| Message ID | 20171205123558.31087-2-l.stelmach@samsung.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Herbert Xu |
| Headers | show |
On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: > Add support for PRNG in Exynos5250+ SoCs. > > Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> > --- > .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- > drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- > 2 files changed, 36 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt > index 4ca8dd4d7e66..a13fbdb4bd88 100644 > --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt > +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt > @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator > > Required properties: > > -- compatible : Should be "samsung,exynos4-rng". > +- compatible : One of: > + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 > + - "samsung,exynos5250-prng" for Exynos5250+ > - reg : Specifies base physical address and size of the registers map. > - clocks : Phandle to clock-controller plus clock-specifier pair. > - clock-names : "secss" as a clock name. > diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c > index 451620b475a0..894ef93ef5ec 100644 > --- a/drivers/crypto/exynos-rng.c > +++ b/drivers/crypto/exynos-rng.c > @@ -22,12 +22,17 @@ > #include <linux/err.h> > #include <linux/io.h> > #include <linux/module.h> > +#include <linux/of_device.h> > #include <linux/platform_device.h> > > #include <crypto/internal/rng.h> > > #define EXYNOS_RNG_CONTROL 0x0 > #define EXYNOS_RNG_STATUS 0x10 > + > +#define EXYNOS_RNG_SEED_CONF 0x14 > +#define EXYNOS_RNG_GEN_PRNG 0x02 Use BIT(1) instead. > + > #define EXYNOS_RNG_SEED_BASE 0x140 > #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) > #define EXYNOS_RNG_OUT_BASE 0x160 > @@ -43,6 +48,11 @@ > #define EXYNOS_RNG_SEED_REGS 5 > #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) > > +enum exynos_prng_type { > + EXYNOS_PRNG_TYPE4 = 4, > + EXYNOS_PRNG_TYPE5 = 5, That's unusual numbering and naming, so just: enum exynos_prng_type { EXYNOS_PRNG_EXYNOS4, EXYNOS_PRNG_EXYNOS5, }; Especially that TYPE4 and TYPE5 suggest so kind of sub-type (like versions of some IP blocks, e.g. MFC) but it is just the family of Exynos. > +}; > + > /* > * Driver re-seeds itself with generated random numbers to increase > * the randomness. > @@ -63,6 +73,7 @@ struct exynos_rng_ctx { > /* Device associated memory */ > struct exynos_rng_dev { > struct device *dev; > + enum exynos_prng_type type; > void __iomem *mem; > struct clk *clk; > /* Generated numbers stored for seeding during resume */ > @@ -160,8 +171,13 @@ static int exynos_rng_get_random(struct exynos_rng_dev *rng, > { > int retry = EXYNOS_RNG_WAIT_RETRIES; > > - exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, > - EXYNOS_RNG_CONTROL); > + if (rng->type == EXYNOS_PRNG_TYPE4) { > + exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, > + EXYNOS_RNG_CONTROL); > + } else if (rng->type == EXYNOS_PRNG_TYPE5) { > + exynos_rng_writel(rng, EXYNOS_RNG_GEN_PRNG, > + EXYNOS_RNG_SEED_CONF); > + } > > while (!(exynos_rng_readl(rng, > EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry) > @@ -279,6 +295,13 @@ static int exynos_rng_probe(struct platform_device *pdev) > if (!rng) > return -ENOMEM; > > + rng->type = (enum exynos_prng_type)of_device_get_match_data(&pdev->dev); > + if (rng->type != EXYNOS_PRNG_TYPE4 && > + rng->type != EXYNOS_PRNG_TYPE5) { > + dev_err(&pdev->dev, "Unsupported PRNG type: %d", rng->type); > + return -ENOTSUPP; > + } > + > rng->dev = &pdev->dev; > rng->clk = devm_clk_get(&pdev->dev, "secss"); > if (IS_ERR(rng->clk)) { > @@ -300,7 +323,10 @@ static int exynos_rng_probe(struct platform_device *pdev) > dev_err(&pdev->dev, > "Couldn't register rng crypto alg: %d\n", ret); > exynos_rng_dev = NULL; > - } > + } else Missing {} around else clause. Probably checkpatch should point it. > + dev_info(&pdev->dev, > + "Exynos Pseudo Random Number Generator (type:%d)\n", dev_dbg, this is not that important information to affect the boot time. Best regards, Krzysztof > + rng->type); > > return ret; > } > @@ -367,6 +393,10 @@ static SIMPLE_DEV_PM_OPS(exynos_rng_pm_ops, exynos_rng_suspend, > static const struct of_device_id exynos_rng_dt_match[] = { > { > .compatible = "samsung,exynos4-rng", > + .data = (const void *)EXYNOS_PRNG_TYPE4, > + }, { > + .compatible = "samsung,exynos5250-prng", > + .data = (const void *)EXYNOS_PRNG_TYPE5, > }, > { }, > }; > -- > 2.11.0 >
It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: > On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >> Add support for PRNG in Exynos5250+ SoCs. >> >> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >> --- >> .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- >> drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- >> 2 files changed, 36 insertions(+), 4 deletions(-) >> >> diff --git >> a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >> b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >> index 4ca8dd4d7e66..a13fbdb4bd88 100644 >> --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >> +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >> @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator >> >> Required properties: >> >> -- compatible : Should be "samsung,exynos4-rng". >> +- compatible : One of: >> + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 >> + - "samsung,exynos5250-prng" for Exynos5250+ >> - reg : Specifies base physical address and size of the registers map. >> - clocks : Phandle to clock-controller plus clock-specifier pair. >> - clock-names : "secss" as a clock name. >> diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c >> index 451620b475a0..894ef93ef5ec 100644 >> --- a/drivers/crypto/exynos-rng.c >> +++ b/drivers/crypto/exynos-rng.c >> @@ -22,12 +22,17 @@ >> #include <linux/err.h> >> #include <linux/io.h> >> #include <linux/module.h> >> +#include <linux/of_device.h> >> #include <linux/platform_device.h> >> >> #include <crypto/internal/rng.h> >> >> #define EXYNOS_RNG_CONTROL 0x0 >> #define EXYNOS_RNG_STATUS 0x10 >> + >> +#define EXYNOS_RNG_SEED_CONF 0x14 >> +#define EXYNOS_RNG_GEN_PRNG 0x02 > > Use BIT(1) instead. > >> + >> #define EXYNOS_RNG_SEED_BASE 0x140 >> #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) >> #define EXYNOS_RNG_OUT_BASE 0x160 >> @@ -43,6 +48,11 @@ >> #define EXYNOS_RNG_SEED_REGS 5 >> #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) >> >> +enum exynos_prng_type { >> + EXYNOS_PRNG_TYPE4 = 4, >> + EXYNOS_PRNG_TYPE5 = 5, > > That's unusual numbering and naming, so just: > enum exynos_prng_type { > EXYNOS_PRNG_EXYNOS4, > EXYNOS_PRNG_EXYNOS5, > }; > > Especially that TYPE4 and TYPE5 suggest so kind of sub-type (like > versions of some IP blocks, e.g. MFC) but it is just the family of > Exynos. Half done. I've changed TYPE to EXYNOS. I used explicit numbering in the enum because I want both values to act same true-false-wise. If one is 0 this condition is not met. >> +}; >> + >> /* >> * Driver re-seeds itself with generated random numbers to increase >> * the randomness. >> @@ -63,6 +73,7 @@ struct exynos_rng_ctx { >> /* Device associated memory */ >> struct exynos_rng_dev { >> struct device *dev; >> + enum exynos_prng_type type; >> void __iomem *mem; >> struct clk *clk; >> /* Generated numbers stored for seeding during resume */ >> @@ -160,8 +171,13 @@ static int exynos_rng_get_random(struct exynos_rng_dev *rng, >> { >> int retry = EXYNOS_RNG_WAIT_RETRIES; >> >> - exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, >> - EXYNOS_RNG_CONTROL); >> + if (rng->type == EXYNOS_PRNG_TYPE4) { >> + exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, >> + EXYNOS_RNG_CONTROL); >> + } else if (rng->type == EXYNOS_PRNG_TYPE5) { >> + exynos_rng_writel(rng, EXYNOS_RNG_GEN_PRNG, >> + EXYNOS_RNG_SEED_CONF); >> + } >> >> while (!(exynos_rng_readl(rng, >> EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry) >> @@ -279,6 +295,13 @@ static int exynos_rng_probe(struct platform_device *pdev) >> if (!rng) >> return -ENOMEM; >> >> + rng->type = (enum exynos_prng_type)of_device_get_match_data(&pdev->dev); >> + if (rng->type != EXYNOS_PRNG_TYPE4 && >> + rng->type != EXYNOS_PRNG_TYPE5) { >> + dev_err(&pdev->dev, "Unsupported PRNG type: %d", rng->type); >> + return -ENOTSUPP; >> + } >> + >> rng->dev = &pdev->dev; >> rng->clk = devm_clk_get(&pdev->dev, "secss"); >> if (IS_ERR(rng->clk)) { >> @@ -300,7 +323,10 @@ static int exynos_rng_probe(struct platform_device *pdev) >> dev_err(&pdev->dev, >> "Couldn't register rng crypto alg: %d\n", ret); >> exynos_rng_dev = NULL; >> - } >> + } else > > Missing {} around else clause. Probably checkpatch should point it. It doesn't. Fixed. >> + dev_info(&pdev->dev, >> + "Exynos Pseudo Random Number Generator (type:%d)\n", > > dev_dbg, this is not that important information to affect the boot time. Quite many devices report their presence during boot with such messages. For example: [ 3.390247] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.395493] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.403702] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 [ 3.431793] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 From my experience it isn't printk() itself that slows down boot but the serial console.
On Wed, Dec 6, 2017 at 2:42 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: > It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: >> On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>> Add support for PRNG in Exynos5250+ SoCs. >>> >>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >>> --- >>> .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- >>> drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- >>> 2 files changed, 36 insertions(+), 4 deletions(-) >>> >>> diff --git >>> a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>> b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>> index 4ca8dd4d7e66..a13fbdb4bd88 100644 >>> --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>> +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>> @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator >>> >>> Required properties: >>> >>> -- compatible : Should be "samsung,exynos4-rng". >>> +- compatible : One of: >>> + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 >>> + - "samsung,exynos5250-prng" for Exynos5250+ >>> - reg : Specifies base physical address and size of the registers map. >>> - clocks : Phandle to clock-controller plus clock-specifier pair. >>> - clock-names : "secss" as a clock name. >>> diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c >>> index 451620b475a0..894ef93ef5ec 100644 >>> --- a/drivers/crypto/exynos-rng.c >>> +++ b/drivers/crypto/exynos-rng.c >>> @@ -22,12 +22,17 @@ >>> #include <linux/err.h> >>> #include <linux/io.h> >>> #include <linux/module.h> >>> +#include <linux/of_device.h> >>> #include <linux/platform_device.h> >>> >>> #include <crypto/internal/rng.h> >>> >>> #define EXYNOS_RNG_CONTROL 0x0 >>> #define EXYNOS_RNG_STATUS 0x10 >>> + >>> +#define EXYNOS_RNG_SEED_CONF 0x14 >>> +#define EXYNOS_RNG_GEN_PRNG 0x02 >> >> Use BIT(1) instead. >> >>> + >>> #define EXYNOS_RNG_SEED_BASE 0x140 >>> #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) >>> #define EXYNOS_RNG_OUT_BASE 0x160 >>> @@ -43,6 +48,11 @@ >>> #define EXYNOS_RNG_SEED_REGS 5 >>> #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) >>> >>> +enum exynos_prng_type { >>> + EXYNOS_PRNG_TYPE4 = 4, >>> + EXYNOS_PRNG_TYPE5 = 5, >> >> That's unusual numbering and naming, so just: >> enum exynos_prng_type { >> EXYNOS_PRNG_EXYNOS4, >> EXYNOS_PRNG_EXYNOS5, >> }; >> >> Especially that TYPE4 and TYPE5 suggest so kind of sub-type (like >> versions of some IP blocks, e.g. MFC) but it is just the family of >> Exynos. > > Half done. I've changed TYPE to EXYNOS. > > I used explicit numbering in the enum because I want both values to act > same true-false-wise. If one is 0 this condition is not met. First of all - that condition cannot happen. It is not possible from the device-matching code. But if you want to indicate it explicitly (for code reviewing?) then how about: enum exynos_prng_type { EXYNOS_PRNG_UNKNOWN = 0, EXYNOS_PRNG_EXYNOS4, EXYNOS_PRNG_EXYNOS5, }; In such case you have the same effect but your intentions are clear (you expect possibility of =0... which is not possible :) ). >>> +}; >>> + >>> /* >>> * Driver re-seeds itself with generated random numbers to increase >>> * the randomness. >>> @@ -63,6 +73,7 @@ struct exynos_rng_ctx { >>> /* Device associated memory */ >>> struct exynos_rng_dev { >>> struct device *dev; >>> + enum exynos_prng_type type; >>> void __iomem *mem; >>> struct clk *clk; >>> /* Generated numbers stored for seeding during resume */ >>> @@ -160,8 +171,13 @@ static int exynos_rng_get_random(struct exynos_rng_dev *rng, >>> { >>> int retry = EXYNOS_RNG_WAIT_RETRIES; >>> >>> - exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, >>> - EXYNOS_RNG_CONTROL); >>> + if (rng->type == EXYNOS_PRNG_TYPE4) { >>> + exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, >>> + EXYNOS_RNG_CONTROL); >>> + } else if (rng->type == EXYNOS_PRNG_TYPE5) { >>> + exynos_rng_writel(rng, EXYNOS_RNG_GEN_PRNG, >>> + EXYNOS_RNG_SEED_CONF); >>> + } >>> >>> while (!(exynos_rng_readl(rng, >>> EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry) >>> @@ -279,6 +295,13 @@ static int exynos_rng_probe(struct platform_device *pdev) >>> if (!rng) >>> return -ENOMEM; >>> >>> + rng->type = (enum exynos_prng_type)of_device_get_match_data(&pdev->dev); >>> + if (rng->type != EXYNOS_PRNG_TYPE4 && >>> + rng->type != EXYNOS_PRNG_TYPE5) { >>> + dev_err(&pdev->dev, "Unsupported PRNG type: %d", rng->type); >>> + return -ENOTSUPP; >>> + } >>> + >>> rng->dev = &pdev->dev; >>> rng->clk = devm_clk_get(&pdev->dev, "secss"); >>> if (IS_ERR(rng->clk)) { >>> @@ -300,7 +323,10 @@ static int exynos_rng_probe(struct platform_device *pdev) >>> dev_err(&pdev->dev, >>> "Couldn't register rng crypto alg: %d\n", ret); >>> exynos_rng_dev = NULL; >>> - } >>> + } else >> >> Missing {} around else clause. Probably checkpatch should point it. > > It doesn't. Fixed. > >>> + dev_info(&pdev->dev, >>> + "Exynos Pseudo Random Number Generator (type:%d)\n", >> >> dev_dbg, this is not that important information to affect the boot time. > > Quite many devices report their presence during boot with such > messages. For example: > > [ 3.390247] exynos-ehci 12110000.usb: EHCI Host Controller > [ 3.395493] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 > [ 3.403702] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 > [ 3.431793] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 > > From my experience it isn't printk() itself that slows down boot but the > serial console. True, the console is bottleneck (not necessarily serial) [1] but that does not change the fact there is no need to print the type of RNG. Before the device was not printing its presence and by adding support for different flavor, you are adding the printk (not changing existing printk). This driver is not that special to inform about flavor being used especially that it is obvious from Exynos type (which comes from board compatible). The example above prints resources so it brings some information (not that useful but that is other point)... Really, if every our driver started to inform how important he is, then the info-level log would be polluted with a lot of useless printks. With exynos-bus and exynos-nocp/event you can already find ridiculous amount of useless messages. [1] https://lwn.net/Articles/737822/ Best regards, Krzysztof
It was <2017-12-06 śro 15:05>, when Krzysztof Kozlowski wrote: > On Wed, Dec 6, 2017 at 2:42 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >> It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: >>> On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>>> Add support for PRNG in Exynos5250+ SoCs. >>>> >>>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >>>> --- >>>> .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- >>>> drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- >>>> 2 files changed, 36 insertions(+), 4 deletions(-) >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>> b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>> index 4ca8dd4d7e66..a13fbdb4bd88 100644 >>>> --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>> +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>> @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator >>>> >>>> Required properties: >>>> >>>> -- compatible : Should be "samsung,exynos4-rng". >>>> +- compatible : One of: >>>> + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 >>>> + - "samsung,exynos5250-prng" for Exynos5250+ >>>> - reg : Specifies base physical address and size of the registers map. >>>> - clocks : Phandle to clock-controller plus clock-specifier pair. >>>> - clock-names : "secss" as a clock name. >>>> diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c >>>> index 451620b475a0..894ef93ef5ec 100644 >>>> --- a/drivers/crypto/exynos-rng.c >>>> +++ b/drivers/crypto/exynos-rng.c >>>> @@ -22,12 +22,17 @@ >>>> #include <linux/err.h> >>>> #include <linux/io.h> >>>> #include <linux/module.h> >>>> +#include <linux/of_device.h> >>>> #include <linux/platform_device.h> >>>> >>>> #include <crypto/internal/rng.h> >>>> >>>> #define EXYNOS_RNG_CONTROL 0x0 >>>> #define EXYNOS_RNG_STATUS 0x10 >>>> + >>>> +#define EXYNOS_RNG_SEED_CONF 0x14 >>>> +#define EXYNOS_RNG_GEN_PRNG 0x02 >>> >>> Use BIT(1) instead. Done. >>>> + >>>> #define EXYNOS_RNG_SEED_BASE 0x140 >>>> #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) >>>> #define EXYNOS_RNG_OUT_BASE 0x160 >>>> @@ -43,6 +48,11 @@ >>>> #define EXYNOS_RNG_SEED_REGS 5 >>>> #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) >>>> >>>> +enum exynos_prng_type { >>>> + EXYNOS_PRNG_TYPE4 = 4, >>>> + EXYNOS_PRNG_TYPE5 = 5, >>> >>> That's unusual numbering and naming, so just: >>> enum exynos_prng_type { >>> EXYNOS_PRNG_EXYNOS4, >>> EXYNOS_PRNG_EXYNOS5, >>> }; >>> >>> Especially that TYPE4 and TYPE5 suggest so kind of sub-type (like >>> versions of some IP blocks, e.g. MFC) but it is just the family of >>> Exynos. >> >> Half done. I've changed TYPE to EXYNOS. >> >> I used explicit numbering in the enum because I want both values to act >> same true-false-wise. If one is 0 this condition is not met. > > First of all - that condition cannot happen. It is not possible from > the device-matching code. Let me explain what I didn't want. With the enum: enum exynos_prng_type { EXYNOS_PRNG_EXYNOS4, EXYNOS_PRNG_EXYNOS5, }; and a code like this if (rng->type) { } EXYNOS_PRNG_EXYNOS4 is identical to false while EXYNOS_PRNG_EXYNPOS5 evaluates as true. I think this is a bad idea. I don't want it ever to happen. Because chips have their own numbers I thought using those numbers would be OK. > But if you want to indicate it explicitly > (for code reviewing?) then how about: > enum exynos_prng_type { > EXYNOS_PRNG_UNKNOWN = 0, > EXYNOS_PRNG_EXYNOS4, > EXYNOS_PRNG_EXYNOS5, > }; > > In such case you have the same effect but your intentions are clear > (you expect possibility of =0... which is not possible :) ). Fair enough. >>>> + dev_info(&pdev->dev, >>>> + "Exynos Pseudo Random Number Generator (type:%d)\n", >>> >>> dev_dbg, this is not that important information to affect the boot time. >> >> Quite many devices report their presence during boot with such >> messages. For example: >> >> [ 3.390247] exynos-ehci 12110000.usb: EHCI Host Controller >> [ 3.395493] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 >> [ 3.403702] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 >> [ 3.431793] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 >> >> From my experience it isn't printk() itself that slows down boot but the >> serial console. > > True, the console is bottleneck (not necessarily serial) [1] but that > does not change the fact there is no need to print the type of RNG. With values of the enum not being meaningful themselves printing the type does not make much sense for me too. Is it ok just to print report the device presence?
On Wed, Dec 6, 2017 at 3:53 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: > It was <2017-12-06 śro 15:05>, when Krzysztof Kozlowski wrote: >> On Wed, Dec 6, 2017 at 2:42 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>> It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: >>>> On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>>>> Add support for PRNG in Exynos5250+ SoCs. >>>>> >>>>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >>>>> --- >>>>> .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- >>>>> drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- >>>>> 2 files changed, 36 insertions(+), 4 deletions(-) >>>>> >>>>> diff --git >>>>> a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>>> b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>>> index 4ca8dd4d7e66..a13fbdb4bd88 100644 >>>>> --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>>> +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt >>>>> @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator >>>>> >>>>> Required properties: >>>>> >>>>> -- compatible : Should be "samsung,exynos4-rng". >>>>> +- compatible : One of: >>>>> + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 >>>>> + - "samsung,exynos5250-prng" for Exynos5250+ >>>>> - reg : Specifies base physical address and size of the registers map. >>>>> - clocks : Phandle to clock-controller plus clock-specifier pair. >>>>> - clock-names : "secss" as a clock name. >>>>> diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c >>>>> index 451620b475a0..894ef93ef5ec 100644 >>>>> --- a/drivers/crypto/exynos-rng.c >>>>> +++ b/drivers/crypto/exynos-rng.c >>>>> @@ -22,12 +22,17 @@ >>>>> #include <linux/err.h> >>>>> #include <linux/io.h> >>>>> #include <linux/module.h> >>>>> +#include <linux/of_device.h> >>>>> #include <linux/platform_device.h> >>>>> >>>>> #include <crypto/internal/rng.h> >>>>> >>>>> #define EXYNOS_RNG_CONTROL 0x0 >>>>> #define EXYNOS_RNG_STATUS 0x10 >>>>> + >>>>> +#define EXYNOS_RNG_SEED_CONF 0x14 >>>>> +#define EXYNOS_RNG_GEN_PRNG 0x02 >>>> >>>> Use BIT(1) instead. > > Done. > >>>>> + >>>>> #define EXYNOS_RNG_SEED_BASE 0x140 >>>>> #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) >>>>> #define EXYNOS_RNG_OUT_BASE 0x160 >>>>> @@ -43,6 +48,11 @@ >>>>> #define EXYNOS_RNG_SEED_REGS 5 >>>>> #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) >>>>> >>>>> +enum exynos_prng_type { >>>>> + EXYNOS_PRNG_TYPE4 = 4, >>>>> + EXYNOS_PRNG_TYPE5 = 5, >>>> >>>> That's unusual numbering and naming, so just: >>>> enum exynos_prng_type { >>>> EXYNOS_PRNG_EXYNOS4, >>>> EXYNOS_PRNG_EXYNOS5, >>>> }; >>>> >>>> Especially that TYPE4 and TYPE5 suggest so kind of sub-type (like >>>> versions of some IP blocks, e.g. MFC) but it is just the family of >>>> Exynos. >>> >>> Half done. I've changed TYPE to EXYNOS. >>> >>> I used explicit numbering in the enum because I want both values to act >>> same true-false-wise. If one is 0 this condition is not met. >> >> First of all - that condition cannot happen. It is not possible from >> the device-matching code. > > Let me explain what I didn't want. With the enum: > > enum exynos_prng_type { > EXYNOS_PRNG_EXYNOS4, > EXYNOS_PRNG_EXYNOS5, > }; > > and a code like this > > if (rng->type) { > > } > > EXYNOS_PRNG_EXYNOS4 is identical to false while EXYNOS_PRNG_EXYNPOS5 > evaluates as true. I think this is a bad idea. I don't want it ever to > happen. > Because chips have their own numbers I thought using those > numbers would be OK. It does not scale because we do not know what chips could be added... and we might for example discover minor differences between 4210 and 4412 so you would have: EXYNOS4 = 4 EXYNOS4412 = 5 EXYNOS5 = 6 or some other combinations confusing the reader in the future. Instead just do not open-code the numbers because you do not need them (I mean you do not need the exact values). > >> But if you want to indicate it explicitly >> (for code reviewing?) then how about: >> enum exynos_prng_type { >> EXYNOS_PRNG_UNKNOWN = 0, >> EXYNOS_PRNG_EXYNOS4, >> EXYNOS_PRNG_EXYNOS5, >> }; >> >> In such case you have the same effect but your intentions are clear >> (you expect possibility of =0... which is not possible :) ). > > Fair enough. Great! > >>>>> + dev_info(&pdev->dev, >>>>> + "Exynos Pseudo Random Number Generator (type:%d)\n", >>>> >>>> dev_dbg, this is not that important information to affect the boot time. >>> >>> Quite many devices report their presence during boot with such >>> messages. For example: >>> >>> [ 3.390247] exynos-ehci 12110000.usb: EHCI Host Controller >>> [ 3.395493] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 >>> [ 3.403702] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 >>> [ 3.431793] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 >>> >>> From my experience it isn't printk() itself that slows down boot but the >>> serial console. >> >> True, the console is bottleneck (not necessarily serial) [1] but that >> does not change the fact there is no need to print the type of RNG. > > With values of the enum not being meaningful themselves printing the > type does not make much sense for me too. Is it ok just to print report > the device presence? This does not change mine arguments - this printk does not bring any information except that there is such device. Later you might want to print this for Exynos TRNG. Later for other module, and other. Thus I prefer not to add it. On the other hand that is not a reason to stop this patch so for example you could split it into separate commit. It is kind of unrelated change and keeping it separate will not block everything if maintainer will not want it. Besr regards, Krzysztof
On Wed, 2017-12-06 at 15:05 +0100, Krzysztof Kozlowski wrote: > On Wed, Dec 6, 2017 at 2:42 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: > > It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: > > > On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: > > > > Add support for PRNG in Exynos5250+ SoCs. [] > > > > diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c [] > > > > @@ -300,7 +323,10 @@ static int exynos_rng_probe(struct platform_device *pdev) > > > > dev_err(&pdev->dev, > > > > "Couldn't register rng crypto alg: %d\n", ret); > > > > exynos_rng_dev = NULL; > > > > - } > > > > + } else > > > > > > Missing {} around else clause. Probably checkpatch should point it. > > > > It doesn't. Fixed. checkpatch does report this if using --strict $ ./scripts/checkpatch.pl --strict - CHECK: Unbalanced braces around else statement #119: FILE: drivers/crypto/exynos-rng.c:326: + } else Arguably, this should always be reported.
It was <2017-12-06 śro 16:28>, when Krzysztof Kozlowski wrote: > On Wed, Dec 6, 2017 at 3:53 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >> It was <2017-12-06 śro 15:05>, when Krzysztof Kozlowski wrote: >>> On Wed, Dec 6, 2017 at 2:42 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>>> It was <2017-12-05 wto 14:34>, when Krzysztof Kozlowski wrote: >>>>> On Tue, Dec 5, 2017 at 1:35 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote: >>>>>> Add support for PRNG in Exynos5250+ SoCs. >>>>>> >>>>>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> >>>>>> --- [...] >>>>>> + dev_info(&pdev->dev, >>>>>> + "Exynos Pseudo Random Number Generator (type:%d)\n", >>>>> >>>>> dev_dbg, this is not that important information to affect the boot time. >>>> >>>> Quite many devices report their presence during boot with such >>>> messages. For example: >>>> >>>> [ 3.390247] exynos-ehci 12110000.usb: EHCI Host Controller >>>> [ 3.395493] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 >>>> [ 3.403702] exynos-ehci 12110000.usb: irq 80, io mem 0x12110000 >>>> [ 3.431793] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 >>>> >>>> From my experience it isn't printk() itself that slows down boot but the >>>> serial console. >>> >>> True, the console is bottleneck (not necessarily serial) [1] but that >>> does not change the fact there is no need to print the type of RNG. >> >> With values of the enum not being meaningful themselves printing the >> type does not make much sense for me too. Is it ok just to print report >> the device presence? > > This does not change mine arguments - this printk does not bring any > information except that there is such device. Later you might want to > print this for Exynos TRNG. Later for other module, and other. Thus I > prefer not to add it. On the other hand that is not a reason to stop > this patch so for example you could split it into separate commit. Done. > It is kind of unrelated change and keeping it separate will not block > everything if maintainer will not want it. I will. As a user a prefer when devices report their presence in the log buffer and I will submit such patch.
diff --git a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt index 4ca8dd4d7e66..a13fbdb4bd88 100644 --- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator Required properties: -- compatible : Should be "samsung,exynos4-rng". +- compatible : One of: + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 + - "samsung,exynos5250-prng" for Exynos5250+ - reg : Specifies base physical address and size of the registers map. - clocks : Phandle to clock-controller plus clock-specifier pair. - clock-names : "secss" as a clock name. diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c index 451620b475a0..894ef93ef5ec 100644 --- a/drivers/crypto/exynos-rng.c +++ b/drivers/crypto/exynos-rng.c @@ -22,12 +22,17 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <crypto/internal/rng.h> #define EXYNOS_RNG_CONTROL 0x0 #define EXYNOS_RNG_STATUS 0x10 + +#define EXYNOS_RNG_SEED_CONF 0x14 +#define EXYNOS_RNG_GEN_PRNG 0x02 + #define EXYNOS_RNG_SEED_BASE 0x140 #define EXYNOS_RNG_SEED(n) (EXYNOS_RNG_SEED_BASE + (n * 0x4)) #define EXYNOS_RNG_OUT_BASE 0x160 @@ -43,6 +48,11 @@ #define EXYNOS_RNG_SEED_REGS 5 #define EXYNOS_RNG_SEED_SIZE (EXYNOS_RNG_SEED_REGS * 4) +enum exynos_prng_type { + EXYNOS_PRNG_TYPE4 = 4, + EXYNOS_PRNG_TYPE5 = 5, +}; + /* * Driver re-seeds itself with generated random numbers to increase * the randomness. @@ -63,6 +73,7 @@ struct exynos_rng_ctx { /* Device associated memory */ struct exynos_rng_dev { struct device *dev; + enum exynos_prng_type type; void __iomem *mem; struct clk *clk; /* Generated numbers stored for seeding during resume */ @@ -160,8 +171,13 @@ static int exynos_rng_get_random(struct exynos_rng_dev *rng, { int retry = EXYNOS_RNG_WAIT_RETRIES; - exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, - EXYNOS_RNG_CONTROL); + if (rng->type == EXYNOS_PRNG_TYPE4) { + exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START, + EXYNOS_RNG_CONTROL); + } else if (rng->type == EXYNOS_PRNG_TYPE5) { + exynos_rng_writel(rng, EXYNOS_RNG_GEN_PRNG, + EXYNOS_RNG_SEED_CONF); + } while (!(exynos_rng_readl(rng, EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry) @@ -279,6 +295,13 @@ static int exynos_rng_probe(struct platform_device *pdev) if (!rng) return -ENOMEM; + rng->type = (enum exynos_prng_type)of_device_get_match_data(&pdev->dev); + if (rng->type != EXYNOS_PRNG_TYPE4 && + rng->type != EXYNOS_PRNG_TYPE5) { + dev_err(&pdev->dev, "Unsupported PRNG type: %d", rng->type); + return -ENOTSUPP; + } + rng->dev = &pdev->dev; rng->clk = devm_clk_get(&pdev->dev, "secss"); if (IS_ERR(rng->clk)) { @@ -300,7 +323,10 @@ static int exynos_rng_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Couldn't register rng crypto alg: %d\n", ret); exynos_rng_dev = NULL; - } + } else + dev_info(&pdev->dev, + "Exynos Pseudo Random Number Generator (type:%d)\n", + rng->type); return ret; } @@ -367,6 +393,10 @@ static SIMPLE_DEV_PM_OPS(exynos_rng_pm_ops, exynos_rng_suspend, static const struct of_device_id exynos_rng_dt_match[] = { { .compatible = "samsung,exynos4-rng", + .data = (const void *)EXYNOS_PRNG_TYPE4, + }, { + .compatible = "samsung,exynos5250-prng", + .data = (const void *)EXYNOS_PRNG_TYPE5, }, { }, };
Add support for PRNG in Exynos5250+ SoCs. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> --- .../bindings/crypto/samsung,exynos-rng4.txt | 4 ++- drivers/crypto/exynos-rng.c | 36 ++++++++++++++++++++-- 2 files changed, 36 insertions(+), 4 deletions(-)