diff mbox

[V1,0/1] Fix kernel panic caused by device ID duplication presented to the IOMMU

Message ID 7f7fca76-88f8-6ee7-c402-fe4300c62253@arm.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Robin Murphy Dec. 19, 2017, 4:34 p.m. UTC 
Hi Tomasz,

On 19/12/17 15:13, Tomasz Nowicki wrote:
> Here is my lspci output of ThunderX2 for which I am observing kernel panic coming from
> SMMUv3 driver -> arm_smmu_write_strtab_ent() -> BUG_ON(ste_live):
> 
> # lspci -vt
> -[0000:00]-+-00.0-[01-1f]--+ [...]
>                             + [...]
>                             \-00.0-[1e-1f]----00.0-[1f]----00.0  ASPEED Technology, Inc. ASPEED Graphics Family
> 
> ASP device -> 1f:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family
> PCI-Express to PCI/PCI-X Bridge -> 1e:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
>                             
> While setting up ASP device SID in IORT dirver:
> iort_iommu_configure() -> pci_for_each_dma_alias()
> we need to walk up and iterate over each device which alias transaction from
> downstream devices.
> 
> AST device (1f:00.0) gets BDF=0x1f00 and corresponding SID=0x1f00 from IORT.
> Bridge (1e:00.0) is the first alias. Following PCI Express to PCI/PCI-X Bridge
> spec: PCIe-to-PCI/X bridges alias transactions from downstream devices using
> the subordinate bus number. For bridge (1e:00.0), the subordinate is equal
> to 0x1f. This gives BDF=0x1f00 and SID=1f00 which is the same as downstream
> device. So it is possible to have two identical SIDs. The question is what we
> should do about such case. Presented patch prevents from registering the same
> ID so that SMMUv3 is not complaining later on.

Ooh, subtle :( There is logic in arm_smmu_attach_device() to tolerate
grouped devices aliasing to the same ID, but I guess I overlooked the
distinction of a device sharing an alias ID with itself. I'm not sure
I really like trying to work around this in generic code, since
fwspec->ids is essentially opaque data in a driver-specific format - in
theory a driver is free to encode a single logical ID into multiple
fwspec elements (I think I did that in an early draft of SMMUv2 SMR
support), at which point this approach might corrupt things massively.

Does the (untested) diff below suffice?

Robin.

----->8-----diff --git a/drivers/iommu/arm-smmu-v3.c 
b/drivers/iommu/arm-smmu-v3.c
index f122071688fd..d8a730d83401 100644

@@ -1739,6 +1739,13 @@ static void arm_smmu_install_ste_for_dev(struct 
iommu_fwspec *fwspec)
  		u32 sid = fwspec->ids[i];
  		__le64 *step = arm_smmu_get_step_for_sid(smmu, sid);

+		/* Bridged PCI devices may end up with duplicated IDs */
+		for (j = 0; j < i; j++)
+			if (fwspec->ids[j] == sid)
+				break;
+		if (j < i)
+			continue;
+
  		arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
  	}
  }
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Tomasz Nowicki Dec. 20, 2017, 10:27 a.m. UTC | #1 
Hi Robin,

On 19.12.2017 17:34, Robin Murphy wrote:
> Hi Tomasz,
> 
> On 19/12/17 15:13, Tomasz Nowicki wrote:
>> Here is my lspci output of ThunderX2 for which I am observing kernel 
>> panic coming from
>> SMMUv3 driver -> arm_smmu_write_strtab_ent() -> BUG_ON(ste_live):
>>
>> # lspci -vt
>> -[0000:00]-+-00.0-[01-1f]--+ [...]
>>                             + [...]
>>                             \-00.0-[1e-1f]----00.0-[1f]----00.0  
>> ASPEED Technology, Inc. ASPEED Graphics Family
>>
>> ASP device -> 1f:00.0 VGA compatible controller: ASPEED Technology, 
>> Inc. ASPEED Graphics Family
>> PCI-Express to PCI/PCI-X Bridge -> 1e:00.0 PCI bridge: ASPEED 
>> Technology, Inc. AST1150 PCI-to-PCI Bridge
>> While setting up ASP device SID in IORT dirver:
>> iort_iommu_configure() -> pci_for_each_dma_alias()
>> we need to walk up and iterate over each device which alias 
>> transaction from
>> downstream devices.
>>
>> AST device (1f:00.0) gets BDF=0x1f00 and corresponding SID=0x1f00 from 
>> IORT.
>> Bridge (1e:00.0) is the first alias. Following PCI Express to 
>> PCI/PCI-X Bridge
>> spec: PCIe-to-PCI/X bridges alias transactions from downstream devices 
>> using
>> the subordinate bus number. For bridge (1e:00.0), the subordinate is 
>> equal
>> to 0x1f. This gives BDF=0x1f00 and SID=1f00 which is the same as 
>> downstream
>> device. So it is possible to have two identical SIDs. The question is 
>> what we
>> should do about such case. Presented patch prevents from registering 
>> the same
>> ID so that SMMUv3 is not complaining later on.
> 
> Ooh, subtle :( There is logic in arm_smmu_attach_device() to tolerate
> grouped devices aliasing to the same ID, but I guess I overlooked the
> distinction of a device sharing an alias ID with itself. I'm not sure
> I really like trying to work around this in generic code, since
> fwspec->ids is essentially opaque data in a driver-specific format - in
> theory a driver is free to encode a single logical ID into multiple
> fwspec elements (I think I did that in an early draft of SMMUv2 SMR
> support), at which point this approach might corrupt things massively.

I don't have strong favourite here, the fix in SMMUv3 driver would work 
too. Initially we can fix things for SMMUv3 only and if ever face the 
same issue for other IOMMU driver, then we can move it to generic layer.

> 
> Does the (untested) diff below suffice?
> 
> Robin.
> 
> ----->8-----diff --git a/drivers/iommu/arm-smmu-v3.c 
> b/drivers/iommu/arm-smmu-v3.c
> index f122071688fd..d8a730d83401 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -1731,7 +1731,7 @@ static __le64 *arm_smmu_get_step_for_sid(struct 
> arm_smmu_device *smmu, u32 sid)
> 
>   static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
>   {
> -    int i;
> +    int i, j;
>       struct arm_smmu_master_data *master = fwspec->iommu_priv;
>       struct arm_smmu_device *smmu = master->smmu;
> 
> @@ -1739,6 +1739,13 @@ static void arm_smmu_install_ste_for_dev(struct 
> iommu_fwspec *fwspec)
>           u32 sid = fwspec->ids[i];
>           __le64 *step = arm_smmu_get_step_for_sid(smmu, sid);
> 
> +        /* Bridged PCI devices may end up with duplicated IDs */
> +        for (j = 0; j < i; j++)
> +            if (fwspec->ids[j] == sid)
> +                break;
> +        if (j < i)
> +            continue;
> +
>           arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
>       }
>   }

Yes, worked for me.

Thanks,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tomasz Nowicki Dec. 22, 2017, 11:29 a.m. UTC | #2 
Hi Robin,

On 19.12.2017 17:34, Robin Murphy wrote:
> Hi Tomasz,
> 
> On 19/12/17 15:13, Tomasz Nowicki wrote:
>> Here is my lspci output of ThunderX2 for which I am observing kernel 
>> panic coming from
>> SMMUv3 driver -> arm_smmu_write_strtab_ent() -> BUG_ON(ste_live):
>>
>> # lspci -vt
>> -[0000:00]-+-00.0-[01-1f]--+ [...]
>>                             + [...]
>>                             \-00.0-[1e-1f]----00.0-[1f]----00.0  
>> ASPEED Technology, Inc. ASPEED Graphics Family
>>
>> ASP device -> 1f:00.0 VGA compatible controller: ASPEED Technology, 
>> Inc. ASPEED Graphics Family
>> PCI-Express to PCI/PCI-X Bridge -> 1e:00.0 PCI bridge: ASPEED 
>> Technology, Inc. AST1150 PCI-to-PCI Bridge
>> While setting up ASP device SID in IORT dirver:
>> iort_iommu_configure() -> pci_for_each_dma_alias()
>> we need to walk up and iterate over each device which alias 
>> transaction from
>> downstream devices.
>>
>> AST device (1f:00.0) gets BDF=0x1f00 and corresponding SID=0x1f00 from 
>> IORT.
>> Bridge (1e:00.0) is the first alias. Following PCI Express to 
>> PCI/PCI-X Bridge
>> spec: PCIe-to-PCI/X bridges alias transactions from downstream devices 
>> using
>> the subordinate bus number. For bridge (1e:00.0), the subordinate is 
>> equal
>> to 0x1f. This gives BDF=0x1f00 and SID=1f00 which is the same as 
>> downstream
>> device. So it is possible to have two identical SIDs. The question is 
>> what we
>> should do about such case. Presented patch prevents from registering 
>> the same
>> ID so that SMMUv3 is not complaining later on.
> 
> Ooh, subtle :( There is logic in arm_smmu_attach_device() to tolerate
> grouped devices aliasing to the same ID, but I guess I overlooked the
> distinction of a device sharing an alias ID with itself. I'm not sure
> I really like trying to work around this in generic code, since
> fwspec->ids is essentially opaque data in a driver-specific format - in
> theory a driver is free to encode a single logical ID into multiple
> fwspec elements (I think I did that in an early draft of SMMUv2 SMR
> support), at which point this approach might corrupt things massively.
> 
> Does the (untested) diff below suffice?
> 
> Robin.
> 
> ----->8-----diff --git a/drivers/iommu/arm-smmu-v3.c 
> b/drivers/iommu/arm-smmu-v3.c
> index f122071688fd..d8a730d83401 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -1731,7 +1731,7 @@ static __le64 *arm_smmu_get_step_for_sid(struct 
> arm_smmu_device *smmu, u32 sid)
> 
>   static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
>   {
> -    int i;
> +    int i, j;
>       struct arm_smmu_master_data *master = fwspec->iommu_priv;
>       struct arm_smmu_device *smmu = master->smmu;
> 
> @@ -1739,6 +1739,13 @@ static void arm_smmu_install_ste_for_dev(struct 
> iommu_fwspec *fwspec)
>           u32 sid = fwspec->ids[i];
>           __le64 *step = arm_smmu_get_step_for_sid(smmu, sid);
> 
> +        /* Bridged PCI devices may end up with duplicated IDs */
> +        for (j = 0; j < i; j++)
> +            if (fwspec->ids[j] == sid)
> +                break;
> +        if (j < i)
> +            continue;
> +
>           arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
>       }
>   }

The patch works for me:

Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>

The bug causes a regression on our platform and would be nice to fix it 
for 4.15. Since no more comments so far, IMO we can put the fix to 
SMMUv3 driver. Do you prefer to send patch yourself or would you like me 
to do it?

Thanks,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jayachandran C Dec. 27, 2017, 7:34 p.m. UTC | #3 
Hi Robin,
On Tue, Dec 19, 2017 at 04:34:46PM +0000, Robin Murphy wrote:
> Hi Tomasz,
> 
> On 19/12/17 15:13, Tomasz Nowicki wrote:
> >Here is my lspci output of ThunderX2 for which I am observing kernel panic coming from
> >SMMUv3 driver -> arm_smmu_write_strtab_ent() -> BUG_ON(ste_live):
> >
> ># lspci -vt
> >-[0000:00]-+-00.0-[01-1f]--+ [...]
> >                            + [...]
> >                            \-00.0-[1e-1f]----00.0-[1f]----00.0  ASPEED Technology, Inc. ASPEED Graphics Family
> >
> >ASP device -> 1f:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family
> >PCI-Express to PCI/PCI-X Bridge -> 1e:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
> >While setting up ASP device SID in IORT dirver:
> >iort_iommu_configure() -> pci_for_each_dma_alias()
> >we need to walk up and iterate over each device which alias transaction from
> >downstream devices.
> >
> >AST device (1f:00.0) gets BDF=0x1f00 and corresponding SID=0x1f00 from IORT.
> >Bridge (1e:00.0) is the first alias. Following PCI Express to PCI/PCI-X Bridge
> >spec: PCIe-to-PCI/X bridges alias transactions from downstream devices using
> >the subordinate bus number. For bridge (1e:00.0), the subordinate is equal
> >to 0x1f. This gives BDF=0x1f00 and SID=1f00 which is the same as downstream
> >device. So it is possible to have two identical SIDs. The question is what we
> >should do about such case. Presented patch prevents from registering the same
> >ID so that SMMUv3 is not complaining later on.
> 
> Ooh, subtle :( There is logic in arm_smmu_attach_device() to tolerate
> grouped devices aliasing to the same ID, but I guess I overlooked the
> distinction of a device sharing an alias ID with itself. I'm not sure
> I really like trying to work around this in generic code, since
> fwspec->ids is essentially opaque data in a driver-specific format - in
> theory a driver is free to encode a single logical ID into multiple
> fwspec elements (I think I did that in an early draft of SMMUv2 SMR
> support), at which point this approach might corrupt things massively.
> 
> Does the (untested) diff below suffice?
> 
> Robin.
> 
> ----->8-----diff --git a/drivers/iommu/arm-smmu-v3.c
> b/drivers/iommu/arm-smmu-v3.c
> index f122071688fd..d8a730d83401 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -1731,7 +1731,7 @@ static __le64 *arm_smmu_get_step_for_sid(struct
> arm_smmu_device *smmu, u32 sid)
> 
>  static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
>  {
> -	int i;
> +	int i, j;
>  	struct arm_smmu_master_data *master = fwspec->iommu_priv;
>  	struct arm_smmu_device *smmu = master->smmu;
> 
> @@ -1739,6 +1739,13 @@ static void arm_smmu_install_ste_for_dev(struct
> iommu_fwspec *fwspec)
>  		u32 sid = fwspec->ids[i];
>  		__le64 *step = arm_smmu_get_step_for_sid(smmu, sid);
> 
> +		/* Bridged PCI devices may end up with duplicated IDs */
> +		for (j = 0; j < i; j++)
> +			if (fwspec->ids[j] == sid)
> +				break;
> +		if (j < i)
> +			continue;
> +
>  		arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
>  	}
>  }

Here is another tested by if you need one more:
Tested-by: Jayachandran C. <jnair@caviumnetworks.com>

This fixes the crash below seen in ThunderX2 boards with Aspeed BMC (when
booted without iommu.passthrough). Since this is a regression that breaks
bootup on the platform, can you consider submitting this for the 4.15 cycle?

[   84.729351] ------------[ cut here ]------------
[   84.729354] kernel BUG at /home/ubuntu/linux/drivers/iommu/arm-smmu-v3.c:1201!
[   84.729358] Internal error: Oops - BUG: 0 [#1] SMP
[   84.729360] Modules linked in: ast(+) ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops qede(+) drm q
ed bnx2x(+) mpt3sas raid_class scsi_transport_sas sdhci_acpi mdio sdhci libcrc32c gpio_xlp
[   84.729375] CPU: 190 PID: 1725 Comm: systemd-udevd Not tainted 4.15.0-rc5 #37
[   84.729376] Hardware name: Cavium Inc. Unknown/Unknown, BIOS 1.0 11/08/2017
[   84.729379] pstate: 80400009 (Nzcv daif +PAN -UAO)
[   84.729388] pc : arm_smmu_write_strtab_ent+0x1f0/0x1f8
[   84.729391] lr : arm_smmu_install_ste_for_dev+0x70/0xc8
[   84.729392] sp : ffff00001f6e3730
[   84.729393] x29: ffff00001f6e3730 x28: ffff809ecc0d2268
[   84.729395] x27: 0000000000000018 x26: ffff00001f6e3910
[   84.729397] x25: ffff809ecc0d2238 x24: ffff809ecdc94158
[   84.729398] x23: 0000000000000018 x22: 0000000000001d00
[   84.729400] x21: ffff809ecdc90018 x20: ffff809ecb5ef288
[   84.729401] x19: ffff80beca480000 x18: ffff0000093b8c08
[   84.729402] x17: ffff000008aeab70 x16: ffff00001f6e3a20
[   84.729404] x15: 0000000000000000 x14: dead000000000100
[   84.729405] x13: dead000000000200 x12: 0000000000000020
[   84.729407] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[   84.729408] x9 : 0000000000000000 x8 : 0000000000000000
[   84.729410] x7 : 0000000000000100 x6 : 0000000000000015
[   84.729411] x5 : 0000000000000015 x4 : 0000000000000002
[   84.729413] x3 : ffff809ecb5ef288 x2 : 0000000000000001
[   84.729414] x1 : ffff000008691e30 x0 : ffff809ecc0d2238
[   84.729418] Process systemd-udevd (pid: 1725, stack limit = 0x000000002c585821)
[   84.729420] Call trace:
[   84.729423]  arm_smmu_write_strtab_ent+0x1f0/0x1f8
[   84.729425]  arm_smmu_install_ste_for_dev+0x70/0xc8
[   84.729426]  arm_smmu_attach_dev+0x100/0x2f8
[   84.729431]  __iommu_attach_device+0x54/0xe0
[   84.729433]  iommu_group_add_device+0x150/0x428
[   84.729435]  iommu_group_get_for_dev+0x84/0x180
[   84.729436]  arm_smmu_add_device+0x138/0x240
[   84.729445]  iort_iommu_configure+0x138/0x188
[   84.729452]  acpi_dma_configure+0x3c/0x80
[   84.729456]  dma_configure+0xb0/0xe0
[   84.729462]  driver_probe_device+0x1f0/0x4a8
[   84.729464]  __driver_attach+0x124/0x128
[   84.729466]  bus_for_each_dev+0x70/0xb0
[   84.729467]  driver_attach+0x30/0x40
[   84.729469]  bus_add_driver+0x248/0x2b8
[   84.729471]  driver_register+0x68/0x100
[   84.729478]  __pci_register_driver+0x5c/0x70
[   84.729488]  ast_init+0x30/0x1000 [ast]
[   84.729494]  do_one_initcall+0x5c/0x168
[   84.729501]  do_init_module+0x64/0x1f4
[   84.729502]  load_module+0x1e64/0x21e8
[   84.729503]  SyS_finit_module+0x108/0x118
[   84.729505]  el0_svc_naked+0x20/0x24
[   84.729508] Code: 34ffff82 d4210000 d2800120 17ffffd8 (d4210000)

Thanks,
JC.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1731,7 +1731,7 @@  static __le64 *arm_smmu_get_step_for_sid(struct 
arm_smmu_device *smmu, u32 sid)

  static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
  {
-	int i;
+	int i, j;
  	struct arm_smmu_master_data *master = fwspec->iommu_priv;
  	struct arm_smmu_device *smmu = master->smmu;