diff mbox

iio/light/opt3001: Use common error handling code in opt3001_get_lux()

Message ID c0b3ce73-db0d-c481-51be-2047b07c9f63@users.sourceforge.net (mailing list archive)
State New, archived
Headers show

Commit Message

SF Markus Elfring Oct. 26, 2017, 12:17 p.m. UTC 
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 26 Oct 2017 14:06:49 +0200

* Add jump targets so that two error messages are stored only once
  at the end of this function implementation.

* Adjust condition checks.

* Replace string literals by references to two global constant variables
  in eight functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/iio/light/opt3001.c | 88 +++++++++++++++++++--------------------------
 1 file changed, 36 insertions(+), 52 deletions(-)

Comments

Alexandre Belloni Oct. 26, 2017, 1:48 p.m. UTC | #1 
On 26/10/2017 at 14:17:30 +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Thu, 26 Oct 2017 14:06:49 +0200
> 
> * Add jump targets so that two error messages are stored only once
>   at the end of this function implementation.
> 
> * Adjust condition checks.
> 
> * Replace string literals by references to two global constant variables
>   in eight functions.
> 
> This issue was detected by using the Coccinelle software.
> 
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
>  drivers/iio/light/opt3001.c | 88 +++++++++++++++++++--------------------------
>  1 file changed, 36 insertions(+), 52 deletions(-)
> 
> diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
> index 54d88b60e303..23d7d4e6ae61 100644
> --- a/drivers/iio/light/opt3001.c
> +++ b/drivers/iio/light/opt3001.c
> @@ -77,6 +77,9 @@
>  #define OPT3001_RESULT_READY_SHORT	150
>  #define OPT3001_RESULT_READY_LONG	1000
>  
> +static char const read_failure[] = "failed to read register %02x\n";
> +static char const write_failure[] = "failed to write register %02x\n";
> +

If you are going to do that, why don't you use only one string: "failed
to %s register %02x\n"?
Dan Carpenter Oct. 26, 2017, 2:07 p.m. UTC | #2 
On Thu, Oct 26, 2017 at 03:48:52PM +0200, Alexandre Belloni wrote:
> On 26/10/2017 at 14:17:30 +0200, SF Markus Elfring wrote:
> > From: Markus Elfring <elfring@users.sourceforge.net>
> > Date: Thu, 26 Oct 2017 14:06:49 +0200
> > 
> > * Add jump targets so that two error messages are stored only once
> >   at the end of this function implementation.
> > 
> > * Adjust condition checks.
> > 
> > * Replace string literals by references to two global constant variables
> >   in eight functions.
> > 
> > This issue was detected by using the Coccinelle software.
> > 
> > Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> > ---
> >  drivers/iio/light/opt3001.c | 88 +++++++++++++++++++--------------------------
> >  1 file changed, 36 insertions(+), 52 deletions(-)
> > 
> > diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
> > index 54d88b60e303..23d7d4e6ae61 100644
> > --- a/drivers/iio/light/opt3001.c
> > +++ b/drivers/iio/light/opt3001.c
> > @@ -77,6 +77,9 @@
> >  #define OPT3001_RESULT_READY_SHORT	150
> >  #define OPT3001_RESULT_READY_LONG	1000
> >  
> > +static char const read_failure[] = "failed to read register %02x\n";
> > +static char const write_failure[] = "failed to write register %02x\n";
> > +
> 
> If you are going to do that

The answer to that question is we're not going to do that...  Please
stop taking bad ideas and making them even more complicated and worse.

regards,
dan carpenter


--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alexandre Belloni Oct. 26, 2017, 2:50 p.m. UTC | #3 
On 26/10/2017 at 17:07:43 +0300, Dan Carpenter wrote:
> On Thu, Oct 26, 2017 at 03:48:52PM +0200, Alexandre Belloni wrote:
> > On 26/10/2017 at 14:17:30 +0200, SF Markus Elfring wrote:
> > > From: Markus Elfring <elfring@users.sourceforge.net>
> > > Date: Thu, 26 Oct 2017 14:06:49 +0200
> > > 
> > > * Add jump targets so that two error messages are stored only once
> > >   at the end of this function implementation.
> > > 
> > > * Adjust condition checks.
> > > 
> > > * Replace string literals by references to two global constant variables
> > >   in eight functions.
> > > 
> > > This issue was detected by using the Coccinelle software.
> > > 
> > > Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> > > ---
> > >  drivers/iio/light/opt3001.c | 88 +++++++++++++++++++--------------------------
> > >  1 file changed, 36 insertions(+), 52 deletions(-)
> > > 
> > > diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
> > > index 54d88b60e303..23d7d4e6ae61 100644
> > > --- a/drivers/iio/light/opt3001.c
> > > +++ b/drivers/iio/light/opt3001.c
> > > @@ -77,6 +77,9 @@
> > >  #define OPT3001_RESULT_READY_SHORT	150
> > >  #define OPT3001_RESULT_READY_LONG	1000
> > >  
> > > +static char const read_failure[] = "failed to read register %02x\n";
> > > +static char const write_failure[] = "failed to write register %02x\n";
> > > +
> > 
> > If you are going to do that
> 
> The answer to that question is we're not going to do that...  Please
> stop taking bad ideas and making them even more complicated and worse.
> 

I just wanted to know how far he was able to push his reasoning. And
hopefully waste a bit of his time.

I don't expect anyone to take patches from Markus seriously.
diff mbox

Patch

diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 54d88b60e303..23d7d4e6ae61 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -77,6 +77,9 @@ 
 #define OPT3001_RESULT_READY_SHORT	150
 #define OPT3001_RESULT_READY_LONG	1000
 
+static char const read_failure[] = "failed to read register %02x\n";
+static char const write_failure[] = "failed to write register %02x\n";
+
 struct opt3001 {
 	struct i2c_client	*client;
 	struct device		*dev;
@@ -246,11 +249,8 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 		ret = i2c_smbus_write_word_swapped(opt->client,
 					OPT3001_LOW_LIMIT,
 					OPT3001_LOW_LIMIT_EOC_ENABLE);
-		if (ret < 0) {
-			dev_err(opt->dev, "failed to write register %02x\n",
-					OPT3001_LOW_LIMIT);
-			return ret;
-		}
+		if (ret)
+			goto report_write_failure;
 
 		/* Allow IRQ to access the device despite lock being set */
 		opt->ok_to_ignore_lock = true;
@@ -261,20 +261,16 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 
 	/* Configure for single-conversion mode and start a new conversion */
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
-	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
-		goto err;
-	}
+	if (ret < 0)
+		goto report_read_failure;
 
 	reg = ret;
 	opt3001_set_mode(opt, &reg, OPT3001_CONFIGURATION_M_SINGLE);
 
 	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
 			reg);
-	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_CONFIGURATION);
+	if (ret) {
+		dev_err(opt->dev, write_failure, OPT3001_CONFIGURATION);
 		goto err;
 	}
 
@@ -292,11 +288,8 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 		/* Check result ready flag */
 		ret = i2c_smbus_read_word_swapped(opt->client,
 						  OPT3001_CONFIGURATION);
-		if (ret < 0) {
-			dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
-			goto err;
-		}
+		if (ret < 0)
+			goto report_read_failure;
 
 		if (!(ret & OPT3001_CONFIGURATION_CRF)) {
 			ret = -ETIMEDOUT;
@@ -306,8 +299,7 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 		/* Obtain value */
 		ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
 		if (ret < 0) {
-			dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_RESULT);
+			dev_err(opt->dev, read_failure, OPT3001_RESULT);
 			goto err;
 		}
 		opt->result = ret;
@@ -336,11 +328,8 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 		ret = i2c_smbus_write_word_swapped(opt->client,
 						   OPT3001_LOW_LIMIT,
 						   value);
-		if (ret < 0) {
-			dev_err(opt->dev, "failed to write register %02x\n",
-					OPT3001_LOW_LIMIT);
-			return ret;
-		}
+		if (ret)
+			goto report_write_failure;
 	}
 
 	exponent = OPT3001_REG_EXPONENT(opt->result);
@@ -349,6 +338,14 @@  static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
 	opt3001_to_iio_ret(opt, exponent, mantissa, val, val2);
 
 	return IIO_VAL_INT_PLUS_MICRO;
+
+report_read_failure:
+	dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
+	goto err;
+
+report_write_failure:
+	dev_err(opt->dev, write_failure, OPT3001_LOW_LIMIT);
+	return ret;
 }
 
 static int opt3001_get_int_time(struct opt3001 *opt, int *val, int *val2)
@@ -366,8 +363,7 @@  static int opt3001_set_int_time(struct opt3001 *opt, int time)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
 		return ret;
 	}
 
@@ -521,7 +517,7 @@  static int opt3001_write_event_value(struct iio_dev *iio,
 
 	ret = i2c_smbus_write_word_swapped(opt->client, reg, value);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n", reg);
+		dev_err(opt->dev, write_failure, reg);
 		goto err;
 	}
 
@@ -562,8 +558,7 @@  static int opt3001_write_event_config(struct iio_dev *iio,
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
 		goto err;
 	}
 
@@ -573,8 +568,7 @@  static int opt3001_write_event_config(struct iio_dev *iio,
 	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
 			reg);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, write_failure, OPT3001_CONFIGURATION);
 		goto err;
 	}
 
@@ -602,8 +596,7 @@  static int opt3001_read_id(struct opt3001 *opt)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_MANUFACTURER_ID);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_MANUFACTURER_ID);
+		dev_err(opt->dev, read_failure, OPT3001_MANUFACTURER_ID);
 		return ret;
 	}
 
@@ -612,8 +605,7 @@  static int opt3001_read_id(struct opt3001 *opt)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_DEVICE_ID);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_DEVICE_ID);
+		dev_err(opt->dev, read_failure, OPT3001_DEVICE_ID);
 		return ret;
 	}
 
@@ -632,8 +624,7 @@  static int opt3001_configure(struct opt3001 *opt)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
 		return ret;
 	}
 
@@ -661,15 +652,13 @@  static int opt3001_configure(struct opt3001 *opt)
 	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
 			reg);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, write_failure, OPT3001_CONFIGURATION);
 		return ret;
 	}
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_LOW_LIMIT);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_LOW_LIMIT);
+		dev_err(opt->dev, read_failure, OPT3001_LOW_LIMIT);
 		return ret;
 	}
 
@@ -678,8 +667,7 @@  static int opt3001_configure(struct opt3001 *opt)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_HIGH_LIMIT);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_HIGH_LIMIT);
+		dev_err(opt->dev, read_failure, OPT3001_HIGH_LIMIT);
 		return ret;
 	}
 
@@ -700,8 +688,7 @@  static irqreturn_t opt3001_irq(int irq, void *_iio)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
 		goto out;
 	}
 
@@ -722,8 +709,7 @@  static irqreturn_t opt3001_irq(int irq, void *_iio)
 	} else if (ret & OPT3001_CONFIGURATION_CRF) {
 		ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
 		if (ret < 0) {
-			dev_err(opt->dev, "failed to read register %02x\n",
-					OPT3001_RESULT);
+			dev_err(opt->dev, read_failure, OPT3001_RESULT);
 			goto out;
 		}
 		opt->result = ret;
@@ -810,8 +796,7 @@  static int opt3001_remove(struct i2c_client *client)
 
 	ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to read register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, read_failure, OPT3001_CONFIGURATION);
 		return ret;
 	}
 
@@ -821,8 +806,7 @@  static int opt3001_remove(struct i2c_client *client)
 	ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_CONFIGURATION,
 			reg);
 	if (ret < 0) {
-		dev_err(opt->dev, "failed to write register %02x\n",
-				OPT3001_CONFIGURATION);
+		dev_err(opt->dev, write_failure, OPT3001_CONFIGURATION);
 		return ret;
 	}