| Message ID | 20171104140828.32469-5-hdegoede@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Nov 04, 2017 at 03:08:25PM +0100, Hans de Goede wrote: > Apply the "panel orientation" drm connector prop to the primary plane so > that fbcon and fbdev using userspace programs display the right way up. > > Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > --- > Changes in v2: > -New patch in v2 of this patch-set > > Changes in v3: > -Use a rotation member in struct drm_fb_helper_crtc and set that from > drm_setup_crtcs instead of looping over all crtc's to find the right one > later > -Since we now no longer look at rotation quirks directly in the fbcon > code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright > and we cannot use hardware rotation > > Changes in v4: > -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to > DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the > plane_state's rotation to an invalid value for disabled crtcs > (caught by Fi.CI) > > Changes in v5: > -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, > 90 / 270 degree rotation requires special handling which we lack atm > -Add a TODO comment for 90 / 270 degree hardware rotation > -Add some comments to better document the default case when mapping > sw_rotations to fbcon_rotate_hints Yeah the above stuff really needs to be in the commit message. Or you need to explain in prose, but just copying the changelog is easier. People forgetting to update the patch justification is the no1 reason we want to record the changelogs ... Otherwise lgtm Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> > --- > drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++- > include/drm/drm_fb_helper.h | 8 ++++ > 2 files changed, 96 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c > index 116d1f1337c7..5a557488bff4 100644 > --- a/drivers/gpu/drm/drm_fb_helper.c > +++ b/drivers/gpu/drm/drm_fb_helper.c > @@ -41,6 +41,7 @@ > #include <drm/drm_atomic.h> > #include <drm/drm_atomic_helper.h> > > +#include "drm_crtc_internal.h" > #include "drm_crtc_helper_internal.h" > > static bool drm_fbdev_emulation = true; > @@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave); > static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active) > { > struct drm_device *dev = fb_helper->dev; > + struct drm_plane_state *plane_state; > struct drm_plane *plane; > struct drm_atomic_state *state; > int i, ret; > @@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ > retry: > plane_mask = 0; > drm_for_each_plane(plane, dev) { > - struct drm_plane_state *plane_state; > - > plane_state = drm_atomic_get_plane_state(state, plane); > if (IS_ERR(plane_state)) { > ret = PTR_ERR(plane_state); > @@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ > > for (i = 0; i < fb_helper->crtc_count; i++) { > struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; > + struct drm_plane *primary = mode_set->crtc->primary; > + > + /* Cannot fail as we've already gotten the plane state above */ > + plane_state = drm_atomic_get_new_plane_state(state, primary); > + plane_state->rotation = fb_helper->crtc_info[i].rotation; > > ret = __drm_atomic_helper_set_config(mode_set, state); > if (ret != 0) > @@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev, > if (!fb_helper->crtc_info[i].mode_set.connectors) > goto out_free; > fb_helper->crtc_info[i].mode_set.num_connectors = 0; > + fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0; > } > > i = 0; > @@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper, > return best_score; > } > > +/* > + * This function checks if rotation is necessary because of panel orientation > + * and if it is, if it is supported. > + * If rotation is necessary and supported, its gets set in fb_crtc.rotation. > + * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets > + * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only > + * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do > + * the unsupported rotation. > + */ > +static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper, > + struct drm_fb_helper_crtc *fb_crtc, > + struct drm_connector *connector) > +{ > + struct drm_plane *plane = fb_crtc->mode_set.crtc->primary; > + uint64_t valid_mask = 0; > + int i, rotation; > + > + fb_crtc->rotation = DRM_MODE_ROTATE_0; > + > + switch (connector->display_info.panel_orientation) { > + case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: > + rotation = DRM_MODE_ROTATE_180; > + break; > + case DRM_MODE_PANEL_ORIENTATION_LEFT_UP: > + rotation = DRM_MODE_ROTATE_90; > + break; > + case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: > + rotation = DRM_MODE_ROTATE_270; > + break; > + default: > + rotation = DRM_MODE_ROTATE_0; > + } > + > + /* > + * TODO: support 90 / 270 degree hardware rotation, > + * depending on the hardware this may require the framebuffer > + * to be in a specific tiling format. > + */ > + if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) { > + fb_helper->sw_rotations |= rotation; > + return; > + } > + > + for (i = 0; i < plane->rotation_property->num_values; i++) > + valid_mask |= (1ULL << plane->rotation_property->values[i]); > + > + if (!(rotation & valid_mask)) { > + fb_helper->sw_rotations |= rotation; > + return; > + } > + > + fb_crtc->rotation = rotation; > + /* Rotating in hardware, fbcon should not rotate */ > + fb_helper->sw_rotations |= DRM_MODE_ROTATE_0; > +} > + > static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, > u32 width, u32 height) > { > @@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, > drm_fb_helper_modeset_release(fb_helper, > &fb_helper->crtc_info[i].mode_set); > > + fb_helper->sw_rotations = 0; > drm_fb_helper_for_each_connector(fb_helper, i) { > struct drm_display_mode *mode = modes[i]; > struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; > @@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, > modeset->mode = drm_mode_duplicate(dev, > fb_crtc->desired_mode); > drm_connector_get(connector); > + drm_setup_crtc_rotation(fb_helper, fb_crtc, connector); > modeset->connectors[modeset->num_connectors++] = connector; > modeset->x = offset->x; > modeset->y = offset->y; > @@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper) > } > } > mutex_unlock(&fb_helper->dev->mode_config.mutex); > + > + switch (fb_helper->sw_rotations) { > + case DRM_MODE_ROTATE_0: > + info->fbcon_rotate_hint = FB_ROTATE_UR; > + break; > + case DRM_MODE_ROTATE_90: > + info->fbcon_rotate_hint = FB_ROTATE_CCW; > + break; > + case DRM_MODE_ROTATE_180: > + info->fbcon_rotate_hint = FB_ROTATE_UD; > + break; > + case DRM_MODE_ROTATE_270: > + info->fbcon_rotate_hint = FB_ROTATE_CW; > + break; > + default: > + /* > + * Multiple bits are set / multiple rotations requested > + * fbcon cannot handle separate rotation settings per > + * output, so fallback to unrotated. > + */ > + info->fbcon_rotate_hint = FB_ROTATE_UR; > + } > } > > /* Note: Drops fb_helper->lock before returning. */ > diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h > index 33fe95927742..7fca941c2c57 100644 > --- a/include/drm/drm_fb_helper.h > +++ b/include/drm/drm_fb_helper.h > @@ -48,6 +48,7 @@ struct drm_fb_helper_crtc { > struct drm_mode_set mode_set; > struct drm_display_mode *desired_mode; > int x, y; > + int rotation; > }; > > /** > @@ -158,6 +159,13 @@ struct drm_fb_helper { > struct drm_fb_helper_crtc *crtc_info; > int connector_count; > int connector_info_alloc_count; > + /** > + * @rotations: > + * Bitmask of all rotations requested for panel-orientation which > + * could not be handled in hardware. If only one bit is set > + * fbdev->fbcon_rotate_hint gets set to the requested rotation. > + */ > + int sw_rotations; > /** > * @connector_info: > * > -- > 2.14.3 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 116d1f1337c7..5a557488bff4 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -41,6 +41,7 @@ #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> +#include "drm_crtc_internal.h" #include "drm_crtc_helper_internal.h" static bool drm_fbdev_emulation = true; @@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave); static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active) { struct drm_device *dev = fb_helper->dev; + struct drm_plane_state *plane_state; struct drm_plane *plane; struct drm_atomic_state *state; int i, ret; @@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ retry: plane_mask = 0; drm_for_each_plane(plane, dev) { - struct drm_plane_state *plane_state; - plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) { ret = PTR_ERR(plane_state); @@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ for (i = 0; i < fb_helper->crtc_count; i++) { struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; + struct drm_plane *primary = mode_set->crtc->primary; + + /* Cannot fail as we've already gotten the plane state above */ + plane_state = drm_atomic_get_new_plane_state(state, primary); + plane_state->rotation = fb_helper->crtc_info[i].rotation; ret = __drm_atomic_helper_set_config(mode_set, state); if (ret != 0) @@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev, if (!fb_helper->crtc_info[i].mode_set.connectors) goto out_free; fb_helper->crtc_info[i].mode_set.num_connectors = 0; + fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0; } i = 0; @@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper, return best_score; } +/* + * This function checks if rotation is necessary because of panel orientation + * and if it is, if it is supported. + * If rotation is necessary and supported, its gets set in fb_crtc.rotation. + * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets + * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only + * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do + * the unsupported rotation. + */ +static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper, + struct drm_fb_helper_crtc *fb_crtc, + struct drm_connector *connector) +{ + struct drm_plane *plane = fb_crtc->mode_set.crtc->primary; + uint64_t valid_mask = 0; + int i, rotation; + + fb_crtc->rotation = DRM_MODE_ROTATE_0; + + switch (connector->display_info.panel_orientation) { + case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: + rotation = DRM_MODE_ROTATE_180; + break; + case DRM_MODE_PANEL_ORIENTATION_LEFT_UP: + rotation = DRM_MODE_ROTATE_90; + break; + case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: + rotation = DRM_MODE_ROTATE_270; + break; + default: + rotation = DRM_MODE_ROTATE_0; + } + + /* + * TODO: support 90 / 270 degree hardware rotation, + * depending on the hardware this may require the framebuffer + * to be in a specific tiling format. + */ + if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) { + fb_helper->sw_rotations |= rotation; + return; + } + + for (i = 0; i < plane->rotation_property->num_values; i++) + valid_mask |= (1ULL << plane->rotation_property->values[i]); + + if (!(rotation & valid_mask)) { + fb_helper->sw_rotations |= rotation; + return; + } + + fb_crtc->rotation = rotation; + /* Rotating in hardware, fbcon should not rotate */ + fb_helper->sw_rotations |= DRM_MODE_ROTATE_0; +} + static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, u32 width, u32 height) { @@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, drm_fb_helper_modeset_release(fb_helper, &fb_helper->crtc_info[i].mode_set); + fb_helper->sw_rotations = 0; drm_fb_helper_for_each_connector(fb_helper, i) { struct drm_display_mode *mode = modes[i]; struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; @@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper, modeset->mode = drm_mode_duplicate(dev, fb_crtc->desired_mode); drm_connector_get(connector); + drm_setup_crtc_rotation(fb_helper, fb_crtc, connector); modeset->connectors[modeset->num_connectors++] = connector; modeset->x = offset->x; modeset->y = offset->y; @@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper) } } mutex_unlock(&fb_helper->dev->mode_config.mutex); + + switch (fb_helper->sw_rotations) { + case DRM_MODE_ROTATE_0: + info->fbcon_rotate_hint = FB_ROTATE_UR; + break; + case DRM_MODE_ROTATE_90: + info->fbcon_rotate_hint = FB_ROTATE_CCW; + break; + case DRM_MODE_ROTATE_180: + info->fbcon_rotate_hint = FB_ROTATE_UD; + break; + case DRM_MODE_ROTATE_270: + info->fbcon_rotate_hint = FB_ROTATE_CW; + break; + default: + /* + * Multiple bits are set / multiple rotations requested + * fbcon cannot handle separate rotation settings per + * output, so fallback to unrotated. + */ + info->fbcon_rotate_hint = FB_ROTATE_UR; + } } /* Note: Drops fb_helper->lock before returning. */ diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 33fe95927742..7fca941c2c57 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -48,6 +48,7 @@ struct drm_fb_helper_crtc { struct drm_mode_set mode_set; struct drm_display_mode *desired_mode; int x, y; + int rotation; }; /** @@ -158,6 +159,13 @@ struct drm_fb_helper { struct drm_fb_helper_crtc *crtc_info; int connector_count; int connector_info_alloc_count; + /** + * @rotations: + * Bitmask of all rotations requested for panel-orientation which + * could not be handled in hardware. If only one bit is set + * fbdev->fbcon_rotate_hint gets set to the requested rotation. + */ + int sw_rotations; /** * @connector_info: *
Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -New patch in v2 of this patch-set Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints --- drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++- include/drm/drm_fb_helper.h | 8 ++++ 2 files changed, 96 insertions(+), 2 deletions(-)