| Message ID | 1310303679-17936-2-git-send-email-ido@wizery.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Ido, On Sun, Jul 10, 2011 at 18:44:34, Ido Yariv wrote: > Commit 7416401 ("arm: davinci: Fix fallout from generic irq chip > conversion") introduced a bug, causing low level interrupt handlers to > get a bogus irq number as an argument. The gpio irq handler falsely > assumes that the handler data is the irq base number and that is no > longer true. > > Fix this by converting gpio_irq_handler's bank_irq argument to the > corresponding irq base number. > > Signed-off-by: Ido Yariv <ido@wizery.com> > CC: Thomas Gleixner <tglx@linutronix.de> > --- > arch/arm/mach-davinci/gpio.c | 32 ++++++++++++++++++++++++++++---- > 1 files changed, 28 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c > index e722139..ff43e2a 100644 > --- a/arch/arm/mach-davinci/gpio.c > +++ b/arch/arm/mach-davinci/gpio.c > @@ -249,16 +249,40 @@ static struct irq_chip gpio_irqchip = { > .flags = IRQCHIP_SET_TYPE_MASKED, > }; > > +static inline int bankirq_to_irqbase(unsigned int bank_irq) > +{ > + int gpio; > + int index; > + > + /* Each irq bank consists of up to 16 irqs */ > + gpio = 16 * (bank_irq - davinci_soc_info.gpio_irq); > + > + /* Each controller controls 32 GPIOs */ > + index = gpio / 32; > + > + if (unlikely(!davinci_soc_info.gpio_ctlrs)) > + return -EINVAL; > + > + if (unlikely(index >= davinci_soc_info.gpio_ctlrs_num)) > + return -EINVAL; > + > + return davinci_soc_info.gpio_ctlrs[index].irq_base; > +} > + > static void > -gpio_irq_handler(unsigned irq, struct irq_desc *desc) > +gpio_irq_handler(unsigned bank_irq, struct irq_desc *desc) > { > struct davinci_gpio_regs __iomem *g; > u32 mask = 0xffff; > + int irqbase = bankirq_to_irqbase(bank_irq); > + > + if (unlikely(irqbase < 0)) > + return; > > g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); > > /* we only care about one bank */ > - if (irq & 1) > + if (bank_irq & 1) > mask <<= 16; > > /* temporarily mask (level sensitive) parent IRQ */ > @@ -274,11 +298,11 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) > if (!status) > break; > __raw_writel(status, &g->intstat); > - if (irq & 1) > + if (bank_irq & 1) > status >>= 16; > > /* now demux them to the right lowlevel handler */ > - n = (int)irq_get_handler_data(irq); > + n = irqbase; > while (status) { > res = ffs(status); > n += res; Thanks for the bug fix. How about setting the handler data for bank IRQ in davinci_gpio_irq_setup() to &chips[bank]? chips[bank].regs should give you the register base address (g) and chips[bank].irq_base should give you 'n'. Also please drop the rename of irq to bank_irq as it is not central to the bug fix. If you spin in soon enough, we may make it to v3.0 Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sekhar, On Mon, Jul 11, 2011 at 05:28:44PM +0530, Nori, Sekhar wrote: > Thanks for the bug fix. > > How about setting the handler data for bank IRQ in > davinci_gpio_irq_setup() to &chips[bank]? > > chips[bank].regs should give you the register base address > (g) and chips[bank].irq_base should give you 'n'. > > Also please drop the rename of irq to bank_irq as it is not > central to the bug fix. > > If you spin in soon enough, we may make it to v3.0 Sure, I'll send a v3 in a few. Thanks for the review, Ido. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index e722139..ff43e2a 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -249,16 +249,40 @@ static struct irq_chip gpio_irqchip = { .flags = IRQCHIP_SET_TYPE_MASKED, }; +static inline int bankirq_to_irqbase(unsigned int bank_irq) +{ + int gpio; + int index; + + /* Each irq bank consists of up to 16 irqs */ + gpio = 16 * (bank_irq - davinci_soc_info.gpio_irq); + + /* Each controller controls 32 GPIOs */ + index = gpio / 32; + + if (unlikely(!davinci_soc_info.gpio_ctlrs)) + return -EINVAL; + + if (unlikely(index >= davinci_soc_info.gpio_ctlrs_num)) + return -EINVAL; + + return davinci_soc_info.gpio_ctlrs[index].irq_base; +} + static void -gpio_irq_handler(unsigned irq, struct irq_desc *desc) +gpio_irq_handler(unsigned bank_irq, struct irq_desc *desc) { struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + int irqbase = bankirq_to_irqbase(bank_irq); + + if (unlikely(irqbase < 0)) + return; g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); /* we only care about one bank */ - if (irq & 1) + if (bank_irq & 1) mask <<= 16; /* temporarily mask (level sensitive) parent IRQ */ @@ -274,11 +298,11 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) + if (bank_irq & 1) status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = irqbase; while (status) { res = ffs(status); n += res;
Commit 7416401 ("arm: davinci: Fix fallout from generic irq chip conversion") introduced a bug, causing low level interrupt handlers to get a bogus irq number as an argument. The gpio irq handler falsely assumes that the handler data is the irq base number and that is no longer true. Fix this by converting gpio_irq_handler's bank_irq argument to the corresponding irq base number. Signed-off-by: Ido Yariv <ido@wizery.com> CC: Thomas Gleixner <tglx@linutronix.de> --- arch/arm/mach-davinci/gpio.c | 32 ++++++++++++++++++++++++++++---- 1 files changed, 28 insertions(+), 4 deletions(-)