Message ID | 20171104202009.3818-7-wsa+renesas@sang-engineering.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Sat, 4 Nov 2017 21:20:06 +0100 Wolfram Sang <wsa+renesas@sang-engineering.com> wrote: > For all block commands, try to allocate a DMA safe buffer and mark it > accordingly. Only use the stack, if the buffers cannot be allocated. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Hmm. Interesting balance here as this adds allocations to paths where the i2c master can't take advantage. Not ideal, but perhaps not worth the hassle of working around it? It's only for the block calls I guess so not that major an issue. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > drivers/i2c/i2c-core-smbus.c | 45 ++++++++++++++++++++++++++++++++++++++------ > 1 file changed, 39 insertions(+), 6 deletions(-) > > diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c > index 4bb9927afd0106..931c274fe26809 100644 > --- a/drivers/i2c/i2c-core-smbus.c > +++ b/drivers/i2c/i2c-core-smbus.c > @@ -18,6 +18,7 @@ > #include <linux/err.h> > #include <linux/i2c.h> > #include <linux/i2c-smbus.h> > +#include <linux/slab.h> > > #define CREATE_TRACE_POINTS > #include <trace/events/smbus.h> > @@ -291,6 +292,22 @@ s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, > } > EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); > > +static void i2c_smbus_try_get_dmabuf(struct i2c_msg *msg, u8 init_val) > +{ > + bool is_read = msg->flags & I2C_M_RD; > + unsigned char *dma_buf; > + > + dma_buf = kzalloc(I2C_SMBUS_BLOCK_MAX + (is_read ? 2 : 3), GFP_KERNEL); > + if (!dma_buf) > + return; > + > + msg->buf = dma_buf; > + msg->flags |= I2C_M_DMA_SAFE; > + > + if (init_val) > + msg->buf[0] = init_val; > + > +} > /* Simulate a SMBus command using the i2c protocol > No checking of parameters is done! */ > static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > @@ -368,6 +385,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > msg[1].flags |= I2C_M_RECV_LEN; > msg[1].len = 1; /* block length will be added by > the underlying bus driver */ > + i2c_smbus_try_get_dmabuf(&msg[1], 0); > } else { > msg[0].len = data->block[0] + 2; > if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { > @@ -376,8 +394,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > data->block[0]); > return -EINVAL; > } > + > + i2c_smbus_try_get_dmabuf(&msg[0], command); > for (i = 1; i < msg[0].len; i++) > - msgbuf0[i] = data->block[i-1]; > + msg[0].buf[i] = data->block[i-1]; > } > break; > case I2C_SMBUS_BLOCK_PROC_CALL: > @@ -389,16 +409,21 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > data->block[0]); > return -EINVAL; > } > + > msg[0].len = data->block[0] + 2; > + i2c_smbus_try_get_dmabuf(&msg[0], command); > for (i = 1; i < msg[0].len; i++) > - msgbuf0[i] = data->block[i-1]; > + msg[0].buf[i] = data->block[i-1]; > + > msg[1].flags |= I2C_M_RECV_LEN; > msg[1].len = 1; /* block length will be added by > the underlying bus driver */ > + i2c_smbus_try_get_dmabuf(&msg[1], 0); > break; > case I2C_SMBUS_I2C_BLOCK_DATA: > if (read_write == I2C_SMBUS_READ) { > msg[1].len = data->block[0]; > + i2c_smbus_try_get_dmabuf(&msg[1], 0); > } else { > msg[0].len = data->block[0] + 1; > if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { > @@ -407,8 +432,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > data->block[0]); > return -EINVAL; > } > + > + i2c_smbus_try_get_dmabuf(&msg[0], command); > for (i = 1; i <= data->block[0]; i++) > - msgbuf0[i] = data->block[i]; > + msg[0].buf[i] = data->block[i]; > } > break; > default: > @@ -456,14 +483,20 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > break; > case I2C_SMBUS_I2C_BLOCK_DATA: > for (i = 0; i < data->block[0]; i++) > - data->block[i+1] = msgbuf1[i]; > + data->block[i+1] = msg[1].buf[i]; > break; > case I2C_SMBUS_BLOCK_DATA: > case I2C_SMBUS_BLOCK_PROC_CALL: > - for (i = 0; i < msgbuf1[0] + 1; i++) > - data->block[i] = msgbuf1[i]; > + for (i = 0; i < msg[1].buf[0] + 1; i++) > + data->block[i] = msg[1].buf[i]; > break; > } > + > + if (msg[0].flags & I2C_M_DMA_SAFE) > + kfree(msg[0].buf); > + if (msg[1].flags & I2C_M_DMA_SAFE) > + kfree(msg[1].buf); > + > return 0; > } >
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 4bb9927afd0106..931c274fe26809 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -18,6 +18,7 @@ #include <linux/err.h> #include <linux/i2c.h> #include <linux/i2c-smbus.h> +#include <linux/slab.h> #define CREATE_TRACE_POINTS #include <trace/events/smbus.h> @@ -291,6 +292,22 @@ s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, } EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data); +static void i2c_smbus_try_get_dmabuf(struct i2c_msg *msg, u8 init_val) +{ + bool is_read = msg->flags & I2C_M_RD; + unsigned char *dma_buf; + + dma_buf = kzalloc(I2C_SMBUS_BLOCK_MAX + (is_read ? 2 : 3), GFP_KERNEL); + if (!dma_buf) + return; + + msg->buf = dma_buf; + msg->flags |= I2C_M_DMA_SAFE; + + if (init_val) + msg->buf[0] = init_val; + +} /* Simulate a SMBus command using the i2c protocol No checking of parameters is done! */ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, @@ -368,6 +385,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, msg[1].flags |= I2C_M_RECV_LEN; msg[1].len = 1; /* block length will be added by the underlying bus driver */ + i2c_smbus_try_get_dmabuf(&msg[1], 0); } else { msg[0].len = data->block[0] + 2; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { @@ -376,8 +394,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, data->block[0]); return -EINVAL; } + + i2c_smbus_try_get_dmabuf(&msg[0], command); for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; + msg[0].buf[i] = data->block[i-1]; } break; case I2C_SMBUS_BLOCK_PROC_CALL: @@ -389,16 +409,21 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, data->block[0]); return -EINVAL; } + msg[0].len = data->block[0] + 2; + i2c_smbus_try_get_dmabuf(&msg[0], command); for (i = 1; i < msg[0].len; i++) - msgbuf0[i] = data->block[i-1]; + msg[0].buf[i] = data->block[i-1]; + msg[1].flags |= I2C_M_RECV_LEN; msg[1].len = 1; /* block length will be added by the underlying bus driver */ + i2c_smbus_try_get_dmabuf(&msg[1], 0); break; case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; + i2c_smbus_try_get_dmabuf(&msg[1], 0); } else { msg[0].len = data->block[0] + 1; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { @@ -407,8 +432,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, data->block[0]); return -EINVAL; } + + i2c_smbus_try_get_dmabuf(&msg[0], command); for (i = 1; i <= data->block[0]; i++) - msgbuf0[i] = data->block[i]; + msg[0].buf[i] = data->block[i]; } break; default: @@ -456,14 +483,20 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, break; case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < data->block[0]; i++) - data->block[i+1] = msgbuf1[i]; + data->block[i+1] = msg[1].buf[i]; break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: - for (i = 0; i < msgbuf1[0] + 1; i++) - data->block[i] = msgbuf1[i]; + for (i = 0; i < msg[1].buf[0] + 1; i++) + data->block[i] = msg[1].buf[i]; break; } + + if (msg[0].flags & I2C_M_DMA_SAFE) + kfree(msg[0].buf); + if (msg[1].flags & I2C_M_DMA_SAFE) + kfree(msg[1].buf); + return 0; }
For all block commands, try to allocate a DMA safe buffer and mark it accordingly. Only use the stack, if the buffers cannot be allocated. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/i2c-core-smbus.c | 45 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 6 deletions(-)