diff mbox

[v2] PCI: rcar: Use common error handling code in rcar_pcie_enable_msi()

Message ID a55409b0-9839-d9b5-5c90-606c22d0c58b@users.sourceforge.net (mailing list archive)
State Under Review
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

SF Markus Elfring Nov. 2, 2017, 1 p.m. UTC
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Thu, 2 Nov 2017 13:35:17 +0100

* Adjust a jump target so that a specific error message is stored only once
  at the end of this function implementation.

* Replace two calls of the function "dev_err" by goto statements.

This issue was detected by using the Coccinelle software.

Link: https://lkml.org/lkml/2017/11/2/140
Link: https://lkml.kernel.org/r/<20171102081239.bzaunax3uotejqja@verge.net.au>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---

v2:
An other jump label was requested by Simon Horman.

 drivers/pci/host/pcie-rcar.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

Comments

Geert Uytterhoeven Nov. 2, 2017, 7:25 p.m. UTC | #1
On Thu, Nov 2, 2017 at 2:00 PM, SF Markus Elfring
<elfring@users.sourceforge.net> wrote:
> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Thu, 2 Nov 2017 13:35:17 +0100
>
> * Adjust a jump target so that a specific error message is stored only once
>   at the end of this function implementation.
>
> * Replace two calls of the function "dev_err" by goto statements.
>
> This issue was detected by using the Coccinelle software.
>
> Link: https://lkml.org/lkml/2017/11/2/140
> Link: https://lkml.kernel.org/r/<20171102081239.bzaunax3uotejqja@verge.net.au>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
>
> v2:
> An other jump label was requested by Simon Horman.
>
>  drivers/pci/host/pcie-rcar.c | 15 ++++++---------
>  1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index 12796eccb2be..f3c1ffdf8072 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -873,18 +873,14 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
>         err = devm_request_irq(dev, msi->irq1, rcar_pcie_msi_irq,
>                                IRQF_SHARED | IRQF_NO_THREAD,
>                                rcar_msi_irq_chip.name, pcie);
> -       if (err < 0) {
> -               dev_err(dev, "failed to request IRQ: %d\n", err);
> -               goto err;
> -       }
> +       if (err < 0)
> +               goto err_remove_domain;
>
>         err = devm_request_irq(dev, msi->irq2, rcar_pcie_msi_irq,
>                                IRQF_SHARED | IRQF_NO_THREAD,
>                                rcar_msi_irq_chip.name, pcie);
> -       if (err < 0) {
> -               dev_err(dev, "failed to request IRQ: %d\n", err);
> -               goto err;
> -       }
> +       if (err < 0)
> +               goto err_remove_domain;
>
>         /* setup MSI data target */
>         msi->pages = __get_free_pages(GFP_KERNEL, 0);
> @@ -898,7 +894,8 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
>
>         return 0;
>
> -err:
> +err_remove_domain:
> +       dev_err(dev, "failed to request IRQ: %d\n", err);

Moving the error message is confusing and counter-productive:
if you need to add another error case + goto err_remove_domain
later, you'll have to move it back to all the older cases.

Hence
NAKed-by: Geert Uytterhoeven <geert@linux-m68k.org>

>         irq_domain_remove(msi->domain);
>         return err;
>  }

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox

Patch

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 12796eccb2be..f3c1ffdf8072 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -873,18 +873,14 @@  static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	err = devm_request_irq(dev, msi->irq1, rcar_pcie_msi_irq,
 			       IRQF_SHARED | IRQF_NO_THREAD,
 			       rcar_msi_irq_chip.name, pcie);
-	if (err < 0) {
-		dev_err(dev, "failed to request IRQ: %d\n", err);
-		goto err;
-	}
+	if (err < 0)
+		goto err_remove_domain;
 
 	err = devm_request_irq(dev, msi->irq2, rcar_pcie_msi_irq,
 			       IRQF_SHARED | IRQF_NO_THREAD,
 			       rcar_msi_irq_chip.name, pcie);
-	if (err < 0) {
-		dev_err(dev, "failed to request IRQ: %d\n", err);
-		goto err;
-	}
+	if (err < 0)
+		goto err_remove_domain;
 
 	/* setup MSI data target */
 	msi->pages = __get_free_pages(GFP_KERNEL, 0);
@@ -898,7 +894,8 @@  static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 
 	return 0;
 
-err:
+err_remove_domain:
+	dev_err(dev, "failed to request IRQ: %d\n", err);
 	irq_domain_remove(msi->domain);
 	return err;
 }