| Message ID | 6e313d0b31dca3f47583668eb755d934a1ab515e.1508231063.git-series.maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, Oct 17, 2017 at 5:06 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The TCON supports the LVDS interface to output to a panel or a bridge. > Let's add support for it. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > drivers/gpu/drm/sun4i/Makefile | 1 +- > drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++- > 5 files changed, 419 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h > > diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile > index cfba2c07519c..6fee15d016ef 100644 > --- a/drivers/gpu/drm/sun4i/Makefile > +++ b/drivers/gpu/drm/sun4i/Makefile > @@ -10,6 +10,7 @@ sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o > > sun4i-tcon-y += sun4i_tcon.o > sun4i-tcon-y += sun4i_rgb.o > +sun4i-tcon-y += sun4i_lvds.o > sun4i-tcon-y += sun4i_dotclock.o > sun4i-tcon-y += sun4i_crtc.o > > diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c > new file mode 100644 > index 000000000000..635a3f505ecb > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c > @@ -0,0 +1,183 @@ > +/* > + * Copyright (C) 2015 NextThing Co > + * Copyright (C) 2015-2017 Free Electrons > + * > + * Maxime Ripard <maxime.ripard@free-electrons.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <linux/clk.h> > + > +#include <drm/drmP.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_of.h> > +#include <drm/drm_panel.h> > + > +#include "sun4i_crtc.h" > +#include "sun4i_tcon.h" > +#include "sun4i_lvds.h" > + > +struct sun4i_lvds { > + struct drm_connector connector; > + struct drm_encoder encoder; > + > + struct sun4i_tcon *tcon; > +}; > + > +static inline struct sun4i_lvds * > +drm_connector_to_sun4i_lvds(struct drm_connector *connector) > +{ > + return container_of(connector, struct sun4i_lvds, > + connector); > +} > + > +static inline struct sun4i_lvds * > +drm_encoder_to_sun4i_lvds(struct drm_encoder *encoder) > +{ > + return container_of(encoder, struct sun4i_lvds, > + encoder); > +} > + > +static int sun4i_lvds_get_modes(struct drm_connector *connector) > +{ > + struct sun4i_lvds *lvds = > + drm_connector_to_sun4i_lvds(connector); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + return drm_panel_get_modes(tcon->panel); > +} > + > +static struct drm_connector_helper_funcs sun4i_lvds_con_helper_funcs = { > + .get_modes = sun4i_lvds_get_modes, > +}; > + > +static void > +sun4i_lvds_connector_destroy(struct drm_connector *connector) > +{ > + struct sun4i_lvds *lvds = drm_connector_to_sun4i_lvds(connector); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + drm_panel_detach(tcon->panel); > + drm_connector_cleanup(connector); > +} > + > +static const struct drm_connector_funcs sun4i_lvds_con_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = sun4i_lvds_connector_destroy, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder) > +{ > + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + DRM_DEBUG_DRIVER("Enabling LVDS output\n"); > + > + if (!IS_ERR(tcon->panel)) { > + drm_panel_prepare(tcon->panel); > + drm_panel_enable(tcon->panel); > + } > +} > + > +static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder) > +{ > + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + DRM_DEBUG_DRIVER("Disabling LVDS output\n"); > + > + if (!IS_ERR(tcon->panel)) { > + drm_panel_disable(tcon->panel); > + drm_panel_unprepare(tcon->panel); > + } > +} > + > +static const struct drm_encoder_helper_funcs sun4i_lvds_enc_helper_funcs = { > + .disable = sun4i_lvds_encoder_disable, > + .enable = sun4i_lvds_encoder_enable, > +}; > + > +static const struct drm_encoder_funcs sun4i_lvds_enc_funcs = { > + .destroy = drm_encoder_cleanup, > +}; > + > +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon) > +{ > + struct drm_encoder *encoder; > + struct drm_bridge *bridge; > + struct sun4i_lvds *lvds; > + int ret; > + > + lvds = devm_kzalloc(drm->dev, sizeof(*lvds), GFP_KERNEL); > + if (!lvds) > + return -ENOMEM; > + lvds->tcon = tcon; > + encoder = &lvds->encoder; > + > + ret = drm_of_find_panel_or_bridge(tcon->dev->of_node, 1, 0, > + &tcon->panel, &bridge); > + if (ret) { > + dev_info(drm->dev, "No panel or bridge found... LVDS output disabled\n"); > + return 0; > + } > + > + drm_encoder_helper_add(&lvds->encoder, > + &sun4i_lvds_enc_helper_funcs); > + ret = drm_encoder_init(drm, > + &lvds->encoder, > + &sun4i_lvds_enc_funcs, > + DRM_MODE_ENCODER_LVDS, > + NULL); > + if (ret) { > + dev_err(drm->dev, "Couldn't initialise the lvds encoder\n"); > + goto err_out; > + } > + > + /* The LVDS encoder can only work with the TCON channel 0 */ > + lvds->encoder.possible_crtcs = BIT(drm_crtc_index(&tcon->crtc->crtc)); > + > + if (tcon->panel) { > + drm_connector_helper_add(&lvds->connector, > + &sun4i_lvds_con_helper_funcs); > + ret = drm_connector_init(drm, &lvds->connector, > + &sun4i_lvds_con_funcs, > + DRM_MODE_CONNECTOR_LVDS); > + if (ret) { > + dev_err(drm->dev, "Couldn't initialise the lvds connector\n"); > + goto err_cleanup_connector; > + } > + > + drm_mode_connector_attach_encoder(&lvds->connector, > + &lvds->encoder); > + > + ret = drm_panel_attach(tcon->panel, &lvds->connector); > + if (ret) { > + dev_err(drm->dev, "Couldn't attach our panel\n"); > + goto err_cleanup_connector; > + } > + } > + > + if (bridge) { > + ret = drm_bridge_attach(encoder, bridge, NULL); > + if (ret) { > + dev_err(drm->dev, "Couldn't attach our bridge\n"); > + goto err_cleanup_connector; > + } > + } > + > + return 0; > + > +err_cleanup_connector: > + drm_encoder_cleanup(&lvds->encoder); > +err_out: > + return ret; > +} > +EXPORT_SYMBOL(sun4i_lvds_init); > diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.h b/drivers/gpu/drm/sun4i/sun4i_lvds.h > new file mode 100644 > index 000000000000..1b8fad4b82c3 > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.h > @@ -0,0 +1,18 @@ > +/* > + * Copyright (C) 2015 NextThing Co > + * Copyright (C) 2015-2017 Free Electrons > + * > + * Maxime Ripard <maxime.ripard@free-electrons.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#ifndef _SUN4I_LVDS_H_ > +#define _SUN4I_LVDS_H_ > + > +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon); > + > +#endif /* _SUN4I_LVDS_H_ */ > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 3efa1ab045cd..6a20a467ee6d 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -31,10 +31,52 @@ > #include "sun4i_crtc.h" > #include "sun4i_dotclock.h" > #include "sun4i_drv.h" > +#include "sun4i_lvds.h" > #include "sun4i_rgb.h" > #include "sun4i_tcon.h" > #include "sunxi_engine.h" > > +static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder) > +{ > + struct drm_connector *connector; > + struct drm_connector_list_iter iter; > + > + drm_connector_list_iter_begin(encoder->dev, &iter); > + drm_for_each_connector_iter(connector, &iter) > + if (connector->encoder == encoder) { > + drm_connector_list_iter_end(&iter); > + return connector; > + } > + drm_connector_list_iter_end(&iter); > + > + return NULL; > +} > + > +static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder) > +{ > + struct drm_connector *connector; > + struct drm_display_info *info; > + > + connector = sun4i_tcon_get_connector(encoder); > + if (!connector) > + return -EINVAL; > + > + info = &connector->display_info; > + if (info->num_bus_formats != 1) > + return -EINVAL; > + > + switch (info->bus_formats[0]) { > + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: > + return 18; > + > + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: > + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: > + return 24; > + } > + > + return -EINVAL; > +} > + > static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, > bool enabled) > { > @@ -69,9 +111,13 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > const struct drm_encoder *encoder, > bool enabled) > { > + bool is_lvds = false; > int channel; > > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + is_lvds = true; > + /* Fallthrough */ > case DRM_MODE_ENCODER_NONE: > channel = 0; > break; > @@ -84,10 +130,47 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > return; > } > > + if (is_lvds && !enabled) > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, 0); > + > regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > SUN4I_TCON_GCTL_TCON_ENABLE, > enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0); > > + if (is_lvds && enabled) { > + u8 val; > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, > + SUN4I_TCON0_LVDS_IF_EN); > + > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_C(2) | > + SUN4I_TCON0_LVDS_ANA0_V(3) | > + SUN4I_TCON0_LVDS_ANA0_PD(2) | > + SUN4I_TCON0_LVDS_ANA0_EN_LDO); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_MB, > + SUN4I_TCON0_LVDS_ANA0_EN_MB); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC); > + > + if (sun4i_tcon_get_pixel_depth(encoder) == 18) > + val = 7; > + else > + val = 0xf; > + > + regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(0xf), > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(val)); > + } > + I suggest moving the LVDS bits into a separate helper (or two) to be called from sun4i_tcon_set_status(). > sun4i_tcon_channel_set_status(tcon, channel, enabled); > } > > @@ -170,6 +253,78 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay)); > } > > +static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, > + const struct drm_encoder *encoder, > + const struct drm_display_mode *mode) > +{ > + unsigned int bp; > + u8 clk_delay; > + u32 reg, val = 0; > + > + tcon->dclk_min_div = 7; > + tcon->dclk_max_div = 7; > + sun4i_tcon0_mode_set_common(tcon, mode); > + > + /* Adjust clock delay */ > + clk_delay = sun4i_tcon_get_clk_delay(mode, 0); > + regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, > + SUN4I_TCON0_CTL_CLK_DELAY_MASK, > + SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_htotal - mode->crtc_hsync_start; > + DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", > + mode->crtc_htotal, bp); > + > + /* Set horizontal display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, > + SUN4I_TCON0_BASIC1_H_TOTAL(0x554) | > + SUN4I_TCON0_BASIC1_H_BACKPORCH(0xa0)); Fixed, magic numbers? > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_vtotal - mode->crtc_vsync_start; > + DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", > + mode->crtc_vtotal, bp); > + > + /* Set vertical display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, > + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | > + SUN4I_TCON0_BASIC2_V_BACKPORCH(0x17)); Same here. Are these left over from testing? And the h/v sync stuff looks the same as for RGB. Can we move this to the common function? Or does MIPI use something different? > + > + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | > + SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | > + SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; > + if (sun4i_tcon_get_pixel_depth(encoder) == 24) > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; > + else > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS; > + > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg); > + > + /* Setup the polarity of the various signals */ > + if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) > + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; > + > + if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) > + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; > + > + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, 0); > + > + /* Map output pins to channel 0 */ > + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > + SUN4I_TCON_GCTL_IOMAP_MASK, > + SUN4I_TCON_GCTL_IOMAP_TCON0); > + > + /* Enable the output on the pins */ > + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); Output pin settings look the same as well. Same question as above. > +} > + > static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > @@ -336,6 +491,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); > + break; > case DRM_MODE_ENCODER_NONE: > sun4i_tcon0_mode_set_rgb(tcon, mode); > sun4i_tcon_set_mux(tcon, 0, encoder); > @@ -667,7 +825,9 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > struct drm_device *drm = data; > struct sun4i_drv *drv = drm->dev_private; > struct sunxi_engine *engine; > + struct device_node *remote; > struct sun4i_tcon *tcon; > + bool has_lvds; > int ret; > > engine = sun4i_tcon_find_engine(drv, dev->of_node); > @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > return ret; > } > > + /* > + * This can only be made optional since we've had DT nodes > + * without the LVDS reset properties. > + * > + * If the property is missing, just disable LVDS, and print a > + * warning. > + */ > + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); > + if (IS_ERR(tcon->lvds_rst)) { > + dev_err(dev, "Couldn't get our reset line\n"); > + return PTR_ERR(tcon->lvds_rst); > + } else if (tcon->lvds_rst) { > + has_lvds = true; > + reset_control_reset(tcon->lvds_rst); > + } else { > + has_lvds = false; > + dev_warn(dev, > + "Missing LVDS reset property, you should consider upgrading your DT\n"); > + } > + > ret = sun4i_tcon_init_clocks(dev, tcon); > if (ret) { > dev_err(dev, "Couldn't init our TCON clocks\n"); > @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > goto err_free_clocks; > } > > - ret = sun4i_rgb_init(drm, tcon); > + /* > + * If we have an LVDS panel connected to the TCON, we should > + * just probe the LVDS connector. Otherwise, just probe RGB as > + * we used to. > + */ > + remote = of_graph_get_remote_node(dev->of_node, 1, 0); > + if (has_lvds && of_device_is_compatible(remote, "panel-lvds")) Is the compatible guaranteed? What about bridges? Thanks ChenYu > + ret = sun4i_lvds_init(drm, tcon); > + else > + ret = sun4i_rgb_init(drm, tcon); > + of_node_put(remote); > + > if (ret < 0) > goto err_free_clocks; > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h > index 4141fbd97ddf..382689e5396e 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h > @@ -70,7 +70,21 @@ > #define SUN4I_TCON0_TTL2_REG 0x78 > #define SUN4I_TCON0_TTL3_REG 0x7c > #define SUN4I_TCON0_TTL4_REG 0x80 > + > #define SUN4I_TCON0_LVDS_IF_REG 0x84 > +#define SUN4I_TCON0_LVDS_IF_EN BIT(31) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_MASK BIT(26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS (1 << 26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS (0 << 26) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_MASK BIT(20) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 (1 << 20) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_MASK BIT(4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL (1 << 4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_INV (0 << 4) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_MASK GENMASK(3, 0) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL (0xf) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_INV (0) > + > #define SUN4I_TCON0_IO_POL_REG 0x88 > #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) > #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) > @@ -131,6 +145,16 @@ > #define SUN4I_TCON_CEU_RANGE_G_REG 0x144 > #define SUN4I_TCON_CEU_RANGE_B_REG 0x148 > #define SUN4I_TCON_MUX_CTRL_REG 0x200 > + > +#define SUN4I_TCON0_LVDS_ANA0_REG 0x220 > +#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31) > +#define SUN4I_TCON0_LVDS_ANA0_EN_LDO BIT(30) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVC BIT(24) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVD(x) (((x) & 0xf) << 20) > +#define SUN4I_TCON0_LVDS_ANA0_C(x) (((x) & 3) << 17) > +#define SUN4I_TCON0_LVDS_ANA0_V(x) (((x) & 3) << 8) > +#define SUN4I_TCON0_LVDS_ANA0_PD(x) (((x) & 3) << 4) > + > #define SUN4I_TCON1_FILL_CTL_REG 0x300 > #define SUN4I_TCON1_FILL_BEG0_REG 0x304 > #define SUN4I_TCON1_FILL_END0_REG 0x308 > @@ -174,6 +198,7 @@ struct sun4i_tcon { > > /* Reset control */ > struct reset_control *lcd_rst; > + struct reset_control *lvds_rst; > > struct drm_panel *panel; > > -- > git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 17, 2017 at 11:06:22AM +0200, Maxime Ripard wrote: > The TCON supports the LVDS interface to output to a panel or a bridge. > Let's add support for it. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > drivers/gpu/drm/sun4i/Makefile | 1 +- > drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++- > 5 files changed, 419 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h > [...] > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 3efa1ab045cd..6a20a467ee6d 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c [...] > @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > return ret; > } > > + /* > + * This can only be made optional since we've had DT nodes > + * without the LVDS reset properties. > + * > + * If the property is missing, just disable LVDS, and print a > + * warning. > + */ > + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); > + if (IS_ERR(tcon->lvds_rst)) { > + dev_err(dev, "Couldn't get our reset line\n"); > + return PTR_ERR(tcon->lvds_rst); > + } else if (tcon->lvds_rst) { > + has_lvds = true; > + reset_control_reset(tcon->lvds_rst); > + } else { > + has_lvds = false; > + dev_warn(dev, > + "Missing LVDS reset property, you should consider upgrading your DT\n"); This will generate annoying warning for tcon1 on A10/A20. > + } > + > ret = sun4i_tcon_init_clocks(dev, tcon); > if (ret) { > dev_err(dev, "Couldn't init our TCON clocks\n"); > @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > goto err_free_clocks; > } > > - ret = sun4i_rgb_init(drm, tcon); > + /* > + * If we have an LVDS panel connected to the TCON, we should > + * just probe the LVDS connector. Otherwise, just probe RGB as > + * we used to. > + */ -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Maxime, On 17 October 2017 at 20:06, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > The TCON supports the LVDS interface to output to a panel or a bridge. > Let's add support for it. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > drivers/gpu/drm/sun4i/Makefile | 1 +- > drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++- > 5 files changed, 419 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h > > diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile > index cfba2c07519c..6fee15d016ef 100644 > --- a/drivers/gpu/drm/sun4i/Makefile > +++ b/drivers/gpu/drm/sun4i/Makefile > @@ -10,6 +10,7 @@ sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o > > sun4i-tcon-y += sun4i_tcon.o > sun4i-tcon-y += sun4i_rgb.o > +sun4i-tcon-y += sun4i_lvds.o > sun4i-tcon-y += sun4i_dotclock.o > sun4i-tcon-y += sun4i_crtc.o > > diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c > new file mode 100644 > index 000000000000..635a3f505ecb > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c > @@ -0,0 +1,183 @@ > +/* > + * Copyright (C) 2015 NextThing Co > + * Copyright (C) 2015-2017 Free Electrons > + * > + * Maxime Ripard <maxime.ripard@free-electrons.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <linux/clk.h> > + > +#include <drm/drmP.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_of.h> > +#include <drm/drm_panel.h> > + > +#include "sun4i_crtc.h" > +#include "sun4i_tcon.h" > +#include "sun4i_lvds.h" > + > +struct sun4i_lvds { > + struct drm_connector connector; > + struct drm_encoder encoder; > + > + struct sun4i_tcon *tcon; > +}; > + > +static inline struct sun4i_lvds * > +drm_connector_to_sun4i_lvds(struct drm_connector *connector) > +{ > + return container_of(connector, struct sun4i_lvds, > + connector); > +} > + > +static inline struct sun4i_lvds * > +drm_encoder_to_sun4i_lvds(struct drm_encoder *encoder) > +{ > + return container_of(encoder, struct sun4i_lvds, > + encoder); > +} > + > +static int sun4i_lvds_get_modes(struct drm_connector *connector) > +{ > + struct sun4i_lvds *lvds = > + drm_connector_to_sun4i_lvds(connector); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + return drm_panel_get_modes(tcon->panel); > +} > + > +static struct drm_connector_helper_funcs sun4i_lvds_con_helper_funcs = { > + .get_modes = sun4i_lvds_get_modes, > +}; > + > +static void > +sun4i_lvds_connector_destroy(struct drm_connector *connector) > +{ > + struct sun4i_lvds *lvds = drm_connector_to_sun4i_lvds(connector); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + drm_panel_detach(tcon->panel); > + drm_connector_cleanup(connector); > +} > + > +static const struct drm_connector_funcs sun4i_lvds_con_funcs = { > + .fill_modes = drm_helper_probe_single_connector_modes, > + .destroy = sun4i_lvds_connector_destroy, > + .reset = drm_atomic_helper_connector_reset, > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > +}; > + > +static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder) > +{ > + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + DRM_DEBUG_DRIVER("Enabling LVDS output\n"); > + > + if (!IS_ERR(tcon->panel)) { > + drm_panel_prepare(tcon->panel); > + drm_panel_enable(tcon->panel); > + } > +} > + > +static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder) > +{ > + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); > + struct sun4i_tcon *tcon = lvds->tcon; > + > + DRM_DEBUG_DRIVER("Disabling LVDS output\n"); > + > + if (!IS_ERR(tcon->panel)) { > + drm_panel_disable(tcon->panel); > + drm_panel_unprepare(tcon->panel); > + } > +} > + > +static const struct drm_encoder_helper_funcs sun4i_lvds_enc_helper_funcs = { > + .disable = sun4i_lvds_encoder_disable, > + .enable = sun4i_lvds_encoder_enable, > +}; > + > +static const struct drm_encoder_funcs sun4i_lvds_enc_funcs = { > + .destroy = drm_encoder_cleanup, > +}; > + > +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon) > +{ > + struct drm_encoder *encoder; > + struct drm_bridge *bridge; > + struct sun4i_lvds *lvds; > + int ret; > + > + lvds = devm_kzalloc(drm->dev, sizeof(*lvds), GFP_KERNEL); > + if (!lvds) > + return -ENOMEM; > + lvds->tcon = tcon; > + encoder = &lvds->encoder; > + > + ret = drm_of_find_panel_or_bridge(tcon->dev->of_node, 1, 0, > + &tcon->panel, &bridge); > + if (ret) { > + dev_info(drm->dev, "No panel or bridge found... LVDS output disabled\n"); > + return 0; > + } > + > + drm_encoder_helper_add(&lvds->encoder, > + &sun4i_lvds_enc_helper_funcs); > + ret = drm_encoder_init(drm, > + &lvds->encoder, > + &sun4i_lvds_enc_funcs, > + DRM_MODE_ENCODER_LVDS, > + NULL); > + if (ret) { > + dev_err(drm->dev, "Couldn't initialise the lvds encoder\n"); > + goto err_out; > + } > + > + /* The LVDS encoder can only work with the TCON channel 0 */ > + lvds->encoder.possible_crtcs = BIT(drm_crtc_index(&tcon->crtc->crtc)); > + > + if (tcon->panel) { > + drm_connector_helper_add(&lvds->connector, > + &sun4i_lvds_con_helper_funcs); > + ret = drm_connector_init(drm, &lvds->connector, > + &sun4i_lvds_con_funcs, > + DRM_MODE_CONNECTOR_LVDS); > + if (ret) { > + dev_err(drm->dev, "Couldn't initialise the lvds connector\n"); > + goto err_cleanup_connector; > + } > + > + drm_mode_connector_attach_encoder(&lvds->connector, > + &lvds->encoder); > + > + ret = drm_panel_attach(tcon->panel, &lvds->connector); > + if (ret) { > + dev_err(drm->dev, "Couldn't attach our panel\n"); > + goto err_cleanup_connector; > + } > + } > + > + if (bridge) { > + ret = drm_bridge_attach(encoder, bridge, NULL); > + if (ret) { > + dev_err(drm->dev, "Couldn't attach our bridge\n"); > + goto err_cleanup_connector; > + } > + } > + > + return 0; > + > +err_cleanup_connector: > + drm_encoder_cleanup(&lvds->encoder); > +err_out: > + return ret; > +} > +EXPORT_SYMBOL(sun4i_lvds_init); > diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.h b/drivers/gpu/drm/sun4i/sun4i_lvds.h > new file mode 100644 > index 000000000000..1b8fad4b82c3 > --- /dev/null > +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.h > @@ -0,0 +1,18 @@ > +/* > + * Copyright (C) 2015 NextThing Co > + * Copyright (C) 2015-2017 Free Electrons > + * > + * Maxime Ripard <maxime.ripard@free-electrons.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#ifndef _SUN4I_LVDS_H_ > +#define _SUN4I_LVDS_H_ > + > +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon); > + > +#endif /* _SUN4I_LVDS_H_ */ > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 3efa1ab045cd..6a20a467ee6d 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -31,10 +31,52 @@ > #include "sun4i_crtc.h" > #include "sun4i_dotclock.h" > #include "sun4i_drv.h" > +#include "sun4i_lvds.h" > #include "sun4i_rgb.h" > #include "sun4i_tcon.h" > #include "sunxi_engine.h" > > +static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder) > +{ > + struct drm_connector *connector; > + struct drm_connector_list_iter iter; > + > + drm_connector_list_iter_begin(encoder->dev, &iter); > + drm_for_each_connector_iter(connector, &iter) > + if (connector->encoder == encoder) { > + drm_connector_list_iter_end(&iter); > + return connector; > + } > + drm_connector_list_iter_end(&iter); > + > + return NULL; > +} > + > +static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder) > +{ > + struct drm_connector *connector; > + struct drm_display_info *info; > + > + connector = sun4i_tcon_get_connector(encoder); > + if (!connector) > + return -EINVAL; > + > + info = &connector->display_info; > + if (info->num_bus_formats != 1) > + return -EINVAL; > + > + switch (info->bus_formats[0]) { > + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: > + return 18; > + > + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: > + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: > + return 24; > + } > + > + return -EINVAL; > +} > + > static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, > bool enabled) > { > @@ -69,9 +111,13 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > const struct drm_encoder *encoder, > bool enabled) > { > + bool is_lvds = false; > int channel; > > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + is_lvds = true; > + /* Fallthrough */ > case DRM_MODE_ENCODER_NONE: > channel = 0; > break; > @@ -84,10 +130,47 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > return; > } > > + if (is_lvds && !enabled) > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, 0); > + > regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > SUN4I_TCON_GCTL_TCON_ENABLE, > enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0); > > + if (is_lvds && enabled) { > + u8 val; > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, > + SUN4I_TCON0_LVDS_IF_EN); > + > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_C(2) | > + SUN4I_TCON0_LVDS_ANA0_V(3) | > + SUN4I_TCON0_LVDS_ANA0_PD(2) | > + SUN4I_TCON0_LVDS_ANA0_EN_LDO); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_MB, > + SUN4I_TCON0_LVDS_ANA0_EN_MB); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC); > + > + if (sun4i_tcon_get_pixel_depth(encoder) == 18) > + val = 7; > + else > + val = 0xf; > + > + regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(0xf), > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(val)); > + } > + > sun4i_tcon_channel_set_status(tcon, channel, enabled); > } > > @@ -170,6 +253,78 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay)); > } > > +static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, > + const struct drm_encoder *encoder, > + const struct drm_display_mode *mode) > +{ > + unsigned int bp; > + u8 clk_delay; > + u32 reg, val = 0; > + > + tcon->dclk_min_div = 7; > + tcon->dclk_max_div = 7; > + sun4i_tcon0_mode_set_common(tcon, mode); > + > + /* Adjust clock delay */ > + clk_delay = sun4i_tcon_get_clk_delay(mode, 0); > + regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, > + SUN4I_TCON0_CTL_CLK_DELAY_MASK, > + SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_htotal - mode->crtc_hsync_start; > + DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", > + mode->crtc_htotal, bp); > + > + /* Set horizontal display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, > + SUN4I_TCON0_BASIC1_H_TOTAL(0x554) | > + SUN4I_TCON0_BASIC1_H_BACKPORCH(0xa0)); > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_vtotal - mode->crtc_vsync_start; > + DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", > + mode->crtc_vtotal, bp); > + > + /* Set vertical display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, > + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | > + SUN4I_TCON0_BASIC2_V_BACKPORCH(0x17)); > + > + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | > + SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | > + SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; > + if (sun4i_tcon_get_pixel_depth(encoder) == 24) > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; > + else > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS; > + > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg); > + > + /* Setup the polarity of the various signals */ > + if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) > + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; > + > + if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) > + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; > + > + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, 0); val is set but not written to the SUN4I_TCON0_IO_POL_REG register. > + > + /* Map output pins to channel 0 */ > + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > + SUN4I_TCON_GCTL_IOMAP_MASK, > + SUN4I_TCON_GCTL_IOMAP_TCON0); > + > + /* Enable the output on the pins */ > + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); > +} > + > static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > @@ -336,6 +491,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); > + break; > case DRM_MODE_ENCODER_NONE: > sun4i_tcon0_mode_set_rgb(tcon, mode); > sun4i_tcon_set_mux(tcon, 0, encoder); > @@ -667,7 +825,9 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > struct drm_device *drm = data; > struct sun4i_drv *drv = drm->dev_private; > struct sunxi_engine *engine; > + struct device_node *remote; > struct sun4i_tcon *tcon; > + bool has_lvds; > int ret; > > engine = sun4i_tcon_find_engine(drv, dev->of_node); > @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > return ret; > } > > + /* > + * This can only be made optional since we've had DT nodes > + * without the LVDS reset properties. > + * > + * If the property is missing, just disable LVDS, and print a > + * warning. > + */ > + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); > + if (IS_ERR(tcon->lvds_rst)) { > + dev_err(dev, "Couldn't get our reset line\n"); > + return PTR_ERR(tcon->lvds_rst); > + } else if (tcon->lvds_rst) { > + has_lvds = true; > + reset_control_reset(tcon->lvds_rst); > + } else { > + has_lvds = false; > + dev_warn(dev, > + "Missing LVDS reset property, you should consider upgrading your DT\n"); > + } > + > ret = sun4i_tcon_init_clocks(dev, tcon); > if (ret) { > dev_err(dev, "Couldn't init our TCON clocks\n"); > @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > goto err_free_clocks; > } > > - ret = sun4i_rgb_init(drm, tcon); > + /* > + * If we have an LVDS panel connected to the TCON, we should > + * just probe the LVDS connector. Otherwise, just probe RGB as > + * we used to. > + */ > + remote = of_graph_get_remote_node(dev->of_node, 1, 0); > + if (has_lvds && of_device_is_compatible(remote, "panel-lvds")) > + ret = sun4i_lvds_init(drm, tcon); > + else > + ret = sun4i_rgb_init(drm, tcon); > + of_node_put(remote); > + > if (ret < 0) > goto err_free_clocks; > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h > index 4141fbd97ddf..382689e5396e 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h > @@ -70,7 +70,21 @@ > #define SUN4I_TCON0_TTL2_REG 0x78 > #define SUN4I_TCON0_TTL3_REG 0x7c > #define SUN4I_TCON0_TTL4_REG 0x80 > + > #define SUN4I_TCON0_LVDS_IF_REG 0x84 > +#define SUN4I_TCON0_LVDS_IF_EN BIT(31) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_MASK BIT(26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS (1 << 26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS (0 << 26) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_MASK BIT(20) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 (1 << 20) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_MASK BIT(4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL (1 << 4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_INV (0 << 4) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_MASK GENMASK(3, 0) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL (0xf) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_INV (0) > + > #define SUN4I_TCON0_IO_POL_REG 0x88 > #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) > #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) > @@ -131,6 +145,16 @@ > #define SUN4I_TCON_CEU_RANGE_G_REG 0x144 > #define SUN4I_TCON_CEU_RANGE_B_REG 0x148 > #define SUN4I_TCON_MUX_CTRL_REG 0x200 > + > +#define SUN4I_TCON0_LVDS_ANA0_REG 0x220 > +#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31) > +#define SUN4I_TCON0_LVDS_ANA0_EN_LDO BIT(30) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVC BIT(24) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVD(x) (((x) & 0xf) << 20) > +#define SUN4I_TCON0_LVDS_ANA0_C(x) (((x) & 3) << 17) > +#define SUN4I_TCON0_LVDS_ANA0_V(x) (((x) & 3) << 8) > +#define SUN4I_TCON0_LVDS_ANA0_PD(x) (((x) & 3) << 4) > + > #define SUN4I_TCON1_FILL_CTL_REG 0x300 > #define SUN4I_TCON1_FILL_BEG0_REG 0x304 > #define SUN4I_TCON1_FILL_END0_REG 0x308 > @@ -174,6 +198,7 @@ struct sun4i_tcon { > > /* Reset control */ > struct reset_control *lcd_rst; > + struct reset_control *lvds_rst; > > struct drm_panel *panel; > Regards, Jonathan -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 17, 2017 at 11:06:22AM +0200, Maxime Ripard wrote: > The TCON supports the LVDS interface to output to a panel or a bridge. > Let's add support for it. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > drivers/gpu/drm/sun4i/Makefile | 1 +- > drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++- > drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++- > drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++- > 5 files changed, 419 insertions(+), 1 deletion(-) > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c > create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h > > diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile > index cfba2c07519c..6fee15d016ef 100644 > --- a/drivers/gpu/drm/sun4i/Makefile > +++ b/drivers/gpu/drm/sun4i/Makefile > @@ -10,6 +10,7 @@ sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o > > sun4i-tcon-y += sun4i_tcon.o > sun4i-tcon-y += sun4i_rgb.o > +sun4i-tcon-y += sun4i_lvds.o > sun4i-tcon-y += sun4i_dotclock.o > sun4i-tcon-y += sun4i_crtc.o [...] > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c > index 3efa1ab045cd..6a20a467ee6d 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c > @@ -31,10 +31,52 @@ > #include "sun4i_crtc.h" > #include "sun4i_dotclock.h" > #include "sun4i_drv.h" > +#include "sun4i_lvds.h" > #include "sun4i_rgb.h" > #include "sun4i_tcon.h" > #include "sunxi_engine.h" [...] > static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, > bool enabled) > { > @@ -69,9 +111,13 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > const struct drm_encoder *encoder, > bool enabled) > { > + bool is_lvds = false; > int channel; > > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + is_lvds = true; > + /* Fallthrough */ > case DRM_MODE_ENCODER_NONE: > channel = 0; > break; > @@ -84,10 +130,47 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, > return; > } > > + if (is_lvds && !enabled) > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, 0); > + > regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > SUN4I_TCON_GCTL_TCON_ENABLE, > enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0); > > + if (is_lvds && enabled) { > + u8 val; > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, > + SUN4I_TCON0_LVDS_IF_EN, > + SUN4I_TCON0_LVDS_IF_EN); > + OK, this part below seems to be quite A83T specific, as A10/A20 has different register bits. For example ANA0 bits: A10: #define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(22) But here it is: #define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31) Also, the programming sequence for A10/A20 (from u-boot), and my initial patchset. (I haven't yet had time to get output working on top of your stuff). 1. Set ANA0 (0x220) 2. Set ANA1 3. Update ANA1 regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, SUN4I_TCON0_LVDS_ANA0_CK_EN | SUN4I_TCON0_LVDS_ANA0_REG_V | SUN4I_TCON0_LVDS_ANA0_REG_C | SUN4I_TCON0_LVDS_ANA0_EN_MB | SUN4I_TCON0_LVDS_ANA0_PD | SUN4I_TCON0_LVDS_ANA0_DCHS); udelay(2000); regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG, SUN4I_TCON0_LVDS_ANA1_INIT); udelay(1000); regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG, SUN4I_TCON0_LVDS_ANA1_UPDATE, SUN4I_TCON0_LVDS_ANA1_UPDATE); > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_C(2) | > + SUN4I_TCON0_LVDS_ANA0_V(3) | > + SUN4I_TCON0_LVDS_ANA0_PD(2) | > + SUN4I_TCON0_LVDS_ANA0_EN_LDO); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_MB, > + SUN4I_TCON0_LVDS_ANA0_EN_MB); > + udelay(2); > + > + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVC); > + > + if (sun4i_tcon_get_pixel_depth(encoder) == 18) > + val = 7; > + else > + val = 0xf; > + > + regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(0xf), > + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(val)); > + } > + > sun4i_tcon_channel_set_status(tcon, channel, enabled); > } > > @@ -170,6 +253,78 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, > SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay)); > } > > +static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, > + const struct drm_encoder *encoder, > + const struct drm_display_mode *mode) > +{ > + unsigned int bp; > + u8 clk_delay; > + u32 reg, val = 0; > + > + tcon->dclk_min_div = 7; > + tcon->dclk_max_div = 7; > + sun4i_tcon0_mode_set_common(tcon, mode); > + > + /* Adjust clock delay */ > + clk_delay = sun4i_tcon_get_clk_delay(mode, 0); > + regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, > + SUN4I_TCON0_CTL_CLK_DELAY_MASK, > + SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_htotal - mode->crtc_hsync_start; > + DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", > + mode->crtc_htotal, bp); > + > + /* Set horizontal display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, > + SUN4I_TCON0_BASIC1_H_TOTAL(0x554) | > + SUN4I_TCON0_BASIC1_H_BACKPORCH(0xa0)); > + > + /* > + * This is called a backporch in the register documentation, > + * but it really is the back porch + hsync > + */ > + bp = mode->crtc_vtotal - mode->crtc_vsync_start; > + DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", > + mode->crtc_vtotal, bp); > + > + /* Set vertical display timings */ > + regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, > + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | > + SUN4I_TCON0_BASIC2_V_BACKPORCH(0x17)); > + > + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | > + SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | > + SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; > + if (sun4i_tcon_get_pixel_depth(encoder) == 24) > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; > + else > + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS; > + > + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg); > + > + /* Setup the polarity of the various signals */ > + if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) > + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; > + > + if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) > + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; > + > + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, 0); > + > + /* Map output pins to channel 0 */ > + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, > + SUN4I_TCON_GCTL_IOMAP_MASK, > + SUN4I_TCON_GCTL_IOMAP_TCON0); > + > + /* Enable the output on the pins */ > + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); > +} > + > static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > @@ -336,6 +491,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, > const struct drm_display_mode *mode) > { > switch (encoder->encoder_type) { > + case DRM_MODE_ENCODER_LVDS: > + sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); > + break; > case DRM_MODE_ENCODER_NONE: > sun4i_tcon0_mode_set_rgb(tcon, mode); > sun4i_tcon_set_mux(tcon, 0, encoder); > @@ -667,7 +825,9 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > struct drm_device *drm = data; > struct sun4i_drv *drv = drm->dev_private; > struct sunxi_engine *engine; > + struct device_node *remote; > struct sun4i_tcon *tcon; > + bool has_lvds; > int ret; > > engine = sun4i_tcon_find_engine(drv, dev->of_node); > @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > return ret; > } > > + /* > + * This can only be made optional since we've had DT nodes > + * without the LVDS reset properties. > + * > + * If the property is missing, just disable LVDS, and print a > + * warning. > + */ > + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); > + if (IS_ERR(tcon->lvds_rst)) { > + dev_err(dev, "Couldn't get our reset line\n"); > + return PTR_ERR(tcon->lvds_rst); > + } else if (tcon->lvds_rst) { > + has_lvds = true; > + reset_control_reset(tcon->lvds_rst); > + } else { > + has_lvds = false; > + dev_warn(dev, > + "Missing LVDS reset property, you should consider upgrading your DT\n"); > + } > + > ret = sun4i_tcon_init_clocks(dev, tcon); > if (ret) { > dev_err(dev, "Couldn't init our TCON clocks\n"); > @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, > goto err_free_clocks; > } > > - ret = sun4i_rgb_init(drm, tcon); > + /* > + * If we have an LVDS panel connected to the TCON, we should > + * just probe the LVDS connector. Otherwise, just probe RGB as > + * we used to. > + */ > + remote = of_graph_get_remote_node(dev->of_node, 1, 0); > + if (has_lvds && of_device_is_compatible(remote, "panel-lvds")) > + ret = sun4i_lvds_init(drm, tcon); > + else > + ret = sun4i_rgb_init(drm, tcon); > + of_node_put(remote); > + > if (ret < 0) > goto err_free_clocks; > > diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h > index 4141fbd97ddf..382689e5396e 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h > +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h > @@ -70,7 +70,21 @@ > #define SUN4I_TCON0_TTL2_REG 0x78 > #define SUN4I_TCON0_TTL3_REG 0x7c > #define SUN4I_TCON0_TTL4_REG 0x80 > + > #define SUN4I_TCON0_LVDS_IF_REG 0x84 > +#define SUN4I_TCON0_LVDS_IF_EN BIT(31) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_MASK BIT(26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS (1 << 26) > +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS (0 << 26) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_MASK BIT(20) > +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 (1 << 20) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_MASK BIT(4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL (1 << 4) > +#define SUN4I_TCON0_LVDS_IF_CLK_POL_INV (0 << 4) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_MASK GENMASK(3, 0) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL (0xf) > +#define SUN4I_TCON0_LVDS_IF_DATA_POL_INV (0) > + > #define SUN4I_TCON0_IO_POL_REG 0x88 > #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) > #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) > @@ -131,6 +145,16 @@ > #define SUN4I_TCON_CEU_RANGE_G_REG 0x144 > #define SUN4I_TCON_CEU_RANGE_B_REG 0x148 > #define SUN4I_TCON_MUX_CTRL_REG 0x200 > + > +#define SUN4I_TCON0_LVDS_ANA0_REG 0x220 Although register address is same as A10/A20, its contents seem to be different here... > +#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31) > +#define SUN4I_TCON0_LVDS_ANA0_EN_LDO BIT(30) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVC BIT(24) > +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVD(x) (((x) & 0xf) << 20) > +#define SUN4I_TCON0_LVDS_ANA0_C(x) (((x) & 3) << 17) > +#define SUN4I_TCON0_LVDS_ANA0_V(x) (((x) & 3) << 8) > +#define SUN4I_TCON0_LVDS_ANA0_PD(x) (((x) & 3) << 4) > + > #define SUN4I_TCON1_FILL_CTL_REG 0x300 > #define SUN4I_TCON1_FILL_BEG0_REG 0x304 > #define SUN4I_TCON1_FILL_END0_REG 0x308 > @@ -174,6 +198,7 @@ struct sun4i_tcon { > > /* Reset control */ > struct reset_control *lcd_rst; > + struct reset_control *lvds_rst; > > struct drm_panel *panel; > > -- > git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile index cfba2c07519c..6fee15d016ef 100644 --- a/drivers/gpu/drm/sun4i/Makefile +++ b/drivers/gpu/drm/sun4i/Makefile @@ -10,6 +10,7 @@ sun4i-drm-hdmi-y += sun4i_hdmi_tmds_clk.o sun4i-tcon-y += sun4i_tcon.o sun4i-tcon-y += sun4i_rgb.o +sun4i-tcon-y += sun4i_lvds.o sun4i-tcon-y += sun4i_dotclock.o sun4i-tcon-y += sun4i_crtc.o diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c new file mode 100644 index 000000000000..635a3f505ecb --- /dev/null +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2015 NextThing Co + * Copyright (C) 2015-2017 Free Electrons + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <linux/clk.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> + +#include "sun4i_crtc.h" +#include "sun4i_tcon.h" +#include "sun4i_lvds.h" + +struct sun4i_lvds { + struct drm_connector connector; + struct drm_encoder encoder; + + struct sun4i_tcon *tcon; +}; + +static inline struct sun4i_lvds * +drm_connector_to_sun4i_lvds(struct drm_connector *connector) +{ + return container_of(connector, struct sun4i_lvds, + connector); +} + +static inline struct sun4i_lvds * +drm_encoder_to_sun4i_lvds(struct drm_encoder *encoder) +{ + return container_of(encoder, struct sun4i_lvds, + encoder); +} + +static int sun4i_lvds_get_modes(struct drm_connector *connector) +{ + struct sun4i_lvds *lvds = + drm_connector_to_sun4i_lvds(connector); + struct sun4i_tcon *tcon = lvds->tcon; + + return drm_panel_get_modes(tcon->panel); +} + +static struct drm_connector_helper_funcs sun4i_lvds_con_helper_funcs = { + .get_modes = sun4i_lvds_get_modes, +}; + +static void +sun4i_lvds_connector_destroy(struct drm_connector *connector) +{ + struct sun4i_lvds *lvds = drm_connector_to_sun4i_lvds(connector); + struct sun4i_tcon *tcon = lvds->tcon; + + drm_panel_detach(tcon->panel); + drm_connector_cleanup(connector); +} + +static const struct drm_connector_funcs sun4i_lvds_con_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = sun4i_lvds_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder) +{ + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); + struct sun4i_tcon *tcon = lvds->tcon; + + DRM_DEBUG_DRIVER("Enabling LVDS output\n"); + + if (!IS_ERR(tcon->panel)) { + drm_panel_prepare(tcon->panel); + drm_panel_enable(tcon->panel); + } +} + +static void sun4i_lvds_encoder_disable(struct drm_encoder *encoder) +{ + struct sun4i_lvds *lvds = drm_encoder_to_sun4i_lvds(encoder); + struct sun4i_tcon *tcon = lvds->tcon; + + DRM_DEBUG_DRIVER("Disabling LVDS output\n"); + + if (!IS_ERR(tcon->panel)) { + drm_panel_disable(tcon->panel); + drm_panel_unprepare(tcon->panel); + } +} + +static const struct drm_encoder_helper_funcs sun4i_lvds_enc_helper_funcs = { + .disable = sun4i_lvds_encoder_disable, + .enable = sun4i_lvds_encoder_enable, +}; + +static const struct drm_encoder_funcs sun4i_lvds_enc_funcs = { + .destroy = drm_encoder_cleanup, +}; + +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon) +{ + struct drm_encoder *encoder; + struct drm_bridge *bridge; + struct sun4i_lvds *lvds; + int ret; + + lvds = devm_kzalloc(drm->dev, sizeof(*lvds), GFP_KERNEL); + if (!lvds) + return -ENOMEM; + lvds->tcon = tcon; + encoder = &lvds->encoder; + + ret = drm_of_find_panel_or_bridge(tcon->dev->of_node, 1, 0, + &tcon->panel, &bridge); + if (ret) { + dev_info(drm->dev, "No panel or bridge found... LVDS output disabled\n"); + return 0; + } + + drm_encoder_helper_add(&lvds->encoder, + &sun4i_lvds_enc_helper_funcs); + ret = drm_encoder_init(drm, + &lvds->encoder, + &sun4i_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS, + NULL); + if (ret) { + dev_err(drm->dev, "Couldn't initialise the lvds encoder\n"); + goto err_out; + } + + /* The LVDS encoder can only work with the TCON channel 0 */ + lvds->encoder.possible_crtcs = BIT(drm_crtc_index(&tcon->crtc->crtc)); + + if (tcon->panel) { + drm_connector_helper_add(&lvds->connector, + &sun4i_lvds_con_helper_funcs); + ret = drm_connector_init(drm, &lvds->connector, + &sun4i_lvds_con_funcs, + DRM_MODE_CONNECTOR_LVDS); + if (ret) { + dev_err(drm->dev, "Couldn't initialise the lvds connector\n"); + goto err_cleanup_connector; + } + + drm_mode_connector_attach_encoder(&lvds->connector, + &lvds->encoder); + + ret = drm_panel_attach(tcon->panel, &lvds->connector); + if (ret) { + dev_err(drm->dev, "Couldn't attach our panel\n"); + goto err_cleanup_connector; + } + } + + if (bridge) { + ret = drm_bridge_attach(encoder, bridge, NULL); + if (ret) { + dev_err(drm->dev, "Couldn't attach our bridge\n"); + goto err_cleanup_connector; + } + } + + return 0; + +err_cleanup_connector: + drm_encoder_cleanup(&lvds->encoder); +err_out: + return ret; +} +EXPORT_SYMBOL(sun4i_lvds_init); diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.h b/drivers/gpu/drm/sun4i/sun4i_lvds.h new file mode 100644 index 000000000000..1b8fad4b82c3 --- /dev/null +++ b/drivers/gpu/drm/sun4i/sun4i_lvds.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2015 NextThing Co + * Copyright (C) 2015-2017 Free Electrons + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef _SUN4I_LVDS_H_ +#define _SUN4I_LVDS_H_ + +int sun4i_lvds_init(struct drm_device *drm, struct sun4i_tcon *tcon); + +#endif /* _SUN4I_LVDS_H_ */ diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 3efa1ab045cd..6a20a467ee6d 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -31,10 +31,52 @@ #include "sun4i_crtc.h" #include "sun4i_dotclock.h" #include "sun4i_drv.h" +#include "sun4i_lvds.h" #include "sun4i_rgb.h" #include "sun4i_tcon.h" #include "sunxi_engine.h" +static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_connector_list_iter iter; + + drm_connector_list_iter_begin(encoder->dev, &iter); + drm_for_each_connector_iter(connector, &iter) + if (connector->encoder == encoder) { + drm_connector_list_iter_end(&iter); + return connector; + } + drm_connector_list_iter_end(&iter); + + return NULL; +} + +static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_display_info *info; + + connector = sun4i_tcon_get_connector(encoder); + if (!connector) + return -EINVAL; + + info = &connector->display_info; + if (info->num_bus_formats != 1) + return -EINVAL; + + switch (info->bus_formats[0]) { + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: + return 18; + + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: + return 24; + } + + return -EINVAL; +} + static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel, bool enabled) { @@ -69,9 +111,13 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, const struct drm_encoder *encoder, bool enabled) { + bool is_lvds = false; int channel; switch (encoder->encoder_type) { + case DRM_MODE_ENCODER_LVDS: + is_lvds = true; + /* Fallthrough */ case DRM_MODE_ENCODER_NONE: channel = 0; break; @@ -84,10 +130,47 @@ void sun4i_tcon_set_status(struct sun4i_tcon *tcon, return; } + if (is_lvds && !enabled) + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, + SUN4I_TCON0_LVDS_IF_EN, 0); + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_TCON_ENABLE, enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0); + if (is_lvds && enabled) { + u8 val; + + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, + SUN4I_TCON0_LVDS_IF_EN, + SUN4I_TCON0_LVDS_IF_EN); + + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, + SUN4I_TCON0_LVDS_ANA0_C(2) | + SUN4I_TCON0_LVDS_ANA0_V(3) | + SUN4I_TCON0_LVDS_ANA0_PD(2) | + SUN4I_TCON0_LVDS_ANA0_EN_LDO); + udelay(2); + + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, + SUN4I_TCON0_LVDS_ANA0_EN_MB, + SUN4I_TCON0_LVDS_ANA0_EN_MB); + udelay(2); + + regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, + SUN4I_TCON0_LVDS_ANA0_EN_DRVC, + SUN4I_TCON0_LVDS_ANA0_EN_DRVC); + + if (sun4i_tcon_get_pixel_depth(encoder) == 18) + val = 7; + else + val = 0xf; + + regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG, + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(0xf), + SUN4I_TCON0_LVDS_ANA0_EN_DRVD(val)); + } + sun4i_tcon_channel_set_status(tcon, channel, enabled); } @@ -170,6 +253,78 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon, SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay)); } +static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, + const struct drm_encoder *encoder, + const struct drm_display_mode *mode) +{ + unsigned int bp; + u8 clk_delay; + u32 reg, val = 0; + + tcon->dclk_min_div = 7; + tcon->dclk_max_div = 7; + sun4i_tcon0_mode_set_common(tcon, mode); + + /* Adjust clock delay */ + clk_delay = sun4i_tcon_get_clk_delay(mode, 0); + regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG, + SUN4I_TCON0_CTL_CLK_DELAY_MASK, + SUN4I_TCON0_CTL_CLK_DELAY(clk_delay)); + + /* + * This is called a backporch in the register documentation, + * but it really is the back porch + hsync + */ + bp = mode->crtc_htotal - mode->crtc_hsync_start; + DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", + mode->crtc_htotal, bp); + + /* Set horizontal display timings */ + regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG, + SUN4I_TCON0_BASIC1_H_TOTAL(0x554) | + SUN4I_TCON0_BASIC1_H_BACKPORCH(0xa0)); + + /* + * This is called a backporch in the register documentation, + * but it really is the back porch + hsync + */ + bp = mode->crtc_vtotal - mode->crtc_vsync_start; + DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", + mode->crtc_vtotal, bp); + + /* Set vertical display timings */ + regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG, + SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) | + SUN4I_TCON0_BASIC2_V_BACKPORCH(0x17)); + + reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 | + SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL | + SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL; + if (sun4i_tcon_get_pixel_depth(encoder) == 24) + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS; + else + reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS; + + regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg); + + /* Setup the polarity of the various signals */ + if (!(mode->flags & DRM_MODE_FLAG_PHSYNC)) + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; + + if (!(mode->flags & DRM_MODE_FLAG_PVSYNC)) + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, 0); + + /* Map output pins to channel 0 */ + regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, + SUN4I_TCON_GCTL_IOMAP_MASK, + SUN4I_TCON_GCTL_IOMAP_TCON0); + + /* Enable the output on the pins */ + regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000); +} + static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { @@ -336,6 +491,9 @@ void sun4i_tcon_mode_set(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { switch (encoder->encoder_type) { + case DRM_MODE_ENCODER_LVDS: + sun4i_tcon0_mode_set_lvds(tcon, encoder, mode); + break; case DRM_MODE_ENCODER_NONE: sun4i_tcon0_mode_set_rgb(tcon, mode); sun4i_tcon_set_mux(tcon, 0, encoder); @@ -667,7 +825,9 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, struct drm_device *drm = data; struct sun4i_drv *drv = drm->dev_private; struct sunxi_engine *engine; + struct device_node *remote; struct sun4i_tcon *tcon; + bool has_lvds; int ret; engine = sun4i_tcon_find_engine(drv, dev->of_node); @@ -698,6 +858,26 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, return ret; } + /* + * This can only be made optional since we've had DT nodes + * without the LVDS reset properties. + * + * If the property is missing, just disable LVDS, and print a + * warning. + */ + tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds"); + if (IS_ERR(tcon->lvds_rst)) { + dev_err(dev, "Couldn't get our reset line\n"); + return PTR_ERR(tcon->lvds_rst); + } else if (tcon->lvds_rst) { + has_lvds = true; + reset_control_reset(tcon->lvds_rst); + } else { + has_lvds = false; + dev_warn(dev, + "Missing LVDS reset property, you should consider upgrading your DT\n"); + } + ret = sun4i_tcon_init_clocks(dev, tcon); if (ret) { dev_err(dev, "Couldn't init our TCON clocks\n"); @@ -729,7 +909,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master, goto err_free_clocks; } - ret = sun4i_rgb_init(drm, tcon); + /* + * If we have an LVDS panel connected to the TCON, we should + * just probe the LVDS connector. Otherwise, just probe RGB as + * we used to. + */ + remote = of_graph_get_remote_node(dev->of_node, 1, 0); + if (has_lvds && of_device_is_compatible(remote, "panel-lvds")) + ret = sun4i_lvds_init(drm, tcon); + else + ret = sun4i_rgb_init(drm, tcon); + of_node_put(remote); + if (ret < 0) goto err_free_clocks; diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index 4141fbd97ddf..382689e5396e 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -70,7 +70,21 @@ #define SUN4I_TCON0_TTL2_REG 0x78 #define SUN4I_TCON0_TTL3_REG 0x7c #define SUN4I_TCON0_TTL4_REG 0x80 + #define SUN4I_TCON0_LVDS_IF_REG 0x84 +#define SUN4I_TCON0_LVDS_IF_EN BIT(31) +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_MASK BIT(26) +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS (1 << 26) +#define SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS (0 << 26) +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_MASK BIT(20) +#define SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 (1 << 20) +#define SUN4I_TCON0_LVDS_IF_CLK_POL_MASK BIT(4) +#define SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL (1 << 4) +#define SUN4I_TCON0_LVDS_IF_CLK_POL_INV (0 << 4) +#define SUN4I_TCON0_LVDS_IF_DATA_POL_MASK GENMASK(3, 0) +#define SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL (0xf) +#define SUN4I_TCON0_LVDS_IF_DATA_POL_INV (0) + #define SUN4I_TCON0_IO_POL_REG 0x88 #define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28) #define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25) @@ -131,6 +145,16 @@ #define SUN4I_TCON_CEU_RANGE_G_REG 0x144 #define SUN4I_TCON_CEU_RANGE_B_REG 0x148 #define SUN4I_TCON_MUX_CTRL_REG 0x200 + +#define SUN4I_TCON0_LVDS_ANA0_REG 0x220 +#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(31) +#define SUN4I_TCON0_LVDS_ANA0_EN_LDO BIT(30) +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVC BIT(24) +#define SUN4I_TCON0_LVDS_ANA0_EN_DRVD(x) (((x) & 0xf) << 20) +#define SUN4I_TCON0_LVDS_ANA0_C(x) (((x) & 3) << 17) +#define SUN4I_TCON0_LVDS_ANA0_V(x) (((x) & 3) << 8) +#define SUN4I_TCON0_LVDS_ANA0_PD(x) (((x) & 3) << 4) + #define SUN4I_TCON1_FILL_CTL_REG 0x300 #define SUN4I_TCON1_FILL_BEG0_REG 0x304 #define SUN4I_TCON1_FILL_END0_REG 0x308 @@ -174,6 +198,7 @@ struct sun4i_tcon { /* Reset control */ struct reset_control *lcd_rst; + struct reset_control *lvds_rst; struct drm_panel *panel;
The TCON supports the LVDS interface to output to a panel or a bridge. Let's add support for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- drivers/gpu/drm/sun4i/Makefile | 1 +- drivers/gpu/drm/sun4i/sun4i_lvds.c | 183 ++++++++++++++++++++++++++++- drivers/gpu/drm/sun4i/sun4i_lvds.h | 18 +++- drivers/gpu/drm/sun4i/sun4i_tcon.c | 193 +++++++++++++++++++++++++++++- drivers/gpu/drm/sun4i/sun4i_tcon.h | 25 ++++- 5 files changed, 419 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.c create mode 100644 drivers/gpu/drm/sun4i/sun4i_lvds.h