| Message ID | 20171217224547.21481-5-embed3d@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Dec 17, 2017 at 11:45:46PM +0100, Philipp Rossak wrote: > The ir interface is like on the H3 located at 0x01f02000 and is exactly > the same. This patch adds support for the ir interface on the A83T. > > Signed-off-by: Philipp Rossak <embed3d@gmail.com> > --- > arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi > index 954c2393325f..9e7ed3b9a6b8 100644 > --- a/arch/arm/boot/dts/sun8i-a83t.dtsi > +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi > @@ -503,6 +503,16 @@ > #reset-cells = <1>; > }; > > + ir: ir@01f02000 { > + compatible = "allwinner,sun5i-a13-ir"; > + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; > + clock-names = "apb", "ir"; > + resets = <&r_ccu RST_APB0_IR>; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x01f02000 0x40>; The size should be the size of the whole memory block, not just the registers you need. Maxime
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 954c2393325f..9e7ed3b9a6b8 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -503,6 +503,16 @@ #reset-cells = <1>; }; + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>;
The ir interface is like on the H3 located at 0x01f02000 and is exactly the same. This patch adds support for the ir interface on the A83T. Signed-off-by: Philipp Rossak <embed3d@gmail.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)