_latitude_e6410 = { > + .kbd_led_num_of_levels_instead_of_last_index = 1, > +}; > + > static struct platform_driver platform_driver = { > .driver = { > .name = "dell-laptop", > @@ -280,6 +285,15 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) > }, > .driver_data = &quirk_dell_xps13_9333, > }, > + { > + .callback = dmi_matched, > + .ident = "Dell Latitude E6410", > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), > + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6410"), > + }, > + .driver_data = &quirk_dell_latitude_e6410, > + }, > { } > }; > > @@ -1200,6 +1214,9 @@ static int kbd_get_info(struct kbd_info *info) > units = (buffer->output[2] >> 8) & 0xFF; > info->levels = (buffer->output[2] >> 16) & 0xFF; > > + if (quirks && quirks->kbd_led_num_of_levels_instead_of_last_index && info->levels) > + info->levels--; > + > if (units & BIT(0)) > info->seconds = (buffer->output[3] >> 0) & 0xFF; > if (units & BIT(1)) > -- > 1.7.9.5 > >
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index f42159f..3f9be8a 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -49,6 +49,7 @@ struct quirk_entry { u8 touchpad_led; + u8 kbd_led_num_of_levels_instead_of_last_index; int needs_kbd_timeouts; /* @@ -79,6 +80,10 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) .kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 }, }; +static struct quirk_entry quirk_dell_latitude_e6410 = { + .kbd_led_num_of_levels_instead_of_last_index = 1, +}; + static struct platform_driver platform_driver = { .driver = { .name = "dell-laptop", @@ -280,6 +285,15 @@ static int __init dmi_matched(const struct dmi_system_id *dmi) }, .driver_data = &quirk_dell_xps13_9333, }, + { + .callback = dmi_matched, + .ident = "Dell Latitude E6410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6410"), + }, + .driver_data = &quirk_dell_latitude_e6410, + }, { } }; @@ -1200,6 +1214,9 @@ static int kbd_get_info(struct kbd_info *info) units = (buffer->output[2] >> 8) & 0xFF; info->levels = (buffer->output[2] >> 16) & 0xFF; + if (quirks && quirks->kbd_led_num_of_levels_instead_of_last_index && info->levels) + info->levels--; + if (units & BIT(0)) info->seconds = (buffer->output[3] >> 0) & 0xFF; if (units & BIT(1))
This machine reports number of keyboard backlight led levels, instead of value of the last led level index. Therefore max_brightness properly needs to be subtracted by 1 to match led max_brightness API. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reported-by: Gabriel M. Elder <gabriel@tekgnowsys.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=196913 --- Changes since v1: * Update kbd_info.levels at initialization time based on quirk --- drivers/platform/x86/dell-laptop.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)