diff mbox

[v2,2/2] arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3

Message ID 1512363187-8353-2-git-send-email-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jagan Teki Dec. 4, 2017, 4:53 a.m. UTC 
Since current tree support AXP803 regulators,
replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
it need to replace.

Tested mmc0 on sopine baseboard.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Commit message edited as fix since it has issue with sdcard detect.

 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts |  2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi          | 11 +----------
 2 files changed, 2 insertions(+), 11 deletions(-)

Comments

Maxime Ripard Dec. 5, 2017, 8:33 a.m. UTC | #1 
On Mon, Dec 04, 2017 at 10:23:07AM +0530, Jagan Teki wrote:
> Since current tree support AXP803 regulators,
> replace fixed regulator vcc3v3 with AXP803 dcdc1 regulator where ever
> it need to replace.
> 
> Tested mmc0 on sopine baseboard.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Queued as a fix, thanks

Maxime
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index a053a6a..abe179d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -96,7 +96,7 @@ 
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_vcc1v8>;
 	bus-width = <8>;
 	non-removable;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index a5da18a..43418bd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,19 +45,10 @@ 
 
 #include "sun50i-a64.dtsi"
 
-/ {
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&reg_dcdc1>;
 	non-removable;
 	disable-wp;
 	bus-width = <4>;