diff mbox

[3/8] mfd: axp20x: probe axp20x_adc driver for AXP813

Message ID 302c93023d8c4a54cafe321d912df484e39727b7.1512396054.git-series.quentin.schulz@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Quentin Schulz Dec. 4, 2017, 2:12 p.m. UTC
This makes the axp20x_adc driver probe with platform device id
"axp813-adc".

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
 drivers/mfd/axp20x.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Maxime Ripard Dec. 5, 2017, 8:08 a.m. UTC | #1
On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:
> This makes the axp20x_adc driver probe with platform device id
> "axp813-adc".
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> ---
>  drivers/mfd/axp20x.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 2468b43..42e54d1 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
>  		.resources		= axp803_pek_resources,
>  	}, {
>  		.name			= "axp20x-regulator",
> -	}
> +	}, {
> +		.name			= "axp813-adc",
> +	},

Any particular reason you're not adding it to the DT?

Thanks!
Maxime
Quentin Schulz Dec. 7, 2017, 8:51 a.m. UTC | #2
Hi Maxime,

On 05/12/2017 09:08, Maxime Ripard wrote:
> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:
>> This makes the axp20x_adc driver probe with platform device id
>> "axp813-adc".
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>> ---
>>  drivers/mfd/axp20x.c | 4 +++-
>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index 2468b43..42e54d1 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
>>  		.resources		= axp803_pek_resources,
>>  	}, {
>>  		.name			= "axp20x-regulator",
>> -	}
>> +	}, {
>> +		.name			= "axp813-adc",
>> +	},
> 
> Any particular reason you're not adding it to the DT?
> 

No, no particular reason. It's just the way it is currently for AXP209
and AXP22x so did the same for AXP813.

I'll add DT "support" in next version for all AXPs supported by this
driver. Or is it worthy of a small separate patch series?

Thanks,
Quentin
Chen-Yu Tsai Dec. 7, 2017, 8:54 a.m. UTC | #3
On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz
<quentin.schulz@free-electrons.com> wrote:
> Hi Maxime,
>
> On 05/12/2017 09:08, Maxime Ripard wrote:
>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:
>>> This makes the axp20x_adc driver probe with platform device id
>>> "axp813-adc".
>>>
>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>>> ---
>>>  drivers/mfd/axp20x.c | 4 +++-
>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>>> index 2468b43..42e54d1 100644
>>> --- a/drivers/mfd/axp20x.c
>>> +++ b/drivers/mfd/axp20x.c
>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
>>>              .resources              = axp803_pek_resources,
>>>      }, {
>>>              .name                   = "axp20x-regulator",
>>> -    }
>>> +    }, {
>>> +            .name                   = "axp813-adc",
>>> +    },
>>
>> Any particular reason you're not adding it to the DT?
>>
>
> No, no particular reason. It's just the way it is currently for AXP209
> and AXP22x so did the same for AXP813.
>
> I'll add DT "support" in next version for all AXPs supported by this
> driver. Or is it worthy of a small separate patch series?

IIRC there's no DT support because there's no need to reference
it in the device tree.

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Quentin Schulz Dec. 7, 2017, 9:03 a.m. UTC | #4
Hi Chen-Yu,

On 07/12/2017 09:54, Chen-Yu Tsai wrote:
> On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz
> <quentin.schulz@free-electrons.com> wrote:
>> Hi Maxime,
>>
>> On 05/12/2017 09:08, Maxime Ripard wrote:
>>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:
>>>> This makes the axp20x_adc driver probe with platform device id
>>>> "axp813-adc".
>>>>
>>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>>>> ---
>>>>  drivers/mfd/axp20x.c | 4 +++-
>>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>>>> index 2468b43..42e54d1 100644
>>>> --- a/drivers/mfd/axp20x.c
>>>> +++ b/drivers/mfd/axp20x.c
>>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
>>>>              .resources              = axp803_pek_resources,
>>>>      }, {
>>>>              .name                   = "axp20x-regulator",
>>>> -    }
>>>> +    }, {
>>>> +            .name                   = "axp813-adc",
>>>> +    },
>>>
>>> Any particular reason you're not adding it to the DT?
>>>
>>
>> No, no particular reason. It's just the way it is currently for AXP209
>> and AXP22x so did the same for AXP813.
>>
>> I'll add DT "support" in next version for all AXPs supported by this
>> driver. Or is it worthy of a small separate patch series?
> 
> IIRC there's no DT support because there's no need to reference
> it in the device tree.
> 

No current need but that does not mean there won't be a need later for
drivers to map IIO channels from the ADC driver (i.e. some components
wired to GPIOs of the PMIC for example).

Quentin
Chen-Yu Tsai Dec. 7, 2017, 9:14 a.m. UTC | #5
On Thu, Dec 7, 2017 at 5:03 PM, Quentin Schulz
<quentin.schulz@free-electrons.com> wrote:
> Hi Chen-Yu,
>
> On 07/12/2017 09:54, Chen-Yu Tsai wrote:
>> On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz
>> <quentin.schulz@free-electrons.com> wrote:
>>> Hi Maxime,
>>>
>>> On 05/12/2017 09:08, Maxime Ripard wrote:
>>>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:
>>>>> This makes the axp20x_adc driver probe with platform device id
>>>>> "axp813-adc".
>>>>>
>>>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
>>>>> ---
>>>>>  drivers/mfd/axp20x.c | 4 +++-
>>>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>>>>> index 2468b43..42e54d1 100644
>>>>> --- a/drivers/mfd/axp20x.c
>>>>> +++ b/drivers/mfd/axp20x.c
>>>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
>>>>>              .resources              = axp803_pek_resources,
>>>>>      }, {
>>>>>              .name                   = "axp20x-regulator",
>>>>> -    }
>>>>> +    }, {
>>>>> +            .name                   = "axp813-adc",
>>>>> +    },
>>>>
>>>> Any particular reason you're not adding it to the DT?
>>>>
>>>
>>> No, no particular reason. It's just the way it is currently for AXP209
>>> and AXP22x so did the same for AXP813.
>>>
>>> I'll add DT "support" in next version for all AXPs supported by this
>>> driver. Or is it worthy of a small separate patch series?
>>
>> IIRC there's no DT support because there's no need to reference
>> it in the device tree.
>>
>
> No current need but that does not mean there won't be a need later for
> drivers to map IIO channels from the ADC driver (i.e. some components
> wired to GPIOs of the PMIC for example).

Hmm... Why would you map the IIO channels from the ADC? I thought those
were all accessible from userspace?

However, proper muxing of the GPIO pin to the ADC function makes sense.

ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Dec. 10, 2017, 4:40 p.m. UTC | #6
On Thu, 7 Dec 2017 17:14:30 +0800
Chen-Yu Tsai <wens@csie.org> wrote:

> On Thu, Dec 7, 2017 at 5:03 PM, Quentin Schulz
> <quentin.schulz@free-electrons.com> wrote:
> > Hi Chen-Yu,
> >
> > On 07/12/2017 09:54, Chen-Yu Tsai wrote:  
> >> On Thu, Dec 7, 2017 at 4:51 PM, Quentin Schulz
> >> <quentin.schulz@free-electrons.com> wrote:  
> >>> Hi Maxime,
> >>>
> >>> On 05/12/2017 09:08, Maxime Ripard wrote:  
> >>>> On Mon, Dec 04, 2017 at 03:12:49PM +0100, Quentin Schulz wrote:  
> >>>>> This makes the axp20x_adc driver probe with platform device id
> >>>>> "axp813-adc".
> >>>>>
> >>>>> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> >>>>> ---
> >>>>>  drivers/mfd/axp20x.c | 4 +++-
> >>>>>  1 file changed, 3 insertions(+), 1 deletion(-)
> >>>>>
> >>>>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> >>>>> index 2468b43..42e54d1 100644
> >>>>> --- a/drivers/mfd/axp20x.c
> >>>>> +++ b/drivers/mfd/axp20x.c
> >>>>> @@ -878,7 +878,9 @@ static struct mfd_cell axp813_cells[] = {
> >>>>>              .resources              = axp803_pek_resources,
> >>>>>      }, {
> >>>>>              .name                   = "axp20x-regulator",
> >>>>> -    }
> >>>>> +    }, {
> >>>>> +            .name                   = "axp813-adc",
> >>>>> +    },  
> >>>>
> >>>> Any particular reason you're not adding it to the DT?
> >>>>  
> >>>
> >>> No, no particular reason. It's just the way it is currently for AXP209
> >>> and AXP22x so did the same for AXP813.
> >>>
> >>> I'll add DT "support" in next version for all AXPs supported by this
> >>> driver. Or is it worthy of a small separate patch series?  
> >>
> >> IIRC there's no DT support because there's no need to reference
> >> it in the device tree.
> >>  
> >
> > No current need but that does not mean there won't be a need later for
> > drivers to map IIO channels from the ADC driver (i.e. some components
> > wired to GPIOs of the PMIC for example).  
> 
> Hmm... Why would you map the IIO channels from the ADC? I thought those
> were all accessible from userspace?

There is a reasonably fully featured consumer interface for IIO channels
as well. Here it's being used internal to the hardware, but yes if
you want to do the mappings to other devices, it will need to 'exist'
in the device tree.

I'm guessing that you have something in mind that needs this.  If not I'd
leave it until there is a real user.

> 
> However, proper muxing of the GPIO pin to the ADC function makes sense.
> 
Agreed.

Jonathan

> ChenYu
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 2468b43..42e54d1 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -878,7 +878,9 @@  static struct mfd_cell axp813_cells[] = {
 		.resources		= axp803_pek_resources,
 	}, {
 		.name			= "axp20x-regulator",
-	}
+	}, {
+		.name			= "axp813-adc",
+	},
 };
 
 static struct axp20x_dev *axp20x_pm_power_off;