| Message ID | 1513081897-31612-2-git-send-email-ilialin@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi, On Tue, Dec 12, 2017 at 02:31:28PM +0200, Ilia Lin wrote: > The driver provides kernel level API for other drivers > to access the MSM8996 L2 cache registers. > Separating the L2 access code from the PMU driver and > making it public to allow other drivers use it. > The accesses must be separated with a single spinlock, > maintained in this driver. > -static void set_l2_indirect_reg(u64 reg, u64 val) > -{ > - unsigned long flags; > - > - raw_spin_lock_irqsave(&l2_access_lock, flags); > - write_sysreg_s(reg, L2CPUSRSELR_EL1); > - isb(); > - write_sysreg_s(val, L2CPUSRDR_EL1); > - isb(); > - raw_spin_unlock_irqrestore(&l2_access_lock, flags); > -} > +/** > + * set_l2_indirect_reg: write value to an L2 register > + * @reg: Address of L2 register. > + * @value: Value to be written to register. > + * > + * Use architecturally required barriers for ordering between system register > + * accesses, and system registers with respect to device memory > + */ > +void set_l2_indirect_reg(u64 reg, u64 val) > +{ > + unsigned long flags; > + mb(); We didn't need this for the PMU driver, so it's unfortuante that it now has to pay the cost. Can we please factor this mb() into the callers that need it? > + raw_spin_lock_irqsave(&l2_access_lock, flags); > + write_sysreg_s(reg, L2CPUSRSELR_EL1); > + isb(); > + write_sysreg_s(val, L2CPUSRDR_EL1); > + isb(); > + raw_spin_unlock_irqrestore(&l2_access_lock, flags); > +} > +EXPORT_SYMBOL(set_l2_indirect_reg); [...] > +#ifdef CONFIG_ARCH_QCOM > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > +u64 get_l2_indirect_reg(u64 reg_addr); > +#else > +static inline void set_l2_indirect_reg(u32 reg_addr, u32 val) {} > +static inline u32 get_l2_indirect_reg(u32 reg_addr) > +{ > + return 0; > +} > +#endif > +#endif Are there any drivers that will bne built for !CONFIG_ARCH_QCOM that reference this? It might be better to not have the stub versions, so that we get a build-error if they are erroneously used. Thannks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/12, Mark Rutland wrote: > On Tue, Dec 12, 2017 at 02:31:28PM +0200, Ilia Lin wrote: > > + * accesses, and system registers with respect to device memory > > + */ > > +void set_l2_indirect_reg(u64 reg, u64 val) > > +{ > > + unsigned long flags; > > + mb(); > > We didn't need this for the PMU driver, so it's unfortuante that it now > has to pay the cost. > > Can we please factor this mb() into the callers that need it? +1 > > > + raw_spin_lock_irqsave(&l2_access_lock, flags); > > + write_sysreg_s(reg, L2CPUSRSELR_EL1); > > + isb(); > > + write_sysreg_s(val, L2CPUSRDR_EL1); > > + isb(); > > + raw_spin_unlock_irqrestore(&l2_access_lock, flags); > > +} > > +EXPORT_SYMBOL(set_l2_indirect_reg); > > [...] > > > +#ifdef CONFIG_ARCH_QCOM > > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > > +u64 get_l2_indirect_reg(u64 reg_addr); > > +#else > > +static inline void set_l2_indirect_reg(u32 reg_addr, u32 val) {} > > +static inline u32 get_l2_indirect_reg(u32 reg_addr) > > +{ > > + return 0; > > +} > > +#endif > > +#endif > > Are there any drivers that will bne built for !CONFIG_ARCH_QCOM that > reference this? > > It might be better to not have the stub versions, so that we get a > build-error if they are erroneously used. > Does that approach make COMPILE_TEST break?
This is address in the V2: https://patchwork.kernel.org/patch/10144473/ > -----Original Message----- > From: Mark Rutland [mailto:mark.rutland@arm.com] > Sent: Tuesday, December 12, 2017 4:03 PM > To: Ilia Lin <ilialin@codeaurora.org> > Cc: linux-clk@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > arm-msm@vger.kernel.org; sboyd@codeaurora.org; > devicetree@vger.kernel.org; will.deacon@arm.com; > rnayak@codeaurora.org; qualcomm-lt@lists.linaro.org; > celster@codeaurora.org; tfinkel@codeaurora.org > Subject: Re: [PATCH 01/10] soc: qcom: Separate kryo l2 accessors from PMU > driver > > Hi, > > On Tue, Dec 12, 2017 at 02:31:28PM +0200, Ilia Lin wrote: > > The driver provides kernel level API for other drivers to access the > > MSM8996 L2 cache registers. > > Separating the L2 access code from the PMU driver and making it public > > to allow other drivers use it. > > The accesses must be separated with a single spinlock, maintained in > > this driver. > > > -static void set_l2_indirect_reg(u64 reg, u64 val) -{ > > - unsigned long flags; > > - > > - raw_spin_lock_irqsave(&l2_access_lock, flags); > > - write_sysreg_s(reg, L2CPUSRSELR_EL1); > > - isb(); > > - write_sysreg_s(val, L2CPUSRDR_EL1); > > - isb(); > > - raw_spin_unlock_irqrestore(&l2_access_lock, flags); > > -} > > > +/** > > + * set_l2_indirect_reg: write value to an L2 register > > + * @reg: Address of L2 register. > > + * @value: Value to be written to register. > > + * > > + * Use architecturally required barriers for ordering between system > > +register > > + * accesses, and system registers with respect to device memory */ > > +void set_l2_indirect_reg(u64 reg, u64 val) { > > + unsigned long flags; > > + mb(); > > We didn't need this for the PMU driver, so it's unfortuante that it now has to > pay the cost. > > Can we please factor this mb() into the callers that need it? > > > + raw_spin_lock_irqsave(&l2_access_lock, flags); > > + write_sysreg_s(reg, L2CPUSRSELR_EL1); > > + isb(); > > + write_sysreg_s(val, L2CPUSRDR_EL1); > > + isb(); > > + raw_spin_unlock_irqrestore(&l2_access_lock, flags); } > > +EXPORT_SYMBOL(set_l2_indirect_reg); > > [...] > > > +#ifdef CONFIG_ARCH_QCOM > > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > > +u64 get_l2_indirect_reg(u64 reg_addr); #else static inline void > > +set_l2_indirect_reg(u32 reg_addr, u32 val) {} static inline u32 > > +get_l2_indirect_reg(u32 reg_addr) { > > + return 0; > > +} > > +#endif > > +#endif > > Are there any drivers that will bne built for !CONFIG_ARCH_QCOM that > reference this? > > It might be better to not have the stub versions, so that we get a build-error > if they are erroneously used. > > Thannks, > Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tested COMPILE_TEST and found OK. > -----Original Message----- > From: Stephen Boyd [mailto:sboyd@codeaurora.org] > Sent: Friday, December 22, 2017 4:07 AM > To: Mark Rutland <mark.rutland@arm.com> > Cc: Ilia Lin <ilialin@codeaurora.org>; linux-clk@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-arm-msm@vger.kernel.org; > devicetree@vger.kernel.org; will.deacon@arm.com; > rnayak@codeaurora.org; qualcomm-lt@lists.linaro.org; > celster@codeaurora.org; tfinkel@codeaurora.org > Subject: Re: [PATCH 01/10] soc: qcom: Separate kryo l2 accessors from PMU > driver > > On 12/12, Mark Rutland wrote: > > On Tue, Dec 12, 2017 at 02:31:28PM +0200, Ilia Lin wrote: > > > + * accesses, and system registers with respect to device memory */ > > > +void set_l2_indirect_reg(u64 reg, u64 val) { > > > + unsigned long flags; > > > + mb(); > > > > We didn't need this for the PMU driver, so it's unfortuante that it > > now has to pay the cost. > > > > Can we please factor this mb() into the callers that need it? > > +1 > > > > > > + raw_spin_lock_irqsave(&l2_access_lock, flags); > > > + write_sysreg_s(reg, L2CPUSRSELR_EL1); > > > + isb(); > > > + write_sysreg_s(val, L2CPUSRDR_EL1); > > > + isb(); > > > + raw_spin_unlock_irqrestore(&l2_access_lock, flags); } > > > +EXPORT_SYMBOL(set_l2_indirect_reg); > > > > [...] > > > > > +#ifdef CONFIG_ARCH_QCOM > > > +void set_l2_indirect_reg(u64 reg_addr, u64 val); > > > +u64 get_l2_indirect_reg(u64 reg_addr); #else static inline void > > > +set_l2_indirect_reg(u32 reg_addr, u32 val) {} static inline u32 > > > +get_l2_indirect_reg(u32 reg_addr) { > > > + return 0; > > > +} > > > +#endif > > > +#endif > > > > Are there any drivers that will bne built for !CONFIG_ARCH_QCOM that > > reference this? > > > > It might be better to not have the stub versions, so that we get a > > build-error if they are erroneously used. > > > > Does that approach make COMPILE_TEST break? > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a > Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 2401373..a6a6504 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -144,6 +144,13 @@ config ARCH_REALTEK This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. +config ARCH_MSM8996 + bool "Enable Support for Qualcomm Technologies, Inc. MSM8996" + depends on ARCH_QCOM + help + This enables support for the MSM8996 chipset. If you do not + wish to build a kernel that runs on this chipset, say 'N' here. + config ARCH_ROCKCHIP bool "Rockchip Platforms" select ARCH_HAS_RESET_CONTROLLER diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 4fdc848..ba5f241 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -30,7 +30,7 @@ #include <asm/barrier.h> #include <asm/local64.h> -#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> #define MAX_L2_CTRS 9 @@ -87,9 +87,6 @@ #define L2_COUNTER_RELOAD BIT_ULL(31) #define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63) -#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) -#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) - #define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE) /* @@ -107,49 +104,6 @@ #define L2_EVENT_STREX 0x421 #define L2_EVENT_CLREX 0x422 -static DEFINE_RAW_SPINLOCK(l2_access_lock); - -/** - * set_l2_indirect_reg: write value to an L2 register - * @reg: Address of L2 register. - * @value: Value to be written to register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static void set_l2_indirect_reg(u64 reg, u64 val) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - write_sysreg_s(val, L2CPUSRDR_EL1); - isb(); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); -} - -/** - * get_l2_indirect_reg: read an L2 register value - * @reg: Address of L2 register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static u64 get_l2_indirect_reg(u64 reg) -{ - u64 val; - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - val = read_sysreg_s(L2CPUSRDR_EL1); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); - - return val; -} - struct cluster_pmu; /* diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 40c56f6..2bf8d93 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o +obj-$(CONFIG_ARCH_MSM8996) += kryo-l2-accessors.o diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c new file mode 100644 index 0000000..6be57e6 --- /dev/null +++ b/drivers/soc/qcom/kryo-l2-accessors.c @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2014-2015, 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/spinlock.h> +#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> + +#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) +#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) + +static DEFINE_RAW_SPINLOCK(l2_access_lock); + +/** + * set_l2_indirect_reg: write value to an L2 register + * @reg: Address of L2 register. + * @value: Value to be written to register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +void set_l2_indirect_reg(u64 reg, u64 val) +{ + unsigned long flags; + mb(); + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + write_sysreg_s(val, L2CPUSRDR_EL1); + isb(); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); +} +EXPORT_SYMBOL(set_l2_indirect_reg); + +/** + * get_l2_indirect_reg: read an L2 register value + * @reg: Address of L2 register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +u64 get_l2_indirect_reg(u64 reg) +{ + u64 val; + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + val = read_sysreg_s(L2CPUSRDR_EL1); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); + + return val; +} +EXPORT_SYMBOL(get_l2_indirect_reg); diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h new file mode 100644 index 0000000..2bebce1 --- /dev/null +++ b/include/soc/qcom/kryo-l2-accessors.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H +#define __ASM_ARCH_MSM_MSM_KRYO_L2_ACCESSORS_H + +#ifdef CONFIG_ARCH_QCOM +void set_l2_indirect_reg(u64 reg_addr, u64 val); +u64 get_l2_indirect_reg(u64 reg_addr); +#else +static inline void set_l2_indirect_reg(u32 reg_addr, u32 val) {} +static inline u32 get_l2_indirect_reg(u32 reg_addr) +{ + return 0; +} +#endif +#endif
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> --- arch/arm64/Kconfig.platforms | 7 ++++ drivers/perf/qcom_l2_pmu.c | 48 +-------------------------- drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/kryo-l2-accessors.c | 64 ++++++++++++++++++++++++++++++++++++ include/soc/qcom/kryo-l2-accessors.h | 27 +++++++++++++++ 5 files changed, 100 insertions(+), 47 deletions(-) create mode 100644 drivers/soc/qcom/kryo-l2-accessors.c create mode 100644 include/soc/qcom/kryo-l2-accessors.h