Message ID | 20171018164957.2270-1-carlo@caione.org (mailing list archive) |
---|---|
State | Accepted |
Commit | 39712db878a499542651eb6c2f5ceec4eacc72d1 |
Headers | show |
On 10/18/17 11:49 AM, Carlo Caione wrote: > From: Carlo Caione <carlo@endlessm.com> > > Introduce a new custom dapm routes map to quirk platforms with the > internal mic connected to IN2P. LGTM. If we start getting more quirks for this codec, we should think of adding a module parameters to select them from the command line or with modprobe (as done in other machine drivers). Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > Signed-off-by: Carlo Caione <carlo@endlessm.com> > --- > sound/soc/intel/boards/bytcr_rt5651.c | 16 +++++++++++++++- > 1 file changed, 15 insertions(+), 1 deletion(-) > > diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c > index 3076bfc0db5e..1dad5c98c9ef 100644 > --- a/sound/soc/intel/boards/bytcr_rt5651.c > +++ b/sound/soc/intel/boards/bytcr_rt5651.c > @@ -37,6 +37,7 @@ > enum { > BYT_RT5651_DMIC_MAP, > BYT_RT5651_IN1_MAP, > + BYT_RT5651_IN2_MAP, > }; > > #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) > @@ -58,6 +59,8 @@ static void log_quirks(struct device *dev) > dev_info(dev, "quirk DMIC_MAP enabled"); > if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) > dev_info(dev, "quirk IN1_MAP enabled"); > + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) > + dev_info(dev, "quirk IN2_MAP enabled"); > if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) > dev_info(dev, "quirk DMIC enabled"); > if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) > @@ -143,7 +146,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { > {"ssp2 Rx", NULL, "AIF1 Capture"}, > > {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ > - {"IN2P", NULL, "Headset Mic"}, > {"Headphone", NULL, "HPOL"}, > {"Headphone", NULL, "HPOR"}, > {"Speaker", NULL, "LOUTL"}, > @@ -151,15 +153,23 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { > }; > > static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { > + {"IN2P", NULL, "Headset Mic"}, > {"DMIC L1", NULL, "Internal Mic"}, > {"DMIC R1", NULL, "Internal Mic"}, > }; > > static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { > {"Internal Mic", NULL, "micbias1"}, > + {"IN2P", NULL, "Headset Mic"}, > {"IN1P", NULL, "Internal Mic"}, > }; > > +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { > + {"Internal Mic", NULL, "micbias1"}, > + {"IN1P", NULL, "Headset Mic"}, > + {"IN2P", NULL, "Internal Mic"}, > +}; > + > static const struct snd_kcontrol_new byt_rt5651_controls[] = { > SOC_DAPM_PIN_SWITCH("Headphone"), > SOC_DAPM_PIN_SWITCH("Headset Mic"), > @@ -246,6 +256,10 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) > custom_map = byt_rt5651_intmic_in1_map; > num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); > break; > + case BYT_RT5651_IN2_MAP: > + custom_map = byt_rt5651_intmic_in2_map; > + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); > + break; > default: > custom_map = byt_rt5651_intmic_dmic_map; > num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); >
On Wed, Oct 18, 2017 at 7:05 PM, Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> wrote: > On 10/18/17 11:49 AM, Carlo Caione wrote: >> >> From: Carlo Caione <carlo@endlessm.com> >> >> Introduce a new custom dapm routes map to quirk platforms with the >> internal mic connected to IN2P. > > > LGTM. If we start getting more quirks for this codec, we should think of > adding a module parameters to select them from the command line or with > modprobe (as done in other machine drivers). Hey Pierre, I'm currently working on a laptop (always with the rt5651 codec) having two separate internal mics (on IN1P and IN2P) and the headset on IN3P. I was thinking how to describe this situation in the current driver without having to add all the 6 different configuration as quirks. Any suggestion? Cheers,
On Thu, Nov 16, 2017 at 1:53 PM, Carlo Caione <carlo@caione.org> wrote: > On Wed, Oct 18, 2017 at 7:05 PM, Pierre-Louis Bossart > <pierre-louis.bossart@linux.intel.com> wrote: >> On 10/18/17 11:49 AM, Carlo Caione wrote: >>> >>> From: Carlo Caione <carlo@endlessm.com> >>> >>> Introduce a new custom dapm routes map to quirk platforms with the >>> internal mic connected to IN2P. >> >> >> LGTM. If we start getting more quirks for this codec, we should think of >> adding a module parameters to select them from the command line or with >> modprobe (as done in other machine drivers). > > Hey Pierre, > I'm currently working on a laptop (always with the rt5651 codec) > having two separate internal mics (on IN1P and IN2P) and the headset > on IN3P. I was thinking how to describe this situation in the current > driver without having to add all the 6 different configuration as > quirks. Any suggestion? gentle ping on this question. cheers,
On 11/21/17 3:30 AM, Carlo Caione wrote: > On Thu, Nov 16, 2017 at 1:53 PM, Carlo Caione <carlo@caione.org> wrote: >> On Wed, Oct 18, 2017 at 7:05 PM, Pierre-Louis Bossart >> <pierre-louis.bossart@linux.intel.com> wrote: >>> On 10/18/17 11:49 AM, Carlo Caione wrote: >>>> >>>> From: Carlo Caione <carlo@endlessm.com> >>>> >>>> Introduce a new custom dapm routes map to quirk platforms with the >>>> internal mic connected to IN2P. >>> >>> >>> LGTM. If we start getting more quirks for this codec, we should think of >>> adding a module parameters to select them from the command line or with >>> modprobe (as done in other machine drivers). >> >> Hey Pierre, >> I'm currently working on a laptop (always with the rt5651 codec) >> having two separate internal mics (on IN1P and IN2P) and the headset >> on IN3P. I was thinking how to describe this situation in the current >> driver without having to add all the 6 different configuration as >> quirks. Any suggestion? The microphone configurations are not handled with a mask but an enum and the BYT_RT5651_MAP() macro. You can just add a new configuration such at BYT_RT5651_IN1_IN2 which uses the analog mics on those two and implicitly use IN3 for the headset. I don't see the point of handling all possible permutations at this point.
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 3076bfc0db5e..1dad5c98c9ef 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -37,6 +37,7 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, }; #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) @@ -58,6 +59,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) dev_info(dev, "quirk DMIC enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) @@ -143,7 +146,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"ssp2 Rx", NULL, "AIF1 Capture"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ - {"IN2P", NULL, "Headset Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, @@ -151,15 +153,23 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { }; static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { + {"IN2P", NULL, "Headset Mic"}, {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Headset Mic"}, {"IN1P", NULL, "Internal Mic"}, }; +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN1P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Internal Mic"}, +}; + static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -246,6 +256,10 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); + break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map);