diff mbox

[v3,1/4] crypto: exynos - Support Exynos5250+ SoCs

Message ID 20171212163607.2985-2-l.stelmach@samsung.com (mailing list archive)
State Accepted
Delegated to: Herbert Xu
Headers show

Commit Message

Lukasz Stelmach Dec. 12, 2017, 4:36 p.m. UTC 
Add support for PRNG in Exynos5250+ SoCs.

Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
---
 .../bindings/crypto/samsung,exynos-rng4.txt        |  4 +++-
 drivers/crypto/exynos-rng.c                        | 27 ++++++++++++++++++++--
 2 files changed, 28 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Dec. 13, 2017, 8:06 a.m. UTC | #1 
On Tue, Dec 12, 2017 at 5:36 PM, Łukasz Stelmach <l.stelmach@samsung.com> wrote:
> Add support for PRNG in Exynos5250+ SoCs.
>
> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> ---
>  .../bindings/crypto/samsung,exynos-rng4.txt        |  4 +++-
>  drivers/crypto/exynos-rng.c                        | 27 ++++++++++++++++++++--
>  2 files changed, 28 insertions(+), 3 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt
index 4ca8dd4d7e66..a13fbdb4bd88 100644
--- a/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt
+++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt
@@ -2,7 +2,9 @@  Exynos Pseudo Random Number Generator
 
 Required properties:
 
-- compatible  : Should be "samsung,exynos4-rng".
+- compatible  : One of:
+                - "samsung,exynos4-rng" for Exynos4210 and Exynos4412
+                - "samsung,exynos5250-prng" for Exynos5250+
 - reg         : Specifies base physical address and size of the registers map.
 - clocks      : Phandle to clock-controller plus clock-specifier pair.
 - clock-names : "secss" as a clock name.
diff --git a/drivers/crypto/exynos-rng.c b/drivers/crypto/exynos-rng.c
index ed6ba796ad71..825c09619eb8 100644
--- a/drivers/crypto/exynos-rng.c
+++ b/drivers/crypto/exynos-rng.c
@@ -22,12 +22,17 @@ 
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include <crypto/internal/rng.h>
 
 #define EXYNOS_RNG_CONTROL		0x0
 #define EXYNOS_RNG_STATUS		0x10
+
+#define EXYNOS_RNG_SEED_CONF		0x14
+#define EXYNOS_RNG_GEN_PRNG	        BIT(1)
+
 #define EXYNOS_RNG_SEED_BASE		0x140
 #define EXYNOS_RNG_SEED(n)		(EXYNOS_RNG_SEED_BASE + (n * 0x4))
 #define EXYNOS_RNG_OUT_BASE		0x160
@@ -43,6 +48,12 @@ 
 #define EXYNOS_RNG_SEED_REGS		5
 #define EXYNOS_RNG_SEED_SIZE		(EXYNOS_RNG_SEED_REGS * 4)
 
+enum exynos_prng_type {
+	EXYNOS_PRNG_UNKNOWN = 0,
+	EXYNOS_PRNG_EXYNOS4,
+	EXYNOS_PRNG_EXYNOS5,
+};
+
 /*
  * Driver re-seeds itself with generated random numbers to increase
  * the randomness.
@@ -63,6 +74,7 @@  struct exynos_rng_ctx {
 /* Device associated memory */
 struct exynos_rng_dev {
 	struct device			*dev;
+	enum exynos_prng_type		type;
 	void __iomem			*mem;
 	struct clk			*clk;
 	/* Generated numbers stored for seeding during resume */
@@ -160,8 +172,13 @@  static int exynos_rng_get_random(struct exynos_rng_dev *rng,
 {
 	int retry = EXYNOS_RNG_WAIT_RETRIES;
 
-	exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START,
-			  EXYNOS_RNG_CONTROL);
+	if (rng->type == EXYNOS_PRNG_EXYNOS4) {
+		exynos_rng_writel(rng, EXYNOS_RNG_CONTROL_START,
+				  EXYNOS_RNG_CONTROL);
+	} else if (rng->type == EXYNOS_PRNG_EXYNOS5) {
+		exynos_rng_writel(rng, EXYNOS_RNG_GEN_PRNG,
+				  EXYNOS_RNG_SEED_CONF);
+	}
 
 	while (!(exynos_rng_readl(rng,
 			EXYNOS_RNG_STATUS) & EXYNOS_RNG_STATUS_RNG_DONE) && --retry)
@@ -279,6 +296,8 @@  static int exynos_rng_probe(struct platform_device *pdev)
 	if (!rng)
 		return -ENOMEM;
 
+	rng->type = (enum exynos_prng_type)of_device_get_match_data(&pdev->dev);
+
 	rng->dev = &pdev->dev;
 	rng->clk = devm_clk_get(&pdev->dev, "secss");
 	if (IS_ERR(rng->clk)) {
@@ -367,6 +386,10 @@  static SIMPLE_DEV_PM_OPS(exynos_rng_pm_ops, exynos_rng_suspend,
 static const struct of_device_id exynos_rng_dt_match[] = {
 	{
 		.compatible = "samsung,exynos4-rng",
+		.data = (const void *)EXYNOS_PRNG_EXYNOS4,
+	}, {
+		.compatible = "samsung,exynos5250-prng",
+		.data = (const void *)EXYNOS_PRNG_EXYNOS5,
 	},
 	{ },
 };